Search

Abstract Background Chronic obstructive pulmonary disease (COPD) is a significant public health problem characterized by persistent airflow limitation. Despite previous research into the pathogenesis of COPD, a comprehensive understanding of the cell-type-specific mechanisms in COPD remains lacking. Recent studies have implicated Rab GTPases in regulating chronic immune response and inflammation via multiple pathways. In this study, the molecular regulating mechanism of RAB32 in COPD was investigated by multiple bioinformatics mining and experimental verification. Methods We collected lung tissue surgical specimens from Zhongshan Hospital, Fudan University, and RT-qPCR and western blotting were used to detect the expression of Rabs in COPD lung tissues. Four COPD microarray datasets from the Gene Expression Omnibus (GEO) were analyzed. COPD-related epithelial cell scRNA-seq data was obtained from the GSE173896 dataset. Weighted gene co-expression network analysis (WGCNA), mfuzz cluster, and Spearman correlation analysis were combined to obtain the regulatory network of RAB32 in COPD. The slingshot algorithm was used to identify the regulatory molecule, and the co-localization of RAB32 and GPRC5A was observed with immunofluorescence. Results WGCNA identified 771 key module genes significantly associated with the occurrence of COPD, including five Rab genes. RAB32 was up-regulated in lung tissues from subjects with COPD as contrast to those without COPD on both mRNA and protein levels. Integrating the results of WGCNA, Mfuzz clusters, and Spearman analysis, nine potential interacting genes with RAB32 were identified. Among these genes, GPRC5A exhibited a similar molecular expression pattern to RAB32. Co-expression density analysis at the cell level demonstrated that the co-expression density of RAB32 and GPRC5A was higher in type I alveolar epithelial cells (AT1s) than in type II alveolar epithelial cells (AT2s). The immunofluorescence also confirmed the co-localization of RAB32 and GPRC5A, and the Pearson correlation analysis found the relationship between RAB32 and GPRC5A was significantly stronger in the COPD lungs (r = 0.65) compared to the non-COPD lungs (r = 0.33). Conclusions Our study marked endeavor to delineate the molecular regulatory axis of RAB32 in COPD by employing diverse methods and identifying GPRC5A as a potential interacting molecule with RAB32. These findings offered novel perspectives on the mechanism of COPD.

The paper investigates the issue of post-impact fatigue damage of the 2060 aluminium–lithium alloy, a representative material of third-generation aluminium–lithium alloys extensively employed in the fuselage of C919 aircraft due to its notable attributes of high specific stiffness and strength. Initial impact damage is identified utilizing a residual stress–strain field obtained from a quasi-static simulation. Then, the continuum damage mechanics approach is applied to predict the fatigue life of the impacted 2060 aluminium–lithium alloy plates accounting for the combined effects of residual stress, plastic damage, and fatigue loading. A comparative analysis between calculated and experimental results is conducted to validate the efficacy of the proposed methodology.

Deep tooth decay approaching the pulp may develop into pulpitis; to prevent this, pulp cells need to balance the rapid immune response to avoid rapid swelling of the pulp. Current treatment of deep decay that approaches the pulp involves the application of drugs that induce low‐level inflammation in the dental pulp to promote its repair, but this treatment is sometimes insufficient. However, the unsuccessful treatment often resulted in pulpitis. The C5a‐C5aR is the initial stage of the immune cascade response. Blocking the binding of C5a‐C5aR can slow the immune response in the narrow pulp cavity, so that dental pulp cells have enough time to proliferate, migrate, and differentiate. In this study, we compared lipoteichoic acid (LTA) and lipopolysaccharides (LPS) at different concentrations and time points and used the C5aR antagonist W54011 to block the C5a‐C5aR axis. The blocking effect was detected by analyzing the expression of C5a, C5aR, interleukin (IL)‐6, and Toll‐like receptors 2 and 4 (TLR‐2, 4). Next, we determined the optimal concentration and duration of LTA and LPS treatment in combination with W54011. Based on our results, we selected 1.0 μg·mL−1 LPS treatment for 48 h to generate an inflammatory model of human dental pulp cells. We then regrouped the cells and conducted expression analyses to monitor the expression of C5a, C5aR, IL‐6, and TLR‐4 at the protein and mRNA levels. LPS stimulation for 48 h and treatment with W54011 for 48 h effectively inhibited inflammation and did not affect C5a expression. This study provides a basis for follow‐up studies of W54011 in dental pulp cells.

Highlights It is the first time to prove the confirm the endothelial glycocalyx impairment in COPD. FGF10 attenuates the development of emphysema and the shedding of glycocalyx induced by CSE in vivo. FGF10 alleviates smoke-induced endothelial apoptosis and glycocalyx repair through FGFR1/ERK/SOX9/HS6ST1 signaling.

Abstract Background Science identity is widely regarded as a key predictor of students’ persistence in STEM fields, while the brain drain in STEM fields is an urgent issue for countries to address. Based on previous studies, it is logical to suggest that epistemological beliefs about science and reflective thinking contribute to the development of science identity. However, few empirical studies have focused on the relationship between these three variables. Therefore, using structural equation modeling, the present study constructed a model to explore the relationship between epistemological beliefs, reflective thinking, three science identity shaping constructs (interest, competence/performance beliefs, external recognition), and the holistic impression on science identity (a single indicator). Results The results indicated that the epistemological beliefs were positively correlated with interest and reflective thinking, as well as the direct effects of reflective thinking on interest or competence/performance beliefs were significant. In terms of indirect effect, interest plays a mediating role in the relationship between epistemological beliefs and holistic impression on science identity, while the mediation effect of competence/performance beliefs was not significant. Epistemological beliefs contributed to the holistic impression on science identity via reflective thinking, competence/performance beliefs, and interest or external recognition. Conclusion The results of this study reveal that epistemological beliefs and reflective thinking have a direct effect on science identity. In addition, epistemological beliefs have an indirect effect on scientific identity through reflective thinking. These provide insights for educators to figure out how to develop students’ science identity by enhancing their epistemological beliefs and reflective thinking. Practical educational implications are also further discussed in the present study.

Study region: Lake Chaohu is a typically large shallow freshwater lake in China, experiencing long-term eutrophication and a short period of drought. Study focus: This study employs a three-dimensional (3-D) hydrodynamic-ecological model to assess the impacts of water transfer on lake flow, water quality, and their relationship, and then reveals optimal strategies for achieving improved water quality in Lake Chaohu. New hydrological insights for the region: Results indicated that clean water transfer could dramatically increase flow rate and decrease nutrient concentrations near the water transfer inlets, while the grade level of lake water quality is not changed. The degree of improvement in water quality parameters is not always proportional to lake flow rate. A clean water transfer through the eastern route (ZH) has the largest improvement effect on the average flow rate and water quality (total nitrogen (TN) and total phosphorus (TP)) of the entire lake. Winter water transfer improves TN and TP better than summer, while the opposite for ammonia nitrogen (NH3-N). Decrease of wind speed is essential for mitigating nutrient accumulation in western lake’s heavily polluted bay through weakening the reverse circulation and the northwest flow. Water transfer operations are revealed to improve water quality in Lake Chaohu: conduct water transfer through ZH in winter, strictly control NH3-N concentration in the donating water, and combine the effects of the low east wind.

A novel fatigue evolution model considering the effect of defect size and additive manufacturing building direction based on the theories of continuum damage mechanics and its numerical implementation in ABAQUS is proposed in this paper. First, the constitutive model, fatigue damage evolution model and their parameter calibration methods are presented. Second, using the ABAQUS platform, the proposed model is implemented with user-defined subroutines. After that, based on the proposed model and its numerical implementation, the fatigue life of additively manufactured AlSi10Mg is predicted and its applicability is verified through experimental results. Finally, a support vector regression model is established to predict the fatigue life, and its results are compared to those of the numerical finite element method. The results show that the support vector regression model makes better predictions than the finite element method.

Abstract Background During the process of deep decay, when decay approaches the pulp, an immune response is triggered inside the pulp, which activates the complement cascade. The effect of complement component 5a (C5a) on the differentiation of dental pulp mesenchymal stem cells (DPSCs) is related to dentin reparation. The aim of the present study was to stimulate DPSCs with different concentrations of C5a and evaluate the differentiation of odontoblasts using dentin sialoprotein (DSP). Methods DPSCs were divided into the following six groups: (i) Control; (ii) DPSCs treated with 50 ng/ml C5a; (iii) DPSCs treated with 100 ng/ml C5a; (iv) DPSCs treated with 200 ng/ml C5a; (v) DPSCs treated with 300 ng/ml C5a; and (vi) DPSCs treated with 400 ng/ml C5a. Flow cytometry and multilineage differentiation potential were used to identify DPSCs. Mineralization induction, Real-time PCR and Western blot were conducted to evaluate the differentiation of odontoblast in the 6 groups. Result DPSCs can express mesenchymal stem cell markers, including CD105, CD90, CD73 and, a less common marker, mesenchymal stromal cell antigen-1. In addition, DPSCs can differentiate into adipocytes, neurocytes, chondrocytes and odontoblasts. All six groups formed mineralized nodules after 28 days of culture. Reverse transcription-quantitative PCR and western blotting indicated that the high concentration C5a groups expressed higher DSP levels and promoted DPSC differentiation, whereas the low concentration C5a groups displayed an inhibitory effect. Conclusion In this study, the increasing concentration of C5a, which accompanies the immune process in the dental pulp, has demonstrated an enhancing effect on odontoblast differentiation at higher C5a concentrations in vitro.

As a popular technique, additive manufacturing (AM) has garnered extensive utilization in various engineering domains. Given that numerous AM metal components are exposed to fatigue loads, it is of significant importance to investigate the life prediction methodology. This study aims to investigate the high-cycle fatigue (HCF) behavior of AM AlSi10Mg, taking into account the influences of powder size and fatigue damage, and a novel ML-based approach for life prediction is presented. First, the damage-coupled constitutive model and fatigue damage model are derived, and the Particle Swarm Optimization method is employed for the material parameters’ calibration of M AlSi10Mg. Second, the numerical implementation of theoretical models is carried out via the development of a user-defined material subroutine. The predicted fatigue lives of AM AlSi10Mg with varying powder sizes fall within the triple error band, which verifies the numerical method and the calibrated material parameters. After that, the machine learning approach for HCF life prediction is presented, and the Random Forest (RF) and K-Nearest Neighbor (KNN) models are employed to predict the fatigue lives of AM AlSi10Mg. The RF model achieves a smaller MSE and a larger R2 value compared to the KNN model, signifying its superior performance in predicting the overall behavior of AM AlSi10Mg. Under the same maximum stress, a decrease in the stress ratio from 0.5 to −1 leads to a reduction in fatigue life for both powder sizes. As the powder size decreases, the rate of damage evolution accelerates, leading to shorter fatigue life.

The mental health problems have been increasingly threatening the development of adolescence in China, it is very necessary to explore the protective factors preventing adolescents' negative mental health. Previous studies suggested that growth mindset benefits mental health. However, the internal psychological mechanism underlying this relationship is still unclear. This study investigated the relation between growth mindset and negative mental health among Chinese adolescence, and simultaneously tested the mediating effect of psychological resilience and the moderating role of gender in the mediation process of this relation. A total of 1204 middle school students (624 male students and 580 female students) in China completed measures on growth mindset, psychological resilience, and negative mental health. The results revealed that growth mindset not only directly predicted negative mental health, but also indirectly predicted negative mental health through the mediating path of psychological resilience. Moreover, the mediating effect of psychological resilience in the relationship between growth mindset and negative mental health was moderated for females and not males. These findings indicated that intervention focus on growth mindset could improve psychological resilience and prevent negative mental health among middle school students.

Abstract Background Clinical questionnaires are mainly applied as screening tools for identification of the Obstructive sleep apnea (OSA) patients. Little attention has been paid to assess the body functions and health status of the patients. International Classification of Functioning, Disability and Health (ICF) was designed for better understanding and describing functioning and disability of patients. This study adopted the Brief ICF-Sleep Disorders and Obesity Core Set to evaluate the impairment of functioning and health status of OSA patients. Methods Five hundred ninety-two participants were enrolled in this cross-sectional study. Data were collected using Brief ICF-Sleep Disorders and Obesity Core Set Polysomnography was performed and basic characteristics of the patients were recorded. Results The scores for the component Body Functions and Code b130, b134, b140, b440, b530, s330, d160, d240, d450 of the two core sets were significantly different among the patients divided by apnea-hypopnea index (AHI) or oxygen saturation (SaO2) nadir, but the frequency of code s330, d160, d240, d450 was low. The Body Functions component of the both sets were closely related to neck circumference (NC), body mass index (BMI), apnea-hypopnea index (AHI) of the OSA patients. Body Functions of the Brief ICF-Sleep Disorders performed better with a threshold of 4 with sensitivity, specificity and area under the receiver operating characteristic curve (AUC) as 0.62, 0.74, 0.68(AHI ≥ 5), 0.69, 0.63, 0.66 (AHI ≥ 15), 0.75, 0.56, 0.66 (AHI ≥ 30), 0.56, 0.70, 0.63 (SaO2 nadir≤90%), 0.67, 0.66, 0.66 (SaO2 nadir

Because the incidence of endometrial cancer is notably increasing worldwide, it has become the leading gynecologic cancer in the United States. Standard treatment results in the loss of reproductive function in women of childbearing age. Furthermore, advanced cancer stages are associated with poor overall survival. The aim of this study was to explore the abnormal expression profile of genes during the development of endometrial cancer, which is essential to provide a better understanding of the mechanisms involved. Five pairs of endometrial cancer tissues and normal endometrial tissues were subjected to next-generation transcriptome sequencing technology. Quantitative real-time PCR (RT-qPCR) was performed to validate the expression profile of key differentially expressed genes (2.0-fold change, adj. p < 0.05) (DEGs) identified in the RNA-seq result. GO and KEGG pathways were used for bioinformatic analyses. The transcriptomic sequencing results showed 1153 DEGs, including 673 upregulated and 480 downregulated genes, in the EC specimens. Decreased expression of ID1, IGF1, GDF7, SMAD9, TGF-beta and WNT4, as well as GDF5, INHBA and ERBB4 overexpression, were confirmed in EC using RT-qPCR. Additionally, EC tissue exhibited marked enrichment in genes promoting cellular adhesion, proliferation, migration and plasma membrane. KEGG analysis revealed changes in various pathways, such as the TGF-beta, PI3K-Akt, Wnt, and estrogen pathways. Our data describe the molecular events involved in the pathogenesis of EC, which may be potential diagnostic markers and targets of therapeutic interventions.

National attention has been given to science, technology, engineering, and mathematics (STEM) education, which is well recognized as an effective way to cultivate the key competencies of 21st-century talents. However, current STEM education falls short of the desired results. The fundamental reason is that there has not been a clearly and structurally explained systematic construction and effective implementation of STEM curricula. Accordingly, this article systematically expounds on the construction of the STEM curricula system from four aspects. Specifically, we first proposed the components of the STEM competencies as the goal of STEM education to provide a guiding direction for other parts of the design of the STEM curricula. Then, we elaborated on how to cultivate the STEM competencies from two aspects: the design principles of the STEM curricula content and the implementation strategies of STEM teaching. Finally, we explained how to effectively evaluate to monitor and improve the implementation of the STEM curriculum. In addition to the above mentioned, we then presented a case study of STEM courses constructed under the guidance of “think-based instruction theory” (TBIT) to help readers further understand the nature of the STEM curricula.

Background: Idiopathic pulmonary arterial hypertension (IPAH) is a life-threatening disease. Owing to its high fatality rate and narrow therapeutic options, identification of the pathogenic mechanisms of IPAH is becoming increasingly important.Methods: In our research, we utilized the robust rank aggregation (RRA) method to integrate four eligible pulmonary arterial hypertension (PAH) microarray datasets and identified the significant differentially expressed genes (DEGs) between IPAH and normal samples. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were performed to analyze their functions. The interaction network of protein–protein interaction (PPI) was constructed to explore the correlation between these DEGs. The functional modules and hub genes were further identified by the weighted gene coexpression network analysis (WGCNA). Moreover, a miRNA microarray dataset was involved and analyzed to filter differentially expressed miRNAs (DE-miRNAs). Potential target genes of screened DE-miRNAs were predicted and merged with DEGs to explore a miRNA–mRNA network in IPAH. Some hub genes were selected and validated by RT-PCR in lung tissues from the PAH animal model.Results: A total of 260 DEGs, consisting of 183 upregulated and 77 downregulated significant DEGs, were identified, and some of those genes were novel. Their molecular roles in the etiology of IPAH remained vague. The most crucial functional module involved in IPAH is mainly enriched in biological processes, including leukocyte migration, cell chemotaxis, and myeloid leukocyte migration. Construction and analysis of the PPI network showed that CXCL10, CXCL9, CCR1, CX3CR1, CX3CL1, CXCR2, CXCR1, PF4, CCL4L1, and ADORA3 were recognized as top 10 hub genes with high connectivity degrees. WGCNA further identified five main functional modules involved in the pathogenesis of IPAH. Twelve upregulated DE-miRNAs and nine downregulated DE-miRNAs were identified. Among them, four downregulated DEGs and eight upregulated DEGs were supposed to be negatively regulated by three upregulated DE-miRNAs and three downregulated DE-miRNAs, respectively.Conclusions: This study identifies some key and functional coexpression modules involved in IPAH, as well as a potential IPAH-related miRNA–mRNA regulated network. It provides deepening insights into the molecular mechanisms and provides vital clues in seeking novel therapeutic targets for IPAH.

At the beginning of 2020, to stop the spread of the coronavirus disease (COVID-19) to the campus, the Ministry of Education of China launched a policy “Suspension of classes without suspending schooling” for the spring semester of 2020. However, the drawbacks of online teaching (e.g., students’ inadequate autonomous learning, the lack of effective online instruction) forced us to modify teaching strategies during this special period, especially developing courses that are suitable for student learning at home and improving their key competencies. In order to solve these problems, this study introduces some theoretical exploration and practical work of curriculum design under the guidance of thinking-based instruction theory (TBIT) during the pandemic. We firstly introduce TBIT, and elaborate on the curriculum design under the TBIT theoretical frame. Then we describe a series of TBIT-based micro-courses with the pandemic as background. A descriptive study is reported to illustrate the effects of three micro-courses. Results showed that, compared to national curricula, the TBIT-based micro-courses not only improved the course quality but also enhanced students’ motivation and facilitated their online learning behavior (such as interactive communication) for the online courses. The current study has important implications for how to design effective and interesting online courses suitable under pandemic and capable of improving students’ thinking abilities and key competencies.

The COVID-19 epidemic is associated with negative mood, which has the potential to be a powerful driver of creativity. However, the influence of negative mood on cognitive creativity and emotional creativity remains elusive. Previous research has indicated that self-focused attention is likely to be related to both negative mood and creativity. The current study introduced two self-focused attention variables (i.e., rumination, reflection) to explore how negative mood might contribute to cognitive creativity and emotional creativity. Based on a sample of 351 participants, our study found that (1) negative mood during the outbreak of COVID-19 was associated with cognitive creativity and emotional creativity. Meanwhile, there were significant serial mediation effects of rumination and reflection in the relationship between negative mood and creativity and (2) the psychological impact after exposure to the COVID-19 epidemic was positively correlated with emotional creativity but not with cognitive creativity. These results suggested that individuals, in real life and work, could achieve better creative performance through moderate self-focus. Moreover, individuals with different mood states can be induced to enhance their creativity in times of crisis through intervention training to promote reflection.

Theabrownin (TB) is a heterogeneous biomacromolecule, extracted from tea, with many functional groups. Importantly, TB possesses diverse health benefits, such as antitumor activity and blood lipid-lowering effects. Presently, the content of TB in tea extract is relatively low. Here, we obtained a deep-processed black tea extract with a high content of TB (close to 80%), which was named Herbt Tea Essences (HTE). Currently, this study was designed to evaluate the biosafety of high-content TB products on mice. We implemented acute and subacute toxic experiments to assess its safety on organs, the serum biochemical and molecular levels. In the acute exposure study, we found that the median lethal dose (LD50) value of HTE was 21.68 g/kg (21.06–24.70 g/kg, greater than 5 g/kg), suggesting that HTE had a low acute toxicity. In the 28-day subacute exposure study, our results showed that no abnormal effects were observed in the 40 and 400 mg/kg/day HTE-treated groups. However, we observed slight nephrotoxicity in the 4000 mg/kg/day HTE-treated group. The HTE-induced nephrotoxic effect might involve the inflammatory response activation mediated by the nuclear transcription factor kappa-B (NF-κB) signaling pathway. This study would provide valuable data for the TB safety assessment and promote this natural biomacromolecule application in daily drinking.

Background: In December 2019, a novel communicable disease, novel coronavirus infected pneumonia (NCIP) caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) broke out. We aimed to analyze the characteristics and severity of patients with myocardial damage in NCIP. Methods: We enrolled 215 adult patients with NCIP from January 2020 to February 2020. Outcomes were followed up until March 1st, 2020. Results: 28.37% of the total patients showed increased level of TnI (>0.040 ng/ml). Patients were older and had more cardiovascular complications in increased TnI group. Higher CRP, NT-proBNP, lower immune CD3, CD4 and CD8 cell account and more involved lobes detected by CT scan in the lung were observed in increased TnI group. Patients with elevated TnI had higher CURB-65 scores and were more likely given glucocorticoid therapy and mechanical ventilation than patients in normal TnI group. Conclusions: Markers of cardiomyocyte injury were elevated not least in elderly males with pre-existing cardiovascular disease. Patients with elevated TnI presented more severe situation, leading to multiple organ dysfunctions, which appeared as a pivotal feature of patients with NCIP that requires attention by clinicians in order to provide necessary treatment as soon as possible and improve patients' outcomes.

Background: In December of 2019, coronavirus disease 2019 (Covid-19) was reported in Wuhan, China, and has now rapidly swept around the world. Much research has been carried out since the outbreak, but few studies have focused on the dysfunction of the adaptive immunity. Methods: In this retrospective and multi-center study, 373 patients with laboratory-confirmed COVID-19 from Shanghai Public Health Clinical Center and Affiliated Hospital of Putian University were recruited. Demographic, clinical, radiological features, and laboratory data were recorded and analyzed at admission and at discharge. Results of immunological tests were followed up until the patients were discharged. Results: Of the 373 patients with COVID-19 pneumonia, 322 were in the non-severe group and 51 were in the severe group. Number of T cells, CD4+ and CD8+ T cells, and total lymphocytes declined remarkably upon admission and elevated when the patients were discharged. At admission, counts of total lymphocytes, T cells, CD4+ and CD8+ T cells, and levels of C3 and C4 in the severe group were lower than those in the non-severe group, whereas the neutrophil to lymphocyte ratio (NLR) was higher in the severe group. Counts of T cells, CD4+ and CD8+ T cells, and total lymphocytes were negatively correlated with lactate dehydrogenase and C-reactive protein. Conclusion: COVID-19 might target adaptive immunity and cause a decrease in lymphocytes, especially T cells and subsets. Physicians should pay close attention to the adaptive immunity of patients upon admission. Monitoring NLR, T lymphocytes, and subsets would help physicians with the proper diagnosis and treatment of COVID-19. The reviews of this paper are available via the supplemental material section.

Present study aimed to immobilise the α-glucosidase on suitable supports to construct enzymatic microreactors and their subsequent applicability in efficient inhibitor screening from the Chinese Yam (Dioscorea opposita Thunb.) peel. A type of lamellar and porous composites (rGO@Fe3O4) were synthesised with a facile one-step solvothermal method and employed as carriers to construct enzymatic microreactors for screening α-glucosidase ligand from the Chinese Yam peel in league with the high performance liquid chromatography and mass spectrometry (HPLC-MS). The immobilisation amount of α-glucosidase on rGO@Fe3O4 under the optimised conditions was about 40 μg α-glucosidase/mg carriers. Furthermore, the binding capacities of screened inhibitors, 2,4-dimethoxy-6,7-dihydroxyphenanthrene and batatasin I, were 35.6 and 68.2%, respectively. Hence, considering their high screening efficiency and excellent magnetic separation ability, these as-prepared nanocomposite consisting of rGO and Fe3O4 may be potential supports for the enzyme (such as α-glucosidase) immobilisation for rapid α-glucosidase inhibitors screening from the diverse nature resources.

This study examined the cognitive mechanism underlying acute stress in creative cognition among individuals with high and low trait anxiety. Specifically, cognitive inhibition was assessed using the flanker task during acute stress. Fifty-two participants (26 with high trait anxiety, 26 with low trait anxiety, with a mean age of 18.94 years) underwent stress induction via the Trier Social Stress Test (TSST). They all completed the Alternative Uses Test (AUT) and the Remote Associates Test (RAT) before and after the TSST. Biochemical markers (salivary cortisol and salivary alpha amylase) were recorded at regular intervals. The results showed that cognitive inhibition was influenced by trait anxiety and acute stress. In low-trait anxious individuals after experiencing acute stress, there was a lack of cognitive inhibition and they performed better in AUT (fluency), compared to before experiencing acute stress, whereas high-trait anxious individuals showed a decreased interference effect and reduced performance in AUT (fluency, flexibility, and originality). In the RAT, there were shorter response times and increased accuracy after acute stress in both high- and low-trait anxiety groups. Thus, we suggest that cognitive control, which modulates changes in acute stress, influences creative cognition. These findings provide evidence that inhibition control mediates the effect of stress on the creativity of individuals with different trait anxiety.

Many studies have suggested that procrastination can result in negative effects, such as anxiety and decline in academic performance; however, procrastination can be either active or passive. This study explored the serial mediation effect of personal mastery and creative self- concept in the correlation between active procrastination and creative thinking. A sample of 536 participants was asked to complete a series of questionnaires. The results demonstrated that creative self-concept played a mediating role in the correlation between active procrastination and creative thinking. Moreover, personal mastery and creative self-concept serially mediated the association between active procrastination and creative thinking. This study identified the critical factors associated with creative thinking and provided a reference for educators' interventions for improving students' creativity.

Background: Although substantial evidence suggests that maternal work hours may have a negative effect on children’s cognitive development, the link between maternal work hours and children’s affect remains unclear. Some studies have observed that non-daytime maternal work hours are associated with more emotional problems among children. However, few studies have focused on the effects of maternal work hours on workdays and non-workdays. Therefore, this study separately investigated the relation between maternal work hours on workdays and on non-workdays and explored the mediating role of the frequency of mother-child communication (FMCC) and the moderating role of maternal education.Method: Using cluster sampling, this study selected 879 students in grades 4–6 at two primary schools in the Hebei and Shandong provinces in China and their mothers as the study subjects. A multi-group structural equation model (SEM) was used to test the relations between maternal work hours, FMCC and children’s affect and the moderating effect of maternal education.Results: (1) Non-college-educated mothers’ work hours on workdays negatively predicted FMCC, but there was no such effect for college-educated mothers; (2) non-workday work hours of all employed mothers negatively predicted FMCC; (3) the FMCC of all employed mothers positively predicted children’s positive affect; (4) the FMCC of college-educated mothers negatively predicted children’s negative affect although there was no such relation for non-college-educated mothers; (5) there was a significant mediating effect of FMCC on the relation between maternal work hours and children’s affect only for non-college-educated mothers; and (6) the workday work hours of non-college-educated mothers positively predicted children’s negative affect, but this correlation was negative for college-educated mothers.Conclusion: Maternal work hours have a marginally significant negative effect on children’s affect through FMCC only for non-college-educated mothers. Compared with non-college-educated mothers, college-educated mothers more easily compensate for the loss of communication opportunities caused by increased work hours on workdays, and children with college-educated mothers benefit more from this communication. However, compensating for the loss of communication opportunities caused by increased work hours on non-workdays is difficult for all employed mothers.

Prognosis of fatigue crack growth for mechanical and structural components is vital for aging military aircraft operated near or beyond their original design lives. For modern aircraft, prognostics and health management is supposed to be a designed-in capability; however, prognosis of mechanical and structural damage is yet to fully mature. This paper presents a scheme adopting Bayesian probabilistic modelling, extended Kalman filter (EKF) in particular, to predict fatigue crack growth in a common aircraft structural material: 2024-T3 aluminum alloy. In this scheme, the state model is the widely adopted Paris law in fracture mechanics (used to model the physics of crack growth), and the measurement model is a simple random walk model. The scheme is validated using a set of published crack growth test data, often referred to as the Virkler data, where the state model parameters are derived from one half of the data and the crack length prediction is made on the other half of the data. The EKF framework is further validated using a set of gear tooth crack propagation test data, where the crack length is the unobservable (or hidden) state variable, and the observable variable is a feature extracted from the gear vibration signal. The state model is also derived from the Paris law and the measurement model is developed using the observed relationship between the known crack length, the applied stress, and the energy of the impulsive signature extracted from an optimized sinusoidal model for gear vibration signals. Using the recursive EKF solution, we are able to achieve promising prognostic results in terms of the accuracy of the prediction, and demonstrate the method’s robustness in dealing with uncertainties in the parameters defining the Paris law and the uncertainties in the measurements. Compared to other studies, the proposed method is a much simpler and more robust approach to the prognosis of fatigue crack size in mechanical structures and rotating components.

Aquatic vegetation plays an important role in maintaining the balance of lake ecosystems. Thus, classifying and mapping aquatic vegetation is a priority for lake management. Classification tree (CT) approaches have been used successfully to map aquatic vegetation from spectral indices obtained from remotely sensed images. However, due to the effects of extrinsic and intrinsic factors, applying a CT model developed for imagery from one date to imagery from another date or a different dataset likely would reduce the classification accuracy. In this study, three spectral features (SFs) were selected to develop a CT model for identifying aquatic vegetation in Taihu Lake. Three traditional CT models with three SFs were developed using CT analysis based on satellite images acquired on 11 July, 16 August and 26 September 2013, and corresponding ground-truth samples, from the Huangjing-1A/B Charge-Coupled Device (HJ-CCD) images, environment and disaster reduction small satellites that were launched by China Center for Resources Satellite Data and Application (CRESDA). The overall accuracies of traditional CT models were 82%, 80% and 84%. We then tested two methods to modify CT model thresholds to adjust the traditional CT models based on image date to determine if the results would enable us to map and classify aquatic vegetation for periods when no ground-based data were available. We assessed the results with ground-truth samples and area agreement with traditional CT models. Results showed that CT models modified from a linear adjustment based on the relationship between ranked values of SFs between two image dates produced map accuracies comparable with those obtained from the traditional CT models and suggest that the method we proposed is feasible for mapping aquatic vegetation types in lakes when ground data are not available.

Systemic lupus erythematosus (SLE) is a chronic autoimmune disease characterized by aberrant T cell immune response. Diffuse proliferative lupus nephritis (LN-IV) is the most common, severe, and active form of lupus nephritis. In this study, we investigated the production of Th1, Th2, and Th17 cytokines in prediction of active form of LN-IV. ProcartaPlex multiplex immunoassays panels were used for detection of serum Th1, Th2, and Th17 cytokines profiling. Th1 and Th17 cytokines (IL-18, IFN-γ, IL-12p70, IL-6, and IL-17A) were considerably expressed in the serum of lupus nephritis IV patients in comparison to the healthy control. However, only IL18 and IL6 were higher in class IV versus class III lupus nephritis. Importantly, the ratios of Th1/Th2 (IL-18/IL-4) and Th17/Th2 (IL-17A/IL-4) were significantly elevated in LN-IV when compared with LN-III, LN-V, and healthy controls. Consistently, the serum cytokines IL-18, IL-17A, and IFN-γ were markedly expressed in LN-IV patient glomeruli and interstitial tissue compared to other classes of LN by IHC. ROC further suggests that IL-18 was a potential marker for LN-IV. The data from our study suggests that the early detection and quantification of these cytokines may help in prediction of active form of LN-IV.

Dentinogenesis is a necessary prerequisite for dental tissue engineering. One of the steps for dentinogenesis is to obtain large quantities of highly purified odontoblasts. Therefore, we have undertaken an experiment applying different concentrations of β-glycerophosphate (β-GP) to induce the differentiation of dental pulp stem cells (DPSCs) in a long-term 28-day culture. In the meanwhile, we have studied the time- and maturation-dependent expression of matrix extracellular phosphoglycoprotein (MEPE) and that of the odontoblast-like marker-dentin sialoprotein (DSP), in order to investigate an optimized mineralized condition. Western blot results revealed that the expression of DSP became lower when accompanied by the increase of the β-GP concentration, and there was also an influence on MEPE expression when different concentrations of β-GP were applied. Meanwhile, the mineralized groups had an inhibitory function on the expression of MEPE as compared with the control group. Above all, all experimental groups successfully generated mineralized nodules by Alizarin Red S and the 5 mM β-GP group formed more mineralized nodules quantitated using the CPC extraction method. In conclusion, there is a significant modulation of the β-GP during the differentiation of the DPSCs. The degree of odontoblast differentiation is β-glycerophosphate concentration dependent. A low concentration of β-GP (5 mM) has been shown to be the optimal concentration for stimulating the maturation of the DPSCs. Moreover, MEPE accompanied with DSP clearly demonstrates the degree of the differentiation.

This study aims to investigate the effects of various design parameters on the actuation performance of a pneumatic network actuator (PNA), optimise its structure using the finite element method (FEM), and subsequently quantify the performance of the resulting actuator topology experimentally. The effects of the structural parameters, including the operation pressure, the wall thickness and the gap between the chambers, bottom layer thickness, and the geometry of the channel cross section, on the deformation and bending angle of the actuator were evaluated to optimise the performance of the pneumatic actuator. A Global Analysis of Variance (ANOVA) was performed to investigate how the variables affect the mechanical output of the actuator and, thus, the significance of variables affecting the deformation (and bending angle) of the pneumatic actuator was identified. After the parameter optimisation, a pneumatic channel with a 4.5 mm bottom layer thickness, 1.5 mm wall thickness, and 1.5 mm gap between sequential chambers is recommended to perform optimised bending motion for the pneumatic network actuator. The optimised FE model results were verified experimentally. This design optimisation method based on the FEM and ANOVA analysis can be extended to the topology optimisation of other soft actuators.

Whether trait anxiety is associated with a general impairment of cognitive control is a matter of debate. This study investigated whether and how experimentally manipulated working memory (WM) load modulates the relation between trait anxiety and cognitive control. This question was investigated using a dual-task design in combination with event-related potentials. Participants were required to remember either one (low WM load) or six letters (high WM load) while performing a flanker task. Our results showed that a high WM load disrupted participants' ability to overcome distractor interference and this effect was exacerbated for the high trait-anxious (HTA) group. This exacerbation was reflected by larger interference effects (i.e., incongruent minus congruent) on reaction times (RTs) and N2 amplitudes for the HTA group than for the low trait-anxious group under high WM load. The two groups, however, did not differ in their ability to inhibit task-irrelevant distractors under low WM load, as indicated by both RTs and N2 amplitudes. These findings underscore the significance of WM-related cognitive demand in contributing to the presence (or absence) of a general cognitive control deficit in trait anxiety. Furthermore, our findings show that when limited WM resources are depleted by high WM load, HTA individuals exhibit less efficient recruitments of cognitive control required for the inhibition of distractors, therefore resulting in a greater degree of response conflict.

Aberrant histone acetylation plays an essential role in the neoplastic process via the epigenetic silencing of tumour suppressor genes (TSGs); therefore, the inhibition of histone deacetylases (HDAC) has become a promising target in cancer therapeutics. To investigate the correlation of histone acetylation with clinicopathological features and TSG expression, we examined the expression of acetylated H3 (AcH3), RARβ2, E-cadherin, and β-catenin by immunohistochemistry in 65 cervical squamous cell carcinoma patients. The results revealed that the absence of AcH3 was directly associated with poor histological differentiation and nodal metastasis as well as reduced/negative expression of RARβ2, E-cadherin, and β-catenin in clinical tumour samples. We further demonstrated that the clinically available HDAC inhibitors valproic acid (VPA) and suberoylanilide hydroxamic acid (SAHA), in combination with all-trans retinoic acid (ATRA), can overcome the epigenetic barriers to transcription of RARβ2 in human cervical cancer cells. Chromatin immunoprecipitation analysis showed that the combination treatment increased the enrichment of acetylated histone in the RARβ2-RARE promoter region. In view of these findings, we evaluated the antitumor effects induced by combined VPA and ATRA treatment in a xenograft model implanted with poorly differentiated human squamous cell carcinoma. Notably, VPA restored RARβ2 expression via epigenetic modulation. Additive antitumour effects were produced in tumour xenografts by combining VPA with ATRA treatment. Mechanistically, the combination treatment reactivated the expression of TSGs RARβ2, E-cadherin, P21 (CIP1) , and P53 and reduced the level of p-Stat3. Sequentially, upregulation of involucrin and loricrin, which indicate terminal differentiation, strongly contributed to tumour growth inhibition along with partial apoptosis. In conclusion, targeted therapy with HDAC inhibitors and RARβ2 agonists may represent a novel therapeutic approach for patients with cervical squamous cell carcinoma.

The effectiveness of near-infrared imaging (NIR) interrogation of epidermal growth factor receptor (EGFR) expression as a sensitive biomarker of oral squamous cell carcinoma (OSCC) response to arsenic trioxide therapy was studied in mice.A431 OSCC in vitro were exposed to 0 µM, 0.5 µM, 2.5 µM, or 5 µM of As(2)O(3) for 0 h, 24 h, 48 h and 72 h. Confocal microscopy and flow cytometry confirmed EGFR expression and demonstrated a sensitivity dose-related signal decline with As(2)O(3) treatment. Next, mice with pharynx-implanted A431 cells received As(2)O(3) i.p. every 48 h at 0.0, 0.5, 2.5, or 5 mg/kg/day (n = 6/group) from day 0 to 10. An intravenous NIR probe, EGF-Cy5.5, was injected at baseline and on days 4, 8, and 12 for dynamic NIR imaging. Tumor volume and body weights were measured three times weekly.In vitro, A431 EGFR expression was well appreciated in the controls and decreased (p

This study aimed to understand the effect of task motivation on online group creative performance and interpersonal interaction. A total of 150 university students were recruited to collaborate online on creativity tasks in dyads. The members' task motivation was manipulated, resulting in three groups that differed in their motivation composition. Ratings of creative performance (fluency and originality), hemodynamic inter-brain synchronization, and lag sequential analysis were compared among the three groups. The results showed that groups comprising two highly motivated members conducted an efficient communication mode and achieved the best creative performance. Contrastingly, groups composed of one high- and one low-motivation member demonstrated the closest interpersonal interaction among members. The findings of this study suggest that it is essential to ensure that every member is highly motivated to improve creative performance in online groups. However, this may result in reduced interpersonal interaction.

In order to analyse whether or not the characteristic of scientific inquiry activities of textbooks in China satisfy the requirements of China's new curriculum reforms, content analysis method was adopted to analyze scientific inquiry activities in junior middle school physical textbooks (grade 8) of five editions authorized by the Chinese Ministry of Education. The results show that the inquiry activities in the five versions of textbooks in China cannot meet the requirements of authentic scientific inquiry regardless of the degree of openness or operationality of cognitive processes and are not conducive to develop students' scientific inquiry skills and scientific reasoning skills. The authors of science textbooks should take note of the latest insights from the world of academia and develop some new authentic scientific inquiry tasks to update textbooks in a prompt manner in order to improve the students' abilities of scientific inquiry. For the textbook reviewers, the present research not only provides them with specific findings, but also provides them with a method to evaluate textbooks.

Abstract Background Stephania kwangsiensis Lo (Menispermaceae) is a well-known Chinese herbal medicine, and its bulbous stems are used medicinally. The storage stem of S. kwangsiensis originated from the hypocotyls. To date, there are no reports on the growth and development of S. kwangsiensis storage stems. Results The bulbous stem of S. kwangsiensis, the starch diameter was larger at the stable expanding stage (S3T) than at the unexpanded stage (S1T) or the rapidly expanding stage (S2T) at the three different time points. We used ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) and Illumina sequencing to identify key genes involved in bulbous stem development. A large number of differentially accumulated metabolites (DAMs) and differentially expressed genes (DEGs) were identified. Based on the differential expression profiles of the metabolites, alkaloids, lipids, and phenolic acids were the top three differentially expressed classes. Compared with S2T, significant changes in plant signal transduction and isoquinoline alkaloid biosynthesis pathways occurred at both the transcriptional and metabolic levels in S1T. In S2T compared with S3T, several metabolites involved in tyrosine metabolism were decreased. Temporal analysis of S1T to S3T indicated the downregulation of phenylpropanoid biosynthesis, including lignin biosynthesis. The annotation of key pathways showed an up-down trend for genes and metabolites involved in isoquinoline alkaloid biosynthesis, whereas phenylpropanoid biosynthesis was not completely consistent. Conclusions Downregulation of the phenylpropanoid biosynthesis pathway may be the result of carbon flow into alkaloid synthesis and storage of lipids and starch during the development of S. kwangsiensis bulbous stems. A decrease in the number of metabolites involved in tyrosine metabolism may also lead to a decrease in the upstream substrates of phenylpropane biosynthesis. Downregulation of lignin synthesis during phenylpropanoid biosynthesis may loosen restrictions on bulbous stem expansion. This study provides the first comprehensive analysis of the metabolome and transcriptome profiles of S. kwangsiensis bulbous stems. These data provide guidance for the cultivation, breeding, and harvesting of S. kwangsiensis.

ABSTRACT: The H4 subtype of avian influenza virus (AIV) exhibits a wide host range and is commonly found in migratory waterfowl. Recent studies have revealed that the H4N6 AIV can infect guinea pigs via aerosol transmission without prior adaptation. Additionally, the Q226L/G228S substitutions in the receptor-binding site have led to structural changes in globular head of H4 AIV, resulting in a configuration similar to that of pandemic H2N2 and H3N2 human influenza viruses. This article provides an updated review of the historical evolution, global distribution, adaptive mutations, receptor-binding preferences, and host range of H4 AIV. The insights presented herein will help in assessing the potential risk of future H4 AIV epidemics.

In this study, in order to reveal the influence mechanism of bearing parameters on pneumatic hammering, an aerostatic bearing with a multi-orifice-type restrictor is analyzed. Firstly, the flow field is investigated, and the vortex-induced excitation is discussed in both the frequency and time domains. Then, the frequency-related displacement impedance is analyzed, and the effects of vortex-induced excitation on pneumatic hammering are discussed. Experiments are also conducted for verification. Moreover, the influence of damping on pneumatic hammering is identified. The results show that with larger damping, the risk of pneumatic hammering can be reduced. Finally, the impacts of design parameters on the damping are discussed in detail using an approximate model. Design optimization is considered to achieve the maximum damping, i.e., the minimum risk of pneumatic hammering. The results show that both the air supply pressure and the pocket volume should be minimized. The analysis process provides a reference for the design of bearings to reduce pneumatic hammering.

The synthesis of 2D MoWS2 nanosheets involved the liquid-phase exfoliation technique was explored in this paper. The nonlinear optical response of MoWS2 was characterized in the 1 µm wavelength range, and its suitability as a saturable absorber (SA) was confirmed. Experimental demonstrations were conducted by using MoWS2 as an SA in an idler-resonant intracavity KTA optical parametric oscillator (OPO) driven by a dual-loss-modulated Q-switched and mode-locked (QML) YVO4/Nd:YVO4 laser with an acousto-optic modulator (AOM). By appropriately tuning the pump power and the AOM repetition rate, the Q-switched envelope pulse widths for the signal and idler waves could be significantly reduced to be shorter than the cavity round-trip transit time, i.e., the interval between two neighboring mode-locking pulses. Consequently, this enabled the generation of sub-nanosecond single mode-locking pulses with a low repetition rate, high pulse energy, and remarkable stability. With a repetition rate of 1 kHz and maximal pulse energies of 318 µJ and 169 µJ, respectively, sub-nanosecond single mode-locking pulses of the signal and idler waves were generated. The theoretical model was established using coupled rate equations with a Gaussian spatial distribution approximation. The numerical simulation results for generating sub-nanosecond single mode-locking pulses for the signal and idler waves within their respective Q-switched envelopes aligned fundamentally with the experimental results, proving that MoWS2 can be a potential nanomaterial for further optoelectronic applications.