Search

Comprehensive experimental quantification and mapping of the aggregation and dispersion state of engineered nanoparticles (NPs) in the presence of humic substances is a great challenge. Dissipative particle dynamic (DPD) simulation was adopted to investigate the aggregation and dispersion mechanisms of NPs in the presence of a humic substance analog. Twelve different types of NPs including 2 metal-based NPs, 7 metal oxide-based NPs, and 3 carbon-based NPs in pure water (pH 3.0) and algae medium (pH 8.0) in the presence of a humic substance analogy were selected for experimental verification of the DPD simulation results. In agreement with results obtained with dynamic light scattering and phase analysis light scattering techniques, the simulations demonstrated that the presence of humic substances reduced the aggregation extent of the NPs. The DPD simulations showed that the stability and dispersity of the NPs increased first, and then decreased with increasing concentrations of humic substances. Moreover, there existed a concentration of humic substances where the NPs became more stable and more dispersed, which was experimentally verified in the case of all the NPs in the pure water and in the algae medium. Furthermore, theory and simulation indicate that both hydrophobic and hydrogen interaction play an important role in controlling the formation of NP aggregates in the presence of humic substances. Electrostatic interaction and steric repulsion are the main mechanisms underlying the effects of humic substances on the aqueous dispersion stability of NPs. Environ Toxicol Chem 2018;37:1024-1031. © 2017 SETAC., (© 2017 SETAC.)

Metal-based engineered nanomaterials (ENMs) are known to affect bacterial processes and metabolic activities. While testing their negative effects on biological components, studies traditionally rely on initial exposure concentrations and thereby do not take into consideration the dynamic behavior of ENMs that ultimately determines exposure and toxicity (e.g. ion release). Moreover, functional responses of soil microbial communities to ENMs exposure can be caused by both the particulate forms and the ionic forms, yet their relative contributions remain poorly understood. Therefore, we investigated the dynamic changes of exposure concentrations of three different types of ENMs (nano-ZnO, -Cu and -Pb) and submicron particles (SMPs) in relation to their impact on the capacity of soil bacterial communities to utilize carbon substrates. The different ENMs were chosen to differ in dissolution potential. The dynamic exposures of ENMs were considered using a time weighted average (TWA) approach. The joint toxicity of the particulate forms and the ionic forms of ENMs was evaluated using a response addition model. Our results showed that the effect concentrations of spherical nano-ZnO, -Cu and SMPs, and Pb-based perovskites expressed as TWA were lower than expressed as initial concentrations. Both particulate forms and ionic forms of spherical 18nm, 43nm nano-ZnO and 50nm, 100nm nano-Cu contribute to the overall response at the EC 50 levels. The particulate forms for 150nm, 200nm and 900nm ZnO SMPs and rod-shaped 78nm nano-Cu mainly affected the soil microbial metabolic potential, while the Cu ions released from spherical 25nm nano-Cu, 500nm Cu SMPs and Pb ions released from perovskites mainly described the effects to bacterial communities. Our results indicate that the dynamic exposure of ENMs and relative contributions of particles and ions require consideration in order to pursue a naturally realistic assessment of environmental risks of metal-based ENMs., (Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.)

The present study investigated how humic substances (HS) modify the aquatic toxicity of silver nanoparticles (AgNPs) as these particles agglomerate in water and interact with HS. An alga species (Raphidocelis subcapitata), a cladoceran species (Chydorus sphaericus), and a freshwater fish larva (Danio rerio), representing organisms of different trophic levels, were exposed to colloids of the polyvinylpyrrolidone-coated AgNPs in the presence and absence of HS. Results show that the presence of HS alleviated the aquatic toxicity of the AgNP colloids to all the organisms in a dose-dependent manner. The particle size distribution of the AgNPs' colloidal particles shifted to lower values due to the presence of HS, implying that the decrease in the toxicity of the AgNP colloids cannot be explained by the variation of agglomeration size. The surface charge of the AgNPs was found to be more negative in the presence of high concentrations of HS, suggesting an electrostatic barrier by which HS might limit interactions between particles and algae cells; indeed, this effect reduced the algae toxicity. Observations on silver ions (Ag(+)) release show that HS inhibit AgNP dissolution, depending on the concentrations of HS. When toxic effects were expressed as a function of each Ag-species, toxicity of the free Ag(+) was found to be much higher than that of the agglomerated particles., (© 2015 SETAC.)

Estimating the environmental exposure to manufactured nanomaterials is part of risk assessment. Because nanoparticles aggregate with each other (homoaggregation) and with other particles (heteroaggregation), the main route of the removal of most nanoparticles from water is aggregation, followed by sedimentation. The authors used water samples from two rivers in Europe, the Rhine and the Meuse. To distinguish between small (mainly natural organic matter [NOM]) particles and the remainder of the natural colloids present, both filtered and unfiltered river water was used to prepare the particle suspensions. The results show that the removal of nanoparticles from natural river water follows first-order kinetics toward a residual concentration. This was measured in river water with less than 1 mg L(-1) CeO(2) nanoparticles. The authors inferred that the heteroaggregation with or deposition onto the solid fraction of natural colloids was the main mechanism causing sedimentation in relation to homoaggregation. In contrast, the NOM fraction in filtered river water stabilized the residual nanoparticles against further sedimentation for up to 12 d. In 10 mg L(-1) and 100 mg L(-1) CeO(2) nanoparticle suspensions, homoaggregation is likely the main mechanism leading to sedimentation. The proposed model could form the basis for improved exposure assessment for nanomaterials., (Copyright © 2012 SETAC.)

Recently, polyfluorinated and perfluorinated compounds (PFCs) have been detected in most surface waters around the world. Because some PFCs are persistent and tend to accumulate in surface waters, their potential adverse effects to aquatic organisms have received increasing attention. Nevertheless, currently available toxicity information is limited. The aim of this study was to evaluate the toxicity effects of seven PFCs on root elongation of lettuce (Lactuca sativa) and photosynthesis of green algae (Pseudokirchneriella subcapitata). It was found that the toxicity profiles of both species tested were similar and had good relations with the fluorinated carbon-chain length of the PFCs investigated. One of the compounds tested, perfluorobutanoic acid, was found to be more toxic than expected in the algae test, which may be related with acidification of the test solution. It was concluded that because short-chained PFCs are becoming the predominant PFC pollutants in surface waters, their long-term toxicity and mixture toxicity with other PFCs should be studied in greater detail.

The aim of the experiment was to determine if temporal variations of belowground activity reflect the influence of the Cry1Ab protein from transgenic maize on soil bacteria and, hence, on a regulatory change of the microbial community (ability to metabolize sources belonging to different chemical guilds) and/or a change in numerical abundance of their cells. Litter placement is known for its strong influence on the soil decomposer communities. The effects of the addition of crop residues on respiration and catabolic activities of the bacterial community were examined in microcosm experiments. Four cultivars of Zea mays L. of two different isolines (each one including the conventional crop and its Bacillus thuringiensis cultivar) and one control of bulk soil were included in the experimental design. The growth models suggest a dichotomy between soils amended with either conventional or transgenic maize residues. The Cry1Ab protein appeared to influence the composition of the microbial community. The highly enhanced soil respiration observed during the first 72 h after the addition of Bt-maize residues can be interpreted as being related to the presence of the transgenic crop residues. This result was confirmed by agar plate counting, as the averages of the colony-forming units of soils in conventional treatments were about one-third of those treated with transgenic straw. Furthermore, the addition of Bt-maize appeared to induce increased microbial consumption of carbohydrates in BIOLOG EcoPlates. Three weeks after the addition of maize residues to the soils, no differences between the consumption rate of specific chemical guilds by bacteria in soils amended with transgenic maize and bacteria in soils amended with conventional maize were detectable. Reaped crop residues, comparable to post-harvest maize straw (a common practice in current agriculture), rapidly influence the soil bacterial cells at a functional level. Overall, these data support the existence of short Bt-induced ecological shifts in the microbial communities of croplands' soils.

When chemical analysis indicates metal pollution, a second-tier method is needed to evaluate whether toxic effects occur at the polluted sites. A method based on pollution-induced community tolerance (PICT) was developed using samples taken from locations polluted with sewage more than 20 years ago. Microorganisms extracted from soil samples were exposed to a concentration range of zinc, nickel, copper, chromium (III), or chromium (VI) salts in a buffer suspension. The remaining activity of the intoxicated microorganisms was determined by color formation with 31 different organic substrates in microtiter plates. Microorganisms from moderately Zn-polluted sites (>45 mg/kg) showed an increased tolerance for zinc. Nickel tolerance was observed at 51 mg Ni/kg soil, chromium (VI) tolerance at 923 mg Cr/kg. In most cases, tolerance also was observed at higher concentrations. High concentrations of 1,494 mg Cu/kg or 3,935 mg Cr/kg did not show PICT, indicating a limited bioavailability of Cu and Cr at these sites. The benefits of our method are its greater sensitivity compared to other tests used at these sites, and its specificity for those metals that exceed allowable levels.