Search

The atomization process of swirling sprays in gas turbine engines has been investigated using a LES-VOF model. With fine grid resolution, the ligament and droplet formation processes are captured in detail. The spray structure of fully developed sprays and the flow field are observed firstly. A central recirculation zone is generated inside the hollow cone section due to the entrainment of air by the liquid sheet and strong turbulent structures promote the breakup of ligaments. At the exit of injector nozzle, surface instability occurs due to disturbance factors. Axial and transverse mode instabilities produce a net-like structure ligament zone. Finally, the generation mechanism of the droplet is analyzed. It is found that the breakup mechanism of ligaments is located at the Raleigh capillary region. Axial symmetry oscillation occurs due to the surface tension force and the capillary waves pinch off from the neck of the ligaments. Secondary breakup and coalescence occur at the “droplet zone,” resulting in a wider distribution curve at the downstream area. [ABSTRACT FROM AUTHOR]

The macro characteristics and configurations of induced shock waves of the supersonic sprays are investigated by experimental methods. Visualization study of spray shape is carried out with the high-speed camera. The macro characteristics including spray tip penetration, velocity of spray tip and spray angle are analyzed. The configurations of shock waves are investigated by Schlieren technique. For supersonic sprays, the concept of spray front angle is presented. Effects of Mach number of spray on the spray front angle are investigated. The results show that the shape of spray tip is similar to blunt body when fuel spray is at transonic region. If spray entered the supersonic region, the oblique shock waves are induced instead of normal shock wave. With the velocity of spray increasing, the spray front angle and shock wave angle are increased. The tip region of the supersonic fuel spray is commonly formed a cone. Mean droplet diameter of fuel spray is measured using Malvern's Spraytec. Then the mean droplet diameter results are compared with three popular empirical models (Hiroyasu's, Varde's and Merrigton's model). It is found that the Merrigton's model shows a relative good correlation between models and experimental results. Finally, exponent of injection velocity in the Merrigton's model is fitted with experimental results. [ABSTRACT FROM AUTHOR]