Search

A comparative experimental and numerical study of the impact behaviour of carbon-fiber-reinforced thermoplastic (TP) and thermoset (TS) composites has been carried out. On the one hand, low velocity impact (LVI) tests were performed on TP and TS composites with different lay-up sequences at different energy levels, and the damage modes and microscopic damage mechanisms after impact were investigated using macroscale inspection, C-scan inspection, and X-ray-computed tomography. The comparative results show that the initial damage valve force under LVI depends not only on the material, but also on the layup sequence. The initial valve force of the P2 soft layer with lower stiffness is about 11% lower than that of the P1 quasi-isotropic layer under the same material, while the initial valve force of thermoplastic composites is about 28% lower than that of thermoset composites under the same stacking order. Under the same stacking order and impact energy level, the damage area and depth of TP composites are smaller than those of TS composites; while under the same material and impact energy level, the indentation depth of P2 plies is greater than that of P1 plies, and the damage area of P2 plies is smaller than that of P1 plies, but the change of thermoplastic composites is not as obvious as that of thermoset composites. This indicates that TP composites have a higher initial damage threshold energy and impact resistance at the same lay-up order, while increasing the lay-up ratio of the same material by 45° improves the impact resistance of the structure. In addition, a damage model based on continuum damage mechanics (CDM) was developed to predict different damage modes of thermoplastic composites during low velocity impact, and the analytical results were compared with the experimental results. At an impact energy of 4.45 J/mm, the error of the initial damage valve force is 5.26% and the error of the maximum impact force is 4.36%. The simulated impact energy and impact velocity curves agree with the experimental results, indicating that the finite element model has good reliability. [ABSTRACT FROM AUTHOR]

Symbiotic nitrogen fixation (SNF) is a crucial process for nitrogen geochemical cycling and plant‐microbe interactions. Water‐soluble humic acid (WSHM), an active component of soil humus, has been shown to promote SNF in the legume‐rhizobial symbiosis, but its molecular mechanism remains largely unknown. To reveal the SNF‐promoting mechanism, we conducted transcriptomic analysis on soybean treated with WSHM. Our findings revealed that up‐ and downregulated differentially expressed genes (DEGs) were mainly involved in plant cell‐wall/membrane formation and plant defence/immunity in the early stage, while the late stage was marked by the flavonoid synthesis and ethylene biosynthetic process. Further study on representative DEGs showed that WSHM could inhibit GmBAK1d‐mediated immunity and BR signalling, thereby promoting rhizobial colonisation, infection, and nodulation, while not favoring pathogenic bacteria colonisation on the host plant. Additionally, we also found that the ethylene pathway is necessary for promoting the soybean nodulation by WSHM. This study not only provides a significant advance in our understanding of the molecular mechanism of WSHM in promoting SNF, but also provides evidence of the beneficial interactions among the biostimulator, host plant, and soil microbes, which have not been previously reported. Summary Statement: Water‐soluble humic acid promoted soybean‐rhizobia symbiosis and nodulation by inhibiting host immunity and ethylene pathway, without sacrificing defence to the pathogenic bacteria. [ABSTRACT FROM AUTHOR]

RNA‐binding proteins (RBPs) are components of the post‐transcriptional regulatory system, but their regulatory effects on complex traits remain unknown. Using an integrated strategy involving map‐based cloning, functional characterizations, and transcriptomic and population genomic analyses, we revealed that RBP‐K (LOC_Os08g23120), RBP‐A (LOC_Os11g41890), and RBP‐J (LOC_Os10g33230) encode proteins that form an RBP‐A‐J‐K complex that negatively regulates rice yield‐related traits. Examinations of the RBP‐A‐J‐K complex indicated RBP‐K functions as a relatively non‐specific RBP chaperone that enables RBP‐A and RBP‐J to function normally. Additionally, RBP‐J most likely affects GA pathways, resulting in considerable increases in grain and panicle lengths, but decreases in grain width and thickness. In contrast, RBP‐A negatively regulates the expression of genes most likely involved in auxin‐regulated pathways controlling cell wall elongation and carbohydrate transport, with substantial effects on the rice grain filling process as well as grain length and weight. Evolutionarily, RBP‐K is relatively ancient and highly conserved, whereas RBP‐J and RBP‐A are more diverse. Thus, the RBP‐A‐J‐K complex may represent a typical functional model for many RBPs and protein complexes that function at transcriptional and post‐transcriptional levels in plants and animals for increased functional consistency, efficiency, and versatility, as well as increased evolutionary potential. Our results clearly demonstrate the importance of RBP‐mediated post‐transcriptional regulation for the diversity of complex traits. Furthermore, rice grain yield and quality may be enhanced by introducing various complete or partial loss‐of‐function mutations to specific RBP genes using clustered regularly interspaced palindromic repeats (CRISPR)/CRISPR‐associated protein 9 technology and by exploiting desirable natural tri‐genic allelic combinations at the loci encoding the components of the RBP‐A‐J‐K complex through marker‐assisted selection. [ABSTRACT FROM AUTHOR]

The unmodified and nano-SiO2 modified glass fiber reinforced polymer (GFRP) composites were prepared by the hot-compression molding process to investigate the effects of nano-SiO2 on the mechanical and hygric properties of the GFRP composites. The results indicate that the nano-SiO2 modification results in an increase of 9.7% and 7.9% in the tensile and flexural strength of the GFRP composites, and a decrease of 10.6% in the interlaminar shear strength (ILSS). The maximum swelling of the unmodified GFRP is 2.6 times as that of the nano-SiO2 modified GFRP. The normalized-ILSS decrease of the nano-SiO2 modified GFRP is only 12% after 138 days aging, while that of the GFRP reaches 31%. After 95-days hygric-aging, the decrease of the normalized flexural strength is 15.3% for the GFRP, while the normalized flexural strength of the nano-SiO2 modified GFRP still maintains an increase of 5.0%. It is concluded that the nano-SiO2 particle could improve the mechanical and hygric properties of the GFRP composites.

Amylose content (AC) is the main factor determining the palatability, viscosity, transparency, and digestibility of rice (Oryza sativa) grains. AC in rice grains is mainly controlled by different alleles of the Waxy (Wx) gene. The AP2/EREBP transcription factor OsEBP89 interacts with the MYC‐like protein OsBP5 to synergistically regulate the expression of Wx. Here, we determined that the GLYCOGEN SYNTHASE KINASE 5 (OsGSK5, also named SHAGGY‐like kinase 41 [OsSK41]) inhibits the transcriptional activation activity of OsEBP89 in rice grains during amylose biosynthesis. The loss of OsSK41 function enhanced Wx expression and increased AC in rice grains. By contrast, the loss of function of OsEBP89 reduced Wx expression and decreased AC in rice grains. OsSK41 interacts with OsEBP89 and phosphorylates four of its sites (Thr‐28, Thr‐30, Ser‐238, and Thr‐257), which makes OsEBP89 unstable and attenuates its interaction with OsBP5. Wx promoter activity was relatively weak when regulated by the phosphomimic variant OsEBP89E–OsBP5 but relatively strong when regulated by the nonphosphorylatable variant OsEBP89A–OsBP5. Therefore, OsSK41‐mediated phosphorylation of OsEBP89 represents an additional layer of complexity in the regulation of amylose biosynthesis during rice grain development. In addition, our findings provide four possible sites for regulating rice grain AC via precise gene editing. [ABSTRACT FROM AUTHOR]

Auxin is an important phytohormone in plants, and auxin signaling pathways in rice play key roles in regulating its growth, development, and productivity. To investigate how rice grain yield traits are regulated by auxin signaling pathways and to facilitate their application in rice improvement, we validated the functional relationships among regulatory genes such as OsIAA10, OsSK41, and OsARF21 that are involved in one of the auxin (OsIAA10) signaling pathways. We assessed the phenotypic effects of these genes on several grain yield traits across two environments using knockout and/or overexpression transgenic lines. Based on the results, we constructed a model that showed how grain yield traits were regulated by OsIAA10 and OsTIR1, OsAFB2, and OsSK41 and OsmiR393 in the OsSK41‐OsIAA10‐OsARF module and by OsARF21 in the transcriptional regulation of downstream auxin response genes in the OsSK41‐OsIAA10‐OsARF module. The population genomic analyses revealed rich genetic diversity and the presence of major functional alleles at most of these loci in rice populations. The strong differentiation of many major alleles between Xian/indica and Geng/japonica subspecies and/or among modern varieties and landraces suggested that they contributed to improved productivity during evolution and breeding. We identified several important aspects associated with the genetic and molecular bases of rice grain and yield traits that were regulated by auxin signaling pathways. We also suggested rice auxin response factor (OsARF) activators as candidate target genes for improving specific target traits by overexpression and/or editing subspecies‐specific alleles and by searching and pyramiding the 'best' gene allelic combinations at multiple regulatory genes in auxin signaling pathways in rice breeding programs. [ABSTRACT FROM AUTHOR]

Xylanolytic enzymes, with both endo‐xylanase and arabinoxylan arabinofuranohydrolase (AXH) activities, are attractive for the economically feasible conversion of recalcitrant arabinoxylan. However, their characterization and utilization of these enzymes in biotechnological applications have been limited. Here, we characterize a novel bifunctional enzyme, rAbf43A, cloned from a bacterial consortium that exhibits AXH and endo‐xylanase activities. Hydrolytic pattern analyses revealed that the AXH activity belongs to AXHd3 because it attacked only the C(O)‐3‐linked arabinofuranosyl residues of double‐substituted xylopyranosyl units of arabinoxylan and arabinoxylan‐derived oligosaccharides, which are usually resistant to hydrolysis. The enzyme rAbf43A also liberated a series of xylo‐oligosaccharides (XOSs) from beechwood xylan, xylohexaose and xylopentaose, indicating that rAbf43A exhibited endo‐xylanase activity. Homology modelling based on AlphaFold2 and site‐directed mutagenesis identified three non‐catalytic residues (H161, A270 and L505) located in the substrate‐binding pocket essential for its dual‐functionality, while the mutation of A117 located in the −1 subsite to the proline residue only affected its endo‐xylanase activity. Additionally, rAbf43A showed significant synergistic action with the bifunctional xylanase/feruloyl esterase rXyn10A/Fae1A from the same bacterial consortium on insoluble wheat arabinoxylan and de‐starched wheat bran degradation. When rXyn10A/Fae1A was added to the rAbf43A pre‐hydrolyzed reactions, the amount of released reducing sugars, xylose and ferulic acid increased by 9.43% and 25.16%, 189.37% and 93.54%, 31.39% and 32.30%, respectively, in comparison with the sum of hydrolysis products released by each enzyme alone. The unique characteristics of rAbf43A position it as a promising candidate not only for designing high‐performance enzyme cocktails but also for investigating the structure–function relationship of GH43 multifunctional enzymes. [ABSTRACT FROM AUTHOR]

The economical production of 5‐aminolevulinic acid (ALA) has recently received increasing attention for its extensive use in agriculture. In this study, a strain of Bacillus cereus PT1 could initially produce ALA at a titre of 251.72 mg/L by using a hydrolysate mixture of low‐cost cassava residue and fish waste. The integration of endogenous hemA encoding glutamyl‐tRNA reductase led to a 39.30% increase in ALA production. Moreover, improving cell permeability by deletion of the LytR‐CpsA‐Psr (LCP) family gene tagU led to a further increase of 59.73% in ALA production. Finally, the engineered strain B. cereus PT1‐hemA‐ΔtagU produced 2.62 g/L of ALA from the previously mentioned hydrolysate mixture in a 7‐L bioreactor. In a pot experiment, foliar spray of the ALA produced by B. cereus PT1‐hemA‐ΔtagU from the hydrolysates increased salt tolerance of cucumber by improving chlorophyll content and catalase activity, while decreasing malondialdehyde content. Overall, this study demonstrated an economic way to produce ALA using a microbial platform and evidenced the potential of ALA in agricultural application. [ABSTRACT FROM AUTHOR]

Polyvinyl chloride (PVC) foam sandwich panels have a wide application prospect in the field of warship impact protection due to the low moisture absorption, low density, excellent energy consumption and chemical resistance of PVC foam. The dynamic response of layered density-graded PVC foam sandwich panel under impact load was experimentally and numerically investigated here. A three-layer PVC foam sandwich specimen was designed and fabricated. The graded strategy of foam core was achieved by setting various foam layers with different densities. A large-diameter split-Hopkinson pressure bar device was used to perform the experimental study. The effect of density-graded strategy of foam core on the transmitted force, transmitted impulse and energy absorption were discussed. The software ANSYS/LS-DYNA was used to simulate the dynamic impact test of the foam sandwich structure. The simulation results are in good agreement with the experimental results. The results reveal that, the order of the core layer of density-graded sandwich panel has little effect on the impact resistance of the structure, while the impact resistance can be improved by increasing the density difference between foam layers. The uniform configuration UD has the largest impact force and the most specific energy absorption, while the large gradient configuration large gradient configuration has the smallest transmitted impulse under various impact velocities of the projectile. Thus, large gradient configuration has better protection effect. [ABSTRACT FROM AUTHOR]