Search

Harvesting energy from flow using vortex-induced vibration (VIV) piezoelectric transducers has gained significant attention in recent decades due to their advantages, such as simple structure, blade-less layout, and low maintenance costs. However, most existing studies have focused on designing and analyzing a single piezoelectric energy harvester (PEH), without investigating the fluid-structure interaction and coupling of multiple PEH arrays. Here, we conducted an experimental study using a 2 × 2 PEH array to investigate its dynamic response under different wind speeds and spacings. Results show that the output voltage of the PEH array increases as the vertical spacing decreases, and the maximum average output voltage of 20.6 V per PEH is obtained when the minimum vertical spacing, maximum horizontal spacing, and resonance wind speed conditions are met. Compared to a single PEH, the 2 × 2 array arrangement increases the average output voltage by up to 168%. Additionally, the average output power under the resistance of 1 MΩ increases by 629% to 4.3×10−4 W per PEH, and the maximum output power increases by 792% to 5.3×10−4. Experiments indicate that the vortex shedding coupling can induce higher vibration in a well-defined array, which paves a new way for developing bladeless wind farms. [ABSTRACT FROM AUTHOR]

Nature abounds with examples of superior mobility through the fusion of aerial and ground movement. Drawing inspiration from such multimodal locomotion, we introduce a high-performance hybrid hopping and flying robot. The proposed robot seamlessly integrates a nano quadcopter with a passive telescopic leg, overcoming limitations of previous jumping mechanisms that rely on stance phase leg actuation. Based on the identified dynamics, a thrust-based control method and detachable active aerodynamic surfaces were devised for the robot to perform continuous jumps with and without position feedback. This unique design and actuation strategy enable tuning of jump height and reduced stance phase duration, leading to agile hopping locomotion. The robot recorded an average vertical hopping speed of 2.38 meters per second at a jump height of 1.63 meters. By harnessing multimodal locomotion, the robot is capable of intermittent midflight jumps that result in substantial instantaneous accelerations and rapid changes in flight direction, offering enhanced agility and versatility in complex environments. The passive leg design holds potential for direct integration with conventional rotorcraft, unlocking seamless hybrid hopping and flying locomotion. Editor's summary: Conventional jumping robots are actuated in a stance phase, either by a rapid energy release mechanism or with legs driven by actuators. Previous attempts at a jumping and flying robot used these mechanisms for jump-assisted takeoff but struggled to achieve continuous hopping or adjustable jump heights. A new robot called the Hopcopter by Bai et al. combines a commercial quadcopter with a passive telescopic leg. The Hopcopter was actuated in the aerial phase, allowing for continuous hopping, high jump frequencies, and tunable jump height. Intermittent hops led to sudden increases in acceleration and enable highly agile movements such as rapid, tight turns. The robot was also modified with an aerodynamic stabilizer that interacts with air flow to stabilize the robot with only internal sensors. The combination of locomotion modes was shown to increase endurance and power efficiency, which could potentially extend travel distance and operational range for applications in surveillance and inspection. —Melisa Yashinski [ABSTRACT FROM AUTHOR]

The biosafety and sustainability of inorganic perovskites or organic piezopolymers is a major concern in the field of wearable piezoelectric sensors. Naturally occurring, silk fibroin (SF), is a promising alternative for the realization of organic piezoelectric devices due to its excellent biocompatibility and tunable material properties. Nevertheless, its scope for practical sensing applications is limited by the weak innate piezoelectricity of 1 pC N−1. This research aims to improve the piezoelectricity of pristine SF by intrinsically growing non‐toxic metal‐free perovskite (MFP) to achieve organic and bendable silk fibroin‐metal free perovskite (SF‐MFP) composite films. The increase in MFP loading has an influence on the resulting morphology and crystallinity of SF‐MFP films. In comparison to pristine SF, the films with the highest perovskite loading exhibit an enhanced normal piezoelectric response of 4.6 pm V−1. The poled SF‐MFP sensors display an appreciable sensitivity of 0.61 ± 0.05 V N−1 with a fast response time and outstanding stability arising from a synergistic combination of mechanically robust SF and piezoelectric MFP. Furthermore, these sensors can detect various joint bending and muscle movements in human subjects, proving their suitability for wearable bioelectronics. This research demonstrates the potential of biomaterials and organic perovskites for the development of biocompatible and sustainable wearable piezoelectric solutions. [ABSTRACT FROM AUTHOR]

Harnessing abundant kinetic water energy in diverse forms of river flows, ocean waves, tidal currents, raindrops, and others, is highly attractive to ease the energy crisis and satisfy the demands of scattered sensor network nodes in the Internet of things. Among them, raindrops, widely and ubiquitously distributed in nature and ambient living life, have been extensively explored and regarded as significant renewable energy carriers. Extensive efforts have been made to investigate droplet‐based electricity nanogenerators in fundamental mechanism, performance, and applications for achieving sustainable energy demands of the rapidly developing society over the past decade. In this review, we introduce the remarkable progress in this field and discuss the fundamental mechanisms of droplet energy harvesting technology for achieving high‐power generation. More significantly, a systematic review of droplet energy harvesting in different two‐phase interfaces, including liquid–solid, liquid–liquid, and liquid–gas interfaces, is provided. Finally, this survey reveals that droplet‐based electricity generators present vast potential in the power supply. At the same time, several development challenges and prospective solutions are discussed to spur future technological advancements. [ABSTRACT FROM AUTHOR]