Search

In recent times, the soft robotics field has been attracting significant research focus owing to its high level of manipulation capabilities unlike traditional rigid robots, which gives room for increasing use in other areas. However, compared to traditional rigid gripper robots, being capable of controlling/obtaining overall body stiffness when required is yet to be further explored since soft gripper robots have inherently less-rigid properties. Unlike previous designs with very complex variable-stiffness systems, this paper demonstrates a soft gripper design with minimum system complexity while being capable of varying the stiffness of a continuum soft robotic actuator and proves to have potential applications in gripping objects of various shapes, weights, and sizes. The soft gripper actuator comprises two separate mechanisms: the pneumatic mechanism for bending control and the mechanical structure for stiffness variation by pulling tendons using stepper motors which compresses the actuator, thereby changing the overall stiffness. The pneumatic mechanism was first fabricated and then embedded into another silicon layer during which it was also merged with the mechanical structure for stiffness control. By first pneumatically actuating the actuator which causes bending and then pulling the tendons, we found out that the actuator stiffness value can be increased up to 145% its initial value, and the gripper can grasp and lift a weight of up to 2.075 kg.

With the Fourth Industrial Revolution, many factories aim for efficient mass production, and robots are being used to reduce human workloads. In recent years, the field of gripper robots with a soft structure that can grip and move objects without damaging them has attracted considerable attention. This paper proposes a variable-stiffness soft gripper, based on previous designs, with an added silicone coating for increased friction and an EGaIn soft sensor for monitoring grip forces. The variable-stiffness structure used in this study was constructed by connecting soft structures to rigid structures and using tendons fixed to the rigid structures. Furthermore, a more responsive EGaIn soft sensor compared to existing sensors was designed by adding bumps to the path traced by the alloy. After selecting the appropriate fingertip shape, changes in the output of the EGaIn soft sensor corresponding to the object held by the soft gripper were observed, confirming that the strength of the device could be changed according to the intended purpose.

In this paper, soft-morphing, deformation control by fabric structures and soft-jumping mechanisms using magnetic yield points are studied. The durability and adaptability of existing rigid-base jumping mechanisms are improved by a soft-morphing process that employs the residual stress of a polymer. Although rigid body-based jumping mechanisms are used, they are driven by multiple components and complex structures. Therefore, they have drawbacks in terms of shock durability and fatigue accumulation. To improve these problems, soft-jumping mechanisms are designed using soft polymer materials and soft-morphing techniques with excellent shock resistance and environmental adaptability. To this end, a soft jumping mechanism is designed to store energy using the air pressure inside the structure, and the thickness of the polymer layer is adjusted based on the method applied for controlling the polymer freedom and residual stress deformation. The soft jumping mechanism can transfer energy more efficiently and stably using an energy storage and release mechanism and the rounded ankle structure designed using soft morphing. Therefore, the soft morphing and mechanisms of energy retention and release were applied to fabricate a soft robot prototype that can move in the desired direction and jump; the performance experiment was carried out.