Search

Background: Intracoronary imaging improves clinical outcomes after stenting of complex coronary bifurcation lesions (CBLs), but the impact of Medina classification-based CBL distribution on outcomes of imaging-guided bifurcation stenting is unclear. Methods: In this integrated analysis of four previous studies, in which all CBLs were treated with drug-eluting stents under intravascular ultrasound or optical coherence tomography guidance, the distribution of 763 CBLs was assessed using angiographic Medina classification. Major adverse cardiac events (MACE), including target lesion revascularization (TLR), myocardial infarction, stent thrombosis, and cardiac death, were investigated at 1-year follow-up. Results: The most and least prevalent Medina subtypes were 0-1-0 (27.9 %) and 0-0-1 lesions (2.8 %). The most and least frequent MACE/TLR rates were 18.2 %/18.2 % for 0-0-1 lesions and 4.1 %/2.8 % for 0-1-0 lesions. Risks were higher for 0-0-1 lesions than for 0-1-0 lesions for both MACE (hazard ratio [HR]: 4.04, 95 % confidence interval [CI]: 1.21–13.45, p = 0.02) and TLR (HR: 6.19, 95 % CI: 1.69–22.74, p = 0.006). MACE rates were similar for true and non-true CBLs excluding 0-0-1 lesions (8.2 % and 5.9 %, HR 1.54, 95 % CI: 0.86–2.77, p = 0.15), while MACE (HR: 3.25, 95 % CI: 1.10–9.63, p = 0.03) and TLR (HR: 4.24, 95 % CI: 1.38–12.96, p = 0.01) risks were higher for 0-0-1 lesions. Conclusions: This integrated analysis of imaging-guided bifurcation stenting demonstrated similar clinical outcomes in true and non-true CBLs, except for 0-0-1 lesions, which had a significantly higher risk of MACE/TLR.

Background: The impact of coronary bifurcation angle (BA) on incomplete stent apposition (ISA) after crossover stenting followed by side branch (SB) intervention has not been established. Methods: A total of 100 crossover stentings randomly treated with proximal optimization technique followed by short balloon dilation in the SB (POT-SBD group, 48 patients) and final kissing balloon technique (KBT group, 52 patients) were analyzed in the PROPOT trial. Major ISA with maximum distance > 400 μm and its location was determined using optical coherence tomography before SB intervention and at the final procedure. The BA was defined as the angle between the distal main vessel and SB. Optimal POT was determined when the difference in stent volume index between the proximal and distal bifurcation was greater than the median value (0.86 mm3/mm) before SB intervention. Result: Major ISA was more frequently observed in the POT-SBD than in the KBT group (35% versus 17%, p

Imaging-guided coronary bifurcation intervention has improved clinical outcomes due to the appropriate size selection of the devices and optimization of the procedure (sufficient stent expansion, reduction of stent malapposition, appropriate stent landing zone, and detection of vessel dissection). In particular, three-dimensional optical coherence tomography (3D OCT) facilitates clear visualization of stent configuration and guidewire position, which promotes optimal guidewire crossing to the side branch. Successive side branch dilation leads to wide ostial dilation with less strut malapposition. However, the link connection of the stent located on the bifurcated carina has been found to be an impediment to sufficient opening of the side branch, resulting in incomplete strut apposition. In such cases, the aggressive proximal optimization technique improves the jailing strut pattern, and 3D OCT navigates the guidewire crossing to the optimal cell that is most likely to be expanded sufficiently, which is not always a distal cell. In two-stent deployment, 3D OCT facilitates optimal guidewire crossing, which leads to less metallic carina, clustering, and overlapping. The present review describes a method of clear visualization and assessment with 3D OCT and discusses the efficacy of 3D OCT in coronary bifurcation stenting in clinical practice.

Abstract Patient-specific and lesion-specific computational simulation of bifurcation stenting is an attractive approach to achieve individualized pre-procedural planning that could improve outcomes. The objectives of this work were to describe and validate a novel platform for fully computational patient-specific coronary bifurcation stenting. Our computational stent simulation platform was trained using n = 4 patient-specific bench bifurcation models (n = 17 simulations), and n = 5 clinical bifurcation cases (training group, n = 23 simulations). The platform was blindly tested in n = 5 clinical bifurcation cases (testing group, n = 29 simulations). A variety of stent platforms and stent techniques with 1- or 2-stents was used. Post-stenting imaging with micro-computed tomography (μCT) for bench group and optical coherence tomography (OCT) for clinical groups were used as reference for the training and testing of computational coronary bifurcation stenting. There was a very high agreement for mean lumen diameter (MLD) between stent simulations and post-stenting μCT in bench cases yielding an overall bias of 0.03 (− 0.28 to 0.34) mm. Similarly, there was a high agreement for MLD between stent simulation and OCT in clinical training group [bias 0.08 (− 0.24 to 0.41) mm], and clinical testing group [bias 0.08 (− 0.29 to 0.46) mm]. Quantitatively and qualitatively stent size and shape in computational stenting was in high agreement with clinical cases, yielding an overall bias of

Abstract The structural morphology of coronary stents (e.g. stent expansion, lumen scaffolding, strut apposition, tissue protrusion, side branch jailing, strut fracture), and the local hemodynamic environment after stent deployment are key determinants of procedural success and subsequent clinical outcomes. High-resolution intracoronary imaging has the potential to enable the geometrically accurate three-dimensional (3D) reconstruction of coronary stents. The aim of this work was to present a novel algorithm for 3D stent reconstruction of coronary artery stents based on optical coherence tomography (OCT) and angiography, and test experimentally its accuracy, reproducibility, clinical feasibility, and ability to perform computational fluid dynamics (CFD) studies. Our method has the following steps: 3D lumen reconstruction based on OCT and angiography, stent strut segmentation in OCT images, packaging, rotation and straightening of the segmented struts, planar unrolling of the segmented struts, planar stent wireframe reconstruction, rolling back of the planar stent wireframe to the 3D reconstructed lumen, and final stent volume reconstruction. We tested the accuracy and reproducibility of our method in stented patient-specific silicone models using micro-computed tomography (μCT) and stereoscopy as references. The clinical feasibility and CFD studies were performed in clinically stented coronary bifurcations. The experimental and clinical studies showed that our algorithm (1) can reproduce the complex spatial stent configuration with high precision and reproducibility, (2) is feasible in 3D reconstructing stents deployed in bifurcations, and (3) enables CFD studies to assess the local hemodynamic environment within the stent. Notably, the high accuracy of our algorithm was consistent across different stent designs and diameters. Our method coupled with patient-specific CFD studies can lay the ground for optimization of stenting procedures, patient-specific computational stenting simulations, and research and development of new stent scaffolds and stenting techniques.

Abstract Left main (LM) coronary artery bifurcation stenting is a challenging topic due to the distinct anatomy and wall structure of LM. In this work, we investigated computationally and experimentally the mechanical performance of a novel everolimus-eluting stent (SYNERGY MEGATRON) purpose-built for interventions to large proximal coronary segments, including LM. MEGATRON stent has been purposefully designed to sustain its structural integrity at higher expansion diameters and to provide optimal lumen coverage. Four patient-specific LM geometries were 3D reconstructed and stented computationally with finite element analysis in a well-validated computational stent simulation platform under different homogeneous and heterogeneous plaque conditions. Four different everolimus-eluting stent designs (9-peak prototype MEGATRON, 10-peak prototype MEGATRON, 12-peak MEGATRON, and SYNERGY) were deployed computationally in all bifurcation geometries at three different diameters (i.e., 3.5, 4.5, and 5.0 mm). The stent designs were also expanded experimentally from 3.5 to 5.0 mm (blind analysis). Stent morphometric and biomechanical indices were calculated in the computational and experimental studies. In the computational studies the 12-peak MEGATRON exhibited significantly greater expansion, better scaffolding, smaller vessel prolapse, and greater radial strength (expressed as normalized hoop force) than the 9-peak MEGATRON, 10-peak MEGATRON, or SYNERGY (p

Background: The jailing strut configuration with link-free and distal guidewire recrossing (LFD) at the side branch orifice (SBO) reduces incomplete stent apposition (ISA) after kissing balloon technique (KBT) in crossover stenting of coronary bifurcation lesions (CBLs). However, data regarding vascular healing after KBT are lacking. We investigated vascular healing 9 months after crossover stenting followed by KBT with optical coherence tomography (OCT) guidance in a prospective multicenter registry. Methods: Fifty-nine patients with CBLs (LFD, 35 patients; non-LFD, 24 patients) were studied. The jailing configuration of the SB and the wire-recrossing position, incidence of ISA and uncovered struts, and neointima unevenness score (NUS) in the main vessel (MV) after 9 months were determined by off-line 3D-OCT in the core laboratory. Results: The ISA rate was significantly higher at the SB ostium and distal MV after KBT in the non-LFD group, compared to the LFD group. After 9 months, incidence of ISA (18.3 ± 18.2 vs. 6.0 ± 8.7%, p

BackgroundA coronary bifurcation stenting is still a challenging issue due to frequent restenosis and stent thrombosis even with drug-eluting stents. The bifurcation angle (BA) between a main vessel and a side branch is one of the crucial determinants of coronary flow and shear stress that affect the plaque distribution. Previous bench and clinical studies have evaluated the impact of the BA between the proximal main vessel and the side branch (Angle A) and the BA between the distal main vessel and the side branch (Angle B) on the clinical outcomes of bifurcation stenting. However, the impact has not yet been fully elucidated due to a lack of statistical power or different manner of the assessment of BA.ObjectivesTo analyze the published studies on coronary artery BA, the modalities used for assessment, and the impact of BA on interventions and attempt to define the pre-procedural protocols.Data sourcesA scoping review was performed using the Joanna Briggs Institute Methodology. A total of 52 relevant references were selected from PubMed, Cochrane Library, and CINAHL databases and categorized into three topic areas.Results and conclusionsA wider Angle A is associated with the increased likelihood of carina shift and a wider Angle B, with that of side branch occlusion. A wider Angle B promotes stent malapposition and deformation in the side branch ostium and has been reported as an independent predictor of major adverse cardiac events after bifurcation stenting; however, improvement of the drug-eluting stent, refinement of the stenting technique, and accurate 3-dimensional assessment may attenuate the adverse clinical impact of a wider BA.Implications of key findingsAssessment of the BA is necessary to predict the effect of bifurcation intervention procedure on the stent configuration and coronary flow at the bifurcated vessels. This will help to optimize stent selection and the stenting technique.

Background: Performance of percutaneous coronary intervention (PCI) in side-branch vessels (SB-PCI) has not been fully investigated despite the technical advancement of PCI. Methods: We investigated 257,492 patients registered in the Japanese nationwide PCI registry from January to December 2018; 199,767 (78%) underwent PCI for major vessel PCI (MV-PCI), 21,555 (8.4%) underwent SB-PCI, and 24,862 (9.6%) underwent PCI for both vessels (SB + MV-PCI). The frequencies of primary composite adverse events, defined as in-hospital mortality and procedural complications (i.e., peri-procedural myocardial infarction, tamponade, new-onset cardiogenic shock, stent thrombosis, emergent surgery, and bleeding), and PCI for restenotic lesions were investigated. Their association with institutional frequency of each PCI was also investigated. Results: Fewer drug-eluting stents (66% vs. 86%) and more drug-coated balloons (23% vs. 9%) were used in SB-PCI than in MV-PCI (p

Abstract We reported a case that the insertion of a 48‐mm‐long stent in a calcified coronary lesion after rotational atherectomy led to stent stacking and S‐shaped flection, resulting in longitudinal coronary perforation without stent inflation. Its flexibility and length pose a possible risk of deformation inside the vessel during stent insertion.

This article comprised the data related to the research article entitled “Feasibility and usefulness of three-dimensional optical coherence tomography guidance for optimal side branch treatment in coronary bifurcation stenting” (Nagoshi et al., In press) [1].In this article we reports details about two patterns of guide wire (GW) recrossing position after crossover stenting in bifurcation lesion classified with three-dimensional optical coherence tomography (3D-OCT) (Okamura et al., 2014) [2] and follow-up data about the treatment with percutaneous coronary intervention(PCI) for bifurcation lesion in terms of the two- (2D) or 3D-OCT guidance. Subgroup analysis about differences in the parameters between the proximal and the distal GW recrossing patterns are analyzed here. Keywords: Optical coherence tomography, Bifurcation stenting, Kissing balloon inflation, Three-dimensional

We present the case of a young pregnant woman with cardiopulmonary arrest due to acute coronary syndrome. Emergent coronary angiography (CAG) and intravascular ultrasound (IVUS) showed extensive coronary artery dissection in the left anterior descending artery, which was treated with primary percutaneous coronary intervention. After managing the heart failure and disseminated intravascular coagulation, a dead fetus was delivered via caesarean section 4 days after admission to the hospital. Follow-up CAG and IVUS at 18 months showed persistent dissection in the non-stented site; hence, another stent was implanted. Dual antiplatelet therapy was discontinued 6 months later; however, aspirin and beta-blockers were continued lifelong. [ABSTRACT FROM AUTHOR]