Search

The dehydrogenation of saturated substrates is fundamentally essential for producing value-added unsaturated organic molecules both in academia and industry. In recent years, homogeneously catalyzed acceptorless C–C, C–N, and C–O bond desaturations have attracted increasing attention due to high atom economy, environmentally benign nature, and wide availability of the starting materials. This short review discusses the acceptorless dehydrogenation of aliphatics, alcohols, and amines by homogeneous catalytic systems based on two categories of reaction mechanisms: thermal transition-metal-catalyzed two-electron pathway and photoredox catalyzed or electrochemically driven one-electron pathway. 1 Introduction 2 Catalytic Acceptorless Dehydrogenation of Aliphatics 3 Catalytic Acceptorless Dehydrogenation of Amines 4 Catalytic Acceptorless Dehydrogenation of Alcohols 5 Conclusion [ABSTRACT FROM AUTHOR]

Objective: To investigate the correlation between intravoxel incoherent motion diffusion-weighted imaging (IVIM-DWI) and the pathological classification of idiopathic orbital inflammatory pseudotumors (IOIPs). Methods: Nineteen patients who were diagnosed with IOIPs (a total of 24 affected eyes) between November 2018 and December 2020 were included in the study. All the patients underwent magnetic resonance imaging orbital plain scans and IVIM-DWI multiparameter scans before an operation. The true diffusion coefficient (D), pseudodiffusion coefficient (D*), and perfusion fraction (f) values were obtained. Based on histopathology, the lesions were divided into three types: lymphocytic infiltration, fibrosclerotic, and mixed. The correlation between IVIM-DWI parameters and pathological classification was tested with the histopathological results as the gold standard. The data were analyzed using SPSS version 17.0, with P < 0.05 defined as significant. Results: Among the 19 patients (24 eyes) affected by IOIP, there were no significant differences between IOIP pathological classification and gender or age (P > 0.05). There were statistically significant differences between the D and f values for different pathological types of IOIP and IVIM parameters (P < 0.05), and there was no significant difference in D* value between the different pathological types (P > 0.05). Conclusion: The D and f values showed correlation with different types of IOIP, and the sensitivity of the D value was higher than that of the f value. The D* value showed no significant distinction between pathological types of IOIP. [ABSTRACT FROM AUTHOR]

Purpose: To summarize the experience and outcomes of total endovascular repair of thoracoabdominal aortic disease using 3-dimensional (3D) printed models to guide on-site creation of fenestrations in aortic stent-grafts. Materials and Methods: From April 2018 to March 2019, 34 patients (mean age 58±14 years; 24 men) with thoracoabdominal aortic disease were treated in our department. Nineteen patients had thoracoabdominal aortic dissection and 15 had thoracoabdominal aortic aneurysm. Preoperatively, a 3D printed model of the aorta was made according to computed tomography images. In the operating room, the main aortic stent-graft was completely released in the 3D printed model, and the position of each fenestration or branch was marked on the stent-graft. The fenestrations were then made using an electric pen. Wires were sewn to the edge of the fenestrations using nonabsorbable sutures. After customization, the aortic stent-graft was reloaded into the delivery sheath and deployed. Results: The printing process took ~5 hours (1 hour for image reconstruction, 3 hours for printing, and 1 hour for postprocessing). The physician-modified stent-grafts had a total of 107 fenestrations secured by 102 bridging stent-grafts, including 73 covered stents and 29 bare stents. The average procedure time was 5.6±1.2 hours, including a mean 1.3 hours for stent-graft customization. No renal insufficiency or paraplegia occurred. Two branch arteries were lost during the operation. One patient (3%) died 1 week after surgery from a retrograde dissection rupture. One patient developed a minor cerebral infarction postoperatively. The mean follow-up time was 8.5 months. There was 1 endoleak from a fenestration (coil embolized) and 4 distal ruptures of the aortic dissection (3 treated and 1 observed). Conclusion: Three-dimensional printing can be used to guide creation of fenestrated stent-grafts for the treatment of thoracoabdominal aortic diseases involving crucial branches. This technique appears to be more accurate than the traditional measurement method, with short-term follow-up demonstrating the safety and reliability of the method. However, further research and development are needed. [ABSTRACT FROM AUTHOR]

A protocol for iodine‐catalyzed oxidative rearrangement of tertiary and secondary amines has been developed. This metal‐free protocol provides an atom‐economical, efficient access to synthetically useful α‐amino acid derivatives from readily available acyclic and cyclic tertiary or secondary amines. [ABSTRACT FROM AUTHOR]

In this study, 2,7-bi-(N-penothiazinyl)fluorenone was employed as photocatalyst (PC), ethyl α-bromophenylacetate (EBP) as atom transfer radical polymerization (ATRP) initiator, and photo-induced metal-free ATRP of methyl methacrylate (MMA) was performed at 25°C under blue light irradiation. PMMAs with well-defined architectures and precisely controlled chain lengths were synthsized. The kinetics results confirmed that molecular weights increased linearly with monomer consumption. The molecular weight distributions (Mw/Mn) of the resultant PMMA were narrow. The polymerization was activated and deactivated by periodic light control process.1H nuclear magnetic resonance spectrometer (NMR) and gel permeation chromatography (GPC) were used to characterize the obtained PMMAs. The living characters of the polymerization system were further confirmed by chain extension of from the PMMA-Br macroinitiator. [ABSTRACT FROM AUTHOR]

In this study, reduced grapheme oxide (RGO)/BiVO4composite was prepared and characterized by FT-IR, XRD, and UV spectrum. Photo-chemically-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was successfully performed at 25°C in N,N-dimethylformamide (DMF) with RGO/BiVO4as photoinitiator, FeCl3·6H2O/triphenylphosphine (PPh3) as catalyst, and ethyl 2-bromoisobutyrate as ATRP initiator. MMAs were polymerized in a controlled manner under ultraviolet (UV) light and sunlight conditions. The results show that a first-order kinetics model was obeyed up to higher conversion. The reaction gave well-controlled PMMA with Mn,GPCclose to the theoretical value and a narrow MWD (Mw/Mn<1.5). The experiments of light on and off reveal the photoredox cycle between Fe(III) and Fe(II) species. The living character was further verified by the chain extension experiments. [ABSTRACT FROM AUTHOR]

A copper-catalyzed Mannich-type oxidative β-functionalization reaction of amines has been developed. In the presence of an oxidant and a copper catalyst, tertiary amines reacted with N-tosylimines, providing synthetically important 1,3-diamines and enamines, respectively. Preliminary mechanistic studies suggested that the oxidation of the tertiary amine to the enamine intermediate triggers subsequent Mannich-type reactions with N-tosylimines and thus enables the direct β-functionalization of the tertiary amines. [ABSTRACT FROM AUTHOR]

Abstract: Nano-sized TiO2/WO3 bilayer coatings were prepared on type 304 stainless steel substrate by sol–gel method. The performance of photo-electrochemical and photogenerated cathode protection of the coating was investigated by the electrochemical method. The results show that the bilayer coating with four TiO2 layers and three WO3 layers exhibits the highest photo-electrochemical efficiency and the best corrosion resistance property. Type 304 stainless steel with the coating can maintain cathode protection for 6h in the dark after irradiation by UV illumination for 1h. In addition, the mechanism of the photogenerated cathode protection for the bilayer coating was also explored. [Copyright &y& Elsevier]

The dehydrogenation of abundant alkane feedstocks to olefins is one of the mostly intensively investigated reactions in organic catalysis. A long-standing, pervasive challenge in this transformation is the direct dehydrogenation of unactivated 1,1-disubstituted ethane, an aliphatic motif commonly found in organic molecules. Here, we report the design of a diphosphine chloroiridium catalyst for undirected dehydrogenation of this aliphatic class to form valuable 1,1-disubstituted ethylene. Featuring high site selectivity and excellent functional group compatibility, this catalytic system is applicable to late-stage dehydrogenation of complex bioactive molecules. Moreover, the system enables unprecedented dehydrogenation of polypropene with controllable degree of desaturation, dehydrogenating more than 10 in 100 propene units. Further derivatizations of the resulting double bonds afford functionalized polypropenes.

Herein, we describe a novel protocol for visible-light-induced α,γ-C(sp 3 )-H difunctionalization of piperidines. This redox-neutral, atom-economical protocol, which exhibits a broad substrate scope and good functional group compatibility, constitutes a concise, practical method for constructing piperidine-containing bridged-ring molecules. Preliminary mechanistic studies indicated that highly regioselective activation of the inert γ-C(sp 3 )-H bond of piperidines was achieved through a 1,5-hydrogen atom transfer reaction of a nitrogen radical generated in situ.

The value of catalytic dehydrogenation of aliphatics (CDA) in organic synthesis has remained largely underexplored. Known homogeneous CDA systems often require the use of sacrificial hydrogen acceptors (or oxidants), precious metal catalysts, and harsh reaction conditions, thus limiting most existing methods to dehydrogenation of non- or low-functionalized alkanes. Here we describe a visible-light-driven, dual-catalyst system consisting of inexpensive organophotoredox and base-metal catalysts for room-temperature, acceptorless-CDA (Al-CDA). Initiated by photoexited 2-chloroanthraquinone, the process involves H atom transfer (HAT) of aliphatics to form alkyl radicals, which then react with cobaloxime to produce olefins and H 2 . This operationally simple method enables direct dehydrogenation of readily available chemical feedstocks to diversely functionalized olefins. For example, we demonstrate, for the first time, the oxidant-free desaturation of thioethers and amides to alkenyl sulfides and enamides, respectively. Moreover, the system's exceptional site selectivity and functional group tolerance are illustrated by late-stage dehydrogenation and synthesis of 14 biologically relevant molecules and pharmaceutical ingredients. Mechanistic studies have revealed a dual HAT process and provided insights into the origin of reactivity and site selectivity.

3-Phosphoinositide-dependent protein kinase-1 (PDK1) plays a critical role in the development of mammalian brain. Here, we investigated the role of PDK1 in Purkinje cells (PCs) by generating the PDK1-conditional knock-out mice (cKO) through crossing PV-cre or Pcp2-cre mice with Pdk1 fl/fl mice. The male mice were used in the behavioral testing, and the other experiments were performed on mice of both sexes. These PDK1-cKO mice displayed decreased cerebellar size and impaired motor balance and coordination. By the electrophysiological recording, we observed the reduced spontaneous firing of PCs from the cerebellar slices of the PDK1-cKO mice. Moreover, the cell body size of PCs in the PDK1-cKO mice was time dependently reduced compared with that in the control mice. And the morphologic complexity of PCs was also decreased after PDK1 deletion. These effects may have contributed to the reduction of the rpS6 (reduced ribosomal protein S6) phosphorylation and the PKCγ expression in PDK1-cKO mice since the upregulation of pS6 by treatment of 3-benzyl-5-((2-nitrophenoxy) methyl)-dihydrofuran-2(3H)-1, the agonist of mTOR1, partly rescued the reduction in the cell body size of the PCs, and the delivery of recombinant adeno-associated virus-PKCγ through cerebellar injection rescued the reduced complexity of the dendritic arbor in PDK1-cKO mice. Together, our data suggest that PDK1, by regulating rpS6 phosphorylation and PKCγ expression, controls the cell body maintenance and the dendritic development in PCs and is critical for cerebellar motor coordination. SIGNIFICANCE STATEMENT Here, we show the role of 3-phosphoinositide-dependent protein kinase-1 (PDK1) in Purkinje cells (PCs). The ablation of PDK1 in PCs resulted in a reduction of cell body size, and dendritic complexity and abnormal spontaneous firing, which attributes to the motor defects in PDK1-conditional knock-out (cKO) mice. Moreover, the ribosomal protein S6 (rpS6) phosphorylation and the expression of PKCγ are downregulated after the ablation of PDK1. Additionally, upregulation of rpS6 phosphorylation by3-benzyl-5-((2-nitrophenoxy) methyl)-dihydrofuran-2(3H)-1 partly rescued the reduction in cell body size of PCs, and the overexpression of PKCγ in PDK1-KO PCs rescued the reduction in the dendritic complexity. These findings indicate that PDK1 contributes to the maintenance of the cell body and the dendritic development of PCs by regulating rpS6 phosphorylation and PKCγ expression., (Copyright © 2020 the authors.)

A new strategy featuring an iridium-catalyzed asymmetric hydrogenation of a racemic ketone via dynamic kinetic resolution to generate a cyclopentanol with three contiguous stereocenters and a SmI2-promoted pinacol coupling to install the six-membered ring with correct stereochemistry has been described for the enantioselective total synthesis of (-)-hamigeran B (19 steps, 10.6% overall yield) and (-)-4-bromohamigeran B (19 steps, 12.3% overall yield).

The first nickel-catalyzed intermolecular hydroacylation reaction of alkenes with simple aldehydes has been developed. This reaction offers a new approach to the selective preparation of branched ketones in high yields (up to 99%) and branched selectivities (up to 99:1). Experimental data provide evidence for reversible formation of acyl-nickel-alkyl intermediate, and DFT calculations show that the aldehyde C-H bond transfer to a coordinated alkene without oxidative addition is involved. The origin of the reactivity and regioselectivity of this reaction was also investigated computationally, which are consistent with experimental observations.