Search

Microdialysis is a continuous direct sampling technique used in live animals to study pharmacokinetic (PK) characteristics of drugs directly in target organs. The antibiotic tilmicosin used to treat arthritis in chickens caused by Mycoplasma synoviae. However, the PK study of tilmicosin in chicken joint has not been reported. The aim of this study was to explore the PK characteristics and penetration of tilmicosin by microdialysis incorporated with High‐Performance Liquid Chromatography Mass Spectrometry (HPLC‐MS/MS). An articular cavity microdialysis sampling model was established by determining in vivo and in vitro recovery results. Tilmicosin was orally administered to chickens and flow rate testing combined with retro‐dialysis were used to determine tilmicosin concentration in the target synovial space. HPLC‐MS/MS quantification of tilmicosin from plasma and joint dialysate indicated that recovery was negatively correlated with flow rate and the optimal perfusion rate was determined to be 1.0 μL/min. The AUC, Cmax, MRT and t1/2 in plasma were 4.6, 3.0, 2.2 and 1.6 times higher than in the joint dialysate, respectively, but Tmax did not significantly differ. The penetration of tilmicosin from plasma to joint (AUCdialysate/AUCplasma) was 0.24 and indicated tilmicosin concentration in joints was much lower than that of plasma. Microdialysis technology provides a novel technique to study pharmacokinetics directly in target tissues and our study provides a reference for the clinical use of tilmicosin for treatment of M. synoviae infections in articular cavities. [ABSTRACT FROM AUTHOR]

The biodegradable and bioactive bioscaffolds with suitable hierarchical structure, customized shape, and mechanical performance have great potential for biomedical applications especially in tissue engineering field. However, controllable and facile preparation of the related porous scaffolds remains obvious challenge. In this study, poly(ε‐caprolactone) (PCL)‐embedded hydroxyapatite (HAP) nanoparticles/collagen hierarchical scaffolds are facilely prepared basing on 3D printing of the pre‐crosslinked oil in water type Pickering high internal phase emulsion (HIPE) hydrogel. To be specific, in the HAP nanoparticle stabilized Pickering HIPEs, the aqueous phase contains collagen and genipin, and the oil phase is dichloromethane solution of PCL. After the pre‐crosslinking of aqueous phase, the prepared Pickering HIPE turns into emulsion hydrogel with high viscosity and shear thinning characteristics, which can be individually printed and then freeze dried to produce hierarchical scaffolds with the designed structures. The related multiscale pore structures are composed of mm‐scale macropores and μm‐scale micropores, and the related porosity is higher than 84%. Increasing PCL content obviously enhances the compression stress of scaffolds, particularly the compressive stress of porous scaffold prepared with PCL content of 14 w/v% is about 9 times as large as that of porous scaffold without PCL. The results of in vitro mineralization and cell culture assay show that the porous scaffolds have favorable apatite formation ability and biocompatibility. Thus, the prepared hierarchical scaffolds with the designed structures, customized shape and adjustable performance are promising potential applications in bone tissue engineering. [ABSTRACT FROM AUTHOR]

The development of light‐based three‐dimensional (3D) printing has changed the manufacturing processes from various materials. The advantages of printing using customized materials are gradually highlighted due to excellent and reliable precision, high repeatability, and wide range of build materials, which enable customized materials to be use in aerospace, biomedical, engineering, and other fields. Due to the existence of acrylate group or epoxy group, most of the commonly used photoactive macromolecules have the main limitations of poor water solubility and/or high biological stimulation, severely constraining the widespread application of these materials in biomanufacturing. To overcome these challenges, a natural hydrogel was modified in this study to achieve a new photocurable material with good biocompatibility and photocrosslinking activity. In particular, methacrylate‐carboxymethyl cellulose (Me‐CMC) was esterified by hydroxyl groups on the long chains of CMC, and hydroxyethyl methacrylate (HEMA)/acrylamide (Am) was added as the crosslinking reaction point between the long molecular chains. Thus, networked structures of this biocompatible material can be formed by photo crosslinking in digital light processing (DLP). The developed composite hydrogel can facilitate the rapid prototyping and high precision manufacturing. The mechanical toughness, swelling property, and microstructures of the composite hydrogel were tunable by changing HEMA/Am content. In addition, it was found that cell survival rate of this photocurable composite hydrogel was good by culturing bone marrow stromal cells (BMSCs) with the material and, cells proliferated significantly in a short time (7 days), which proved the biocompatibility of the proposed material. [ABSTRACT FROM AUTHOR]

The sustainable development of China's high-tech manufacturing (HTM) sector is restricted by dependence on technology introduction and foreign direct investment (FDI), low input-output efficiency, and environmental pollution. This study aimed to examine the roles of technology introduction and FDI in improving the technical efficiency of Chinese HTM from an environmental perspective. By integrating stochastic frontier analysis (SFA) and projection pursuit (PP) based on the real-coded accelerated genetic algorithm (RAGA), this study constructed a RAGA-PP-SFA model that considers undesirable outputs. This model includes various outputs, including environmental pollution, in the production function to improve estimation accuracy. Moreover, to verify the robustness of the estimation results, the results were provided when environmental pollutants were taken as input factors. The results showed that technology introduction could significantly promote HTM's technical efficiency, while FDI had no significant positive effect. By comparing the estimated results with those that did not consider environmental pollution, this study not only reveals different roles of technology introduction and FDI in improving HTM's technical efficiency but also confirms that ignoring environmental pollution will overestimate their roles (especially the role of FDI) in such improvement. [ABSTRACT FROM AUTHOR]

Earlier studies on the innovation process in the high-tech manufacturing industry failed to take environmental pollution into account, making it difficult to estimate green innovation efficiency in the industry. From a perspective of innovation value chain, this paper decomposes green innovation process in the high-tech manufacturing industry into two stages: R&D stage and achievement transformation stage; a network DEA approach considering undesirable outputs is utilized to estimate the green innovation efficiency in China's high-tech manufacturing industry. Compared with the method of conventional innovation efficiency without considering environmental pollution, the estimation method for green innovation efficiency can not only avoid bias of estimation results of provinces producing low pollution emissions like Inner Mongolia and Hainan but also reflect the volatility in efficiency of the high-tech manufacturing industry before and after the implementation of the environmental law. [ABSTRACT FROM AUTHOR]

The deposition of TiO2-P25 on Pyrex glass is studied in order to propose a procedure for obtaining uniform and adherent thin films with a controlled thickness in the range between fractions of micrometer to a few tens of micrometers. Different deposition methods such as spray-coating, dip-coating, and drop-coating of liquid suspensions of TiO2-P25 powder are considered. The effects of pretreatment of the glass support, as well as postdeposition steps such as drying condition and thermal treatment, are also reported. A basic glass pretreatment and an acidic TiO2suspension are chosen for an optimized adherence of the film. Drop-coating, associated with a slow drying under 55% relative humidity and a high-temperature thermal treatment is the method of choice to prepare coated glass slides in a large range of film thicknesses. [ABSTRACT FROM PUBLISHER]

The combination of piezoelectric material and ball milling leads to new frontiers in catalysis research. Here we used piezoelectric BaTiO 3 nanoparticles as the additive for the degradation of dye pollutant in solid state in ball milling process. With the assistant of ppm level CuBr 2 and H 2 O 2 , high degradation conversion (> 99%) of dyes can be achieved in short time (10 min). BaTiO 3 nanoparticles became temporarily highly polarized particles during BM process and generated electron-hole. These particles exhibited strong reducing properties and reduced Cu(II) into the active Cu(I) species which can catalyze H 2 O 2 to generate highly active ·O2– to enhance the dye degradation. In addition to the general applicability for different dyes and larger scales, this BaTiO 3 assist BM process was deduced to be a promising powerful platform for organic pollutant treatment in solid states. Piezoelectric BatiO 3 nanoparticles was used as the additive to catalyze the efficient degradation of dyes in ball milling system. [Display omitted] • Combination of piezoelectric material and ball milling for dye degradation. • Electro-mechanochemical redox process with the assistant of ppm level CuBr 2 and H 2 O 2. • Highly dye degradation efficiency in solid states. [ABSTRACT FROM AUTHOR]

Ethylene is an important chemical raw material and with the increasing consumption of petroleum resources, the production of ethylene through the calcium carbide acetylene route has important research significance. In this work, a series of bimetallic catalysts with different Cu/Ni molar ratios are prepared by co-impregnation method for the hydrogenation of calcium carbide acetylene to ethylene. The introduction of an appropriate amount of Cu effectively inhibits not only the formation of ethane and green oil, thus increasing the selectivity of ethylene, but also the formation of carbon deposits, which improves the stability of the catalyst. The ethylene selectivity of the Ni–Cu bimetallic catalyst increases from 45% to 63% compared with the Ni monometallic counterpart and the acetylene conversion still can reach 100% at the optimal conditions of 250 °C, 8000 mL·g−1·h−1 and V(H2)/V(C2H2) = 3. X-ray diffraction and transmission electron microscopy confirmed that the metal particles were highly dispersed on the support, High-resolution transmission electron microscopy and H2-Temperature programmed reduction proved that there was an interaction between Ni and Cu, combined with X-ray photoelectron spectroscopy and density functional theory calculations results, Cu transferred electrons to Ni changed the Ni electron cloud density in NiCux catalysts, thus reducing the adsorption of acetylene and ethylene, which is favorable to ethylene selectivity. [ABSTRACT FROM AUTHOR]

Cubosomes, as biocompatible carriers in drug delivery systems, consist of curved bicontinuous lipid bilayers. With a honeycombed structure divided into two internal aqueous channels, cubosomes could be used for many bioactive ingredients. Achyranthes bidentata polysaccharides (ABPs) are isolated from the roots of Achyranthes bidentata , used in Chinese herbal medicine, and present a noticeable effect as an immunomodulator. This study investigates the optimal preparation of combined cubosome-ABP (Cub-ABP) nanoparticles using response surface methodology and explores their characteristics and stability. The encapsulation efficiency of optimized Cub-ABPs was 72.59%. In-vitro stability studies demonstrated the stability of Cub-ABPs and cubosome nanoparticles without ABPs; both were stable for up to 25 days. Safe concentrations of Cub-ABPs and cubosome nanoparticles without ABPs are 104.06 μg/mL and 208.13 μg/mL with comparatively low cytotoxicity against lymphocytes. Moreover, the feasible immunomodulatory effects of Cub-ABPs were determined by evaluating their proliferation and change of CD4 + /CD8 + ratio on splenic lymphocytes in vitro . Proliferation and flow cytometry studies revealed that, compared with free ABPs and blank cubosomes, Cub-ABPs proved more effective in promoting lymphocyte proliferation and in triggering the transformation of T-lymphocytes into T h -cells. [ABSTRACT FROM AUTHOR]

In this study, angelica sinensis polysaccharide (ASP) was encapsulated into the Poly (lactic-co-glycolicacid) (PLGA) to constitute the ASP-PLGA. The aim of the study is to obtain optimal encapsulation efficiency of ASP-PLGA by optimizing the preparation conditions and investigate the immunological enhancement activity of ASP-PLGA. To obtain the optimal processing parameters, the parameters, such as the ratio of organic phase (o) to internal water phase (w 1 ), the ratio of external water phase (w 2 ) to organic phase (o) and the concentration of Pluronic F68 (F68) (w/v) were examined through response surface methodology (RSM). The optimum preparation conditions of ASP-PLGA for maximizing encapsulation efficiency (EE) was as follows:ratio of organic phase (o) to internal water phase (w 1 ) at 10:1, ratio of external water phase (w 2 ) to organic phase (o) at 11:1, the concentration of F68 at 0.8% and the experimental EE 67.89 ± 0.48% was achieved. In addition, the results showed that ASP-PLGA could significantly promote the lymphocytes proliferation and increase the ratio of CD4 + to CD8 + T cells compared with ASP and blank PLGA. This study provided strong evidence that the immunological enhancement of ASP was significantly improved through establishing a drug delivery system with PLGA. [ABSTRACT FROM AUTHOR]

Historical literature and pharmacological studies both suggest that Astragalus membranaceus (A. membranaceus) holds potential benefits for diabetic kidney disease (DKD), which is a growing burden with limited proven renal protective options. Aim of the study : An updated systematic review was conducted to evaluate the efficacy and safety of A. membranaceus preparations as an adjunctive therapy to conventional therapies for DKD. Nine databases and five clinical trial registries were searched for randomized controlled trials (RCTs) of A. membranaceus preparations added to conventional therapies compared with conventional therapies alone for people with DKD. Study screening, data collection, and quality assessment were performed independently by two reviewers. Estimated effects were pooled as mean differences or standardized mean differences with 95% confidence intervals by using a random-effects model. Sixty-six studies, involving 4785 DKD participants, were included. The quality of the included studies was low due to methodological shortfalls. Meta-analysis showed that additional use of A. membranaceus injection reduced more albuminuria (32 RCTs, 2253 participants; SMD: 2.05 [–2.49, −1.61], I2 = 94%), proteinuria (26 RCTs, 1812 participants; SMD: 1.85 [–2.34, −1.37], I2 = 95%), and serum creatinine levels (32 RCTs, 2880 participants; −14.78 μmol/L [–19.22, −10.33], I2 = 97%) than conventional therapies alone did. An anti-albuminuria effect was also observed in the oral A. membranaceus preparation group (four RCTs, 236 participants; SMD: 1.27 [–1.82, −0.73], I2 = 73%). Meta-regression suggested that the treatment effect of A. membranaceus injection was associated with the baseline serum creatinine level. The adverse-events profile was similar between the additional A. membranaceus and control groups. The low quality of evidence suggested that adjunctive use of A. membranaceus preparations in addition to conventional therapies may be effective and tolerated for short-term reduction of albuminuria, proteinuria, and serum creatinine in DKD patients. The findings should be considered with caution due to the lack of high-quality RCTs and significant heterogeneity and publication bias. Further RCTs are needed to confirm the long-term efficacy and safety of A. membranaceus preparations, especially of the oral form, in patient-important outcomes. Image 1 [ABSTRACT FROM AUTHOR]

Promoting technology transfer is an important strategic measure for China to promote industrial innovation. However, there is little research exploring the influence of technology transfer on the green innovation efficiency (GIE) of China's high-tech industry (HTI). From the perspective of process, green innovation in HTI is a continuous three-stage system including research and development (R&D), commercialization, and diffusion. Therefore, we measure the GIE of China's HTI by using a three-stage network data envelopment analysis (NDEA) model considering environmental pollution and establish a series of regression models to investigate the role of the two main ways of technology transfer, domestic technology acquisition (DTA) and foreign technology introduction (FTI), in improving the GIE of HTI. The results show that the average GIE of China's HTI is 0.7727 from 2011 to 2020. Except for Jiangsu, Guangdong, Qinghai, and Xinjiang, green innovation in HTI in other provinces in China is inefficient. DTA has significantly promoted GIE in HTI. FTI has a positive impact on the GIE of HTI but is not statistically significant. The robustness test confirmed these results. This study is helpful to understand the differences between the effects of DTA and FTI on the GIE of China's HTI, to provide a basis for adjusting technology transfer policies., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Zhou and Peng.)

Icariin as a hepatoprotector from Herba epimedii can expand the cardiovascular and cerebral blood vessels, promote hematopoietic functions, enhance the immune system and show anti-liver tumor activities. However, its low solubility (0.02 mg/mL) limits its clinical applications as food and medical supplements. Through complexation with HP- γ -cyclodextrin by using a trace amount of water-soluble polymer, the water solubility of icariin was increased by 654 times, which is the best result to date for the water solubility study of icariin. In an in vitro pharmacokinetic study, the complexation increased the dissolution rate of icariin by 80 times, and the icariin complex can be 100% released in the first few minutes. Through complexation, in an in vivo dog pharmacokinetic study, the C max of icariin was increased about 5 times, the AUC 0-120 was increased about 20 times and the clearance of icariin was changed from 11.17 L/h/kg to 0.65 L/h/kg. The half-life time was changed from 0.68 h to 6.38 h and the relative bioavailability was increased by nearly 20 times, indicating that less drug is needed for the same therapeutic effect by using the icariin complex, and the complex can be used as a potential potent hepatoprotector or anti-liver cancer drug., Competing Interests: Author SZ was employed by Eastern Along Pharmaceutical Co., Ltd. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Ding, Yu, Zhou, Ding, Zhang, Xu and Xu.)

Background: Respiratory tract infection (RTI) is associated with a higher risk of kidney failure in patients with chronic kidney disease (CKD), without effective precautions. Self-administered acupressure (SAA) has been shown to potentially prevent RTI, but still lack of clinical evidence in CKD. The present randomized controlled trial assessed the efficacy and safety of SAA in preventing RTI recurrence in patients with CKD., Methods: Participants with CKD who had been diagnosed with RTI on more than 2 occasions in the preceding 12 months were enrolled between November 6, 2017, and August, 6, 2018. They were randomly assigned (1:1) to receive daily SAA combined with usual care (intervention) or usual care alone (control) for 24 months. The primary outcome was time to first RTI. Secondary outcomes were RTI rate, kidney function, proteinuria and serum immune indicators, detected by the clinical laboratory in the hospital. The study would be discontinued if the participant met the criteria of stopping the study. Kaplan-Meier method and multivariable Cox proportional hazards regression were used to compare the primary outcome between the two groups., Results: Among the 540 patients screened, 114 participants were randomly assigned to the intervention group (n=57) or the control group (n=57). The median follow-up duration was 24.4 months. Compared with controls, participants in the intervention group did not have a significantly lower risk of RTI according to Kaplan-Meier analysis, but did have a significantly lower risk of RTI according to competing risk analysis (HR 0.65, 95% CI: 0.42-1.00; P=0.05), when considering endpoint (dialysis or death) and loss to follow-up as competing risks, and had a significantly lower rate of RTI [1.65 vs. 2.19 episodes per patient-year, respectively; incidence rate ratio (IRR) 0.75, 95% CI: 0.62-0.92; P=0.006]. Apart from lower study serum IgG levels in the intervention group at 24 months (mean difference 0.68 g/L; 95% CI: 0.07-1.29; P=0.029), all other secondary outcomes and overall adverse events were comparable between the 2 groups., Conclusions: SAA is a promising effective and safe therapy for preventing RTI in patients with CKD. However, the efficacy of SAA in children and adolescents still needs further study., Trial Registration: Chinese Clinical Trials Registry identifier: ChiCTR-IOR-17012654., Competing Interests: Conflicts of Interest: All authors have completed the ICMJE uniform disclosure form (available at https://atm.amegroups.com/article/view/10.21037/atm-22-2376/coif). XL reports receiving funding from Program of the State Key Laboratory of Dampness Syndrome of Chinese Medicine (No. SZ2021ZZ43) without any payment. LZ reports receiving funding from Guangzhou Science and Technology Project (No. 2016201604030085) and funding from Program of the State Key Laboratory of Dampness Syndrome of Chinese Medicine (No. SZ2021ZZ16) without any payment. The other authors have no conflicts of interest to declare., (2022 Annals of Translational Medicine. All rights reserved.)

Background: Many cases of coronary artery spasm (CAS) during general plus epidural anesthesia have been reported. But transversus abdominis plane(TAP) block in combination with general anesthesia has not been reported to be a cause of CAS, let alone a life-threatening CAS., Case Presentation: In this case report, we present a case of a patient with CAS accompanied by ventricular fibrillation under general anesthesia with TAP block., Conclusion: Coronary artery spasm, even life-threatening CAS, may occur during TAP block in combination with general anesthesia.