Search

Infections caused by Staphylococcus aureus, notably methicillin‐resistant S. aureus (MRSA), pose treatment challenges due to its ability to tolerate antibiotics and develop antibiotic resistance. The former, a mechanism independent of genetic changes, allows bacteria to withstand antibiotics by altering metabolic processes. Here, a potent methylazanediyl bisacetamide derivative, MB6, is described, which selectively targets MRSA membranes over mammalian membranes without observable resistance development. Although MB6 is effective against growing MRSA cells, its antimicrobial activity against MRSA persisters is limited. Nevertheless, MB6 significantly potentiates the bactericidal activity of gentamicin against MRSA persisters by facilitating gentamicin uptake. In addition, MB6 in combination with daptomycin exhibits enhanced anti‐persister activity through mutual reinforcement of their membrane‐disrupting activities. Crucially, the "triple" combination of MB6, gentamicin, and daptomycin exhibits a marked enhancement in the killing of MRSA persisters compared to individual components or any double combinations. These findings underscore the potential of MB6 to function as a potent and selective membrane‐active antimicrobial adjuvant to enhance the efficacy of existing antibiotics against persister cells. The molecular mechanisms of MB6 elucidated in this study provide valuable insights for designing anti‐persister adjuvants and for developing new antimicrobial combination strategies to overcome the current limitations of antibiotic treatments. [ABSTRACT FROM AUTHOR]

In order to break through the bottleneck of anionic polymerization, polar monomers such as methyl methacrylate (MMA), ethyl methacrylate, butyl methacrylate, and hexyl methacrylate are subjected to anionic polymerization at room temperature in tetrahydrofuran (THF) using potassium tert‐butoxide (t‐BuOK) as the initiator. The polymerization of alkyl methacrylates is studied by multidetector gel permeation chromatography, proton nuclear magnetic resonance (1H‐NMR) and 13C‐NMR spectroscopy, and dynamic laser light scattering. It is found that t‐BuOK can initiate the living anionic polymerization of polar alkyl methacrylate, and the polymerization conversion almost reaches up to 100%. t‐BuOK exists into two kinds of agglomerates, whose hydrodynamic volumes are 10 and 80 nm, respectively. t‐BuOK in THF is similar to emulsion and has a critical active species concentration of about 0.0265 mol L−1 and does not depend on how much t‐BuOK is added. After the initiation of the polymerization, the large agglomerates of a loose and less regular structure that have occupied the main part of t‐BuOK are greatly reduced, but they do not continue to decrease until they disappear according to the equilibrium theory. Similarly, the active chain after initiation also will not aggregate again. Furthermore, t‐BuOK also has an active species with smaller average vibration size between cation and anion pairs, which can only initiate the polymerization of MMA with rather slow rate but cannot initiate other alkyl methacrylates. At last, because t‐BuOK can make the dormant species caused by side reactions to be revived, the anionic polymerization of MMA could obtain a high yield. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1130–1139 [ABSTRACT FROM AUTHOR]

The opportunistic human pathogen Staphylococcus aureus can evade antibiotics by acquiring antibiotic resistance genes or by entering into a non-growing dormant state. Moreover, the particular circumstances of a specific infection site, such as acidity or anaerobicity, often weaken antibiotic potency. Decreased bacterial susceptibility combined with diminished antibiotic potency is responsible for high failure rates when treating S. aureus infections. Here, we report that the membrane-active antimicrobial agent nTZDpa does not only exhibit enhanced antibiotic activity against multidrug-resistant Gram-positive pathogens in acidic pH, but also retains antimicrobial potency under anaerobic conditions. This agent completely eradicated highly antibiotic-tolerant cells and biofilms formed by methicillin-resistant S. aureus at pH 5.5 at concentrations at which it was not potent at pH 7.4. Furthermore, nTZDpa was more potent at synergistically potentiating gentamicin killing against antibiotic-tolerant MRSA cells at low pH than at high pH. All-atom molecular dynamics simulations combined with membrane-permeabilization assays revealed that the neutral form of nTZDpa, which contains carboxylic acid, is more effective than the deprotonated form at penetrating the bacterial membrane and plays an essential role in membrane activity. An acidic pH increases the proportion of the neutrally charged nTZDpa, which results in antimicrobial enhancement. Our results provide key insights into rational design of pH-sensitive membrane-active antimicrobials and antibiotic adjuvants that are effective in an infection environment. These findings demonstrate that nTZDpa is a promising lead compound for developing new therapeutics against hard-to-cure infections caused by drug-resistant and -tolerant S. aureus. • Membrane-active nTZDpa shows enhanced antimicrobial activity in acidic conditions. • nTZDpa exhibits enhanced killing of antibiotic-tolerant persister cells at low pH. • Non-ionized neutral nTZDpa penetrates and embeds into bacterial lipid bilayers. • The proportion of neutral nTZDpa increases as pH decreases. • The antimicrobial synergism of nTZDpa plus gentamicin is enhanced at low pH. [ABSTRACT FROM AUTHOR]

Using potassium tert‐butoxide (t‐BuOK) as initiator, anionic polymerization and copolymerization of the methacrylate monomers are carried out in tetrahydrofuran at 0 °C or above. The polymers are characterized by gel permeation chromatography (GPC), proton nuclear magnetic resonance (1H‐NMR), Fourier transform infrared (FTIR), and dynamic mechanical analyzer (DMA). There is a critical concentration of the active species in t‐BuOK, above which no matter how much more t‐BuOK is added, it has no initiation activity. Among the active species of t‐BuOK, the main part possesses large average vibration distance between anion–cation pairs, which can initiate all methacrylate monomers in this study. While another part of the active species possesses the small average vibration distance, which can only initiate the polymerization of methyl methacrylate at slow rate. It provides an supporting evidence for the "channel idea" proposed previously. Finally, poly(methyl methacrylate)‐b‐poly(lauryl methacrylate)‐b‐poly(methyl methacrylate) (PMMA‐b‐PLMA‐b‐PMMA) three‐block copolymer is synthesized. This study paves the way for the synthesis of thermoplastic elastomers with full polar monomers and full saturated chains by anionic polymerization. [ABSTRACT FROM AUTHOR]

Abstract: It still remains a concern to break through the bottlenecks of anionic polymerization of polar monomers, such as side reactions, low conversion and low temperature (–78°C). In this work, potassium tert‐butoxide (t‐BuOK) was chosen to initiate the anionic polymerization of 2‐ethylhexyl methacrylate (EHMA) in tetrahydrofuran. The conversions were above 99% at 0 or 30°C, and above 95% at 60°C without side reaction inhibitors. The high conversions implied t‐BuOK could suppress the side reactions. A series of block copolymers of EHMA, n‐hexyl methacrylate (HMA) and methyl methacrylate (MMA) were further synthesized at 0°C, and the conversions were all above 99%. The GPC and 1H NMR results confirmed the successful synthesis of the block copolymers. The molecular size of monomer and the state of t‐BuOK (free ion pairs or aggregates) remarkably affected the polymerization rates and the molecular structures of the products. The DMA results indicated that the glass transition temperatures of PEHMA or PHMA block and PMMA block were 20°C and 60°C, respectively, which deviated from –2°C and 105°C of homopolymer, respectively, due to the partial compatibility of the blocks. This work explored a route of the anionic polymerization of polar monomers at room temperature. [ABSTRACT FROM AUTHOR]

A fundamental understanding of cell shaping with confined flexible filaments, including microtubules, actin filaments, and engineered nanotubes, has been limited by the complex interplay between the cell membrane and encapsulated filaments. Here, combining theoretical modeling and molecular dynamics simulations, we investigate the packing of an open or closed filament inside a vesicle. Depending on the relative stiffness and size of the filament to the vesicle as well as the osmotic pressure, the vesicle could evolve from an axisymmetric configuration to a general configuration with a maximum of three reflection planes, and the filament could bend in or out of plane or even coil up. A plethora of system morphologies are determined. Morphological phase diagrams predicting conditions of shape and symmetry transitions are established. Organization of actin filaments or bundles, microtubules, and nanotube rings inside vesicles, liposomes, or cells are discussed. Our results provide a theoretical basis to understand cell shaping and cellular stability and to help guide the development and design of artificial cells and biohybrid microrobots.

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.

Tough natural materials such as nacre, bone, and silk exhibit multiscale hierarchical structures where distinct toughening mechanisms occur at each level of the hierarchy, ranging from molecular uncoiling to microscale fibrillar sliding to macroscale crack deflection. An open question is whether and how the multiscale design motifs of natural materials can be translated to the development of next-generation biomimetic hydrogels. To address this challenge, we fabricate strong and tough hydrogel with architected multiscale hierarchical structures using a freeze-casting-assisted solution substitution strategy. The underlying multiscale multimechanisms are attributed to the gel's hierarchical structures, including microscale anisotropic honeycomb-structured fiber walls and matrix, with a modulus of 8.96 and 0.73 MPa, respectively; hydrogen bond-enhanced fibers with nanocrystalline domains; and cross-linked strong polyvinyl alcohol chains with chain-connecting ionic bonds. This study establishes a blueprint of structure-performance mechanisms in tough hierarchically structured hydrogels and can inspire advanced design strategies for other promising hierarchical materials.

Resistance or tolerance to traditional antibiotics is a challenging issue in antimicrobial chemotherapy. Moreover, traditional bactericidal antibiotics kill only actively growing bacterial cells, whereas nongrowing metabolically inactive cells are tolerant to and therefore "persist" in the presence of legacy antibiotics. Here, we report that the diarylurea derivative PQ401, previously characterized as an inhibitor of the insulin-like growth factor I receptor, kills both antibiotic-resistant and nongrowing antibiotic-tolerant methicillin-resistant Staphylococcus aureus (MRSA) by lipid bilayer disruption. PQ401 showed several beneficial properties as an antimicrobial lead compound, including rapid killing kinetics, low probability for resistance development, high selectivity to bacterial membranes compared to mammalian membranes, and synergism with gentamicin. In contrast to well-studied membrane-disrupting cationic antimicrobial low-molecular-weight compounds and peptides, molecular dynamic simulations supported by efficacy data demonstrate that the neutral form of PQ401 penetrates and subsequently embeds into bacterial lipid bilayers more effectively than the cationic form. Lastly, PQ401 showed efficacy in both the Caenorhabditis elegans and Galleria mellonella models of MRSA infection. These data suggest that PQ401 may be a lead candidate for repurposing as a membrane-active antimicrobial and has potential for further development as a human antibacterial therapeutic for difficult-to-treat infections caused by both drug-resistant and -tolerant S. aureus IMPORTANCE Membrane-damaging antimicrobial agents have great potential to treat multidrug-resistant or multidrug-tolerant bacteria against which conventional antibiotics are not effective. However, their therapeutic applications are often hampered due to their low selectivity to bacterial over mammalian membranes or their potential for cross-resistance to a broad spectrum of cationic membrane-active antimicrobial agents. We discovered that the diarylurea derivative compound PQ401 has antimicrobial potency against multidrug-resistant and multidrug-tolerant Staphylococcus aureus PQ401 selectively disrupts bacterial membrane lipid bilayers in comparison to mammalian membranes. Unlike cationic membrane-active antimicrobials, the neutral form of PQ401 rather than its cationic form exhibits maximum membrane activity. Overall, our results demonstrate that PQ401 could be a promising lead compound that overcomes the current limitations of membrane selectivity and cross-resistance. Also, this work provides deeper insight into the design and development of new noncharged membrane-targeting therapeutics to combat hard-to-cure bacterial infections., (Copyright © 2020 Kim et al.)

Flexible and transparent power sources are highly desirable in realizing next-generation all-in-one bendable, implantable, and wearable electronic systems. The developed power sources are either flexible but opaque or semitransparent but lack of flexibility. Therefore, there is increasing recognition of the need for a new concept of electrochemical device structure design that allows both high flexibility and transparency. In this paper, we present a new concept for electrochemical device design--a two-dimensional planar comb-teeth architecture on PET substrate--to achieve both high mechanical flexibility and light transparency. Two types of prototypes--dye-sensitized solar cells and supercapacitors--have been fabricated as planar devices and demonstrated excellent device performance, such as good light transparency, excellent flexibility, outstanding multiple large bending tolerance, light weight, effective prevention of short circuits during bending, and high device integration with up-date microelectronics, compared to conventional sandwich structure devices. Our planar design provides an attractive strategy toward the development of flexible, semitransparent electrochemical devices for fully all-in-one elegant and wearable energy management.