Search

Background: The impact of treatments on completely edentulous individuals on masticatory performance (MP), oral health‐related quality of life (OHRQoL), nutritional status (NS) and socio‐economic profile (SP) is unclear in the literature. Objective: To compare the MP, OHRQoL, NS and SP of totally edentulous elderly users of bimaxillary complete dentures (CD) and users of lower implant‐supported fixed complete dentures (IFCD). Methods: Forty participants were allocated into groups according to rehabilitation treatment (n = 20): bimaxillary CD (G1) and lower IFCD, and upper CD (G2). The evaluation of MP used almonds by the method of sieves. Four questionnaires (Geriatric Oral Health Assessment Index–GOHAI and Oral Health Impact Profile Edent–OHIP‐Edent, Brazilian Economic Classification Criteria–ABEP and Mini Nutritional Assessment‐MNA) were applied to assess the OHRQoL, SP and NS of the elderly, respectively. After evaluating the statistical assumptions, the Mann–Whitney (α =.05) test was applied to compare the groups regarding MP, OHRQoL, NS and SP. Spearman's correlation (α =.05) was performed to verify the correlation between the MP, the OHRQoL and the NS of the participants. Results: G2 showed better MP (p <.05) in all masticatory cycles, OHRQoL (p <.05) and NS than the G1. However, the participants' self‐perception of oral health did not differ between groups (p <.05). A moderate negative correlation was found between MP and OHRQoL for 40 masticatory cycles (r2 = −0.513; p =.001). Conclusion: Individuals rehabilitated with IFCD had a higher average monthly family income and achieved superior behaviour in MP and OHRQoL, in addition to lower risks of malnutrition when compared to individuals using bimaxillary CD. [ABSTRACT FROM AUTHOR]

Background: The literature is unclear about bite force (BF) and handgrip force (HF) in a specific group of different ages and dentate conditions, or even a predictive model for each specific group, using BF and HF as factors. Objective: To establish the correlation between HF and BF in female participants with distinct ages and dentate conditions; also create a predictive model of BF as a function of HF. Methods: Participants were divided into three groups (GI: young natural dentate women, n = 65; GII: adult natural dentate women, n = 67; and GIII: edentulous women users of bimaxillary complete dentures, n = 67) and subjected to an HF measurement test using a digital dynamometer. Subsequently, BF was measured using a digital gnathodynamometer in the molar region. Pearson correlation coefficient (r) and multivariate analysis of variance (α = 0.05) were performed, and simple linear regression was used to obtain a model to predict BF from HF for each group separately (α = 0.05). Results: All groups presented moderate and strong correlations among the variables (GI: r = 0.838; GII: r = 0.714; GIII: r = 0.646). A significant difference in BF was observed (GI > GII > GIII; p <.05). GIII presented a significantly lower HF than the other groups (p <.05). Besides, three equations predicting BF, using HF, were obtained for use in young/adult dentate and edentulous women. Conclusion: All groups found a positive and significant correlation between BF, HF and groups. HF can be a simple and efficient method for predicting BF using the predictive models developed for women with good health. [ABSTRACT FROM AUTHOR]

Aim: To analyze the accuracy of extraoral systems (Ceramill Map400+, AutoScan-DS200+, and E2) in full implantprosthetic rehabilitation three-dimensionally. Methods: A metallic edentulous maxilla with four implants was digitalized by a contact scanner (MDX-40 - Roland, control) and used as a control image to compare with other images generated by three laboratory scanners (10 samples per group). Letters identified all the four components: A and D angled 45º, and B and C parallel. The BioCAD software exported the images (.STL) to compare and verify deviations of the analogs on the X, Y, and Z axes. The nonparametric Kruskal-Wallis test and the two-way ANOVA on ranks with a post hoc Tukey test analyzed the data with 5% significance. Results: No statistical differences were observed in the accuracy between the extraoral scanners (p=0.0806). However, when analyzing only the components, component D was more accurate when scanned with Ceramill Map400+ compared with AutoScan DS200+ (p<0.001) and with E2 (p=0.002). Conclusions: All extraoral systems assessed showed digitalization accuracy but with more deviations in angled implants. The Ceramill Map400+ scanner showed the best results for the digital impression of a complete arch. [ABSTRACT FROM AUTHOR]

Copyright of Universidade Estadual Paulista. Revista de Odontologia is the property of Universidade Estadual Paulista. Revista de Odontologia and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: The literature is unclear about how the different attachment systems for overdentures impact the maximum bite force, the masticatory efficiency and how this impact in the oral health self-perception in patients., Objective: To evaluate the effect of two attachment systems (O-ring and Locator) for mandibular overdenture using single implant on quality of life, maximum bite force (BF) and masticatory efficiency (ME)., Methods: Twenty-eight completely edentulous denture wearers with a mandibular symphysis implant were randomly selected and allocated into two groups in a crossover study, considering O-ring and Locator attachment types. The quality of life and self-perception of oral health were assessed using the Oral Health Impact Profile (OHIP-Edent) and Geriatric Index of Determination of Oral Health (GOHAI) questionnaires, respectively. BF was measured using a gnathodynamometer and ME by chewing silicone cubes and almonds in different numbers of cycles., Results: There was no difference between the attachment systems about self-perceived oral health and impact on quality of life (p > .05). The O-ring-type system obtained a significantly higher BF than the locator-type system (p = .04). Regardless of the food chewed, no statistically significant difference was observed with the type of attachment (p > .05). The ME was directly proportional to the masticatory cycles only for almonds (p < .01)., Conclusions: Locator and O-ring inserts had a similar impact on patients' quality of life, self-perception of oral health and ME. Additionally, the O-ring system exhibited superior properties in the BF., (© 2024 John Wiley & Sons Ltd.)

Purpose: The purpose of this study was to evaluate in vitro the accuracy of different splinting techniques using transfers combined with different tray types., Materials and Methods: The research group fabricated a maxillary master cast with four implants and a passive metallic bar on this master cast. For the impression techniques, 48 casts were used with six different impression techniques: (1) metal tray with resin splinted transfers, (2) metal tray with metal and resin splinted transfers, (3) plastic tray with resin splinted transfers, (4) plastic tray with metal and resin splinted transfers, (5) multifunctional guide with resin splinted transfers, and (6) multifunctional guide with metal and resin splinted transfers (n = 8) using polyvinyl siloxane impression material. This study used a passive metallic bar to measure the malalignment between the framework and the analogs (A, B, C, and D) in 2D and 3D. The master and experimental casts were scanned with a contact scanner to compare the accuracy in 3D impression techniques. Discrepancies between the analogs were measured in three x-, y-, and z-axes., Results: There was no statistically significant difference (P > .05) between the groups in vertical malalignments (2D). In the 3D evaluation, for the z-axis and combination of xz-axis, plastic tray with metal, and resin splinted transfers (z = 487 μm; xz = 888 μm), there was a statistically significant difference compared with the multifunctional guide and resin splinted transfers (z = 772 μm; xz = 1,380 μm). When analyzing by analog, in C, the multifunctional guide with metal and resin splinted transfers (302 μm) presented a statistically significant difference compared with the multifunctional guide and resin splinted transfers (492 μm)., Conclusion: The evaluation methods for the accuracy impression technique presented different results between them. There was no difference in vertical malalignments (2D), but in 3D, the bonding with metal and acrylic resin presented better results than the bond with only acrylic resin when using the plastic tray and multifunctional guide, respectively, in the z-axis and the combination between the xz-axes. The bonding technique of the transfers with metal and acrylic resin presents better results in the 3D analysis for the multifunctional guide impressions.