Search

Building a clean, low-carbon, safe and efficient energy system is an overall requirement for the modernization of the energy system, The nitrogen oxides produced by the combustion of fossil fuels need to be effectively treated. The selective non-catalytic reduction denitrification (SNCR) technology in the thermal power industry. It is widely used due to its low cost and mature technology. By using CFD software to simulate and study the coupling of flue gas temperature field and NO concentration field, the SNCR nozzle was set up to study the impact on denitrification efficiency. Simulate multiple layout methods, including sequential arrangement, staggered arrangement, concentrated in the middle and concentrated on both sides. The denitrification efficiency is highest among them, which is concentrated on both sides and further optimized through the NO concentration field in the furnace. After optimization, the denitrification efficiency reached 59.2%, which was 2.4% higher than the traditional uniform layout method. It has important practical guidance significance for energy conservation, emission reduction, and operational optimization.

The influence of pulverized coal particle size on combustion and NOx formation of 660MW tangential combustion ultra-supercritical boiler in a power plant was studied by using commercial software FLUENT. The average particle size of pulverized coal was set at 61μm, 71μm and 80μm, respectively. The results show that with the decrease of pulverized coal particle size, the overall temperature level of the boiler increases, the average temperature of the main combustion zone increases, the temperature of the upper part of the main combustion zone decreases, and the combustion of pulverized coal is more incomplete. However, the probability of particles sticking to the wall and the probability of coking and slagging of the boiler increases. The amount of NOx produced in the main combustion zone decreases, while the amount of NOx produced in the upper part of the main combustion zone increases, while the overall amount of NOx produced increases slightly.