Search

The objective of the study is to treat industrial wastewater and perform a thermodynamic experimental study for more economical and efficient adsorption process. This has been done by biosorption and chemisorption of chromium ions from synthetic wastewater into already prepared pomegranate peel as a natural adsorbent. Pomegranate peel proved to be an economic solution since it is available locally and it has an elevated adsorption capacity. Adsorption has been done in a fixed bed column (10 cm inside diameter, and 30 cm height) with continuous flow rate of 1 ml/min. The characteristic properties of adsorption for the pomegranate peel, analyzed by FTIR and SEM, proved that pomegranate peel is a good adsorbent because of its effective combinations and holes on its exterior. Also, comparing between adsorption ability of pomegranate peel together with Langmuir and Freundlich models indicates that Langmuir is preferable in fitting the experimental data. However, the elimination efficiency of the pomegranate peel was 90%, and the greatest adsorption capability was 9.45 mg/g. While, thermodynamic study results showed that endothermic adsorption was approved from positive values of ΔH°, also the negative values of ΔG° proved that the adsorption is unprompted and convenient.

Finite element analysis for piezoelectric actuator has been developed in Ansys Software which are a program that can analyses and simulate the dynamic behaviour of piezoelectric. The Ultrasonic Vibration assisted Milling (UVAM) experimental having a difficulty to investigate the effect of vibration mechanism where existence of error in material, mechanism and attachment of piezoelectric thus affect the amplitude and frequency of mechanical compliance during the machining of UVAM. This paper will investigate the modelling of piezoelectric compliance and follow the procedures of FEA to accurately predict the dynamic behaviour of compliance. The parameters for simulation of piezoelectric are voltage, electromechanical coupling and frequency. The compliance mechanism is model by using SolidWorks 2014 and imported to Ansys Mechanical APDL Software were the piezoelectric are embedded on the mechanism. Modal analysis and harmonic analysis has been used in order to obtain the mode shape and displacement. The displacement of the compliance mechanism will be compare between simulation and experimental. The dynamic behaviour was discussed in simulation to study the reliability of the compliance mechanism before it safely used in UVAM.