Search

Purpose of the Study: The aim of this study was to determine the predictive value of the traction radiograph in adults with stiff curve (preoperative Cobb angle>60 degrees and reduction of less than 35% with traction) thoracic scoliosis. We wanted to compare this predictive value with that observed in reducible scoliosis., Material and Methods: A traction radiograph was obtained using a standard protocol with dynamometric control of the force applied. Patients with stiff scoliosis had 47 thoracic curves and 11 thoracolumbar curves (with primary anterior release for ten thoracic curves and eight thoracolumbar curves) and patients with reducible scoliosis had 56 thoracic curves. Cortre-Dubousset instrumentation was used for treatment in all patients., Results: The postoperative Cobb angle for the stiff curves (without anterior release) was strongly correlated with the preoperative angle with traction (r=0.91; p<0.0001). The correlation between the postoperative Cobb angle and the preoperative Cobb angle without traction was less pronounced (r=0.86; p<0.0001). The traction radiographs were less predictive of the Cobb angle correction than the postoperative Cobb angle. The difference was 17.5+/-7 degrees , which corresponds to a supplementary gain in reduction after surgery. For the thoracic curves alone, the differences between the traction Cobb angle and the postoperative Cobb angle was 14.5 degrees for stiff curves and 6.5 degrees for reducible curves. Furthermore, the correlation between the Cobb angle with traction and the postoperative Cobb angle was stronger for stiff curve thoracic scoliosis (r=0.90) than reducible thoracic scoliosis (r=0.78)., Discussion and Conclusion: The standard traction radiographs were highly predictive of postoperative reduction of stiff thoracic and thoracolumbar curves treated by segmental instrumentation. The postoperative result can thus be estimated with a margin of error of +/-7 degrees . For the stiff curves, the postoperative Cobb angle was 17.5 degrees on average less than predicted on the traction radiograph (on average 20% supplementary gain in reduction). This angle gain, which was greater for stiff than reducible curves, corresponds to the determining effect of release occurring with stiff curves. Finally, because of the stronger correlation between the traction Cobb angle and the postoperative Cobb angle for stiff curves, the predictive value of the traction radiograph is greater for stiff curves than for reducible curves. In conclusion, one of the contributions of the traction radiograph, which results from the predictability of the postoperative angle with a small margin of error, is to enable adequate prediction of the postoperative outcome for a given patient or a specific sub-group of patients, e.g. with or without anterior release.

Purpose of the Study: Bone grafts or bone substitutes are required to fill bone defects resulting from trauma or surgical resection of tumors. Calcium-phosphate ceramics are synthetic bone substitutes which promote new bone formation by osteoconduction. These ceramics possess osteoconductive properties but have no intrinsic osteoinductive capacity. They are unable to induce new bone formation in extraossesous sites. One solution to develop bone substitutes with osteogenic properties would be to associate biomaterials with osteoprogenitors., Materials and Methods: We studied the in vitro osteogenic potential of human bone-marrow cells cultured on macroporous calcium phosphate (CaP) ceramic, examining stromal cell proliferation and differentiation. Osteogenic differentiation was evaluated in terms of alkaline phosphatase activity and immunological characterization of the extracellular fibrillar matrix formed by these cells. The specimens were examined by scanning and transmission electron microscopy., Results: Human bone-marrow cells proliferated on CaP ceramic. The proliferating bone-marrow cells expressed an osteoblastic phenotype as shown by alkaline phosphatase activity and synthesis in ceramic pores of an extracellular matrix composed of fibronectin, osteocalcin and collagen I. In addition, numerous microcrystals of apatite precipitated on the fibrillar matrix, producing a mineralized fibrillar network within the ceramic., Conclusion: This study demonstrates that human bone-marrow cells cultured on macroporous CaP ceramic do not lose their osteoblastic phenotype even after 21 days of culture, and that they can induce osteogenesis in a CaP ceramic in vitro. This type of new "hybrid material" appears promising for the future.

Introduction: We report a retrospective analysis of spinal cord monitoring with neurogenic mixed evoked potentials (NMEPs) combined with somatosensory evoked potentials (SSEPs) in 149 patients undergoing surgery for spinal deformity., Material and Methods: 149 patients (104 females and 45 males), mean age 28 yrs (13-72 yrs) were studied. NMEPs were elicited by electrical spinal cord stimulation in the rostral part of the surgical field, via two needle electrodes set in the epidural space and in the interspinous ligament above. They were recorded from the sciatic nerve at the knee and the sural nerve at the ankle. SSEPs were recorded from the scalp after stimulation of the posterior tibial nerve at the ankle. A decrease in amplitude of more than 50 p. 100 and/or an increase in latency of more than 10 p. 100 were defined as significant warning criteria., Results: No false-negative result was observed. NMEP modifications did not reach critical value in 143 cases. In 6 cases, significant changes were observed. Moving the stimulation electrodes along the spinal cord allowed spinal lesion localization and helped the surgeon to perform the adapted maneuver, clearly avoiding the occurrence of postoperative neurological defect in 5 of the 6 cases., Conclusion: NMEP monitoring is a sensitive and specific method useful for detecting an impending lesion of the spinal cord. NMEPs are also helpful in localizing the spinal level of the lesion. They represent a primary choice tool for neuromonitoring during scoliosis surgery.

Purpose of the Study: The authors report their experience with the use of a biphasic macroporous calcium phosphate bone substitute., Materials and Methods: In 23 cases (22 patients) a biphasic macroporous calcium phosphate ceramic was used to fill a pathological bone defect. The ceramic used in this study was a macroporous (400 to 600 mu) component consisting of 60 per cent hydroxyapatite and 40 per cent beta-tricalcium phosphate. It was in the form of granules (2 to 3 mm), sticks (20 x 5 x 5 or 10 x 5 x 5 mm) or custom made blocks. In 6 cases, the ceramic was used alone; in 12 cases with autologous bone marrow and in 5 cases with autologous cancellous bone grafts. In 14 cases, the bone defect was due to conservative treatment of a benign tumor, in 3 cases due to aseptic post-traumatic non union, in 3 cases due to wide resection for malignant tumors of the pelvis and in 3 cases following osteotomy. Post operative assessment was made from clinical, radiographic and histological findings., Results: 2 patients died 6 and 8 months post operatively and 2 were lost to follow up at 2 and 5 months with both having good clinical and radiographic results when last seen. For the remaining 19 cases, the average follow-up was 20 months (from 6 to 62 months). No local, regional or general deleterious effects were noted. Radiologically the bone ceramic junction healed in all cases except 2 within 3 months. In these last two cases, healing required 6 and 7 months. No radiolucent line appeared around the ceramic. No stress fractures occurred in the substitute. Histologically, 3 biopsies showed new bone formation throughout the ceramic with apposition of a well differentiated lamellar bone directly apposed to the ceramic., Discussion: Animal experimentations have proven the interest of similar ceramics: macroporosity enhances bone rehabilitation and the biphasic characteristics associate the advantages of slow resorption of hydroxyapatite and more easily resorbed beta-calcium phosphate. No deleterious clinical, radiographical or histological effects were observed, confirming the biocompatibility of this substitute. Despite the poor mechanical properties of this macroporous ceramic before implantation, good clinical and radiographic results suggest improvement of these properties in the composite new formed bone-ceramic after implantation., Conclusion: We believe that macroporous biphasic ceramic is a good substitute for use in bone defects when good primary mechanical stability and contact with the host bone are present. Further clinical and experimental studies are necessary to determine the limits of such a substitute in terms of volume and to control its mechanical properties following implantation.

We emphasize the opportunity of an in vivo bone mass measurement with an easy and accurate technique for orthopedic practice. At the present time, Dual Energy X Ray Absorptiometry (DEXA) is the most used technique, and is a safe and short examination. It can assess the quantity of mineral of any region of the body with a remarkable reproducibility (1 to 3 per cent). New machines are improved, and they permit many practical applications beyond the osteoporosis field. Thus, in orthopedics, we can distinguish several interesting topics. Peripheral risk of fracture can be evaluated because of good correlation between bone mineral content and biomechanical properties of bone. Even if a peripheral fracture occurs after a fall, low bone mineral density plays an important role, as in the case of femoral neck fractures in elderly patients. In traumatological practice, a DEXA with a specialized advice has to be requested if the traumatism cannot fully explain the occurrence of the peripheral fracture. Low bone mineral density defines an osteoporotic state, with the possibility of selecting adequate therapy. The good reproducibility of the measurement allows early estimation of bone loss following a period of immobilization. Varying models of osteosynthesis can be compared in vivo, to evaluate a decrease of "stress shielding" bone resorption. The role of stiffness of an implant on regional bone mineral content can be assessed. Likewise, periprosthetic bone mineral content can be measured in various regions, and followed over time. Specific software allows the exclusion of the region where the metallic prosthesis is projected. The reproducibility of this peripheral bone mineral content is 2 to 3 per cent, which individually allows an estimation of variations of more than 5 per cent. It will be possible to evaluate in vivo the influence of various parameters of the prosthesis on bone mineral content in controlled studies, such as the role of the shape, the position, the structure, the coating. Mineral content of biomaterials and bone grafts are taken into account. Focusing the X Ray beam allows ultrahigh resolution. Precise measurements of very small parts of bone such as rodent tibia or vertebra are possible. The good reproducibility (2 per cent) authorizes the evaluation of various parameters which modify bone remodeling, such as immobilization or activity, ovariectomy. Preventive or curative therapeutics which change bone mass can be evaluated in animal pre clinical studies. There are other methods of measurement of bone mineral content. Digitalization of radiographs is not sufficiently accurate and CT Scan generate high levels of radiation. The DEXA is actually the best compromise for an accurate and reproducible measurement of the bone mineral content in vivo. This method will certainly be an important tool in orthopedics for several clinical or animal investigations in the future.