Search

Despite being widely used in several applications, commercially available spool valves, both servovalves and proportional valves, are inefficient components because they cause high power consumption due to the large pressure drops across the metering orifices. A recent research field aims at substituting spool valves with on/off valves having high switching frequency (changing state between open and closed in a few milliseconds or less) and producing low pressure drops, in order to make the so-called digital hydraulics possible. In spite of the advantages that it could provide, digital hydraulics does not have significative industrial applications yet, because of the difficulty in manufacturing such high frequency on/off valves. Hence, this paper performs a feasibility study of an on/off poppet-type valve actuated directly by a commercially available ring stack, which is a multilayer piezo-actuator capable of generating very high actuation forces needed for this application. Modulation of the average flow can be achieved by changing the duty cycle of the pulse width modulation (PWM) signal driving the piezostack. An inertance tube could also be used to smooth flow pulsation. The simulations obtained using a detailed Simulink model show that high switching frequency and very effective flow modulation can be obtained with this valve architecture along with low pressure drops and high flow rates, thus making it potentially suitable for digital hydraulics. The disadvantages of this single stage architecture are the large dimensions of the piezo stacks, and the high current generated because of both the high capacitance of the piezo stack and the high frequency switching. However, large-scale production of these components could help to reduce the costs, and the simulations show that limiting the maximum current to 10 A still provides good regulation.

In this paper, we investigate the idea of using, in place of recent linear force motors, amplified piezo-stack actuators for the actuation of direct drive servovalves, in order to exploit the fast response of piezoelements accompanied by the increased displacement ensured by mechanical amplification systems. Some possible architectures are proposed in this paper for the direct actuation of four-way three-position (4/3) servovalves using one or two commercially available amplified piezo-stack actuators having a diamond amplification mechanism. The simplest architecture, which employs only one actuator, is assessed using wellestablished equations implemented in Simulink, allowing the hydraulic, mechanical and electrical parts of the valve to be accurately simulated. Three spools of different size are considered in the simulations in order to obtain performance predictions for different valve flow ratings. From the analysis of the inherent characteristics of the amplified piezo-stack and from the results of the simulations, advantages and disadvantages of this possible architecture are drawn and discussed in detail. Among the advantages, there are the simplicity of construction and the high potential in terms of step response speed and frequency response; the large dimensions, low chip shear force capability and high costs are the main disadvantages.

This paper proposes a modelling approach for simulating mechanical ventilators for intensive care units (ICUs). The shortage of ventilators during the coronavirus disease 2019 (COVID-19) pandemic has focused attention on their design and performance. The proposed modelling approach consists in using the Mathworks® Simulink software tool and the SimScape Fluids (gas) library, so as to use well-established subroutines to simulate all the pneumatic components of typical ventilators for ICUs, such as the pressure reducing valves, pressure relief valves, check valves, tanks, ON\OFF and proportional directional valves, etc. The patient is simulated by setting the values of lung compliance and pressure losses occurring in the trachea. The proposed modelling approach is used in this paper to simulate a pneumatic scheme employed in some commercial ventilators. The model allows a very accurate prediction of fundamental parameters, such as the inspiratory flow rate, the inspiratory pressure, the end-expiratory pressure. Since the software interface is user-friendly, it can easily be used by manufacturers to correctly choose the geometrical and operating parameters of the components during the design stage or to assess different scenarios.