Search

Renewable energy resources and electric vehicles give pressure on the smart grid. Once a large number of electric vehicles do batch charging at peak time, the dynamic resource allocation ability of the smart grid appears to be very important. This article proposes one composite game model to describe the interaction process during the charging. The smart grid area covers numbers of charging stations which satisfy spatial non-equilibrium distribution. Each vehicle has enough remaining energy to reach each charging station in the considering field. This paper considers preferential policies to the cost-sensitive drivers. From the view of energy management, preferential policies from charging stations will fluctuate the energy demand. To do dynamic dispatching strategy in power supply, the model describe two type of interactions, one is between stations and vehicles, the other is between vehicles. The model help strategy managers understand more about energy demand which hopefully can assist them do reasonable dynamic dispatching strategy.

As the focus of power companies such as State Grid Corporation of China, electricity sales forecasting is closely related to the development of enterprises and the country. The importance of accurate electricity sales forecasting in the context of electricity reform has become more and more prominent. The article takes electricity sales in Hunan Province as the research object, and constructs a more complete monthly electricity sales forecasting system based on the decomposition-integration idea, correlating electricity sales impact factors, and combining quantitative and qualitative analyses by categories. The prediction results show that the electricity sales forecasting model proposed in this paper has a high prediction accuracy under the existing data capacity level.

To determine the effect of different harvesting time on antioxidant capacity in Jerusalem artichoke polysaccharides (inulin), the Jerusalem artichoke before and after overwintering were collected from the same region, and then evaluate their antioxidant capacity in vitro by reducing power assay, DPPH radical-scavenging assay and hydroxyl radical-scavenging assay. Ascorbic acid at similar mass concentration was served as positive control. The results showed no significant difference were observed in reducing power when the absorbance values were about 0.3. When the mass concentrations before and after overwintering were 0.9 mg/mL and 1.7 mg/mL, the DPPH radical-scavenging rate both reached at 50%. And when the mass concentrations were both 10 mg/mL, the hydroxyl radical-scavengings were 35.8% and 27.9%, respectively. Thus, it could be concluded that the antioxidant capacity in Jerusalem artichoke polysaccharides before overwintering was higher than that after overwintering, and showed a good dose-dependent manner with its mass concentration.

Excellent corrosion resistance has made titanium a preferred material for use in industry with harsh environments. Protective titanium coatings combined with cheap bulk materials are expected to enable sufficient corrosion protection and lower the cost. Plasma spray processing of titanium feedstock becomes a challenging topic of research as titanium powder particles have to experience high temperatures in the flight during the thermal spraying process in an open air environment. In this paper, plasma spraying of titanium has been carried out by using a shroud in order to shield molten particles from reacting with surrounding environment. Microstructure analyses on the titanium coatings were performed by using SEM, EDS and XRD. The results show that the shroud attachment is capable of withstanding high plasma temperatures; the as-sprayed shrouded titanium coating exhibits a similar phase composition as the pure titanium powder, and an enhanced microstructure with a lower porosity for the titanium coating plasma-sprayed with a shrouding system is observed.

Excellent corrosion resistance has made titanium a preferred material for use in industry with harsh environments. Protective titanium coatings combined with cheap bulk materials are expected to enable sufficient corrosion protection and lower the cost. Plasma spray processing of titanium feedstock becomes a challenging topic of research as titanium powder particles have to experience high temperatures in the flight during the thermal spraying process in an open air environment. In this paper, plasma spraying of titanium has been carried out by using a shroud in order to shield molten particles from reacting with surrounding environment. Microstructure analyses on the titanium coatings were performed by using SEM, EDS and XRD. The results show that the shroud attachment is capable of withstanding high plasma temperatures; the as-sprayed shrouded titanium coating exhibits a similar phase composition as the pure titanium powder, and an enhanced microstructure with a lower porosity for the titanium coating plasma-sprayed with a shrouding system is observed.

The present study aims at investigating the cyclic flexural behavior of reinforced concrete beams with varying depths. Five reinforced concrete beams with beam depth ranging from 250 mm to 750 mm were tested under reversed cyclic loading and the influence of beam depth on the flexural strength and ductility of reinforced concrete beams was investigated. In addition, OpenSees was used to model the test specimens and the analytical results were compared with the experimental reuslts. It is shown that there is no apparent size effect on the normalized ultimate flexural strength of the tested beams, while for the displacement ductility factor, a significant size effect is observed. Load-deflection hysteric curves of test specimens obtained by the fiber-based element of OpenSees with Concrete03 and Hysteric models are in good agreement with those from experimental tests.

This study aimed to explore the effect of treadmill exercise on anxiety in rats. Thirty SPF male rats aged 2 months with a body mass of (225±25) g were randomly divided into control group (CG, n=10), chronic sleep deprivation group (CSD, n=10) and sleep deprivation exercise group (CSD+E, n=10) after adaptive feeding for 1 week. The CSD model of rats in CSD group and CSD+E group was made by multi platform water environment method. Sleep deprivation of 18 h per day (from 12:00 pm. to 6:00 am. the next day) for 8 weeks. The effect of running on the anxiety-like behaviour of CSD rats was examined in the open field test (OFT) and the elevated plus maze (EPM) experiment. Hematoxylin-eosin (HE) staining, Annexin V/PI flow cytometry, immunofluorescence staining, Western blot, RT-qPCR and other methods were used to detect the effects of treadmill exercise on the morphology of hippocampus, apoptosis related factors caspase-12, Bax, Bcl-1, inflammatory factors (IL-6, TNF-a), Wnt β- catenin, p- β-catenin. The results of HE staining showed that the brain tissue of the control rats was structurally intact, with thick layers of cone cells, relatively dense, neatly arranged and compact, the cell edge structures were intact and clearly visible, with no obvious abnormal changes. The cone cell layer of brain tissue in the chronic sleep deprivation group was thin, with relatively low cell density, disorganized and sparse arrangement, and blurred cell edges. The symptoms of the above pathological changes in brain tissue of rats in sleep deprivation exercise group gradually alleviated. OFT results showed that compared with CG group, the number of activities in the central region of CSD group was significantly reduced (P

With the improvement of China’s international status, the international dissemination of Chinese red culture is facing some big problems such as inaccurate language expression, inadequate cultural connotation, and insufficient communication paths, which has seriously limited the nation’s foreign discourse ability. Therefore, in order to bring China’s excellent culture and red tourism brands to the world and meet the strategic requirement of high-quality development in China, it puts forward some detailed and feasible strategies to improve the ability of sharing Chinese stories better by strengthening the language translation ability, to ensure the inherent needs of the cultural field by shortening cultural differences, and to expand publicity channels by establishing multi-lateral cooperation mechanism.

For the design of sustainable buildings, it is crucial with accurate methods to evaluate how alternative constructions will influence thermal comfort, as well as energy efficiency. This study introduces a model to investigate how the use of phase change materials (PCM)in building envelopes can influence the temperature stratification, which also influences the indoor thermal comfort. PCM is characterized by large latent heat in the melting/solidifying process during phase transition. Applications with PCM have been recognized as possible alternatives in building envelopes to improve thermal comfort as well as energy efficiency. The selection of the properties of the PCM, as well as how and where the PCM was installed in the building envelope, are crucial factors to be considered before application in practice. In this study, a simplified experimental set-up including a hot-box was used. The PCM material Climsel28 with different layers thicknesses was installed in the sidewall of a hot-box. Extruded polystyrene (XPS) foam boards were used as wall insulation material in the study. XPS was installed as a reference case and in different layer combinations with the PCM. The sequence of the XPS and PCM was varied. Temperature and heat flux were measured in different positions of the hot-box and on the tested walls. A 3D COMSOL model was developed to study the thermal performance of the system. The model was validated in the study using the collected experimental data. The results indicated that the developed COMSOL model can reasonably predict the performance of the system, both with and without the incorporation of PCM. Additionally, the measured temperature stratification were theoretically validated by the COMSOL model. The study gives indicative guidance of how PCMs can be installed in building constructions elements to reduce temperature peak loads and thus also contributing to an improvement of the indoor thermal comfort.

With a view to further enriching the college practical teaching conditions and also for the college teaching being closer to actual combat, a study is made on basis of system demand analysis in the early stage about the internal interface relationship and information/control process of the antagonistic virtual simulation training system with a key technology analysis made to lay a solid foundation for the implementation of the antagonistic virtual simulation training system.

To understand the influence of PCM wall configurations on the thermal performance of building envelopes, an explicit finite element model of heat transfer from indoor to outdoor (or vice versa) is developed. The accuracy of this model is first validated against the electrical circuit analogy model, and then compared with the experimental data measured in a Hot-Box device. A good agreement between the simulation results and experimental results is obtained. The results of this study show that the PCM configuration layer sequence significantly will affect the thermal performance of building envelopes and that the FEM model developed is a promising tool, which after some more development may be used for optimising PCM wall configurations.

Some materials will be hydrogenated to corrosion, such as metal materials, organic materials, polymer materials and so on, when the concentration of hydrogen in a mixed gas is greater than 4% in a closed space of micro environment. Their performances will be seriously affected. So removing or reducing the concentration of hydrogen in a micro environment can fundamentally solve the problem of hydrogenation corrosion. Metallic hydrogen removing agent and organic hydrogen removing agent are the main research directions of controlling materials of hydrogen concentration in micro environment. Current research status in the world are comprehensively reviewed from these two aspects. Features and application scopes of these two kinds of materials are pointed out separately, which provide a theoretical reference for the prevention of accidents caused by hydrogenation corrosion.

Some materials will be hydrogenated to corrosion, such as metal materials, organic materials, polymer materials and so on, when the concentration of hydrogen in a mixed gas is greater than 4% in a closed space of micro environment. Their performances will be seriously affected. So removing or reducing the concentration of hydrogen in a micro environment can fundamentally solve the problem of hydrogenation corrosion. Metallic hydrogen removing agent and organic hydrogen removing agent are the main research directions of controlling materials of hydrogen concentration in micro environment. Current research status in the world are comprehensively reviewed from these two aspects. Features and application scopes of these two kinds of materials are pointed out separately, which provide a theoretical reference for the prevention of accidents caused by hydrogenation corrosion.