Search

A compact electro-opto-thermal model of 2-D vertical cavity surface emitting laser (VCSEL) arrays considering the current crowding effect in each array cell is established to study the impact of oxidation aperture on the device performance. Simulated results shows that increasing oxidation aperture of array cell is helpful to improve the uniformity of current density distribution. With careful design of non-uniform oxidation aperture layout, both the uniformity of the temperature distribution and the current distribution is improved by 36.52% and 42.08%, respectively. Furthermore, 3×3 VCSEL arrays with uniform oxidation aperture (array-1) and non-uniform oxidation aperture (array-2) are fabricated and the L-I-V curves of two types of VCSEL arrays at different biases are also measured. The peak output optical power of array-2 is enhanced to 1.83mW with an improvement of 8.91% when compared with that of array-1. Moreover, the total optical output power of array-2 is always superior to that of array-1 over a wide bias current range.

Non-uniform series resistance design of VCSEL arrays is studied to improve thermally induced current bifurcation based on an electro-opto-thermal model of VCSEL arrays. Taking an 850nm VCSEL array with 4×4 cells for example, the impact of series resistance on current bifurcation is investigated. Increasmg series resistance is helpful to enhance the critical current values of current bifurcation point (Irc) and hence delay the current bifurcation phenomenon. For VCSEL array with non-uniform series resistance, Irc is increased by 28.6% and the total output optical power is enhanced by 14.3% when compared with that of VCSEL array with uniform series resistance. Therefore, non-uniform series resistance design is a better method for delaying the current bifurcation phenomenon and enhancuig the output optical power of VCSEL arrays.