Search

Damage equivalence factors for deck slabs of steel railway bridges According to EN 1993‐2, the fatigue verification of railway bridges can be based on internal forces due to the standard load model 71. These internal forces are to be multiplied by a dynamic coefficient Φ2 and a damage equivalence factor λ. In this paper, factors λ1 allowing for the damage effect of traffic on quadrilaterally supported plates with torsionally flexible supports at the longitudinal edges as encountered in single‐track railway‐brides in a span range between 10.0 and 27.5 m are derived for three standard traffic situations. The required damage equivalence factors λ are obtained from the factors λ1, considering the annual traffic volume and the requested service life. [ABSTRACT FROM AUTHOR]

Unexpected fatigue cracks at main girders of a railway bridge – strain measurements under service and analyses based on fracture mechanics At a steel railway bridge, erected and taken into service in 1960, fatigue cracks were detected at some transverse stiffener to web connections at the lower flange of the main girder. These findings were surprising, because this specific connection detail was suggested in previous national design standards for fatigue. The paper presents the comprehensive strain measurements under service to show the local stress field at the critical detail within the web plate of the main girder, indicating the well‐known phenomenon of distortion‐induced fatigue, but with unexpectedly high resonance‐like bending stresses in the web. Based on fracture mechanics analyses, with implementation of the measured strain/stress data due to local and global effects at the transverse stiffener connection, as well as the measured material properties (fracture toughness and crack growth parameters) the remaining fatigue life was analysed. The positive results allow an unrestricted train operation in the future. It also turned out, that the mixed‐mode effects must be taken into account and considering only mode I at the crack tip may lead to unsafe results. [ABSTRACT FROM AUTHOR]