Search

ABSTRAK Tujuan dari penelitian ini adalah untuk mengetahui sifat fisis dari kertas yang dihasilkan. Metode penelitian yang digunakan adalah metode eksperimen dengan tujuan untuk mencari alternatif bahan baku kertas. Terdapat variasi persentase berat dalam campuran antara daun nanas dan kulit durian, yaitu 40%:60%, 50%:50%, dan 60%:40%. Daun nanas dan kulit durian dimasak dalam larutan NaOH 3% pada suhu 90℃, kemudian dilakukan proses pemutihan dengan larutan H2O2 10% lalu disaring dan dikeringkan. Setelah kering, pulp dicampur dengan komposisi yang telah dirancang menggunakan blender dan dicetak menggunakan cetakan kertas. Hasil pengujian sifat fisis kertas menunjukkan nilai gramatur tertinggi yaitu 90 gram/m2 yaitu pada variasi sampel 40%:60% dan nilai terendah yaitu 79 gram/m2 pada variasi sampel 60%:40%. Untuk pengujian bulk nilai tertinggi yaitu 1,44 cm3/gram pada variasi sampel 60%:40% dan nilai terendah yaitu 1,22 cm3/gram pada variasi sampel 40%:60%. Dari nilai tersebut sudah memenuhi nilai SNI 7274:2008 untuk menjadi mutu kertas cetak A. Kata kunci: kertas, selulosa, daun nanas, kulit durian. ABSTRACT The purpose of this research is to determine the physical properties of the paper produced. The research method used is an experimental method with the aim of finding alternative raw materials for paper. There are variations in the percentage of weight in the mixture between pineapple leaves and durian skin, namely 40%:60%, 50%:50%, and 60%:40%. Pineapple leaves and durian skin are cooked in 3% NaOH solution at 90℃, then a bleaching process is carried out with 10% H2O2 solution and then filtered and dried. After drying, the pulp is mixed with the composition that has been designed using a blender and printed using a paper mold. The results of testing the physical properties of the paper showed that the highest grammage value was 90 gram/m2 at the sample variation of 40%:60% and the lowest value was 79 gram/m2 at the sample variation of 60%:40%. For bulk testing, the highest value is 1,44 cm3/gram for a sample variation of 60%:40% and the lowest value is 1,22 cm3/gram for a sample variation of 40%:60%. From this value, it meets the value of SNI 7274: 2008 to become A printing paper. Keywords: paper, celluloce, pineapple leaves, durian skin.

Introduction. Social restrictions due to COVID-19 have made it difficult to obtain research data and literature to support publication activities. Universitas Airlangga (UNAIR) provides Remotex facilities or remote repository access, where academics can read and download journals of international repute. This paper aims to analyze whether there is a relationship between RemoteXs access by faculty and the number of publications on Scopus. Methodology. This study uses statistical data on the number of times the repository is accessed by the faculty. a sample of the number of papers was also taken from the Scopus website. Data were analyzed by the Pearson Correlation method. Results and discussion. The results of the study show that the number of lecturers' accesses has no correlation with the number of publications. Meanwhile, the total repository access at the faculty is strongly correlated with the number of publications. Conclusion. There is no relationship to how many times the number of RemoteXs access publications on Scopus. However, there is a relationship with the faculty, this is because of the doctoral program in the faculty that is required for publication.

Environmental issues developed rapidly driven by the high impact on environmental damage due to the production process that is not environmentally friendly. The increase of goods and services consumption that are quite high throughout the world has resulted in a reduction in natural resources that have an impact on the environment. Efforts to reduce this impact are the existence of a green consumption policy. In 2006, Indonesia introduced eco-label markers on products that have been produced environmentally friendly. This policy needs to be supported by increasing consumer awareness to buy eco-labeled products. This study purposes to identify factors that influence consumer awareness in purchase eco-labeled paper products. This study uses the Structural Equation Modeling, while data processing uses AMOS software. The results showed that the higher the consumer's concern about the state of the environment would be to increase a proper assessment for the environment (environmental attitude), and ultimately the consumer would consciously consume products that have a minimal impact on the environment (environmentally conscious purchasing behavior). Recommendations that can be given to increase consumer awareness in purchasing eco-labeled products, including the use of mass media; environmental education; always socializing to the public regarding environmental issues; provide training to producers

PT. Indah Kiat Pulp & Paper Tbk Tangerang merupakan salah satu produsen besar yang memproduksi kertas. Struktur organisasi perusahaan bertipe fungsional dengan total tenaga kerja kurang lebih mencapai 1300 orang. Manajemen persediaan di PT. Indah Kiat Pulp & Paper Tbk Tangerang dikelola oleh Departemen Material Management (MM). Sistem penggunaan bahan baku berupa pulp yang diterapkan di PT. Indah Kiat Pulp & Paper Tbk Tangerang adalah make by order. Pelaksanaan proses produksi di PT. Indah Kiat Pulp & Paper Tbk Tangerang tidak dapat mendatangkan bahan baku secara satu persatu. Bahan baku tersebut pada umumnya akan dibeli dalam jumlah tertentu, dimana dengan jumlah yang tersedia ini akan dipergunakan untuk menunjang pelaksanaan proses produksi perusahaan yang bersangkutan dalam beberapa waktu tertentu pula. Pada keadaan semacam ini, maka bahan baku yang sudah dibeli oleh perusahaan namun belum dipergunakan untuk proses produksi, akan masuk sebagai persediaan bahan baku dalam perusahaan tersebut. Hasil peramalan persediaan bahan baku satu tahun ke depan digunakan sebagai pedoman perusahaan untuk estimasi penerimaan order berdasarkan data historis persediaan bahan baku dua tahun terakhir, yaitu Agustus 2014 – Juli 2017. Model SARIMA (Seasonal ARIMA) terbaik yaitu (0,1,1) (0,1,1)4 dengan MSE 0.0000109

The paper porosity study has been done by observing microscopically.The purpose is provide airborne porosity data on various paper types, so that we can rank the ability of liquid absorption on the same paper type. This porosity analysis is done by using ImageJ, with converting the image to binary, set the threshold limit, and clarify the watershed limit. The result of the porosity of filter paper A=51,50586 , B=18,30719 ,C=21,68076 ,D=29,72028 ; tissue paper A=9,174071 ,B=20,96931 ,C=32,76454 ; HVS paper A=23,31616 ,B=27,70944 . So it can be concluded that the ability of filter paper absorption A > filter paper D > filter paper C > filter paper B. Absorption ability tissue paper C > tissue paper B > tissue paper A. Absorption ability HVS B paper > HVS paper A. In general can be inferred that the higher the porosity value of the paper the greater ability to absorb liquids on paper.