Search

Glycerol in large quantities as a by-product of biodiesel production is a promising feedstock to be converted into more valuable products such as acetin. In this work, acetin converted from glycerol acetylation with acetic acid was performed over graphene oxide as a catalyst in a batch reactor. The study's objective was to evaluate the effect of sodium nitrate amount in the catalyst preparation on the catalyst's characteristics and catalytic performance. The graphene oxide (GO) catalysts were charac­terised by various tests, such as SEM-EDX for their morphology, the nitrogen adsorption capacity using Breneur-Emmet Teller (BET), structural analysis using XRD, functional group us­­ing FTIR, and catalytic activity on glycerol acetylation. The GO1, GO2, and GO3 catalysts were varied based on the NaNO3 amount in the modified Hummer method. The experiments found that the NaNO3 amount in catalyst preparation plays a vital role in GO structure formation. The GO2 catalyst has the highest performance, as indicated by the highest surface area, pore volume, and size. High glycerol conversion (94 %) and selectivity toward the interest products of triacetin (24 %) and diacetin + triacetin (83 %) were reached in 2 h of reaction using three wt.% catalysts, 110 °C reaction temperature, and 1:9 molar ratio of glycerol to acetic acid. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

A new Zn(II) complex of 4-acetylbenzoic acid, namely [ZnL2(H2O)2] (1) (HL = 4-acetylbenzoic acid) has been synthesized in water-ethanol (v:v = 1:2) solution using zinc acetate dihydrate, 4-acetylbenzoic acid, and NaOH as reactants. The structure of complex (1) has been characterized by IR and X-ray single-crystal diffraction. X-ray diffraction analysis of complex (1) reveals that the Zn(II) ion is six-coordinated in a distorted octahedral coordination geometry with four carboxylic O atoms from two different bidentate 4-acetylbenzoic acid ligands (O1, O2, O1a, O2a) and two O atoms from two coordinated water molecules (O4 and O4a). Complex (1) forms 1D chained structure by the intermolecular and intramolecular O-H···O hydrogen bonds, and further forms a three-dimensional network structure by the π-π interaction of benzene rings and intermolecular O-H···O hydrogen bonds. The singlet ground-state geometry of the complex (1) were optimized using the PBE0 functional. The intermolecular interactions of complex (1) were quantitatively analysed by 3D Hirschfeld surface analysis and associated 2D fingerprint plots. The catalytic activity of complex (1) has been tested for the oxidation of benzyl alcohol under O2 atmosphere. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

A new binuclear Zn(II) complex, [Zn2L2(BIPY)2(H2O)2](1) (H2L = homophthalic acid, BIPY = 2,2'-bipyridine) has been synthesized by one-pot method of homophthalic acid, 2,2'-bipyridine, zinc acetate dihydrate, and NaOH in water/ethanol (v:v = 1:1) solution. The structure of complex (1) was characterized by IR and X-ray single-crystal diffraction analysis. The results show that each Zn(II) ion is five-coordinated with two carboxylic O atoms from two homophthalate ligands (O2, O3 or O2a, O3a), two N atoms from two 2,2'-bipyridine ligands (N1, N2 or N1a, N2a) and one O atom from coordinated water molecule (O5 or O5a), and forms a distorted trigonal bipyramid coordination geometry. Complex (1) forms 1D chained structure and 3D network structure by the p-p interaction of 2,2'-bipyridine ligands. The Hirschfeld surface analysis of complex (1) was calculated. The catalytic performance of complex (1) has also been investigated for the oxidation of benzyl alcohol under O2 atmosphere. The optimal reaction temperature and pressure were 100 °C and 0.3 MPa for complex (1). Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

A new trinuclear Zn (II) complex, [Zn3(L1)4(L2)2(CH3COO)2] (1) (HL1 = 6-phenylpyridine-2-carboxylic acid, L2 = bis(4-pyridyl)amine) has been synthesized by 6-phenylpyridine-2-carboxylic acid, NaOH, bis(4-pyridyl)amine and Zn(CH3COO)2•2H2O. The complex 1 has also been structural characterized by elemental analysis and single crystal X-ray diffraction. The results reveals that complex 1 is made up of three Zn(II) ions, four L1 ligands, two L2 ligands and two CH3COO- anions. In 1, both Zn1 ion and Zn1a ion are five-coordinated with two O atoms from two different L1 ligands, two N atoms from two different L1 ligands, and one N atoms from bis(4-pyridyl)amine ligand, respectively, and forms a distorted trigonal biyramid geometry. And Zn2 ion is four-coordinated with two O atoms from two different CH3COO− anions and two N atoms from two different L2 ligands, forming a distorted tetrahedral geometry. Complex 1 displays a 3D network structure by the intermolecular N−H···O hydrogen bonds. The catalytic performance for oxidation of benzyl alcohol with O2 was studied under mild reaction conditions using complex 1 as catalyst. The results demonstrated that the catalysts were very active, and the yield of benzaldehyde was 50.8% at 90 °C with THF as solvent under 0.5 MPa O2 within 3 h. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

In ethanol-water (v:v = 1:1), a new Ni(II) complex, [Ni(L)2(H2O)2] (1) (HL = 6-phenylpyridine-2-carboxylic acid) was synthesized using 6-phenylpyridine-2-carboxylic acid, NaOH and Ni(CH3COO)2.4H2O. The structure of complex 1 has been determined by elemental analysis and single crystal X-ray diffraction. The single crystal analysis shows that complex 1 contains one Ni(II) ion, two L ligands and two coordinated water molecules. In 1, the Ni(II) ion is six-coordinated to two O atoms and two N atoms from L ligands and two O atoms from coordinated water molecules, respectively, which form a distorted octahedral coordination geometry. The whole unit of complex 1 is interconnected to each other through intermolecular N−H•••O hydrogen bonds involving oxygen atom of coordinated water molecule and the oxygen atoms of L ligand to form 1D molecular architecture. The catalytic activity of complex 1 for oxidation of benzyl alcohol with O2 was investigated. The complex 1 shows good catalytic performance for the oxidation of benzyl alcohol, the benzyl alcohol conversion, benzaldehyde selectivity, and benzaldehyde yield were 49.1%, 92.0%, and 45.2%, respectively, at 90 °C under 0.7 Mpa O2 for 2 h. Moreover, complex 1 could be recovered easily by centrifugation and used repetitively for at least four times. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

A new six-coordinated Mn(II) coordination polymer, [Mn(L1)(L2)2]n (L1 = 2-aminopyrimidine, HL2 = 3-bromo-2-hydroxybenzaldehyde) was synthesized by 3-bromo-2-hydroxybenzaldehyde, NaOH, 2-aminopyrimidine and manganese(II) acetate dihydrate. The Mn(II) coordination polymer was structural characterized by elemental analysis and single crystal X-ray diffraction. The results show that each Mn(II) ion is six-coordinated with two phenolic hydroxyl O atoms from two 3-bromo-2-hydroxybenzaldehyde ligands (O1 and O4), two formyl group O atoms from two 3-bromo-2-hydroxybenzaldehyde ligands (O2 and O3), and two N atoms from two 2-aminopyrimidine molecules (N1A and N2), and forms a distorted octahedral coordination geometry. The Mn(II) coordination polymer displays a 1D chained structure by the bridge effect of 2-aminopyrimidine N atoms. The catalytic activities of Mn(II) coordination polymer and Pd@Mn(II) coordination polymer for hydrogenation of 1,3-butadiene have been investigated. The Pd@Mn(II) coordination polymer catalyst shows the good catalytic activity and selectivity in the hydrogenation of 1,3-butadiene. The 1,3-butadiene conversion is 61.3% at 70 °C, and the selectivity to total butene is close to 100%. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

A new calcium(II) complex was synthesized by one-pot synthesis method from disodium 4-formylbenzene-1,3-disulfonate, isonicotinic acid hydrazide and Ca(ClO4)2•2H2O. The structure of calcium(II) complex was determined by elemental analysis, IR and single crystal X-ray diffraction. The results show that the Ca(II) complex molecules form 3D network structure by the interactions of π-π stacking and hydrogen bonds. The Ca(II) complex catalyst could efficiently catalyse oxidation of benzylic alcohol with good conversion of benzyl alcohol (78 %) and excellent selectivity of benzaldehyde (98 %).

A new Mn(II) complex material has been synthesized by one-pot reaction of Mn(CH3COO)2·4H2O, 1,4-phenylenediacetic (H2L), 1,10-phenanthroline (phen), and NaOH in water/ethanol (v:v = 1:1) solution. The structure of Mn(II) complex was determined by elemental analysis, FTIR, and X-ray single-crystal diffraction analysis. The results reveal that Mn(II) complex was constructed by a monodentate 1,4-phenylenediacetate ligand, two phen ligands, a coordinated water molecule, 0.5 uncoordinated 1,4-phenylenediacetate ligand and six uncoordinated water molecules. The complex molecules form 1D chain structure by the π-π interaction of phen molecules. The catalytic activity of Mn(II) complex for coupling of benzaldehyde, phenylacetylene and piperidine in 1,4-dioxane has also been investigated and the maximum yield of propargylamine is up to 72.2 % after 12 h at 120 oC.

In order to study the catalytic activity of Cu(II) coordination polymer material, a novel 1D chained Cu(II) coordination polymer material, [CuL(bipy)(H2O)5]n (A1) (H2L = 1,4-phenylenediacetic acid, bipy = 2,2’-bipyridine), has been prepared by the reaction of 1,4-phenylenediacetic acid, 2,2’-bipyridine, Cu(CH3COO)2·H2O and NaOH. The composition of A1 was determined by elemental analysis, IR spectra and single crystal X-ray diffraction. The results of characterization show that each Cu(II) atom adopts six-coordination and forms a distorted octahedral configuration. The catalytic activity and reusability of A1 catalyst for A3 coupling reaction of benzaldehyde, piperidine, and phenylacetylene have been investigated. And the results show that the Cu(II) complex catalyst has good catalytic activity with a maximum yield of 54.3% and stability.

Copper/Copper oxide (Cu/Cu2O) nanoparticles were synthesized by modified chemical reduction method in an aqueous medium using hydrazine as reducing agent and copper sulfate pentahydrate as precursor. The Cu/Cu2O nanoparticles were characterized by X-ray Diffraction (XRD), Energy Dispersive X-ray Fluorescence (EDXRF), Scanning Electron Microscope (SEM), and Transmission Electron Microscope (TEM). The analysis revealed the pattern of face-centered cubic (fcc) crystal structure of copper Cu metal and cubic cuprites structure for Cu2O. The SEM result showed monodispersed and agglomerated particles with two micron sizes of about 180 nm and 800 nm, respectively. The TEM result showed few single crystal particles of face-centered cubic structures with average particle size about 11-14 nm. The catalytic activity of Cu/Cu2O nanoparticles for the decomposition of hydrogen peroxide was investigated and compared with manganese oxide MnO2. The results showed that the second-order equation provides the best correlation for the catalytic decomposition of H2O2 on Cu/Cu2O. The catalytic activity of hydrogen peroxide by Cu/Cu2O is less than the catalytic activity of MnO2 due to the presence of copper metal Cu with cuprous oxide Cu2O. © 2015 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)

The aim of this work was to obtain samples of Ag - doped manganese-cerium mixed oxides and explore their characteristics. Six catalysts were prepared by the co-precipitation process followed by impregnation method for Ag incorporation. These catalysts were characterized in particular by means of TEM, XRD, TPR and examined on the reaction of hydrogen peroxide catalytic decomposition. The samples obtained were solid solution nanoparticle agglomerates with irregular surface morphology. The results pointed out that the highest activity in oxidation reactions should possess Ag/Ce0.23Mn0.77O2-δ catalyst. © 2013 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)