Search

For dissimilar metal welds, between austenitic stainless steels and ferritic steels, an austenitic stainless steel filler material with an adequate composition is normally used. To minimize the risk of hot cracking, the weld zone should preferably be constituted by an austenitic microstructure with a small amount of ferrite δ. During solidification, the microstructures depend on filler material and base material compositions. Useful indications of the weld zone microstructures can be drawn from such diagrams, for example the Schaeffler diagram, which defines the fields of existence of the phases as a function of composition expressed in terms of chromium equivalent (Creq%) and nickel equivalent (Nieq%). Recently alternative diagrams to Schaeffler diagram have been proposed. An amendment was introduced in one of these diagrams to better characterize the boundary area between martensitic-austenitic structure and fully austenitic structure. In this paper, by means of the experimental test results of austenitic stainless steel and ferritic steel joints, welded with laser beam process, some specimens were obtained with a weld zone composition near to the boundary between martensitic and austenitic zone in the Schaeffler diagram. The content of the elements was calculated by energy dispersive microanalysis (EDS). The microstructures were examined by optical microscopy and scanning electron microscopy (SEM) and by Vickers microhardness tests. For some microstructures, which were fully austenitic, the position of the corresponding points were located in the martensitic-austenitic zone below the line defined by the original Schaeffler diagram, while they were in accordance with the new definition of the boundary zone of the modified Schaeffler diagram. [ABSTRACT FROM AUTHOR]