Search

The reliability and performance of technological equipment largely depends on timely and reliable diagnostics of less durable assembly units, which include rolling bearings. An effective tool for determining state of the mechanical rotational systems on rolling bearings is vibration diagnostics. The variety vibration diagnostic method which are used on practise is due to the complexity extracting an informative component for estimation and predicting the state of rolling bearings from the general vibration signal of the study unit. The article is dedicated information content study of narrow frequency ranges of the vibration signal operation bearing assemblies paper machines and their use as diagnostic parameters for vibration diagnostics of rolling bearings. The paper presents the analysis results of vibration diagnostics existing methods of bearing assemblies of the technological equipment and establishes the determination defects in rolling bearings by changing the vibration level on the characteristic frequencies components of the vibration spectrum and the bypass spectrum provides more specific information about the nature damage of the bearing and its operation. On the processing experimental data base i.e. the average vibration velocity spectra signal taken from the bearing assembly paper machine, we offer a relative indicator for current state bearing estimation and its state prediction progress, which helps to make a decision on the suitability or unsuitability bearing.

The article highlights that in the space of modern design and artistic and creative education, in particular decorative and applied arts, the importance of paper is growing as both a creative material for modelling and for creating artistic products, and at the same time, the paper is simultaneously one of the most accessible art materials both from the viewpoint of ease of use and cost, and paper craft is an important basis for students' perception and creation of more complex artistic forms of professional art. It is noted that despite various editions, this disparity does not allow fully revealing paper-making as a conceptual whole – in the diversity of its connections with project culture, creative laboratory and design methodology in design. The purpose of the article is to reveal paper-making in the space of decorative and applied arts as well as to identify its theoretical and methodological foundations and to substantiate the role of paper-making in modern design for the formation of students' creative thinking alongside the formation of their artistic and pedagogical skills. These methods were applied and used to reveal the problem: general scientific (analysis, synthesis, generalization, systematization); scientific and specific: historical, artistic, pedagogical, psychological and approaches: systemic-structural, structural-functional, comparative, with the help of which the opinion regarding the phenomenon of paper-making is generalized, its essential content is clarified in the plane of decorative and applied arts, in modern design, and methodical methods are specified principles to the problem regarding the development of creative thinking of students specialized in artistic and pedagogical mastery. In the main content, it is noted that on the basis of methodological provisions and basic principles of traditional craftsmanship, the creative and essential foundations for decorative and applied arts are manifested, which ensures the formation of components of artistic competence and, at the same time, requires the use of students’ creative and figurative thinking. The idea of the key figurative-essential basis for paper-making is provided and it is noted that mastering the specifics of artistic imagery forms students' aesthetic ideas as well as a valuable act of understanding the world. It is highlighted that "paper plastic" also reflects the specificity of the author's approach to the study of compositional, constructive, structural and technological regularities of the work with material. In the content of the Methodological recommendations for conducting practical lessons, it is emphasized that the result should reflect the student's mastery – from the initial sketch through full-scale sketches to the design of the idea in the material. It is justified that in addition to the traditional methodical principles of education, there is a need to use certain art technologies. It is emphasized that the implementation of the developed "Conceptual Technology" in the teaching space of paper-making contributed to the decision-making process regarding the means of creating an artistic image. In the conclusions, it is noted that paper-making as a type of activity occupies an intermediate position between learning and playing and meets the conditions that ensure the effectiveness of the development of creative activity. Learning and practical work in the technique of papier-mâché using papier-mâché is important for the formation and development of abstract, associative, combinatorial, logical thinking, in the process of learning "paper-mâché" the creative thinking of students is formed and the skills of stylization and generalization are acquired, which involves the acquisition of practical experience for figurative reproduction. In the perspective of further research, it is important to consider the need to research, develop and create a model for the development of the future designer’s artistic and creative competence.

Introduction and purpose A pilonidal cyst also known as a pilondial sinus, is an inflammatory condition that occurs in the intergluteal region, which can lead to serious infections. It most commonly affects young men, with risk factors including the presence of hair in this area, excessive sweating, obesity, and poor hygiene. Symptoms include a lump, pain, and purulent discharge from openings in the skin. Diagnosis involves taking a medical history, a physical examination, and often an ultrasound. The aim of this paper is to present and compare the available methods for treating pilonidal cysts. Materials and methods Literature available in PubMed databases were reviewed using the following keywords: ‘’Pilonidal cyst’’, ‘’Hair cyst’’, ‘’Abscess’’, ‘’Treatment of pilonidal cyst’’,’’ Bascom II method’’,’’ Limberg flap’’,’’ Suchorski technique’’, ‘’V-Y or Z skin flap reconstruction’’,’’ the Karadakis’’ Results The available treatment methods can be divided into conservative and invasive approaches. Conservative methods include hair removal and improved hygiene. Among the surgical methods, there are traditional excision techniques and modern methods such as excision using the Bascom II method, Limberg flap, Suchorski technique, or V-Y or Z skin flap reconstruction. The Karadakis method, which involves shifting a skin flap, is particularly effective for obese patients. Conclusion Treatment of pilonidal cysts depends on the stage and symptoms. Abscesses require urgent surgical intervention, while asymptomatic cysts can be treated conservatively or surgically.

Subject and Purpose. Results are presented of the solar corona investigations performed with the world famous Ukrainian radio telescopes. The work has been aimed at offering a consistent review of recent achievements in observations of a variety of low-frequency radio emissions from the Sun. Methods and Methodology. The studies of the quiet (thermal) and sporadic (burst-like) radio emissions from the Sun have been carried out with the decameter-wavelength radio telescopes UTR-2, GURT and URAN-2. Specific features of the low-frequency solar radio emissions from a variety of sources are presented, with characterization of the optimized techniques that were applied in each case for evaluating physical parameters of the corona in the areas of decameter-wavelength radio wave generation. Results. The analysis of temporal, frequency and spatial characteristics of solar radio emissions has allowed suggesting a number of models for the coronal electron density distribution, and evaluating magnetic field strengths in the corona. Also, our experimental results have proven to be consistent with the observational data obtained in different frequency ranges and with the use of both ground based and space-borne instruments. Conclusions. The radio observations performed with Ukrainian radio telescopes have permitted studying, with high temporal, frequency and spatial resolutions, solar radio frequency emissions from various localized sources. Along with the large effective area and high sensitivity of the antennas, this permits application of a wide range of methods and tools aimed at detecting and analyzing solar bursts, of both strong and weak intensity, against the background of terrestrial interference of natural or artificial origin.

In this work, four waste paper composites were studied in terms of several photon interaction parameters over the energy region from 0.015 to 15.0 MeV. The waste paper and natural rubber (WP/NR) composites of different densities ranging from ρ = 0.894 to 1.16 gm⋅cm-3 were used for shielding radioactive rubble at different time period stages. Some additives were also used including high-abrasion furnace black, paraffin wax, B4C, as well as magnetite. The deduced parameters of photon interaction: equivalent atomic number Zeq, exposure buildup factor and energy absorption buildup factor have been studied as a function of incident photon energy, WP/NR elemental composition, and for penetration depths, up to 40 mean free path. The Zeq numbers have shown slight variation over the selected incident energy range and buildup factors were found to be modest at low and high photon energy meanwhile their values increase widely over the intermediate energy region. In addition, kerma relative to air for photon energies from 1 to 20 MeV were computed and show dependence upon equivalent atomic numbers. In this work, it was clear that filled samples offer better shielding capabilities than unfilled ones. The obtained data could be useful for radiation physicists and scientists in estimating the γ-irradiation received after applying such shields.

Purpose. To substantiate the breakdown mechanism of capacitor paper on the basis of numerical-field models with segmented cross-sections of cylindrical volumes of air and water, and also use the proposed models to determine the breakdown strength of air in micron-sized gaps under normal conditions. Methodology. The model bases on a finite element solution to an electrostatic problem in a volume of capacitor paper consisting of cellulose and pores with air and water. First, the possible scenarios for the growth of breakdown in capacitor paper are analyzed and to the conclusion is made, that complete breakdown developed from a partial breakdown in the air cavity. A brand of capacitor paper is chosen in such a way that when its thickness changed, the breakdown strength of the electric field changed over a wide range. Then, for the paper with the lowest average electric field intensity the possibility of explaining the complete breakdown by the breakdown of air segments on the basis of the Paschen dependence is checked. Further points of the obtained dependence by constructing models of papers of the same brand and a different thickness under the assumption of the similarity of electrostatic fields are determined. As such a criterion, the constancy of the equivalent effective permittivity are taken. Results. The dependence of the breakdown strength of the air in the range of 1.36...5.54 μm under normal conditions is determined. The obtained relationship is between the Peschot and Taev curves. Originality. For the first time, the possibility of indirectly estimation the breakdown strength of an insulating material using an electrostatic field model is indicated. Practical value. The proposed method for the numerical calculation of the breakdown voltage of air inclusions in the presence of water inclusions in the thickness of solid insulation can be applied to other types of solid thin-layer insulation.

The paper presents the research results on the properties of the pulp coniferous and deciduous wood composition in its original state and paper made from it, proposes a mechanism to increase the waterfast and waterproof food packaging paper by surface treatment with a composition based on polyamidepichlorohydrin with polyvinyl alcohol and urea. The study was conducted in order to ensure an increase in the consumer properties of packaging paper, since when packaging materials encounter food products, their structure can change under the influence of moisture, steam, and gas. Polyamidaminepichlorohydrin was used as the main component of the composition for paper processing, as functional additives: polyvinyl alcohol and urea. The above-mentioned starting materials are environmentally friendly, since foreign inclusions in food packaging materials would pose a serious danger to human health and life, as well as to the brand image of the product in which they would be detected. It was proved that high waterfastness and waterproofness, as well as the necessary level of barrier, protective and operational properties of packaging material for food products cannot always be obtained by introducing a significant amount of polyamidaminepichlorohydrin, so the paper investigated the mechanism of interacting cellulose fibers of paper with polyamidaminepichlorohydrin, and also proved the possibility of its use to obtain packaging paper with a given set of properties. It was found that the consumption of up to 4–6% polyamidaminepichlorohydrin provides the main increase in the mechanical strength of packaging paper, both in wet and dry conditions. The resulting waterfast and waterproof material can be used for food packaging.

The article is devoted to the press coverage of the development of the educational process in Kyiv in the Central Rada period. The relevance of the study is conditioned by the lack of a comprehensive research of the educational environment in Kyiv in this period with the use of periodicals. The daily Kyiv editions «Nova Rada» and «Kyivlyanyn» have been used as a source base. Being different in terms of materials, methods of presenting information, style of writing and ideological orientation, these news papers covered different issues of education in the city. Qualitative and quantitative analysis, namely content analysis, which is a formalized method of interpreting texts, allows to increase the information content of such an inexhaustible source as the press. In the context of this research, the qualitative and quantitative analysis is useful to study advertising and reference sections of news papers, determined by the consistency and relative homogeneity of the content, with the goal of stating the frequency of indication. With the help of news paper publications, the changes that took place in Kyiv education have been revealed, the factors that influenced its democratization and Ukrainization have been clarified, and the challenges faced by participants in the educational process during 1917 and early 1918 have been identified. The possibility of reconstruction of everyday life of Kyiv students, schoolchildren and teachers with the help of periodicals has been proved. The impact of revolutionary changes on the Kyiv educational environment has been studied through the prism of everyday life, and their consequences for the functioning of educational institutions have been assessed. On the basis of advertisement on the pages of the press, the conditions of admission to higher and secondary schools, the specifics of education, the social and gender component of potential entrants, the introduction of mixed education have been determined.

Background. The development of technologies for obtaining materials from plant raw materials, the use of which improves the consumer properties of cardboard and paper products and does not pollute the environment with harmful substances from synthetic polymers, is an urgent problem of our time. Objective. The purpose of the paper is to obtain pulp and nanocellulose from reed stalks by environmentally friendly methods and apply nanocellulose to improve the quality parameters of paper for packaging food products on automatic machines. Methods. To obtain pulp from reed stalks with a minimum residual content of lignin and minerals, two processing stages were used: alkaline extraction and organosolv cooking at a temperature of 97 ± 2 °C. Nanocellulose was obtained by the oxidation of organosolv reed pulp with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) in the TEMPO / NaBr / NaClO system, which is more environmentally friendly than acid hydrolysis. The resulting nanocellulose was applied to paper samples from waste paper and sulphate unbleached pulp at a consumption from 1 to 3 g/m2. Results. Organosolv pulp was obtained from reed stalks with a residual lignin content of 0.53 % and an ash content of 0.045 %, which was used to obtain nanocellulose. The resulting nanocellulose particles have a transverse size in the range of 5–20 nm, a length of up to several micrometers, and the tensile strength of nanocellulose films is up to 60 MPa. It is shown that the application of nanocellulose to the surface of the samples increases the breaking strength and breaking length, and reduces the surface absorbency of paper. It was determined that with a nanocellulose consumption of up to 3 g/m2, paper samples have indicators that meet the requirements of the standard for paper for packaging food products on automatic machines. Conclusions. The use of nanocellulose from reed stalks as a hardening substance for paper production will allow replacing environmentally harmful polymer additives and up to 50 % of more expensive softwood pulp with waste paper, while maintaining paper quality indicators at the level of standard requirements.

In recent years, concrete in the construction industry has rapidly increased worldwide, including developing countries like India. The raw materials required to produce such a quantity require huge depletion of natural resources. On the other hand, disposal of paper waste, fly ash, and plastic waste is one of the biggest problems faced by many countries, including India, the amount of waste collected and recycled is less compared to disposal quantity. The use of these wastes in concrete reduces the disposal of waste in nature. In this experiment work, the use of these wastes in the concrete has been studied. Preliminary tests like specific gravity, fineness modulus, and water absorption have been carried out on the materials. Various mix designs are prepared by partial replacement of cement with fly ash and paper pulp, and sand is completely replaced with the quarry dust, and coarse aggregate is replaced with shredded plastic waste to create sustainable concrete. A comparative study on the properties like slump cone, the weight of the cubes, compressive strength and split tensile strength, and feasibility of such concrete has been carried out. Results indicated that the weight of cubes started to decrease with the addition of waste. Compressive strength and split tensile strength show that the strength started to fall with the addition of plastic. The cost of concrete decreased with the addition of waste. 5 % of plastic waste in concrete and 3 % of paper pulp, and 5 % of fly ash is considered the optimal replacement percentage.

One of the most energy-intensive processes is the drying process. Therefore, an important task is to reduce heat consumption for drying. Various ways to improve the drying devices of paper and cardboard machines are identified. The main disadvantages of these improvements are given. The limiting factor of heat transfer from water vapor to paper is established. The dependence of thermal resistance on the thickness of the condensate layer is given. The authors have developed a new design for condensate drainage. The developed design allows installing movable siphons without replacement of steam inlet heads of the old type (for fixed siphons) with their insignificant modernization and cutting of an annular groove inside the drying cylinder. This will ensure a minimum level of condensate and eliminate the possibility of suction of steam into the condensate return system. Additionally, this will reduce thermal resistance, heat loss, and reduce energy consumption for paper drying as a whole.

In this work the peculiarities of reading comprehension from electronic, audio devices and hard copies were studied through comparative analysis of the learning accuracy and electrical activity of the brain when reading or listening to the text. Eighty students took part in the research. They were offered 2 passages of text from fiction and popular-scientific literature for reading, presented in a form of an e-book, MP3-format and in a printed copy. The level of comprehension and assimilation of the read material was checked by testing based on the content of the text immediately after reading and in 2 weeks. The comparative EEG analysis did not reveal significant differences in the spectral power of the studied ranges when reading a paper book and e-book. Differences were found when listening to audiobooks comparatively to reading. In general, the effectiveness of text learning does not depend on the way of its presentation, however, sex and individual traits of a person, such as preferred learning style and extraversion level, are more important.

New Ukrainian and world realities set new tasks for the higher educational establishments, which are related to the search for new, modern methods that allow to increase the effectiveness of training. Currently, topical are the issues of not only professional but also the personal development of the student forming the priority in the implementation of educational activities in universities, preparation for future professional activities, as well as for successful interaction in society. The concept of «individual social competence» is an important factor in creating a system of educational process which takes into account aspects of professional development, and at the same time the peculiarities of the formation of the student personality. The author analyses the concept of «competence», considers the key competences for lifelong learning, identified by the European Parliament and the Council of the European Union, including social competence, studies the scientific achievements of Ukrainian and foreign scientists, including G. Gedviliene, H. S. Han, K. M. Kemple, U.P. Kanning, M. Horenburg, G.W. Ladd, H. K. Ma, K. Monahan, M. Monnier, O.V. Varetska, N.I. Hlebova, D.V. Hubareva, O.I. Hura, M.O. Doktorovych, I.B. Zarubinska, O.O. Subina, V.M. Shakhrai. They explored different aspects of social competence of different age categories. The author concludes that, despite different interpretations, all scientists agree that social competence is an acquired skill, it can be formed and developed throughout life. It was also determined that the developed social competence determines the status of the individual in society, it affects the success in professional activities. The high level of social competence allows a person not only to be realized in professional activities, but also to influence the processes in society, which in turn determines its stability. The author’s definition of the concept of «individual social competence» is given in the paper; the author concludes that social competence is an integrated ability that contains other competencies: spiritual, civic, communicative, linguistic; the concept of social competence is closely related to professional competence, without the successful interaction of the individual with society it is impossible to acquire the skills and abilities inherent in a qualified specialist. Thus, an important task for modern higher education is the formation and development of social competence of students, which is the key to successful implementation of the future specialist in professional activities. The educational process should be aimed at forming a system of knowledge about interaction in society, understanding the system of social values, ability to cooperate in society, the ability to communicate constructively, because only a socially competent person can.

In the paper, the historiography of the problem is examined. The critique of the privet paper money which was circulating in the Ukrainian lands in 1917–1921 is conducted. The characteristics of such critique are shown and its distinctions from the critique of the state paper money are identified. The external signs of the bonds’ obverse and reverse are analyzed. The heraldic, emblematic, iconographic, sphragistics, neographic, filigree, ornamental, chronological and metrological elements of the Ukrainian privet paper money appearance are investigated and the role of these features is identified. The emblems, seals, imprints, signatures, series, numbers, dates are pointed out to be the most informative signs of the privet paper money. So, in the article, the great significance of the sphragistics, neographic and chronological data is underlined. By means of the text analysis, the issuers of bonds are identified. The critique of the bonds’ external features also showed the reasons for emission, the emitters’ guarantees and the scale of the privet paper money circulation.

Maintaining of the proper predetermined paper pulp consistency on the different stages of the paper or cardboard manufacturing process significantly affects on quality and self cost of manufactured articles. The improvement of precision and repeatability of the paper pulp viscosity and consistency measurements is relevant to paper industry. Objective of the work is to improve the industrial-type paper pulp rotational consistometer. A new method for measurement of paper pulp concentration by means of a rotational viscometer was suggested which enables determining the flow consistency index K and flow behavior index n in the Ostwald-de Waele power law. The influence of the following torques on the measurement results is eliminated thanks to the new method: the friction torque in the seal of the sensitive element, the friction torque in the bearings of the shaft and the torque created under the influence of the flow with distorted flow speed profile. This is achieved by measuring the torque which acts on the sensitive element approaching the selected frequencies of sensitive element rotation both from the lower and higher frequencies. The mean torque value is calculated based on the obtained values. The measurements are conducted for two sensitive element rotation frequencies adjusted in advance. The frequency of sensitive element rotation is changed by means of a frequency converter. It is shown that by using two different rotation frequencies of the sensitive element of a rotational viscometer it is possible to define the flow consistency index and the flow behavior index. Paper pulp viscosity and consistency is defined on the basis of these two indexes. It is also suggested to average the results of viscous friction torque measurement approaching the rotation frequency of the viscometer sensitive element to the working frequency chosen for measurement from the lower and higher frequency ranges. By averaging the results of such measurement the friction torques in sealing and bearings supporting the sensitive element shaft are compensated. By changing the rotation direction of the sensitive element and by further averaging the obtained results it is possible to eliminate the influence of the asymmetrical distribution of paper pulp flow speed in the pipeline. This improves accuracy of the paper pulp consistency measurement.

Background. Development of technology for obtaining peracetic pulp from oat straw and its use in the production of one of the paper mass types. Objective. Determination of peracetic cooking technological parameters’ optimal values for oat straw peracetic cellulose quality indicators. Methods. The oat straw cooking was carried out with peracetic acid at 95 ± 1 °C from 90 to 180 min for hydromodulus 8:1 and 7:1, using a sodium tungstate catalyst. To determine the oat straw peracetic cellulose mechanical indexes, laboratory samples of paper weighing 70 g/m2 were made. Results. Technological parameters’ optimum values (temperature, cooking duration, hydromodulus, hydrogen peroxide and acetic acid concentration) for the oat straw delignification process were established. It is shown that the sodium tungstate catalyst addition to the cooking solution at a rate of up to 1 % of the plant raw material weight helps to reduce the lignin content in cellulose to 15 %. A diagram of the cellulose yield dependence on its residual lignin content for various methods of non-wood plant material species delignification is constructed. The high efficiency of the peracetic method for obtaining cellulose from non-wood plant raw materials, in particular from oat straw, has been confirmed. It is determined that the obtained peracetic cellulose from oat straw has high mechanical indexes. Conclusions. Oat straw peracetic cellulose can be used for the production of paper and cardboard mass types, in particular wrapping paper.

Lipoedema is a chronic progressive disorder of adipose tissue leading to an enlargement of lower extremities. It is considered to be rare; however, the prevalence of the disease is underestimated because it is commonly misdiagnosed as obesity or lymphedema and the general awareness is poor. The etiology of the disorder is considered to be multifarious, including genetic inheritance, hormonal imbalance and microcirculation alterations. Diagnosis is mainly based on medical history and physical examination. Management of lipoedema is focused on reducing the symptoms, improving the quality of life and preventing further progression of the disease. The aim of this paper is to raise the awareness of the disease and provide appropriate clinical guidance for the assessment of lipoedema. We searched through the PubMed/MEDLINE database and took into consideration all of the results available as of 6September, 2020 and outlined the current evidence regarding lipoedema epidemiology, etiology, clinical presentation, differential diagnosis, and management. Better understanding of lipoedema is crucial for establishing an early diagnosis and a proper treatment, which in turn will reduce the psychological and physical implications associated with the disease.

A visual test method has been proposed for the evaluation of the gold content. It is based on the linear dependence between the length of the colored zone on an indicator paper and gold(III) concentration. Indicator paper was covered by a polymer film and was in contact with the solution tested along one edge during analysis. It was impregnated by 3-phenyl-2,6-dimercapto-1,4-thiopyrone or by precipitate of its complex with copper(II). Besides Cu(II) can be replaced by the Au(III) ion tested in the composition of this complex. The concentration ranges for Au(III) determination were equal to 0.02−2 mg·L−1 or 4−590 mg·L−1, respectively, in the presence of excess of the transition and noble metals. It was demonstrated the effectiveness of the dynamic preconcentration of Au(III) for the subsequent colorimetric determination on paper filter for the concentration range 0.005–0.3 mg·L−1 (DL 0.02 mg·L−1) by using a sample volume of 10 mL. The developed procedures were successfully utilized for the determination of gold in synthetic mixtures, in auriferous quartz (RSD < 5%), and in ore from Zyryanovsk’s mine (Kazakhstan) with RSD < 8%.

Introduction. An important problem in power transformers resource prognosis is the formation of moisture dynamics trends of transformer insulation. Purpose. Increasing the accuracy of power transformer insulation resource assessment based on accounting of moisture dynamics in interrelation with temperature dynamics. Working out of moisture dynamics model in paper insulation-transformer oil system in conjunction with thermodynamic model, load model and technical maintenance model. Methodology. The mathematical models used for describe the moisture dynamics are grounded on nonlinear differential equations. Interrelation moisture dynamics model with thermodynamic, load and technical maintenance models described by UML model. For confirming the adequacy of model used computer simulation. Results. We have implemented the model of moisture dynamics in power transformers insulation in interrelation with other models, which describe the state of power transformer in operation. The proposed model allows us to form detailed trends of moisture dynamics in power transformers insulation basing on monitoring data or power transformers operational factors simulation results. We have performed computer simulation of moisture exchange processes and calculation of transformer insulation resource for different moisture trends. Originality. The offered model takes into account moisture dynamics in power transformers insulation under the influence of changes of the power transformers thermal mode and operational factors. Practical value. The offered model can be used in power transformers monitoring systems for automation of resource assessment of oil-immersed power transformers paper insulation at different phase of lifecycle. Model also can be used for assessment of projected economic efficiency of power transformers exploitation in projected operating conditions.

Annotation: In the article the paper of three copies of Krakow editions of Polish Herbal 1595 by Marcin of Urzędów, from Lazar printing house is analyzed. In the copies of the edition seven different types of paper were found. This paper was produced by six paper-mills nearby Krakow, and it is typical for Krakow paper market of that time. Paginal location of watermarks, their quantitative and percent composition are defined. Also the exploration includes leaves of one of the copies In 74, restored in 19th century. Instead of missed leaves the paper of the first part of 16th , 17th and 18th century was used to complete the copy.

Introduction. The moral and physical deterioration of medium voltage power cables with phase and zone paper-impregnated insulation requires implementation of quality systems and reliable nondestructive electric diagnostic. Informative indicator of the insulation is the time decay curve of the charging current. It reflects the processes of accumulation of space charges (absorption). The measurements are carried out the 15th since the second direct voltage supply, then – on the 30th and the second on the 60th second. The ratio of the parameters measured in these times gives the dimensionless criteria – absorption coefficients. Three measurements are made at different times, provide a more complete picture of the state of insulation than the measurement of the value of steady leakage (conduction-through), adopted in conventional prevention trials. Purpose. Research and testing methods of diagnostics of power cables with paper-impregnated insulation by absorption and phase characteristics of the belt insulation based on the total measurements. Methodology. A procedure for determining the individual characteristics of phase and zone paper-impregnated insulation based realized on the use of the equivalent circuit of a three-core cable in the metal shell and solved of an over determined system of linear algebraic equations by least squares. Results. The proposed method allows determining the absorption characteristics of the individual phase and zone insulation medium voltage power cables in the overall metal shell at a direct voltage. Individual characteristics reflect the characteristics of cables and allow a greater degree to assess the degree of aging of each of the components of paper-impregnated insulation. Originality. Regardless of the cable connection diagrams probing electric field grabs as the phase, and zone insulation. The cumulative nature of the measurement leads to the fact that the differences in the properties of insulation components are smoothed: the aggregate results of the measurements do not differ for the different schemes of the same type. The individual characteristics of isolation, defined on the basis of the proposed method are more differences than total, indicating that non-symmetrical modes of operation of the cable. Practical value. The values of individual characteristics power cables 6 kV are 3 times more total, because of what their direct measurement may be a problem. The total resistance of several insulation spaces connected in parallel, behind the individual. Smaller values of insulation resistance are measured more easily, especially on short samples cables.

The article addresses the filigrees on the paper of Krakow edition of Martin Siennik’s "Herbarium" of 1568 printed in the typography of N. Scharfenberg, five exemplars of which were found in the collection of VNLU. We have determined the filigrees quantity and percentage ratios, frequency of their detection, dynamics of paper change in a book and paper similarity in all the exemplars. Paper analysis of "Herbarium" exemplars proved that they were printed only on Krakow paper with the filigrees of local mills. It has also allowed us to ascertain the time of additional printing of two exemplars pages. Extra pages for one exemplar were printed in the late 16th century, for the other - in the 19th century. The first additional printing was conducted in the typography of N. Scharfenberg, the other, probably, was initiated by the book owner, a scientist and a bibliophile, the Duke Montresor. The filigrees study of Martin Siennik’s “Herbarium” demonstrated that they were printed on the paper similar to that of the Cyrillic edition of the Evangel of 1569 printed in Zabludow by Ivan Fedorov and Pavlo Mstyslavets. Therefore, most of the paper of the second edition was of Krakow origin

The article deals with the research methods of librarian documents paper properties, which characterize its durability most accurately. It is explained why the diversity in paper composition determines special properties of paper. The article features a conventional method of paper durability determination based on the study of paper properties during artificial aging in a high temperature thermostat. The authors provide information on physical and chemical properties of photographs and the research of photographs aging process, which takes place in librarian fonds as well. The necessity of fonds preservation regulatory regimes is accentuated as they help to slow the aging process of paper of the documents of all kinds. Modern conservation technologies enhancing the durability of librarian documents paper are described in the article as well

In the optics of attention was the story of the Japanese writer Komatsu Sake "Paper or hair", written in 1963. According to the content, the loss of paper changed the usual way of life of people, becoming a source of existential fears. As we believe, the artistic narrative anticipates the events of our time associated with the spread of the coronavirus infection COVID-19. An artistic description of the situation by a Japanese writer, a phenomenological immersion in reality and theoretical reflections by M. Heidegger's work on the existential of fear helped to reconstruct the psychological States of people in the context of a pandemic and to identify the structure of fear. In modern life, fear manifests itself in three aspects: before-than fear, fearfulness and about-than fear. As a result of the all-embracing nature of fear, the fearogenicity of being is born, which violates the stability of the individual's existence, its being in, dwelling in, and mastering with. The above leads to the individual's awareness of the direction of life towards death, which forces him to adapt to new conditions. As a support of the personality in its opposition to fear, we can call hope and effective manifestations that perform the role of care.

In the article watermarks of Gospel of 1600 without signatures from Vilnius Publishing House of Mamonichs are explored. As an example six copies from V. Vernadsky National Library of Ukraine holdings were chosen. The research enables us to determine the quantity of watermarks kinds and their percentage in circulation, to explore the dynamic of watermarks replacement and to define their origin. We have defined that more than half of paper used in the edition is produced in Lithuania but there also is a large amount of foreign paper, mostly of Cracow origin. The study also covers watermarks from two fragments of this edition, as well as those from copies held in the Library of Vilnius University and the National Library of Belarus. The kinds of filigrees at these copies differ from the filigrees at Kyiv copies. It was suggested that paper of different quality was purchased and more and less qualitative copies were batched for trading.

The article examines the scientific work of one of the prominent representatives of the 20th century Azerbaijani piano performing school, Honored Art Worker, Professor Nigar Usubova (1914–1994). N. Usubova devoted an important part of her life to pedagogical activity, raising a generation of talented pianists. She made an exceptional contribution to the development of the Azerbaijani piano school and the definition of its future directions. N. Usubova’s pedagogical principles are reflected in her dissertation work and methodical manual. As it is known, N. Usubova studied in the class of A. Goldenweiser and wrote these scientific works under the guidance of the prominent pianist. An important part of these scientific works is devoted to the study of A. Arensky’s piano creative activity. Here, the musician touched upon the features of the composer’s piano performing, as well as the characteristic features of his music. The research also provides performing characteristics of the works analyzed and covering various genres. The purpose of the research is to study the fundamental results and main performing principles in the scientific works dedicated to A. Arensky’s piano creative work by Nigar Usubova, a brilliant representative of the Azerbaijani piano school of the twentieth century. In these scientific research works, N. Usubova touched upon the features of the prominent composer’s piano creative work, performing principles, circle of images; moreover, analyzed the form, genre, tone and other aspects and conducted research on the background of characteristic features of Russian music. We would like to bring to your attention that N. Usubova’s scientific works have not been published. This raises the scientific significance and relevance of the topic more. These scientific works are the first research work dedicated to the study of A. Arensky’s piano music in the Azerbaijani science of music. The research methodology is based on analytical and theoretical analysis, as well as on the source research method (work with archival materials). The main principle is the study and analysis of the fundamental results obtained by N. Usubova in the study of piano music by A. Arensky The scientific novelty of the research is that for the first time the scientific works of the outstanding pianist Nigyar Usubov are studied, their scientific significance, as well as the issues reflected in those works, are revealed. We would like to bring to your attention that these scientific works reflect N. Usubova’s method of approach to A. Arensky’s piano pieces as a pianist. For this reason, these scientific works are a valuable recommendation for every pianist who turns to A. Arensky’s piano creative work. Conclusions. Nigar Usubova is the author of two scientific works and her scientific creative activity is devoted to the definition of performing features of A. Arensky’s piano creative work. Each of these scientific-methodical works was written under the guidance of a prominent representative of the Russian piano school, pedagogue A. Goldenweiser. In these works, N. Usubova worked on A. Arensky’s creative work in a comprehensive and detailed way. According to the author, A. Arensky’s piano creative work is characterized by the clarity of form and texture, the richness of melodic material, which brings him closer to Tchaikovsky’s chamber music. Although the composer prefers miniature forms in his piano creative work, it is also possible to find virtuoso pieces, etudes, scherzos and capriccios. These works, in particular, influenced the formation of S. Rakhmaninov’s and A. Scriabin’s creative activity. The main characteristic features here are polyphonism, polymelodism and polyrhythmics of the piano texture. Simultaneously, N. Usubova thoroughly studied the influence of Western European composers on the formation of A. Arensky’s creative activity.

The conducted study has shown problems with electronic documents already in the moment of their accession, as well as arrangement and description, storage and providing access to them in the archive. It turned out that, unfortunately, electronic documents are treated only as an addition to paper versions of materials. The study uses method of document analysis (including electronic document), as well as a survey – a questionnaire. The object of the study was a private papers of Professor Stanisław Gorgolewski.

The article analyzes the provisions of the White Paper on artificial intelligence as a source of the formation of European Union legislation in the field of artificial intelligence. It is noted that the study of legal regulation of artificial intelligence in the European Union will contribute to the formation of the domestic source base in the field of application of artificial intelligence. It has been analyzed that in scientific circles, the provisions of the White Book on artificial intelligence are highlighted by domestic scientists in a fragmentary manner, which makes it difficult to comprehensively perceive the content and meaning of the White Book as a whole. The article states that the legislation of Ukraine needs improvement, which consists in compliance with European standards in the field of artificial intelligence. It has been established that it is advisable to enshrine provisions on the use of artificial intelligence at the legislative level. The article examines the provisions of the European Data Strategy, which recognizes artificial intelligence as an important component of the data economy. It has been studied that the provisions of the European Data Strategy provide for a combination of technology, industry, digital infrastructure and regulatory framework. It was noted that the provisions of the Strategy regarding artificial intelligence were further developed in the White Book. The article specifies the concept of artificial intelligence in accordance with the provisions of the White Book. It is noted that the Provisions of the White Book are aimed at ensuring consultation of interested parties, collection of feedback as a basis for future decision-making processes. It has been proven that the White Paper can be considered a political document containing the goals and possible actions of the European Commission regarding the regulation of artificial intelligence and contains a list of political proposals, intentions and recommendations. It is noted that the White Book is a framework for future legislative proposals on the formation of a legal framework related to artificial intelligence in the European Union. The article defines the structure of the main provisions of the White Book and establishes the fundamental principles that determine the development and implementation of artificial intelligence. Attention is focused on chapter 5 of the White Paper, which is devoted to the «Ecosystem of Trust: Regulatory Framework for Artificial Intelligence», which is devoted to the key elements of the regulatory framework for artificial intelligence in Europe. [ABSTRACT FROM AUTHOR]

Correlation between parameters characterizing mechanical and thermal ageing of paper-impregnated insulation of medium voltage power cables is revealed. On the basis of linear and exponential regression analysis at confidence coefficient of 0.95, critical values of dielectric loss tangent of wrapping and phase insulation corresponding to the cable life termination are found.

Methodological aspects of qualifying academic papers preparation concerning defenitions of its theme, goals, objectives, subject and object of study are analyzed with business risk serves as example. It is shown than the research should be based on the principles of modern but not postmodern methodology.

Admission Dysfunctions of the lumbosacral spine are among the most common problems related to the movement of contemporary society throughout the world, and its incidence increases with age. In recent years, increased interest in the issues fascia, which until recently was neglected in the etiology of low back pain. One of the therapeutic options that can be applied in the case of chronic pain syndrome lumbar-sacral spine techniques are easing myofascial (ang. Myofascial release, MFR), which is one of the latest methods in the field of manual medicine. Objective of the work The aim of the work was overview AD recently published study on the effectiveness of techniques easing myofascial pain in chronic lumbar-sacral spine. Material and methods To find the current investigate research (publications of the last 5 years) dedicated to MFR in the treatment of chronic pain, lumbar-sacral spine searched the following databases: PubMed, PEDro (Physiotherapy Evidence Database), ScienceDirect and Academic Search Premier. The following keywords: myofascial release, myofascial release therapy, myofascial pain, chronic low back pain. Results 9 qualified to review the studies investigating the effect of loosening myofascial pain and range of motion, functional limitations, muscles, as well as the quality of life in people with chronic pain lumbosacral spine. Conclusions The results of this review show that there is little research on the MFR employs treat ailments low back pain lumbar - sacral. Based on the studies included in this review can be concluded that the MFR can be an effective treatment for back pain lumbar - sacral, but there is a need for further research with a well-developed research procedure that will allow the standardization of this therapeutic method.

Done correlation analysis of interconnection between the characteristics of protected against forgery paper (roughness parameters and fractal dimension) and optical characteristics of imprints (optical density, color difference), which enabled the prediction of the optical characteristics of impressions and taking into account the differences of optical characteristics in watermark areas and outside them. In this work experimental data of researches physical and technical characteristics, parameters of roughness and fractal dimension of samples of a banknote paper, and also characteristics of the protected paper with water signs are used. The relationship between the characteristics of the surface of the paper and the quality of the optical characteristics of the imprints is best observed when constructing graphical relationships between the relevant indicators. Dependence is established for each banknote paper sample. The calculation of quadratic deviations of experimental data showed a correlation between the characteristics of the surface of the paper and the parameters of optical density (D). Graphic dependencies are approximated by regressive equations with the definition of correlation coefficients. On the basis of the analysis of the obtained results and regression equations, interconnection of the characteristics of the surface of the banknote paper, the ink, the amount of ink on the imprint, which correlates with the optical characteristics, allows us to establish control and quality control. It was found that with increasing values of Ra there is a decrease in the optical density of the imprint and an increase in the optical density of its back (ie, interlacing). With an increase in the optical density of the paper to the lumen, an increase in the optical density of the imprint and a decrease in the optical density of the back of the imprint is observed. There is a tendency to increase the optical density of the imprint and decrease the optical density of the back of the imprint with the increase in the thickness of the paper. The obtained experimental data confirmed theoretical calculations. The error between the experimental data and theoretical calculations is 5–10 %. The advantage of this work is that, under the conditions of multi-series production of banknote products, it is possible to control the quality indices of the imprints for a larger number of materials, compared with the regulated standards.

Taking into consideration the necessity of the production of the resource-saving and ergonomic book and magazine covers under conditions of the recent highly competitive environment of the printed products distribution and the consumer pricing, the analysis of the conducted research identified the relation the changes in the indexes of strengthen capacity of single- and two-ply binding materials samples as well as pasted ones. These findings have applied relevance while selecting the covering components for their production with minimized economic indicators. The results of experimental researches revealed the differences in the efforts of the destruction of single and double samples: the variation is from 1.91 % (for coated paper weighing 150 g/m2) to 41.77 % (for coated paper weighing 300 g/m2). It is assumed that the covers, constructively production of a double sheet of binding material, wear out during prolonged use and the effects of destructive operational factors in proportions of the approximate experimental results obtained for each of the materials used. The research of the same type of binder materials on the strength of the stretching of the samples revealed the difference in the impact of binder glue on strength indicators. Analysis of the graphs of strength indicators reproduces a gradual increase in the digital characteristics of the strength of samples of coated paper in relation to the increase in the weight of paper and a sample of chrome-ersatz paper made from waste paper, as well as the impact of different types of adhesives on strength indicators, which creates a partial information base for their expedient use. The total influence of the structure of materials and adhesives on which glued sheets of paper and cardboard showed the maximum strength values during stretching in glued samples of coated paper weighing 350 g/m2, coated paper weighing 300 g/m2 and a 0.3 mm thick chrome-ersatz paper, glue-bonded polyvinyl acetate dispersion.

Filtering profile is one of the important stages of evaluation of the surface profile of the paper. The term ‘filtration’ should be understood as the methods (electrical, optical, mechanical, mathematical) to select the necessary information from the general profile of the surface. The impact of interference, especially emanating from the environment is inevitable when recording profiles. Above that, to level completely the device error of the test sample it is necessary to spend a large amount of time. Therefore, it is necessary to develop a mathematical model for the filtration of roughness of the surface paper profile. Goal of the research: to develop a technique for digital processing of paper surface profilographs to the further identifying the relation between the paper parameters and quality of the prints. The mathematical approach based on Gaussian filter and the analysis of profilograms obtained by the contact and optical methods of profilometry were used. It was developed software on the basis of Free Pascal software package as well. In order to provide the experimental investigations, profilograms of surfaces of various types of paper obtained in previous studies using a profilometer with an inductive converter, model 296 were used. Software for filtering the roughness of the surface profile of unprinted or printed paper using Gaussian filter, which allows to receive profilograms, eliminating in the profile the factors such as obstacles and errors caused by random vibrations, as well as to calculate the relevant roughness indexes, and to identify in the future the interaction with the quality of the prints on this paper.

The research’s efficiency the raster dot in the printing process is considered in the article. Changes in the color form quality depend to a large extent on the printing machine technical specifications and the ability to control them. Objectively, the color estimated characteristic on the form is the raster elements relative area. To predict the raster dot’s value, we need to conduct a large scale of experiments to provide reliable information and get the most beneficial results. Mathematical models based on factor planning of experiments allowing predict the raster dot’s unwinding magnitude in the printing process and determine the possible interaction of the roughness parameters the printing cylinder surface, its microhardness, the ink layer thickness and pressure in the printing process, and also allow to control the form quality parameters. This method is the most common type of first-order plans, the realization occurs because of finding the researched function for all possible combinations of factors variation levels. An important condition of experiment planning is a quality source of information, namely observance of all aspects of the theory of planning: the exclusion of systematic errors; conducting experiments according to the plan and methodology; carrying out repeated experiments in identical conditions; use of the results of these experiments; during the experiments, the selection of objects took place at random, which offset systematic mistakes. We obtained the average a priori ranked number of factors that affect the unpacking of the raster point, by the expert estimation method, as well as the boundaries of the changes in these factors, the methods and the accuracy of their measurement. Planning a multifactorial experiment allowed us to obtain a model for calculating the raster point on coated paper and adequately describe the interdependence of certain controlled factors.

The purpose of the research paper is to analyze the thematic scope of the archaeological subject matter of the collection of research papers 'Arkasivski Chytannia' and its author's representation at the conference (2011-2023). Scientific novelty. For the first time, the content of the archaeological subject matter of the collections of the International Scientific and Practical Conference 'Arkasivski Chytannia', which was held by the community of historians of V.O. Sukhomlynskyi Mykolaiv National University. The main areas of publications, stability, the geography of the authors' presentativeness, and prospects of using the materials of the collection in further publications are determined. Conclusions. During 2011-2023, 130 reports in various areas were presented in the 'Archaeology' section. The author's circle of archaeological issues was presented by 88 scholars. The archaeological area was represented mainly by researchers from Mykolaiv, Odesa, and Kyiv. Ten most active participants included almost exclusively representatives of Mykolaiv, who often presented (or were members of the group of authors) several reports. Foreign archeology was represented by scholars from Moldova, Poland, the Russian Federation, Germany, and the USA. In the regional context, the absolute majority of papers (81%) are devoted to the South of Ukraine. In the center of research attention are sites of the Bronze Age (34.6%) and Antiquity (31.5%), which together make up 66.1% or 2/3 of the materials. The main sites, that the authors regularly focused on, were the objects that are being studied (were studied) in the territory of Mykolaiv oblast: the fortified settlement of the Late Bronze Age Dykyi Sad (Mykolaiv), the ancient city of Olbia (the village of Parutino, Mykolaiv raion), the antique settlement on Berezan island (Mykolaiv raion), the antique settlement of Viktorivka (Mykolaiv raion) and the Bronze Age settlement of Rozanivka (Bashtanka raion). Other objects are represented mainly by individual publications. Almost 40% of the reports are presented with materials based on the results of field archaeological research, and almost 30% are material culture analyses. The history of archaeological science and the theory of archeology together account for slightly over 30%, of which the greater part is the history of archaeology. In general, analyzing the achievements of the conference in the presentation of archaeological materials, it is necessary to note the high level of the qualitative component of the majority of publications, originality, and novelty. All of the above, in our opinion, requires further popularization of the achievements of the conference in the scientific environment. [ABSTRACT FROM AUTHOR]

The problems of the creation of the basic reasons of Ukrainian nation’s political identity in the context of cultural and political dimension have been revealed in the article. It has been found that Cyril and Methodians understood the reasons of political division, which had historical and spiritual background. It has been shown that members of Cyril and Methodiy’s company tried to determine the variations of directions in the development of national and political unity and to determine the Ukrainian national - cultural priorities. They argued that the Ukrainian mentality had been formed on the basis of the following dominant principles: respect to the family, esthetical love to their native land, rational and ethical attitude and respect to human life. It has been indicated, that Cyril and Methodians had proven the idea about the state of the national culture, which had transformed into the global culture through Russian culture, although Ukrainian and Russian culture had perceived differently the importance of global processes. Big attention has been paid to the fact that free Ukrainian people had the experience of struggling for the affirmation of present national character, they did not want to form unions that would destroy freedom. The achievements of Ukrainian national freedom have been described primarily in the implementation of the “freedom” of the individual. Statements of the human freedom being the need of self-expression inside the individual freedom by means of obtaining a sign of social freedom have been suggested. It can be provided when collectivism has no pressure on the will of the individual and cannot influence its intellectual potential. The emphasis has been referred to the fact that the psychology of self-defense is based on Ukrainian cultural achievements being the part of its national identity. The forms of language development, the construction of temples, traditional rituals of rural life have been developed. The “live” power laid in national and cultural achievements of Ukrainians as they borrowed the values from other cultures and adapted to their minds. This happened due to the fact that national culture was formed as a specific element of the current world culture and withstand the pressure of “great power.” It has been noted that Ukrainians contributed to the development of Russian culture, they dissolved this so-called Little Russian mentality in the Russian public sphere and popularized Ukrainian spirit. The impact of ideas of European Slavophiles Decembrists, Ukrainian philosophers to the attitudes of Cyril and Methodius has been reviewed. Theoretical and methodological basis to analyze the maturing political identity formed work of contemporary philosophers, political scientists, cultural studies, where they were identified and developed fundamental categories methodology regarding patterns of political thinking Ukrainian nation.

Refinement of the aging integral formula is proposed. A com-puter model of insulation wearing out is developed using refined formula. Computer simulation of power transformer insulation wearing out over the next ten years of life is carried out.

A feedforward neural network based diagnostic model of oil-impregnated paper insulation of a current transformer has been developed. Its experimental validation as compared with a regression model has been performed.

The paper examines the rhetorical devices used in the metadata of medical research publications focused on the health implications of Russia’s full-scale invasion of Ukraine. The aim of the study is to analyze the stylistic means in article titles, through which the scientists aspire to convey their message to the audience, attract the readers’ attention, persuade and stimulate them to take specific actions. We selected 697 research papers from the PubMed database, published since 24 February 2022, using relevant search terms (“Ukraine”, “war”, “impacts”, and “health”), and examined them by applying the methods of stylistic, structural, and contextual analysis. The study detected 17 stylistic techniques (alliteration and assonance, allusion, anaphora, antithesis, ellipsis, idiom, metaphor, oxymoron, parallelism, paronomasia, periphrasis, personification, repetition, rhetorical questions, ecphonesis, and rhyming titles) that are used to highlight the numerous detrimental impacts of the war. The authors emphasize that analyzing the stylistic features of contemporary publications is essential for the advanced study of a foreign language, in particular, for identifying and comprehending the implicit meanings of texts, as well as applying relevant rhetorical devices in professional writing appropriately in order to achieve pragmatic communication goals. The findings of this study have important implications for educators in English for Academic Purposes and early-career academics, aiming to publish their research in international journals, aspiring to enhance visibility and maximize the impact of their articles within the scientific community.