Search

ObjectivesTo assess and evaluate the knowledge of Shanghai, China, residents on the use of SARS-CoV-2 antigen detection and rapid diagnostic self-test.MethodsA cross-sectional electronic survey using a self-administered questionnaire was sent via the online platform, Sojump, to general individuals. Multiple linear regression analysis was performed to determine the variables associated with knowledge of self-test.ResultsA total of 283 participants were recruited between July 1, 2022 and July 20, 2022 through an online survey. The mean score of knowledge on the tests was 14.33 ± 2.85 (out of 21). The questions concerning the depth of swab insertion and minimum number of swab rotations in the nostril, necessity of bilateral sampling, necessity of rotating and squeezing the swab for 10 times in the extraction buffer tube, and waiting time for the results showed the highest rate of incorrect responses. In the multiple regression analysis model, sex, social status, and source of information were associated with the knowledge on the self-test kits.ConclusionImmediate health education programs should be made available and the kits could be improved appropriately to ensure adequate knowledge. The use of technology should be fully leveraged to achieve accurate self-diagnosis and correct interpretation of the results.

Heterogeneous Fenton-like catalysis mediated by solid catalyst is a promising oxidation technology for water purification. The redox reactivity, cost-effectiveness, and environmental compatibility of solid catalyst play governing roles in oxidant activation, radical generation, and pollutant degradation. Herein, the surface-disordered WO3 (D-WO3) functionally engineered by the unique crystalline-amorphous core–shell structure is proven to be a superior solid catalyst of heterogeneous Fenton-like catalysis for peroxymonosulfate (PMS) activation and pollutant degradation in various water matrices. Six typical phenolic and dye pollutants are effectively and selectively degraded in the D-WO3/PMS system with much reduced matrix effects. Both radical identifying and scavenging tests elucidate the important role of non-radical 1O2 and mediated electron transfer during PMS activation on the D-WO3 surface. The superior Fenton-like activity of D-WO3 can be mainly attributed to the surface and sub-surface distorted lattice sites with finely tailored atomic and electronic structures and surface chemistry. These distorted lattice sites can thermodynamically serve as the key reactive centers of dissociative adsorption and catalytic activation for both PMS and pollutant, with high adsorption energy, strong structural activation, and smooth electron transfer. Our findings provide a new chance for heterogeneous Fenton-like catalysis mediated by transition metal oxides with high capacity, low cost, and no toxicity for promising water purification.

Using the waste basalt powder, ferric chloride (FeCl3·6H2O), ferrous sulfate (FeSO4·7H2O), 3-aminotrimethoxysilane (3-TMSPT) and Chitosan (CTS) as raw materials, through hydrothermal synthesis, in-situ synthesis, cross-linking and grafting methods, the amino-modified chitosan/magnetic zeolite composite (NH2-CTS/MZ) was prepared. The samples were characterized by SEM, XRD, VSM, BET, FTIR and XPS. The removal ability and adsorption mechanism of U(VI) in an aqueous solution by NH2-CTS/MZ were systematically studied. The results showed that under the conditions of 308 K and pH = 5, NH2-CTS/MZ reached adsorption equilibrium within 180 min, and the equilibrium adsorption capacity was 749.5 mg·g−1. The adsorption isotherm conforms to the Langmuir isotherm model (R2 = 0.998), and the adsorption kinetics conforms to the quasi-secondary kinetic model (R2 = 0.987). The adsorption behaviour is a spontaneous endothermic process. This study shows that NH2-CTS/MZ has a good application prospect in the removal of uranyl ions.

To evaluate the effect of Danhong Injection (丹红注射液, DH) on the index of microcirculatory resistance (IMR) and myocardial injury in patients with unstable angina undergoing elective percutaneous coronary intervention (PCI). Seventy-eight patients with unstable angina were randomly divided into DH group (39 cases) and the control group (39 cases) during elective PCI. Randomization was performed using a random-number table. The DH group received DH at a dosage of 40 mL (mixed with 250 mL saline, covered by a light-proof bag, intravenous drip) during PCI and daily for 7 consecutive days, while the control group only received the same dosage of saline. Both groups received standardized treatment. The IMR and fractional flow reserve (FFR) were measured at maximal hyperemia before and after PCI. Myocardial markers, including myoglobin, creatine kinase (CK), creatine kinase MB (CK-MB), and coronary troponin T (cTnT) values were measured at baseline and 24 h after PCI. Among the 78 patients enrolled, the baseline and procedural characteristics were similar between the two groups. There was no significant difference in pre-PCI myocardial markers and coronary physiological indexes between the two groups. However, post-PCI CK and CK-MB levels in the DH group were significantly lower than those in the control group (111.97 ± 80.97 vs. 165.47 ± 102.99, P=0.013; 13.08 ± 6.90 vs. 19.75 ± 15.49, P=0.016). Post-PCI myoglobin and cTNT-positive tend to be lower in the DH group than in the control group but did not reach statistical significance (88.07 ± 52.36 vs. 108.13 ± 90.94, P=0.52; 2.56% vs.7.69%, P=0.065). Compared with the control group, the post-IMR levels of the DH group tended to decrease, but there was no statistical difference (20.73 ± 13.15 vs. 26.37 ± 12.31, P=0.05). There were no statistical differences in post-FFR in both groups. The peri-procedural myocardial injury of the DH group was significantly lower than that of the control group (2.56% vs. 15.38%, P=0.025). During the 30-d follow-up period, no major adverse cardiovascular events occurred in either group. This study demonstrated benefit of DH in reducing myocardial injury and potential preserving microvascular function in patients with unstable angina undergoing elective PCI.

Magnetic carbon aerogels were prepared from inexpensive and readily available winter melon to adsorb U(VI). The morphology, structure, magnetism, characteristic functional groups and chemical bonds of magnetic carbon aerogels were characterized by TEM, SEM, XRD, BET, VSM, FT-IR, XPS. Under the condition of 303 K and pH 6, magnetic carbon aerogel reached adsorption equilibrium within 120 min, with the adsorption capacity of 230.3 mg g–1, much higher than that of carbon aerogel (77.9 mg g–1), which is the function of Fe–O. The good magnetism of magnetic carbon aerogels allows it to be easily separated from the solution by applying magnetic field. The adsorption isotherm data accord with Langmuir isothermal model. Adsorption is a spontaneous and endothermic process.

The association between socioeconomic status (SES) and bone mineral density (BMD) in men remains controversial. We showed that SES was positively associated with BMD in American men. Confounding factors like race/ethnicity and age could affect the association.Based on the data from the National Health and Nutrition Examination Survey (NHANES), 2011-2020, this article aims to investigate the association of SES (poverty income ratio (PIR) and education level) with the BMD in American men.We evaluated the association of SES with BMD in 4446 men aged ≥ 20 years (mean age, 41.0 ± 13.4 years) from the NHANES 2011-2020. BMD was measured by dual-energy X-ray absorptiometry (DXA) at the lumbar spine. We used multivariate linear regression models to examine the relationship between SES and total spine BMD, adjusted for a large range of confounding factors.Compared with other PIR quarters, individuals in the highest quarter of PIR were more likely to be older and white and had fewer smoking or drinking behaviors. After adjusting for race/ethnicity, age, drinking and smoking behavior, body mass index (BMI), total protein, serum calcium, serum uric acid, cholesterol, serum phosphorus, and blood urea nitrogen, PIR was positively correlated with total spine BMD (β = 0.004 95% CI: 0.001-0.007, P = 0.006). Individuals with the highest degree (college degree or above) had a 0.057 g/cmOur study indicates that SES was positively associated with the lumbar BMD among American men. Clinicians, healthcare providers, and policymakers should consider the unequal SES of men when implementing osteoporosis prevention and treatment strategies.

Autoimmune bullous diseases (AIBDs), presenting cutaneous and/or mucosal bullous lesions, are classified into pemphigus and pemphigoid diseases. A longtime observation for complicated AIBD cases is rarely reported. In this study, serum samples of one AIBD patient were collected at seven different time points during the disease course including a relapse, which were examined by our conventional and newly developed methods for the detection of autoantibodies. Interestingly, we found changes of both the presence and the titers of various autoantibodies in accordance with the changes of clinical features during the whole disease course, which indicated that the patient started as bullous pemphigoid and relapsed as concurrence of bullous pemphigoid and mucosal-dominant-type pemphigus vulgaris.

Additional file 8: Figure S1. Molecular Function (MF), Biological Process (BP) and Cellular Components (CC) analysis vehicle and B28 treated cell samples. (B28 vs. vehicle). Figure S2. Enrichment analysis of down-regulated and up-regulated differentially expressed genes (DEGs) based on GO database. (B28 vs. vehicle). Figure S3. Enrichment analysis of down-regulated and up-regulated differentially expressed genes (DEGs) based on Reactome database. (B28 vs. vehicle). Figure S4. Indexes of OCR and ECAR in B28 and vehicle treated cell samples. Figure S5. NAC significantly abolishes the effects of B28 on cell cycle, mitochondrial membrane potential and cellular bioenergetics. Figure S6. NAC blocks inhibition of cellular bioenergetics in GLS1 knockdown cells. Figure S7. Overexpression of YTHDF1 attenuates the effect of B28 on cellular bioenergetics in PAAD cells.

Additional file 7: Table S2. Detail information of plasmids used in this study.

Additional file 6: Table S1. Detail information of antibodies used in this study.

Photochemical oxidation is able to effectively regenerate the fouled electrode in electrochemical pollutant monitoring, while its regeneration capacity is limited by the surface-bound hydroxyl radical speciation with low activity and mobility, which is attributed to the dissociated water adsorption on hydrophilic metal oxides. In this work, fluorine-terminated {001}-exposed TiO2 single crystals (F-TiO2) are rationally designed to construct an Au-based electrochemical sensor (Au/F-TiO2) for dopamine (DA) detection in different matrices. The Au/F-TiO2 sensor exhibits an efficient and stable detection capacity in both environmental and biological samples. A superior photochemical regeneration capacity is obtained on the Au/F-TiO2 electrode with much reduced matrix effects under UV irradiation. Spectral observation, crystallographic analysis, pollutant degradation performance, radical inhibition, and surface enhanced Raman scattering tests reveal that both the fluorine-terminated surface chemical features and the bulk-free radical speciation are mainly responsible for the superior photochemical regeneration capacity of the Au/F-TiO2 electrode. Even for the real biological samples, a stable electrochemical DA detection is also achieved on the Au/F-TiO2 sensor. Our work establishes a new approach to refine electrochemical sensors for stable monitoring and provides a robust photoactive electrode substrate with high efficiency and low cost for practical applications.

Two-dimensional flaky magnesium-aluminum hydrotalcite (Mg-Al-LDHs) with uniform particle size distribution and high dispersion was prepared by the super-gravity rotating bed. The samples were chara...

Agricultural diseases and insect pests are one of the most important factors that seriously threaten agricultural production. Early detection and identification of pests can effectively reduce the economic losses caused by pests. In this paper, convolution neural network is used to automatically identify crop diseases. The data set comes from the public data set of the AI Challenger Competition in 2018, with 27 disease images of 10 crops. In this paper, the Inception-ResNet-v2 model is used for training. The cross-layer direct edge and multi-layer convolution in the residual network unit to the model. After the combined convolution operation is completed, it is activated by the connection into the ReLu function. The experimental results show that the overall recognition accuracy is 86.1% in this model, which verifies the effectiveness. After the training of this model, we designed and implemented the Wechat applet of crop diseases and insect pests recognition. Then we carried out the actual test. The results show that the system can accurately identify crop diseases, and give the corresponding guidance.

Heterogeneous catalysis is promising for water treatment. Solid catalysts play governing roles. Herein, the surface-disordered WO3, D-WO3, engineered with surface and sub-surface defective sites from NaBH4 reduction was proven to be an effective catalyst for H2O2 activation. The defective degree and defects amount on WO3 were regulated by NaBH4. More than 95% of two typical azo dyes, RhB and MG, were selectively degraded in D-WO3/H2O2 system during 3.0 h, while no significant activity was observed for MO as well as bisphenol A, roxarsone, phenol, 4-chlorophenol, p-nitrophenol, o-aminophenol, urea, and 2,4-dichlorophenol in comparison under the identical conditions (mainly less than 20%). Both ESR and radical scavenging tests indicated the minor role of ·OH from H2O2 activation on D-WO3. The superior activity of D-WO3 could be mainly attributed to the surface and sub-surface defects with finely tailored local atomic configurations and electronic structures of central metal sites. Surface and sub-surface defective sites could serve as the reactive sites of interfacial adsorption, dissociative activation, and catalytic decomposition for both oxidant and pollutants, with high adsorption energy, strong structural activation, and superior catalytic activity. Our findings provided a new chance for non-selective radical catalysis based on transition metal oxides and a promising catalyst with high performance, low cost, and no toxicity for pollutant degradation with weak matrix effects in wastewater and surface water.

This article has been retracted, and the online PDF has been watermarked “RETRACTION”. The retraction notice is available at http://doi.org/10.3233/MGC-220954.

Recycling of deactivated palladium (Pd)-based catalysts can not only lower the economic cost of their industrial use but also save the cost for waste disposal. Considering that the sulfur-poisoned Pd (Pd

Peri-procedural myocardial injury (PMI) is a common complication of percutaneous coronary intervention (PCI), which cannot be entirely avoided using available treatments. The findings of earlier research have shown that Shen-Yuan-Dan (SYD) capsules, a traditional Chinese medicine, can potentially alleviating PMI. This study aimed to confirm further this hypothesis in a rigorous, well-designed randomized controlled study.Our clinical trial was randomized, double-blinded, and placebo-controlled. A total of 181 patients with unstable angina (UA) undergoing elective PCI were randomized to pretreatment with SYD or a placebo under the basis of conventional treatment; 87 patients were pretreated with SYD (4 capsules, 3 times a day, with a further 4 capsules 2 h before PCI) 3 days before the procedure, and 94 patients were given a placebo. No patients received reloading statins before PCI, and SYD or placebo was maintained for 1 month after PCI. The primary endpoint was the incidence of PMI. The secondary endpoint was calculating the incidence rate of all 30-day major adverse cardiovascular events (all-cause mortality, non-fatal myocardial infarction, unplanned revascularization). The safety outcomes, including abnormalities in electrocardiogram and serum biochemical examinations caused by drug use, were also tested.The levels of creatine kinase-myocardial band (CK-MB) in both the SYD and placebo groups were increased at 4 h and 24 h after PCI compared with before the procedure (P 0.05). The incidence rate of PMI in the SYD group (10.3 %) was lower than that in the placebo group (34 %) (absolute difference, 23.7 % [95 % CI, 11.7-34.8 %], P 0.01). After taking SYD, the relative risk reduction (RRR) and absolute risk reduction (ARR) were 69.7 % and 24.3 %, respectively; further, number needed to treat (NNT) was 4.2. The 30-day major adverse cardiovascular event (MACE) rate was not statistically different between the SYD and placebo groups (6.9 % vs. 9.6 %, P = 0.352). There were no abnormal situations during the trial.These findings showed that pretreatment with SYD could safely reduce the incidence rate of PMI in patients with UA undergoing elective PCI. Further study on the effects of SYD and how it can improve adverse cardiovascular events outcomes is needed.

Citrus reticulata, has been used for various diseases such as cough. According to previous studies, the essential oil of C. reticulata (CREOs) have been shown to be effectively alleviate depression-like behaviors in mice. This study is aimed to investigate the antidepressant-like effect of CREOs in the rapid reserpine-induced depression model mice as well as its possible mechanisms. The experiment was conducted in six groups, each with four mice. The essential oil group and the control group were administered by sniffing (1h/d), while the reserpine group and fluoxetine group by intraperitoneal injection. Body weight, forced swimming test (FST) and tail suspension test (TST) were used to assess depressive behavior. The compositions and contents of CREOs were analyzed by GC-MS. The results indicated that reserpine could reduce the weight of mice and prolong the immobility time of FST and TST. Moreover, the level of 5HT-1A, GR and Nissl bodies in the brain tissue were significantly reduced, while the level of BDNF was increased in reserpine-treated mice. The administration of CREOs could effectively inhibit the weight loss and the prolongation of immobility time caused by reserpine. In addition, the treatment of CREOs has also been shown to reverse the changes in Nissl body, 5-HT, GR and BDNF levels. Limonene was the main active component of CREOs and might be related to the reduction of BDNF. By up-regulating the level of BDNF, CREOs could regulate the hyperexcitability of the HPA axis, thereby increasing the level of neurotransmitters and restoring neurons.

Heterogeneous Fenton-like catalysis mediated by solid catalyst is a promising oxidation technology for water purification. The redox reactivity, cost-effectiveness, and environmental compatibility of solid catalyst play governing roles in oxidant activation, radical generation, and pollutant degradation. Herein, the surface-disordered WO

Bisphenol A (BPA) is a semi-persistent environmental endocrine disrupter and widely present in aqueous environments. Electrochemical detection is an effective method to monitor pollutants like BPA in aqueous environments. However, the electrode fouling from anodic polymeric products is one main barrier of electrochemical sensors for their practical applications. In this work, a renewable electrochemical sensor was rationally designed, constructed and tested for efficient BPA detection. The TiO2 anodic material was surface-engineered by inorganic-framework molecular imprinting sites with tailored morphological shape, exposed facet and crystal structure. This electrode could be activated mainly as an electrochemical catalyst and partially as a photochemical catalyst. The developed TiO2-based sensor exhibited a good detection reliability and cyclic stability for determining BPA in water samples, with an electrochemical signal decrease of less than 5.0% in 10-run cyclic tests. By virtue of the bi-functional properties of the tailored TiO2 anodic material, a unique photo-assisted electrochemical sensor was further developed, in which analyte digestion and analytical signal originated mainly from anodic conversion. Such a synergistic digesting mechanism distinguishes it from the reported electro-assisted photochemical TiO2 sensors. Our work provides a robust sensor for monitoring pollutants in aqueous environments and a new opportunity to develop renewable electrode materials with good reusability.

The electrode is the key in electrochemical process for water and wastewater treatment. Many nonstoichiometric metal oxides are active electrode materials but have poor stability under strong anodic polarization due to their susceptible nature of the oxygen vacancies on surface and subsurface as defective reactive sites. In this work, a novel photochemical protecting strategy is proposed to stabilize the defective reactive sites on the TiO2- x surface and subsurface for long-term anodic oxidation of pollutants. With this strategy, a novel photoassisted electrochemical system at low anodic bias is further constructed. Such a system exhibits a high protecting capacity at a low operation cost for electrochemical degradation of bisphenol A (BPA), a typical persistent organic pollutant. Its excellent photochemical protecting capacity is found to be mainly attributed to the mild non-band-gap excitation pathways on the defective TiO2- x electrode under both visible-light irradiation and moderate anodic polarization. Under real sunlight irradiation, a 20 run cyclic test for BPA degradation demonstrates the excellent performance and stability of the constructed system at low bias without significant oxygen evolution. Our work provides a new opportunity to utilize the defective and reactive TiO2- x for efficient, stable, and cost-effective electrochemical water treatment with the aid of its photo- and electrochemical bifunctional properties.

Early warning of gas in deepwater drilling risers is critical to the timely detection of seepage and consequently blowout reduction. We numerically simulate the acoustic field in water-based drilling fluids from a sound source outside the riser by using a 3D cylindrical coordinates finite-difference method. By changing the gas content of the drilling fluid, the relation between the amplitude and attenuation of the A0- and the S0-mode Lamb waves in the riser, the fluid properties in the pipe, and the position of the top and bottom interfaces of the slug flow were assessed. The simulation results suggests that the amplitude and attenuation of the Lamb waves reflect the gas content in the riser and are sensitive to low gas content. Moreover, the Lamb waves amplitude and attenuation reflect the position of the top and bottom interface of the slug flow.

Sulfate radical (SO4 −) based oxidation is an efficient and selective strategy for environmental decontamination. Herein, we confirmed, for the first time, that the fine modulation on semiconducting TiO2 was able to improve the redox-cycling capability for heterogeneous peroxydisulfate (PDS, S2O82−) activation and radicals generation. PDS activation by defective TiO2−x exposed by high-energy {0 0 1} polar facets was a superior Fenton-like catalytic system for rhodamine B (RhB) and bisphenol A (BPA) degradation, with good activity and selectivity under neutral pH. By radical inhibiting tests with two different scavengers, fluorescence measurements with terephthalic acid and electron paramagnetic resonance (EPR) technique, only the SO4 − was identified to be the main reactive species from PDS activation on defective TiO2−x for pollutants degradation. Compared to the reported TiO2−x/H2O2 system, the proposed TiO2−x/PDS system exhibited much lower water matrix effects in the presence of four typical anions, natural organic matters and real surface water for target pollutants degradation. The selective SO4 −-mediated TiO2−x/PDS catalytic system in natural water matrix and the no toxicity of catalytic material were of considerable interest for practical environmental applications with highly complex chemistry. Our findings elucidated a new strategy for efficient and selective PDS activation based on the defect-related chemistry, which can degrade environmental contaminants and remedy contaminated soil based on sulfate components with much reduced matrix effects.

Mg–Al, Zn–Al and Mg–Fe magnetic layered double hydroxide (LDH) adsorbents were synthesized. The adsorption effect and influencing factors of these adsorbents were explored, and the adsorption mechanism of phosphorus was studied with advanced instruments. The results showed that the best adsorption performance was observed when the molar ratio of metals was 3 for the magnetic LDH adsorbents, and the maximum adsorption amount for phosphorus was 74.8, 80.8 and 67.8 mg/g for Mg–Al, Zn–Al and Mg–Fe LDHs, respectively. Pseudo-second-order kinetics could be used to describe the adsorption process of phosphorus onto the magnetic LDHs. The adsorption of phosphorus onto the magnetic LDHs was an exothermic process. Lower temperatures were favourable for adsorption, and the adsorption of phosphorus onto the magnetic LDHs was a spontaneous process. When the solid–liquid ratios were 0.10 g/L, 0.10 g/L and 0.05 g/L for Mg–Al, Zn–Al and Mg–Fe magnetic LDHs, respectively, the highest adsorption amount of phosphorus was achieved for each magnetic LDH. The maximum adsorption amount was observed at pH values of 6.0–8.0. The inhibitory effect of HCO3− on the adsorption capacity of phosphorus onto the magnetic LDHs was the strongest at a higher HCO3− concentration level. The relative content of –OH significantly reduced after adsorption of phosphorus by the FTIR analysis, which indicated that the mechanism of phosphorus removal was mainly through the exchange between hydroxyl on the adsorbent surface and phosphorus in water. XPS studies showed that oxygen provided electrons during the adsorption of phosphorus.

The efficient recycling of agricultural chestnut shell waste is of considerable interest due to its large availability and economic feasibility. Herein, an alkaline-activated biochar was thermally prepared using chestnut shell by finely regulating main conditions; its morphological, structural and physic-chemical properties were well characterized. Fenton-like capacity to trigger peroxymonosulfate activation for superior pollutant degradation with high efficiency and good selectivity was validated in different water matrix. Both radical formation and electron transfer were identified as reaction pathways, while the selective non-radical mechanism played the major role in pollutant degradation. Surface ketonic groups were identified as the main reactive sites for non-selective radical production, while crystal edges and structural defects on sp

Summary Here, we describe a detailed protocol for the isolation of purified populations of viable spermatogenic cells derived from the non-human primate model organism Macaca fascicularis (cynomolgus). Using fluorescence-activated cell sorting (FACS), we describe methods to isolate spermatogonia and primary spermatocytes ranging across the sub-stages of meiosis prophase I. These cell populations can be used with a variety of downstream assays, including single-cell approaches such as RNA sequencing, chromatin immunoprecipitation, quantitative RT-PCR, and immunocytochemistry. For complete details on the use and execution of this protocol, please refer to Lau et al. (2020)., Graphical abstract, Highlights • Dissection of macaque testis and dissociation of tissue to single cells • Isolation of primary spermatocytes with FACS using Hoechst 33342 fluorescence • Sample preparation and gating strategy for obtaining SSEA-4-positive spermatogonia, Here, we describe a detailed protocol for the isolation of purified populations of viable spermatogenic cells derived from the non-human primate model organism Macaca fascicularis (cynomolgus). Using fluorescence-activated cell sorting (FACS), we describe methods to isolate spermatogonia and primary spermatocytes ranging across the sub-stages of meiosis prophase I. These cell populations can be used with a variety of downstream assays, including single-cell approaches such as RNA sequencing, chromatin immunoprecipitation, quantitative RT-PCR, and immunocytochemistry.

Agricultural diseases and insect pests are one of the most important factors that seriously threaten agricultural production. Early detection and identification of pests can effectively reduce the economic losses caused by pests. In this paper, convolutional neural network is used to automatically identify crop diseases. The data set comes from the public data set of the AI Challenger Competition in 2018, with 27 disease images of ten crops. In this paper, Inception-ResNet-v2 model is used for training. The experimental results show that the overall recognition accuracy is 86.1%. The experimental results verify the effectiveness of the proposed model.

Organic Fenton-like catalysis has been recently developed for water purification, but redox-active compounds have to be ex situ added as oxidant activators, causing secondary pollution problem. Electrochemical oxidation is widely used for pollutant degradation, but suffers from severe electrode fouling caused by high-resistance polymeric intermediates. Herein, we develop an in situ organic Fenton-like catalysis by using the redox-active polymeric intermediates, e.g., benzoquinone, hydroquinone, and quinhydrone, generated in electrochemical pollutant oxidation as H(2)O(2) activators. By taking phenol as a target pollutant, we demonstrate that the in situ organic Fenton-like catalysis not only improves pollutant degradation, but also refreshes working electrode with a better catalytic stability. Both (1)O(2) nonradical and ·OH radical are generated in the anodic phenol conversion in the in situ organic Fenton-like catalysis. Our findings might provide a new opportunity to develop a simple, efficient, and cost-effective strategy for electrochemical water purification.

Glabridin, a compound of the flavonoid, has shown outstanding skin-whitening and anti-aging properties, but its water insolubility limits its wide application. Therefore, glabridin liposome (GL) has been developed to improve its poor bioavailability, while there are few studies to evaluate its amelioration of UVB- induced photoaging. This study is performed to investigate the amelioration of GL against UVB- induced cutaneous photoaging. The prepared GL has a spheroidal morphology with an average diameter of 200 nm. The GL shows lower cytotoxicity than glabridin, but it has a more effective role in inhibition of melanin. Moreover, the application of GL can effectively relieve UV radiation induced erythema and leathery skin, associated with the down-regulated expression of inflammatory cytokines (TNF-α, IL-6 and IL-10). Taken together, these results demonstrate that GL has potentials as topical therapeutic agents against UVB radiation induced skin damage through inhibiting inflammation.

Utilising the general waste such as non-burning brick as raw materials to prepare low-cost zeolite is in line with the green chemical industry and can achieve the purpose of treating waste with waste. Here we use the abandoned non-burning brick powder as raw material, the sulfhydryl functionalized magnetic zeolite composites (MZ-SH) were prepared by combining a series of methods such as hydrothermal synthesis, high temperature melting magnetization, and grafting technology. The samples were characterized by SEM, EDS, XRD, XPS, and FT-IR. The adsorption behavior of MZ-SH on uranyl ions was systematically studied. The results show that the equilibrium adsorption capacity of MZ-SH to uranium(VI) ions was 1285.86 mg/g under the optimal adsorption conditions with t of 270 mins, T at 35 ℃, C0 being 35 mg/L, pH at 6.0, and m by 0.025 g/L. Its adsorption isotherm complies with the Langmuir adsorption model, while the adsorption kinetics conforms to the quasi-second-order adsorption kinetic model. The adsorption type is mainly chemical adsorption with type of monolayer distribution on the surface. Adsorption thermodynamics shows that the adsorption process was spontaneous at 25–45 ℃. FT-IR and XPS analysis showed that sulfhydryl, –OH, Al-O and Si-O played an important role in the adsorption process of uranium (VI) ions by MZ-SH. It indicates that the uranium(VI) ions prefer binding with –OH and sulfhydryl groups and there is also showing ion exchange between uranium(VI) ions and Al-O and Si-O groups.

To evaluate the effect of Danhong Injection (, DH) on the index of microcirculatory resistance (IMR) and myocardial injury in patients with unstable angina undergoing elective percutaneous coronary intervention (PCI).Seventy-eight patients with unstable angina were randomly divided into DH group (39 cases) and the control group (39 cases) during elective PCI. Randomization was performed using a random-number table. The DH group received DH at a dosage of 40 mL (mixed with 250 mL saline, covered by a light-proof bag, intravenous drip) during PCI and daily for 7 consecutive days, while the control group only received the same dosage of saline. Both groups received standardized treatment. The IMR and fractional flow reserve (FFR) were measured at maximal hyperemia before and after PCI. Myocardial markers, including myoglobin, creatine kinase (CK), creatine kinase MB (CK-MB), and coronary troponin T (cTnT) values were measured at baseline and 24 h after PCI.Among the 78 patients enrolled, the baseline and procedural characteristics were similar between the two groups. There was no significant difference in pre-PCI myocardial markers and coronary physiological indexes between the two groups. However, post-PCI CK and CK-MB levels in the DH group were significantly lower than those in the control group (111.97 ± 80.97 vs. 165.47 ± 102.99, P=0.013; 13.08 ± 6.90 vs. 19.75 ± 15.49, P=0.016). Post-PCI myoglobin and cTNT-positive tend to be lower in the DH group than in the control group but did not reach statistical significance (88.07 ± 52.36 vs. 108.13 ± 90.94, P=0.52; 2.56% vs.7.69%, P=0.065). Compared with the control group, the post-IMR levels of the DH group tended to decrease, but there was no statistical difference (20.73 ± 13.15 vs. 26.37 ± 12.31, P=0.05). There were no statistical differences in post-FFR in both groups. The peri-procedural myocardial injury of the DH group was significantly lower than that of the control group (2.56% vs. 15.38%, P=0.025). During the 30-d follow-up period, no major adverse cardiovascular events occurred in either group.This study demonstrated benefit of DH in reducing myocardial injury and potential preserving microvascular function in patients with unstable angina undergoing elective PCI.

Photochemical oxidation is able to effectively regenerate the fouled electrode in electrochemical pollutant monitoring, while its regeneration capacity is limited by the surface-bound hydroxyl radical speciation with low activity and mobility, which is attributed to the dissociated water adsorption on hydrophilic metal oxides. In this work, fluorine-terminated {001}-exposed TiO

This study investigated the hydration mechanism of gypsum–slag cement gel. Experimental results indicated that products of hydration of gypsum slag cement gel materials were predominantly z...

Photochemical oxidation based on semiconducting metal oxides is an efficient strategy to remove environmental pollutants in water, air and soil. The fine manipulation of photo-carriers separation, surface chemistry and radical speciation is of considerable interest for environmental remediation. In this work, the morphology- and structure-tailored TiO

Organoarsenicals are widely used as antibiotics in the livestock industry and largely discharged into water environment directly, their safe, efficient and cost-effective treatment are actively perused. Herein, a heterogeneous iron-based Fenton-like technology was designed and validated with much reduced secondary pollution, mainly attributed to the bi-functional properties of both Fenton-active and arsenic-affinitive iron oxides. This simple one-step strategy not only exhaustively degraded organoarsenicals, but also selectively adsorbed the released high-toxicity arsenic from treated water. With Roxarsone as target, the FeOOH-based Fenton-like system exhibited a much superior capacitie for both Roxarsone degradation and arsenic adsorption in various water matrices, compared to typical homogeneous systems under similar conditions. More than 80% of Roxarsone was degraded after 3.0 h, and most of the released AsO43− was removed simultaneously, without any additional post-treatment. The superior capacity of FeOOH might be mainly attributed to its strong redox-cycling capacity of surface central Fe atoms from their thermodynamically favorable electronic structure. Taking the important advantages of iron oxides and Fenton technology into account, our findings might provide a new chance to develop simple and efficient technologies for organoarsenicals removal from water with much reduced secondary pollution at a low cost.

Noble metals, nanostructured carbon, and their hybrids are widely used for electrochemical detection of persistent organic pollutants. However, despite of the rapid detection process and high accuracy, these materials generally suffer from high costs, metallic impurity, heterogeneity, irreversible adsorption and poor sensitivity. Herein, the high-energy {001}-exposed TiO2 single crystals with specific inorganic-framework molecular recognition ability was prepared as the electrode material to detect bisphenol A (BPA), a typical and widely present organic pollutant in the environment. The oxidation peak current was linearly correlated to the BPA concentration from 10.0 nM to 20.0 μM (R2 = 0.9987), with a low detection limit of 3.0 nM (S/N = 3). Furthermore, it exhibited excellent discriminating ability, high anti-interference capacity, and good long-term stability. Its good performance for BPA detection in real environmental samples, including tap water, lake and river waters, domestic wastewater, and munic...

Co3O4-mediated heterogeneous activation of peroxymonosulfate (PMS) is an efficient strategy to generate sulfate radicals for environmental pollutants degradation. The rate-limiting step is Co OH− complex formation, and it highly depends on the thermodynamic capacity of water dissociation to generate surface hydroxyl groups. Herein, for efficient PMS activation and pollutants degradation, the water dissociation capacity of TiO2, a promising Co3O4 support, was facilely refined by its shape-tailored synthesis with dominant high-energy {0 0 1} facet. The polar {0 0 1} facet is characterized by a high density of atomic steps, edges and kinks of the low-coordinate surface atoms with a large number of dangling bonds, all of which can serve as reactive sites for water adsorption and dissociation and thus improve Co OH− complex formation dynamics in sulfate radical formation. Co3O4 deposited on TiO2-{0 0 1} exhibited a much higher PMS activation capacity and pollutants degradation efficiency, i.e. p-nitrophenol and rhodamine B, and a much lower Co2+ leaching. This superiority could be mainly attributed to the strong Ti5c-centered water adsorption and dissociation, the high density of surface hydroxyl groups, the robust Co OH− complex generation and the intimate catalyst-support interactions. Our findings might provide a new chance to refine Co-mediated sulfate radical generation and other Fenton-like systems for advanced water treatment with reduced secondary pollution.

Considering the uncertainty of the electrical axis for two-dimensional audo-magnetotelluric (AMT) data processing, an AMT inversion method with the Central impedance tensor was presented. First, we present a calculation expression of the Central impedance tensor in AMT, which can be considered as the arithmetic mean of TE-polarization mode and TM-polarization mode in the two-dimensional geo-electrical model. Second, a least-squares iterative inversion algorithm is established, based on a smoothness-constrained model, and an improved L-curve method is adopted to determine the best regularization parameters. We then test the above inversion method with synthetic data and field data. The test results show that this two-dimensional AMT inversion scheme for the responses of Central impedance is effective and can reconstruct reasonable two-dimensional subsurface resistivity structures. We conclude that the Central impedance tensor is a useful tool for two-dimensional inversion of AMT data.

Metal oxide semiconductors with surface homojunctions characteristic of continuous band bending and well-defined epitaxial interfaces show amazing potential for photocatalytic applications. Herein, a new concept of facet junctions is proposed and validated according to the synergy between the co-exposed crystal facets of shape-tailored anatase TiO2 single crystals. By considering the atomic and electronic interactions between the co-exposed facets, our density functional theory calculations reveal the existence of type-II band alignment between the co-exposed {001} and {101} facets. This band alignment results in in situ construction of a facet junction to allow built-in facet-mediated carrier transfer. The self-constructed {101}/{001} facet junction, due to the effective carrier separation between different exposed facets, exhibits a significantly enhanced quantum efficiency and catalytic performance in photochemical hydrogen generation compared to TiO2 poly-crystals. These findings open a new horizon of facet junction-engineered nano-catalysts for more robust and efficient energy and environmental applications.

Electrochemical degradation of refractory pollutants at low bias before oxygen evolution exhibits high current efficiency and low energy consumption, but its severe electrode fouling largely limits practical applications. In this work, a new antifouling strategy was developed and validated for electrochemical pollutant degradation by photochemical oxidation on facet-tailored {001}-exposed TiO2 single crystals. Electrode fouling from anodic polymers at a low bias was greatly relieved by the free ·OH-mediated photocatalysis under UV irradiation, thus efficient and stable degradation of bisphenol A, a typical environmental endocrine disrupter, and treatment of landfill leachate were accomplished without remarkable oxygen evolution in synergistic photoassisted electrochemical system. Electrochemical and spectroscopic measurements indicated a clean electrode surface during cyclic pollutant degradation. Such a photochemical antifouling strategy for low-bias anodic pollutants degradation was mainly attributed to...

Visible-light-driven photocatalysis is a promising technology for advanced water treatment, but it usually exhibits a low efficiency. Cu2O is a low-cost semiconductor with narrow band gap, high absorption coefficient and suitable conduction band, but suffers from low charge mobility, poor quantum yield and weak catalytic performance. Herein, the Cu2O catalytic capacity for refractory pollutants degradation is drastically improved by a simple and effective strategy. By virtue of the synergistic effects between photocatalysis and Fenton, a novel and efficient photocatalysis-driven Fenton system, PFC, is originally proposed and experimentally validated using Cu2O/Nano-C hybrids. The synergistic PFC is highly Nano-C-dependent and exhibits a significant superiority for the removal of rhodamine B and p-nitrophenol, two typical refractory pollutants in wastewater. The PFC superiority is mainly attributed to: (1) the rapid photo-electron transfer driven by Schottky-like junction, (2) the selective O2 reduction mediated by semi-metallic Nano-C for efficient H2O2 generation, (3) the specific H2O2 activation and large OH generation catalyzed by Haber-Weiss Fenton mechanism, and (4) the accelerated Fe2+/Fe3+ cycling and robust Fe2+ regeneration via two additional pathways. Our findings might provide a new chance to overcome the intrinsic challenges of both photocatalysis and Fenton, as well as develop novel technology for advanced water treatment.

Heterogeneous catalysis is promising for water treatment. Solid catalysts play governing roles. Herein, the surface-disordered WO

The electrode is the key in electrochemical process for water and wastewater treatment. Many nonstoichiometric metal oxides are active electrode materials but have poor stability under strong anodic polarization due to their susceptible nature of the oxygen vacancies on surface and subsurface as defective reactive sites. In this work, a novel photochemical protecting strategy is proposed to stabilize the defective reactive sites on the TiO

Electrochemical oxidation is widely used for water and wastewater treatment. Anodic material is crucial and the shape-tailored {001}-exposed TiO

Bisphenol A (BPA) is a semi-persistent environmental endocrine disrupter and widely present in aqueous environments. Electrochemical detection is an effective method to monitor pollutants like BPA in aqueous environments. However, the electrode fouling from anodic polymeric products is one main barrier of electrochemical sensors for their practical applications. In this work, a renewable electrochemical sensor was rationally designed, constructed and tested for efficient BPA detection. The TiO

Summary: Here, we describe a detailed protocol for the isolation of purified populations of viable spermatogenic cells derived from the non-human primate model organism Macaca fascicularis (cynomolgus). Using fluorescence-activated cell sorting (FACS), we describe methods to isolate spermatogonia and primary spermatocytes ranging across the sub-stages of meiosis prophase I. These cell populations can be used with a variety of downstream assays, including single-cell approaches such as RNA sequencing, chromatin immunoprecipitation, quantitative RT-PCR, and immunocytochemistry.For complete details on the use and execution of this protocol, please refer to Lau et al. (2020).