Search

The generator voltage of a cutting-edge wind turbine generation system (WTGS) is expected to increase from the conventional low-voltage level of 690 V to a medium-voltage level of 6.6 kV with a power level up to 10 MW without the application of a parallel connection of multiple power units. On the other hand, it is difficult to use a conventional two-level or three-level converter in a WTGS with a dc-link voltage of 10–13 kV owing to the limitations on the voltage ratings of power devices. This paper presents a 10-MW WTGS consisting of a three-phase open-winding synchronous generator equipped with six lead terminals and a modular multilevel cascade converter (MMCC) formed by three identical subconverters. The MMCC carries out direct ac/ac power conversion from three single-phase voltages with a time-varying frequency (from the generator) to a three-phase voltage with a line frequency of 50 Hz. This paper discusses the operating principles and control methods for the WTGS, followed by simulations using the software package PSCAD/EMTDC. The experimental result obtained from a 200 V 6-kW downscaled system confirms the reliability of simulation results of the complete three-phase system.

This paper provides theoretical and experimental discussions on an optimal carrier frequency for a phase-shifted pulsewidth modulation modular multilevel cascade converter for grid connections. The theoretical discussion concludes that a ratio of the optimal carrier frequency with respect to the supply (ac) frequency is 5/2. A three-phase downscaled front-to-front system is designed, constructed, and tested to confirm validity of the theoretical discussion. It consists of a pair of three-phase modular multilevel cascade converters rated at 400 Vdc and 10 kW, where the carrier frequency is set to 450 Hz and the ac frequency to 180 Hz, that is, their ratio is equal to 5/2. Moreover, simulated waveforms are compared to experimental ones under the same operating conditions. Both experimental and simulated waveforms agree well with each other not only in steady states but also in transient states.

This paper provides an intensive discussion on analysis, simulation, and experiment of a back-to-back (BTB) system unifying two modular multilevel cascade converters based on double-star chopper cells (MMCCs-DSCCs). Each of the two DSCCs connected back-to-back consists of multiple cascaded chopper cells and a center-tapped inductor per leg. Low voltage steps bring significant reductions in harmonic voltage and current to the BTB system. Neither dc-link capacitor nor voltage sensor is required for regulating the dc-link voltage and controlling the dc-link current. A three-phase 200-V, 10-kW, 50-Hz downscaled BTB system with phase-shifted PWM is designed, constructed, and tested to verify its operating principles and performance. Analytical, simulated, and experimental results agree well with each other in steady and transient states. Experimental waveforms confirm the effectiveness of a self-starting/restarting procedure.

This paper presents a 4 kW, 450 kHz voltage-source inverter with a series resonant circuit for induction melting applications, which is characterized by the power control based on pulse density modulation (PDM). The pulse-density-modulated inverter makes an induction melting system simple and compact, thus leading to higher efficiency. A modulation strategy is proposed to realize the induction melting system capable of operation at the frequency and power level of interest. Some interesting experimental results are shown to verify the validity of the concept

This paper describes the design and construction of a 320-V, 12-F EDLC energy storage bank connected to a bidirectional isolated DC-DC converter. A trade-off between two types of EDLC bank configurations is considered with focus on voltage balancing circuits. This paper also proposes a center-tapped-transformer voltage balancing circuit for the EDLC bank, and includes its experimental verifications. Following that, the experimental charge-discharge characteristics of the EDLC energy storage system, along with a self-starting result is discussed. The power loss in the voltage balancing circuit in the charge-discharge operation is found to be negligibly small. An observed low ripple current flowing into the EDLC bank is also theoretically analyzed.