Search

The identification and analysis of the composition of glass artefacts can support the related fields in exploring the history of glass and its processes, as well as the development and progress of glass composition. This paper identifies and analyses the composition of glass artefacts by collecting relevant data and information on glass artefacts through the Spearman correlation coefficient method and fuzzy correlation. In terms of data pre-processing, data with component ratios that did not add up to between 85% and 105% were removed, and then the degree of weathering on the surface of the glass artefacts was initially determined to be closely related to the glass type by applying a chi-square test, and then the highest correlation between the weathered surface of the glass and the glass type was determined by excluding possible interference caused by ornamentation and colour through partial correlation analysis. Fuzzy correlation analysis was then applied to remove abnormal data and calculate the mean values of each chemical composition for different types of glass at different degrees of weathering to discover statistical patterns. Finally, the mean values calculated by the fuzzy correlation analysis were summed using the difference to obtain the predicted results. Six chemical components were also screened out by the Spearman correlation coefficient method, and then the difference quotients of the same components were calculated by averaging these six components for different types of glass respectively. Finally, it was found that in addition to the three elements of potassium, lead and barium, calcium and strontium also have a greater influence on glass classification. The sample data were then clustered by the hierarchical clustering method based on the correlation coefficient method of calculating distances, and the optimal number of clusters was found by calculating the clustering contour coefficients. Then, the data of the clustered subclasses were analysed and subclasses such as soda-lime glass, sulphide glass and aluminosilicate glass were classified. Finally, the clustering clarity values were defined using the entropy weighting method to measure the clustering results, and the Held mean values at different p-values were adjusted for sensitivity analysis of the clustering clarity values.

The analysis of the composition of glass artifacts has always been the focus of research in related fields. By analyzing and identifying the different compositions of glass artifacts from different eras and fields can support the understanding of the history of glass artifacts, their achievements and thus their exit from human civilization. In this paper, we use multiple correlation analysis, kernel principal component analysis, BP neural network model optimized by PSO particle swarm algorithm to study the composition of ancient glass artifacts.To address the shortcomings of the conventional BP neural network model, this paper adopts the BP neural network model under the optimization of PSO particle swarm algorithm to identify and study the unknown artifact types. And different subjective assignments are made to glass artifacts with different weathering degrees to discover the level of model sensitivity.Then the S-W normal distribution test was used and it was found that most of the chemical components did not obey normal distribution. Therefore, nuclear principal component analysis was chosen to find out the correlation between different types of components. On the basis of the identified two correlation coefficients and the paired data were normally distributed, by paired sample t-test, it was found that the magnitude of the differences between the chemical components of different categories was large. This was supplemented by correlation analysis and kernel principal component analysis. Finally, the composition identification study of glass artifacts was realized, which provided a new methodological path for the composition study of glass artifacts.

Previous studies have identified several ICAM3 transcript variants and mainly investigated the function of the longest transcript of ICAM3 in various tumor progressions. However, the role of the other ICAM3 transcript variants remains unclear. Herein, we detected the expression of ICAM3 transcript variants 1-4 in DLBCL cells and tumor tissues, disclosed that variants 1, 3, and 4 were expressed in normal B cell lines and 3 DLBCL cell lines except SU-DHL-2 as well as tumor tissues, while variant 2 was not detected. Moreover, we found that ectopic expression of variants 1-4 enhanced cell proliferation by accelerating the cell cycle in SU-DHL2 cells

Pig is usually the carrier of Salmonella and Staphylococcus aureus, and can transmit the bacteria along the pork production chain to cause severe public health problems. In this study, we investigated the prevalence of Salmonella and S. aureus in fattening pigs in Hubei Province, China. The overall prevalence of Salmonella in rectal swab among 896 samples from 22 farms was 17.30%, and that of S. aureus in nasal swab among 814 samples from 20 farms was 28.26%. Antimicrobial resistance (AMR) analysis showed that 95.33% of the Salmonella strains exhibited resistance to more than three classes of antimicrobial agents tested. The highest resistance proportions were for chloramphenicol (100%), sulfamethoxazole/trimethoprim (SXT) (100%), and tetracycline (TET) (93.46%), while the lowest proportions were for cefotaxime (37.38%), gentamicin (GEN) (34.58%), and ciprofloxacin (24.30%). On the other hand, 98.42% of the S. aureus strains were resistant to more than three classes of antimicrobial agents tested. The most common resistance among the S. aureus strains was against SXT (100.00%), followed by TET (98.43%), erythromycin (91.34%), and clindamycin (91.34%), while the lowest frequent resistances were against GEN (34.65%) and oxacillin (16.54%). The prevalence and AMR of Salmonella and S. aureus exhibited an obvious diversity among different pig farms. Our results provided the epidemiological data for risk analysis of foodborne bacteria and AMR in pig farms.

The formation of underground stem bulblets in lilies is a complex biological process which is key in their micropropagation. Generally, it involves a stem-to-bulblet transition; however, the underlying mechanism remains elusive. It is important to understand the regulatory mechanism of bulblet formation for the reproductive efficiency of Lilium. In this study, we investigated the regulatory mechanism of underground stem bulblet formation under different conditions regarding the gravity point angle of the stem, i.e., vertical (control), horizontal, and slanting. The horizontal and slanting group displayed better formation of bulblets in terms of quality and quantity compared with the control group. A transcriptome analysis revealed that sucrose and starch were key energy sources for bulblet formation, auxin and cytokinin likely promoted bulblet formation, and gibberellin inhibited bulblet formation. Based on transcriptome analysis, we identified the

Previous studies have reported that TIFA plays different roles in various tumor types. However, the function of TIFA in colorectal cancer (CRC) remains unclear. Here, we showed that the expression of TIFA was markedly increased in CRC versus normal tissue, and positively correlated with CRC TNM stages. In agreement, we found that the CRC cell lines show increased TIFA expression levels versus normal control. The knockdown of TIFA inhibited cell proliferation but had no effect on cell apoptosis in vitro or in vivo. Moreover, the ectopic expression of TIFA enhanced cell proliferation ability in vitro and in vivo. In contrast, the expression of mutant TIFA (T9A, oligomerization site mutation; D6, TRAF6 binding site deletion) abolished TIFA-mediated cell proliferation enhancement. Exploration of the underlying mechanism revealed that the protein synthesis-associated kinase RSK and PRAS40 activation were responsible for TIFA-mediated CRC progression. In summary, these findings suggest that TIFA plays a role in mediating CRC progression. This could provide a promising target for CRC therapy.

There are various risk factors in the application of BIM. The reasonable management of risk factors can avoid unnecessary cost losses. Based on a large amount of literature, the article combed out the 17 risk factors that existed in the operation and maintenance phase, and revised it through expert interview method, and then obtained 11 risk factors. Semi-structured interviews were used to investigate the relationship between risk factors, and established Interpretative Structural Modeling (ISM) to analyze the hierarchical relationship of risk factors, and got two surface risk factors, five middle risk factors, and four deep risk factors. Finally, relevant improvement suggestions are put forward to eliminate or reduce the risk of using BIM in the operation and maintenance phase.

The synergistic effect between MoOx and Fe markedly promoted the activity on deoxygenation of lactic acid to bio-propionic acid.

Monascus pigments (MPs) display many beneficial biological activities and have been widely utilized as natural food-grade colorants in the food processing industry. The presence of the mycotoxin citrinin (CIT) seriously restricts the application of MPs, but the gene regulation mechanisms governing CIT biosynthesis remain unclear. We performed a RNA-Seq-based comparative transcriptomic analysis of representative high MPs-producing Monascus purpureus strains with extremely high vs. low CIT yields. In addition, we performed qRT-PCR to detect the expression of genes related to CIT biosynthesis, confirming the reliability of the RNA-Seq data. The results revealed that there were 2518 differentially expressed genes (DEGs; 1141 downregulated and 1377 upregulated in the low CIT producer strain). Many upregulated DEGs were associated with energy metabolism and carbohydrate metabolism, with these changes potentially making more biosynthetic precursors available for MPs biosynthesis. Several potentially interesting genes that encode transcription factors were also identified amongst the DEGs. The transcriptomic results also showed that citB, citD, citE, citC and perhaps MpigI were key candidate genes to limit CIT biosynthesis. Our studies provide useful information on metabolic adaptations to MPs and CIT biosynthesis in M. purpureus, and provide targets for the fermentation industry towards the engineering of safer MPs production.

Coix lacryma-jobi L. is one of the most important economical and medicine corn. In this study, a high genetic linkage map has been constructed for Coix lacryma-jobi L. from a cross F2 community of “Qianyi NO.2” × “Wenyi NO.2” and their parents through high-throughput sequencing and specfic-locus amplified fragment (SLAF) library construction. After pre-processing, 325.49 Gb of raw data containing 1,628 M reads were obtained. A total of 22,944 high-quality SLAFs were detected, among which 3,952 SLAFs and 3,646 of the polymorphic markers could meet the requirements for construction of a genetic linkage map. The integrated map contains 3,605 high quality SLAFs, which are grouped to 10 genetic linkage groups. The total length of the linkage map is 1,620.39 cM with an average distance of 0.45 cM and 360.5 markers in average of per linkage group. This work will provide an important molecular biology basis for investigating their characteristics, gene cloning, molecular marker-assisted breeding, functional genomics and so on for Job’s tears.

In this work, the second harmonic generation (SHG) technique based on embedded piezoelectric (PZT) sensors is developed for the defect assessment of concrete samples. Three different imperfection f...

This paper presents the development of a nonlinear vibro-acoustic modulation technique based on non-contact piezoelectric sensors to detect the crack progression of concrete subjected to both mechanical and thermal load. Two types of crack are investigated in the work including the isolated single crack induced by the three point bending test and distributed mapping cracks caused by heating treatment. Experimental results show that the damage index defined in the air-coupled wave modulation method – ultrasonic nonlinear parameter presents a positive correlation with the growth of single crack in bending test and the accumulation of mapping crack in thermal test. The sensitivity of developed method is validated through a comparison between the ultrasonic nonlinear parameter and two traditional linear parameters namely the phase velocity of Rayleigh wave and resonance frequency of vibrations. X-ray Computed Tomography (CT) technique and three-dimensional (3D) image reconstruction method are used to visualize microstructure of thermal damage. The CT images show that proposed nonlinear parameter is reliable and well correlated with the microstructural defects of concrete specimen. The repeatability of the air-coupled method is better than the contact method because the coefficient of variation of non-contact measurements is averagely about 43.2% of the contact measurements. Due to the advantage of removable characteristic of non-contact ultrasonic measurements, the developed air-coupled nonlinear wave modulation method could be promising for fast damage assessment of concrete structures in engineering practice.

Background: Previous studies have shown that TIFA (TNF receptor associated factor (TRAF)-interacting protein with a Forkhead-associated (FHA) domain) plays different roles in various tumor types. However, the function of TIFA in colorectal cancer (CRC) remains unclear. The goal of this study is to uncover the biological function and molecular mechanism of TIFA in CRC.Methods: Tissue microarrays were used to evaluate TIFA expression. Cancer cell proferation assays were performed in TIFA knockdown and overexpressing cells in vitro and in a xenograft model in vivo. Human phosphokinase array, immunoprecipitation assays were performed to explore the underlying mechanism.Results: We disclosed that the expression of TIFA was marked increased in CRC versus normal tissue, and positively correlated with CRC TNM stages. In agreement, we found that the CRC cell lines show increased TIFA expression levels versus normal control. The knockdown of TIFA inhibited cell proliferation but have no effects on cell apoptosis in vitro and in vivo. Moreover, the ectopic expression of TIFA enhanced cell proliferation ability in vitro and in vivo. In contrast, the expression of mutant TIFA (T9A, oligomerization site mutation; D6, TRAF6 binding site deletion) alternatively abolished TIFA mediated cell proliferation enhancement. Exploration of the underlying mechanism demonstrated that the protein synthesis associated kinase RSK and PRAS40 activation were all responsible for TIFA mediated CRC progression. Conclusions: The above results described a model of TIFA in mediating CRC progression. This may provide a promising target for CRC therapy.

Pig is usually the carrier of

This paper details the design and implementation of the hardware circuit of the intelligent cart motion control system, and uses a variety of virtual reality and visual sensing technologies to design an environmental detection and search and rescue robot under complex conditions. Infrared technology is used to achieve the function of automatic obstacle avoidance of the trolley, ultrasonic technology is used to achieve the function of distance measurement, Bluetooth is used to achieve the function of wireless remote control of the trolley, GPS technology is used to display the geographical position of the trolley, a homemade bionic robotic arm is installed, and the robotic arm servo can be controlled by PC upper computer, Bluetooth and homemade body remote sensing controller to work to achieve the removal of obstacles and unknown environment and dangerous areas The information is collected through a PC, Bluetooth and a home-made body telemetry controller.

Plant diseases reduce crop yield and quality, hampering the development of agriculture. Fungicides, which restrict chemical synthesis, are the strongest controls for plant diseases. However, the harmful effects on the environment due to continued and uncontrolled utilization of fungicides has become a major challenge in recent years. Plant-sourced fungicides are a class of plant antibacterial substances or compounds that induce plant defenses. They can kill or inhibit the growth of target pathogens efficiently with no or low toxicity, degrade readily, do not prompt development of resistance, which has led to their widespread use. In this study, the growth inhibition effect of 24 plant-sourced ethanol extracts on rice sprigs was studied. Ethanol extract of gallnuts and cloves inhibited the growth of rice sprites by up to 100%. Indoor toxicity measurement results showed that the gallnut and glove constituents inhibition reached 39.23 μg/mL and 18.82 μg/mL, respectively. Extract treated rice sprigs were dry and wrinkled. Gallnut caused intracellular swelling and breakage of mitochondria , disintegration of nuclei, aggregation of protoplasts, and complete degradation of organelles in hyphae and aggregation of cellular contents. Protection of Rhizoctonia solani viability reached 46.8% for gallnut and 37.88% for clove in water emulsions of 1,000 μg/mL gallnut and clove in the presence of 0.1% Tween 80. The protection by gallnut was significantly stronger than that of clove. The data could inform the choice of plant-sourced fungicides for the comprehensive treatment of rice sprig disease. The studied extract effectively protected rice sprigs and could be a suitable alternative to commercially available chemical fungicides. Further optimized field trials are needed to effectively sterilize rice paddies.

Plant diseases reduce crop yield and quality, hampering the development of agriculture. Fungicides, which restrict chemical synthesis in fungi, are the strongest controls for plant diseases. However, the harmful effects on the environment due to continued and uncontrolled utilization of fungicides have become a major challenge in recent years. Plant-sourced fungicides are a class of plant antibacterial substances or compounds that induce plant defenses. They can kill or inhibit the growth of target pathogens efficiently with no or low toxicity, they degrade readily, and do not prompt development of resistance, which has led to their widespread use. In this study, the growth inhibition effect of 24 plant-sourced ethanol extracts on rice sprigs was studied. Ethanol extract of gallnuts and cloves inhibited the growth of bacteria by up to 100%. Indoor toxicity measurement results showed that the gallnut and glove constituents inhibition reached 39.23 μg/mL and 18.82 μg/mL, respectively. Extract treated rice sprigs were dry and wrinkled. Gallnut caused intracellular swelling and breakage of mitochondria, disintegration of nuclei, aggregation of protoplasts, and complete degradation of organelles in hyphae and aggregation of cellular contents. Protection of Rhizoctonia solani viability reached 46.8% for gallnut and 37.88% for clove in water emulsions of 1000 μg/mL gallnut and clove in the presence of 0.1% Tween 80. The protection by gallnut was significantly stronger than that of clove. The data could inform the choice of plant-sourced fungicides for the comprehensive treatment of rice sprig disease. The studied extract effectively protected rice sprigs and could be a suitable alternative to commercially available chemical fungicides. Further optimized field trials are needed to effectively sterilize rice paddies.

With the growth of network equipment, the security of network access environment becomes particularly important. Many network security technologies, such as vulnerability mining, fuzzy testing and intrusion detection, have attracted more and more attention. However, the effectiveness of these security technologies will be greatly reduced in the face of unknown protocols. By automatically extracting the format information of unknown protocols through the protocol reverse technology, the processing capability of the above security technologies in the face of unknown protocols can be enhanced. In this paper, by analyzing the changing characteristics of protocol fields, a field sequence coding method is proposed, which is suitable for reflecting the field sequence characteristics of different protocols and can improve the generalization ability of the model. Using the above field sequence coding method, a field classification model for unknown protocols is implemented based on the LSTM-FCN network, which is widely used in time series classification tasks. Finally, a binary protocol reverse method based on deep learning is proposed. The method is based on the field classification model and realizes the division and type identification of unknown protocol fields according to the classification results. In the experiment, the field classification model has high accuracy and recall in different protocols, which shows that the model has the ability to identify the field type according to the changing characteristics of the field. The proposed protocol reverse method also accurately and quickly identifies the field and its type, proving the reverse ability of the method to unknown binary protocols.

A bacterial strain (BGf-2) with anti-Beauveria bassiana activity was obtained from the feces of Blattella germanica (L.) and identified as Pseudomonas aeruginosa based on biochemical tests and 16S rRNA sequence analysis. An antifungal protein (A0A0H2ZK06) was purified with Sephadex G-100 column and DEAE-sepharose Fast Flowanion exchange from sterile BGf-2 fermentation liquid. Based on MALDI-TOF MS analysis and protein model building, A0A0H2ZK06 showed homology with Pyrrolidone carboxyl peptidases (pcps). Fermentation liquid and antifungal proteins not only reduced the B. bassiana conidial germination rate but also inhibited hyphal growth. A per os test showed that the mortality of cockroaches decreased after treatment with BGf-2 suspension compared with control. We hypothesized that gut microbes with antifungal activity might play an important role in protect cockroaches from pathogenic fungi.

We described herein a unique dual emission switching process from o-carborane–tetraphenylethene (TPE) dyads induced by twisted intramolecular charge transfer (TICT) in the crystalline state. Two novel o-carborane–tetraphenylethylene dyads, composed of a TPE core bearing o-carborane units, were designed, synthesized and characterized. Crystalline o-1 and o-2 were obtained with mono-substituted and bi-substituted o-carborane units, respectively. Both dyads presented locally excited (LE) emission and TICT induced emission in solutions. Crystalline o-1 demonstrated aggregation-induced emission (AIE), crystallization-induced emission (CIE), thermochromism, vapochromism, and mechanical luminescence (MCL) properties via TICT, while crystalline o-2 showed only the AIE and CIE properties orginating from the inherent ICT states. From the mechanistic investigations and theoretical calculations, it was demonstrated that the emission was reversible and switchable between green and orange colors for o-1, which was assigned to the facile TICT modulation in the solid state. The results manifest that the unique three-dimensional o-carborane cluster's structure plays an important role in precisely controlling the molecular packing patterns and conformations to achieve TICT emission.

To design and synthesize materials for alkaline hydrogen evolution is favorable for industrial hydrogen cycle operation. In this study, we present a facile approach to synthesize free-standing ruthenium-beryllium (RuBe) nanosheets, which possess amorphous phase state and associated with holey structures due to the molten method. The two-dimensional RuBe nanosheets exhibit improved activity than pure Ru counterpart and comparable properties to commercial Pt toward hydrogen evolution reaction in both of alkaline and neutral electrolytes. Based on the experiments and density functional theory calculations, it is suggested that the adsorption and dissociation of water molecules on Ru-based catalyst are much enhanced with the assistance of Be modulation, which are essential for the improved hydrogen production capability under alkaline condition. This work broadens the Ru-based catalyst family and may provide new insights for electrocatalyst development.

Ultrasonic-assisted grinding processing can effectively reduce the surface roughness and enhance the processing efficiency in the processing of hard and brittle materials. However, the most common ultrasonic assisted grinding is a type of contact ultrasonic grinding where the grinding tool directly contacts the workpiece, which means that it is necessary to accurately control the pre-pressure of the grinding tool on the workpiece. The control of pre-pressure will inevitably increase the complexity of the grinding device, and it is easy to wear the workpiece because of improper pre-pressure control. In this paper, a non-contact ultrasonic grinding method is proposed and the machining mechanism of non-contact ultrasonic grinding is revealed. The resonant frequency of the ultrasonic vibration system and vibration amplitude of the grinding tool working face were simulated and experimentally tested, respectively. Then, the experiment of non-contact ultrasonic grinding of a sapphire wafer was carried out. The result showed that non-contact ultrasonic grinding of the sapphire wafer could reduce the surface roughness by 48.6%. Compared with traditional contact grinding of sapphire wafer under certain pre-pressure conditions, the experimental results show that non-contact ultrasonic grinding has better effects in reducing surface roughness, improving processing efficiency, and improving the quality uniformity of the workpiece machining surface.

Reduced graphene oxide wrapped hollow molybdenum trioxide nanorods (MoO 3 @rGO) have been fabricated by a facile process. The MoO 3 @rGO shows improved lithium storage performance. It could deliver a high reversible capacity (842 mAh/g at 0.1 A/g), excellent cycling stability (778 mAh/g at 0.1 A/g after 200 cycles) and excellent rate capability (455 mAh/g at 2 A/g). The excellent electrochemical performance could be attributed as the special core (MoO 3 )/sheath (rGO) structure, which could accommodate the volume change of MoO 3 during lithiation/delithiation process. In addition, the rGO coating layer could improve the electronic conductivity of MoO 3 .

This project uses the Peltier effect to optimize the temperature control system of the thermostat, uses semiconductors to generate temperature differences, and then forms a heat pump, uses the conversion between high and low taste energy to replace the compressor for refrigeration and temperature adjustment, and at the same time uses the gas vortex characteristics to exchange gas and Adapt and improve the heat dissipation and other aspects. The incubator designed in this project is more excellent in terms of energy saving, low noise and service life, and improves the utilization of energy and resources. At the same time, the temperature control of the incubator has the advantages of stability and accuracy, which can effectively solve the problem of food and medical the deterioration and loss of supplies.

This design cleverly integrates modern machinery and control technology into the home system, and cleverly combines intelligent machinery and intelligent life, making family life more intelligent, comfortable and convenient. Use the ceiling as the carrier to realize the three-dimensional home design, make full use of the indoor top space, and solve the problems of small residential space and difficult storage. The main functions contained in this device are stored indoors. The introduction of this design conforms to the trend of intelligent family life and greatly facilitates people’s daily life.

Aiming at the problem of heat loss from the inner pot of the rice cooker, based on theoretical analysis and CFD simulation technology, this paper establishes a three-dimensional model of the inner pot of the rice cooker, uses the SCDM model analysis in Fluent, and performs grid division and fluid calculations. Adding a reflection layer and a vacuum insulation layer to the outer wall of the inner tank can effectively reduce the heat dissipation of the inner tank, which provides an important reference for the improvement of household rice cookers.

Heteroatom-doped carbon nanomaterials with well-defined porous are used as anode materials for SIBs due to their exceptional structural characteristics. In this work, porous N-doped carbon networks composed with ultrathin carbon nanosheets were synthesized via the direct pyrolysis of Vitamin B5. The content of nitrogen, specific surface area, porous structure of the N-doped carbon nanosheet networks were adjusted by changing reaction temperatures. The formation mechasim of the ultrathin N-doped carbon nanosheet networks was also proposed. The generation of calcium carbonate/calcium oxide used as a self-template renders the formation of the porous structure via thermal treatment. The optimized samples possess a superior lithium and sodium storage: 1534 mAh g −1 at 100 mA g −1 vs. Li/Li + and 335 mAh g −1 at 100 mA g −1 vs. Na/Na + , with nearly 100% cycling Coulombic efficiency, remarkable cycling retention and high rate capacity. Additionally, good electrocatalytic activity for ORR via a 4e −1 pathway determines that the resulting primary Zn-air battery showed high discharge power energy density (80 mW cm −2 ), high reversibility and stability over continuous cycles.

Generalized frequency division multiplexing (GFDM) is a flexible multicarrier modulation scheme and has been considered as a candidate for the physical layer of the 5G mobile communication system. The bit error rate performance of GFDM is affected by the symbol timing synchronization errors; however, the existing preamble-based symbol timing synchronization scheme for GFDM systems suffers from the timing-ambiguous plateau problem. In this paper, two improved preamble structures are constructed according to the characteristics of GFDM symbols to eliminate the timing-ambiguous plateau. The simulation results under AWGN and multipath fading channels show that the proposed autocorrelation timing synchronization schemes have better timing MSE performance compared to the existing preamble-based timing synchronization schemes.

In view of the flight characteristics of cruise missiles, a new path planning area map, slant distance map, is proposed on the premise that cruise missiles move at constant speed at a certain altitude. The path planning diagram is compared with the one without improvement. Particle swarm optimization (pso) is used to build a mathematical model for intelligent path planning and simulation of multiple cruise missiles. The results show that slant distance graph and particle swarm optimization can solve the path planning problem of multiple cruise missiles.

The photoluminescence (PL) and circularly polarized luminescence (CPL) of ((R)-1-phenyl-N-(pyren-1-ylmethyl)ethanamine) P-R were successfully modulated via fine-tuning and precise control of excited conformation of dimer/excimer by external stimuli. The resulting aggregation-induced emission (AIE)-active material (P-R) exhibited CPL with a low dissymmetry factor (∼10−4) in monomeric form, while demonstrating a prominent CPL signal with a higher dissymmetry factor (∼10−3) in thin solid films even without annealing processes.

An experimental study on a rotating detonation engine model using hydrogen/air mixture as propellant was conducted to analyze the initiation characteristics of detonation wave. Three ignition methods, including the ordinary spark plug, high-energy spark plug and thermal-jet tube, were used in the tests. The initiation process of rotating detonation wave was recorded and analyzed by a high frequency pressure measurement system and high-speed photographs. Operating range of the model engine was determined by series of experiments. Results indicate that the model engine could be successfully run by all the three ignition methods. Although the detonation formation time using spark plugs is quite stochastic, increasing the ignition energy can reduce the formation time of the detonation wave. Among the three ignition methods, thermal-jet provides the shortest detonation formation time. It is also found that the operating characteristic of the model engine is independent of the ignition device in the same operating condition. Three operation modes of the engine model have been observed, which are failed initiation of the detonation, unstable detonation and continuous rotating detonation. The experimental results show that the stable operating range can be extended by increasing the fuel mass flow rate.

Germanium (Ge) has been considered as a promising anode material for Li-ion batteries because of its theoretical capacity (1600 mA h g−1). However, its poor electrochemical performances resulting from the large volume variation during Li–Ge alloy/dealloy processes prevent its practical application. Herein, we designed a 3D core/shell structure by encapsulation of Ge in a sulfur (S) and nitrogen (N) co-doped three-dimensionally (3D) interconnected macroporous carbon matrix (denoted as Ge@S,N-3DPC). The 3D porous structure can not only buffer the volume change during alloy/dealloy processes, but also facilitate the electrolyte to soak in, offering fast ion/electron pathways. What's more, the co-doping of S and N in carbon could introduce more defects and active sites, which can also help to improve the interfacial adsorption and electrochemical behaviors. When used as an anode material for LIBs, the Ge@S,N-3DPC shows excellent electrochemical performances (1000 mA h g−1 at 200 mA g−1), outstanding cycling stability (94% capacity retention after 300 cycles) and high rate capability (358 mA h g−1 at 10 A g−1). This work develops a general strategy to improve the electrochemical performance of these alloy-type electrode materials with huge volume change in the energy storage area.

Solvent-dependent self-assemblies of an amphiphilic molecule based on perylene bisimide were employed in the fabrication of well-defined millimeter long nanorods and high density nanofibers, respectively. Moreover, the fabricated memory device demonstrated good behaviours with a low operating voltage, high ON/OFF ratio, long retention time, and good stability.

The Sb encapsulated in S and N co-doped three-dimensionally (3D) interconnected macroporous carbon composite (denoted as Sb@S,N-3DPC) has been fabricated by using silica opals as hard template following a carbonization process. The structural and morphological characterizations reveal the uniform 3D-network structure with the Sb nanoparticles embedded homogeneously in the carbon spherical shell. The Sb@S,N-3DPC electrode shows a high reversible capacity of 482 mAh g −1 at 100 mA g −1 , displaying good capacity stability (~93% of the initial discharge capacity after 500 cycles at 100 mA g −1 ). The electrode displays superior rate capability and ultralong cyclability (255 mAh g −1 at 2 Ag −1 after 2000 cycles) and also reveals a good rate capability that maintains 160 mAh g −1 at 5 Ag −1 . The excellent electrochemical performance of the Sb@S,N-3DPC is attributed to the 3D-porous carbon network structure and uniform distribution of Sb nanoparticles in carbon matrix, enhancing the conductivity, holding the structure integrity, and thus improving the cycling performance of the anode material. In addition, sulfur and nitrogen co-doping introduced more defects and active sites to the carbon framework, thereby improving the interfacial adsorption and electrochemical behaviors.

Treatment of 1,2-C6H4(SiH3)(SiH3) (1) with Pt(dcpe)(PEt3)2 (dcpe = Cy2PCH2CH2PCy2) in dry toluene at room temperature in the ratio of 1:1 leads to the complex {1,2-C6H4(SiH2)(SiH2)}PtII(dcpe) (2), which can react with proton organic reagent bearing hydroxy group with low steric hindrance to form a tetra-alkoxy substituted silyl platinum(II) compound (3). The structures of complexes (2) and (3) were unambiguously determined by multinuclear NMR spectroscopic studies and single crystal X-ray analysis.