Search

Highly-wrinkled graphene oxide (GO) films effectively inhibit or kill bacteria.

Fluorescent terbium-doped carbon dots (Tb-CDs) show high X-ray contrasting properties of ∼48.2 ± 3.9 HU L g−1.

Human movement and motor behavior science involve various theoretical frameworks and methodologies. This study describes the force control of motor phenomenon, processes of linear or nonlinear dynamics, and proposes a system approach as an additional potential aspect. Thus far, issues regarding these motor control and learning paradigms were critically examined, and their respective mechanisms were compared using descriptive analysis. Elaborate simulations based on the transitions and development flow of each component at issue contributed to the linear approach, laid concrete emphasis on the advantages of the nonlinear approach, and empirically derived the rationale for the indispensable application of system dynamics. Sports science can benefit from system dynamics associated with human motor behavior, as demonstrated in this study.

PURPOSE The quiet eye (QE) is defined as the final fixation time that is a specific target prior to initiating movement. This study aimed to identify the cause of QE in golf putting and to present an efficient practice method for improving putting skills. METHODS Thirty participants were randomly assigned to one of three groups. Each group practiced golf putting in different ways for two days. RESULTS The QE group showed a significant difference in putting scores, which was higher than that of the control group. The visual-occlusion group showed no difference compared to the other groups in terms of putting scores. The QE group showed a significant difference in terms of QE in the retention and competition tests compared to the pretest. The control group tended to have a slightly longer QE in competition tests compared to the pretest. The visualocclusion group showed no statistically significant difference in QE based on the period. All three groups had significantly longer swing times over the selected period. There was no significant difference in terms of the alpha power of the occipital lobe based on group and period. CONCLUSIONS The position of the visual-occlusion group became stable. However, the QE did not lengthen. The QE group had a longer QE. Furthermore, the control group that practiced with their eyes open tended to have longer QE. Therefore, QE may be related to visual-based cognitive processing rather than posturalkinematics. Finally, this study proved that QE practice is a more efficient method for novices in golf putting.

Recent advances in inorganic nanomaterial-based theranostics enabled imaging-guided molecular targeting and drug delivery, and various combinations of theranostic systems. The term “theranostics” is defined as diagnosis processed with therapy simultaneously with a specific connection between therapy and diagnosis. The inorganic nanomaterials, representatively carbon, metal, ceramic, and semiconductor-based nanomaterials, exhibit their unique characteristics to be used in theranostic applications. However, the unveiled human biosafety of nanomaterials for clinical use has become a major concern. Therefore, in this review, we compiled recent research on in vitro and in vivo biosafety of inorganic nanomaterials in various theranostic applications, along with a discussion of how the particle formulation, size, surface functionalization, test species, and test condition affect biocompatibility. Furthermore, the progress and challenges of the development of biocompatible inorganic nanomaterials for theranostic applications were discussed. In conclusion, with appropriate precautions on the biosafe condition to be administered, inorganic nanomaterials can be proposed to have excellent potential in the future theranostic application.

In recent years, bone tissue engineering (BTE) has made significant progress in promoting the direct and functional connection between bone and graft, including osseointegration and osteoconduction, to facilitate the healing of damaged bone tissues. Herein, we introduce a new, environmentally friendly, and cost-effective method for synthesizing reduced graphene oxide (rGO) and hydroxyapatite (HAp). The method uses epigallocatechin-3-O-gallate (EGCG) as a reducing agent to synthesize rGO (E-rGO), and HAp powder is obtained from Atlantic bluefin tuna (Thunnus thynnus). The physicochemical analysis indicated that the E-rGO/HAp composites had exceptional properties for use as BTE scaffolds, as well as high purity. Moreover, we discovered that E-rGO/HAp composites facilitated not only proliferation, but also early and late osteogenic differentiation of human mesenchymal stem cells (hMSCs). Our work suggests that E-rGO/HAp composites may play a significant role in promoting the spontaneous osteogenic differentiation of hMSCs, and we envision that the E-rGO/HAp composites could serve as promising candidates for BTE scaffolds, stem cell differentiation stimulators, and implantable device components due to their biocompatible and bioactive properties. Overall, we suggest a new approach for developing cost-effective and environmentally friendly E-rGO/HAp composite materials for BTE application.

Human spinal-cord-like tissues induced from human pluripotent stem cells are typically insufficiently mature and do not mimic the morphological features of neurulation. Here, we report a three-dimensional culture system and protocol for the production of human spinal-cord-like organoids (hSCOs) recapitulating the neurulation-like tube-forming morphogenesis of the early spinal cord. The hSCOs exhibited neurulation-like tube-forming morphogenesis, cellular differentiation into the major types of spinal-cord neurons as well as glial cells, and mature synaptic functional activities, among other features of the development of the spinal cord. We used the hSCOs to screen for antiepileptic drugs that can cause neural-tube defects. hSCOs may also facilitate the study of the development of the human spinal cord and the modelling of diseases associated with neural-tube defects.

Background Regeneration of defective neurons in central nervous system is a highlighted issue for neurodegenerative disease treatment. Various tissue engineering approaches have focused on neuritogenesis to achieve the regeneration of damaged neuronal cells because damaged neurons often fail to achieve spontaneous restoration of neonatal neurites. Meanwhile, owing to the demand for a better diagnosis, studies of super-resolution imaging techniques in fluorescence microscopy have triggered the technological development to surpass the classical resolution dictated by the optical diffraction limit for precise observations of neuronal behaviors. Herein, the multifunctional nanodiamonds (NDs) as neuritogenesis promoters and super-resolution imaging probes were studied. Methods To investigate the neuritogenesis-inducing capability of NDs, ND-containing growing medium and differentiation medium were added to the HT-22 hippocampal neuronal cells and incubated for 10 d. In vitro and ex vivo images were visualized through custom-built two-photon microscopy using NDs as imaging probes and the direct stochastic optical reconstruction microscopy (dSTORM) process was performed for the super-resolution reconstruction owing to the photoblinking properties of NDs. Moreover, ex vivo imaging of the mouse brain was performed 24 h after the intravenous injection of NDs. Results NDs were endocytosed by the cells and promoted spontaneous neuritogenesis without any differentiation factors, where NDs exhibited no significant toxicity with their outstanding biocompatibility. The images of ND-endocytosed cells were reconstructed into super-resolution images through dSTORM, thereby addressing the problem of image distortion due to nano-sized particles, including size expansion and the challenge in distinguishing the nearby located particles. Furthermore, the ex vivo images of NDs in mouse brain confirmed that NDs could penetrate the blood–brain barrier (BBB) and retain their photoblinking property for dSTORM application. Conclusions It was demonstrated that the NDs are capable of dSTORM super-resolution imaging, neuritogenic facilitation, and BBB penetration, suggesting their remarkable potential in biological applications. Graphical Abstract

Background Regeneration of defective neurons in central nervous system is a highlighted issue for neurodegenerative disease treatment. Various tissue engineering approaches have focused on neuritogenesis to achieve the regeneration of damaged neuronal cells because damaged neurons often fail to achieve spontaneous restoration of neonatal neurites. Meanwhile, owing to the demand for a better diagnosis, studies of super-resolution imaging techniques in fluorescence microscopy have triggered the technological development to surpass the classical resolution dictated by the optical diffraction limit for precise observations of neuronal behaviors. Herein, the multifunctional nanodiamonds (NDs) as neuritogenesis promoters and super-resolution imaging probes were studied. Methods To investigate the neuritogenesis-inducing capability of NDs, ND-containing growing medium and differentiation medium were added to the HT-22 hippocampal neuronal cells and incubated for 10 d. In vitro and ex vivo images were visualized through custom-built two-photon microscopy using NDs as imaging probes and the direct stochastic optical reconstruction microscopy (dSTORM) process was performed for the super-resolution reconstruction owing to the photoblinking properties of NDs. Moreover, ex vivo imaging of the mouse brain was performed 24 h after the intravenous injection of NDs. Results NDs were endocytosed by the cells and promoted spontaneous neuritogenesis without any differentiation factors, where NDs exhibited no significant toxicity with their outstanding biocompatibility. The images of ND-endocytosed cells were reconstructed into super-resolution images through dSTORM, thereby addressing the problem of image distortion due to nano-sized particles, including size expansion and the challenge in distinguishing the nearby located particles. Furthermore, the ex vivo images of NDs in mouse brain confirmed that NDs could penetrate the blood–brain barrier (BBB) and retain their photoblinking property for dSTORM application. Conclusions It was demonstrated that the NDs are capable of dSTORM super-resolution imaging, neuritogenic facilitation, and BBB penetration, suggesting their remarkable potential in biological applications.

Biofabrication approaches, such as three-dimensional (3D) bioprinting of hydrogels, have recently garnered increasing attention, especially in the construction of 3D structures that mimic the complexity of tissues and organs with the capacity for cytocompatibility and post-printing cellular development. However, some printed gels show poor stability and maintain less shape fidelity if parameters such as polymer nature, viscosity, shear-thinning behavior, and crosslinking are affected. Therefore, researchers have incorporated various nanomaterials as bioactive fillers into polymeric hydrogels to address these limitations. Carbon-family nanomaterials (CFNs), hydroxyapatites, nanosilicates, and strontium carbonates have been incorporated into printed gels for application in various biomedical fields. In this review, following the compilation of research publications on CFNs-containing printable gels in various tissue engineering applications, we discuss the types of bioprinters, the prerequisites of bioink and biomaterial ink, as well as the progress and challenges of CFNs-containing printable gels in this field.

Lymphoblastoid cell lines (LCLs) deposited from disease-affected individuals could be a valuable donor cell source for generating disease-specific induced pluripotent stem cells (iPSCs). However, generation of iPSCs from the LCLs is still challenging, as yet no effective gene delivery strategy has been developed.Here, we reveal an effective gene delivery method specifically for LCLs. We found that LCLs appear to be refractory toward retroviral and lentiviral transduction. Consequently, lentiviral and retroviral transduction of OCT4, SOX2, KFL4 and c-MYC into LCLs does not elicit iPSC colony formation. Interestingly, however we found that transfection of oriP/EBNA-1-based episomal vectors by electroporation is an efficient gene delivery system into LCLs, enabling iPSC generation from LCLs. These iPSCs expressed pluripotency makers (OCT4, NANOG, SSEA4, SALL4) and could form embryoid bodies.Our data show that electroporation is an effective gene delivery method with which LCLs can be efficiently reprogrammed into iPSCs.

In mice, zygotic genome activation (ZGA) occurs in two steps: minor ZGA at the one–cell stage and major ZGA at the two–cell stage. Regarding the regulation of gene transcription, minor ZGA is known to have unique features, including a transcriptionally permissive state of chromatin and insufficient splicing processes. The molecular characteristics may originate from extremely open chromatin states in the one–cell stage zygotes, yet the precise underlying mechanism has not been well studied. Recently, the R-loop, a triple–stranded nucleic acid structure of the DNA/RNA hybrid, has been implicated in gene transcription and DNA replication. Therefore, in the present study, we examined the changes in R-loop dynamics during mouse zygotic development, and its roles in zygotic transcription or DNA replication. Our analysis revealed that R-loops persist in the genome of metaphase II oocytes and preimplantation embryos from the zygote to the blastocyst stage. In particular, zygotic R-loop levels dynamically change as development proceeds, showing that R-loop levels decrease as pronucleus maturation occurs. Mechanistically, R-loop dynamics are likely linked to ZGA, as inhibition of either DNA replication or transcription at the time of minor ZGA decreases R-loop levels in the pronuclei of zygotes. However, the induction of DNA damage by treatment with anticancer agents, including cisplatin or doxorubicin, does not elicit genome-wide changes in zygotic R-loop levels. Therefore, our study suggests that R-loop formation is mechanistically associated with the regulation of mouse ZGA, especially minor ZGA, by modulating gene transcription and DNA replication.

Ectopic expression of Oct4, Sox2, Klf4 and c-Myc can reprogram somatic cells into induced pluripotent stem cells (iPSCs). Attempts to identify genes or chemicals that can functionally replace each of these four reprogramming factors have revealed that exogenous Oct4 is not necessary for reprogramming under certain conditions or in the presence of alternative factors that can regulate endogenous Oct4 expression. For example, polycistronic expression of Sox2, Klf4 and c-Myc can elicit reprogramming by activating endogenous Oct4 expression indirectly. Experiments in which the reprogramming competence of all other Oct family members tested and also in different species have led to the decisive conclusion that Oct proteins display different reprogramming competences and species-dependent reprogramming activity despite their profound sequence conservation. We discuss the roles of the structural components of Oct proteins in reprogramming and how donor cell epigenomes endow Oct proteins with different reprogramming competences., Stem cells: Mechanisms for reprogramming cells Cells can be reprogrammed into induced pluripotent stem cells (iPSCs), embryonic-like stem cells that can turn into any cell type and have extensive potential medical uses, without adding the transcription factor OCT4. Although other nearly identical OCT family members had been tried, only OCT4 could induce reprogramming and was previously thought to be indispensable. However, it now appears that the reprogramming can be induced by multiple pathways, as detailed in a review by Hans Schöler, Max Planck Institute for Biomolecular Medicine, Münster, and Johnny Kim, Max Planck Institute for Heart and Lung Research, Bad Nauheim, in Germany. They report that any factors that trigger cells to activate endogeous OCT4 can produce iPSCs without exogeously admistration of OCT4. The mechanisms for producing iPSCs can differ between species. These results illuminate the complex mechanisms of reprogramming.

In recent years, bone tissue engineering (BTE) has made significant progress in promoting the direct and functional connection between bone and graft, including osseointegration and osteoconduction, to facilitate the healing of damaged bone tissues. Herein, we introduce a new, environmentally friendly, and cost-effective method for synthesizing reduced graphene oxide (rGO) and hydroxyapatite (HAp). The method uses epigallocatechin-3-O-gallate (EGCG) as a reducing agent to synthesize rGO (E-rGO), and HAp powder is obtained from Atlantic bluefin tuna (Thunnus thynnus). The physicochemical analysis indicated that the E-rGO/HAp composites had exceptional properties for use as BTE scaffolds, as well as high purity. Moreover, we discovered that E-rGO/HAp composites facilitated not only the proliferation, but also early and late osteogenic differentiation of human mesenchymal stem cells (hMSCs). Our work suggests that E-rGO/HAp composites may play a significant role in promoting the spontaneous osteogenic differentiation of hMSCs, and we envision that E-rGO/HAp composites could serve as promising candidates for BTE scaffolds, stem-cell differentiation stimulators, and implantable device components because of their biocompatible and bioactive properties. Overall, we suggest a new approach for developing cost-effective and environmentally friendly E-rGO/HAp composite materials for BTE application.

Recent advances in three-dimensional (3D) bioprinting technologies have enabled the fabrication of sophisticated live 3D tissue analogs. Despite the existing hydrogel-based bioinks, the development of advanced bioink materials that can accurately reproduce the composition of a native extracellular matrix and mimic the intrinsic properties of laden cells remains challenging. In this study, 3D printed skin equivalents incorporating hair follicle structures and epidermal/papillary dermal layers were fabricated using gelatin methacryloyl/hyaluronic acid methacryloyl (GelMA/HAMA) bioink. The composition of collagen and glycosaminoglycan in native skin was recapitulated by adjusting the combination of GelMA and HAMA. The GelMA/HAMA bioink exhibited excellent viscoelastic and physicochemical properties, 3D printability, cytocompatibility, and functionality to maintain hair-inductive potency while facilitating spontaneous hair pore development. The results indicate that GelMA/HAMA hydrogels are promising candidates as bioinks for the 3D printing of skin equivalents. Furthermore, they may serve as useful models for skin tissue engineering and regeneration.

The most widely used one-dimensional (1D) carbonaceous nanomaterials in tissue engineering are carbon nanotubes, either single or multiwalled. Other forms of 1D nanomaterials, such as carbon nanowires and carbon nanofibers, have been less explored for biomedical applications. Herein, we synthesized 1D activated carbon nanofiber nanoparticles (ACNF NPs) from the polyacrylonitrile electrospun nanofibers by continuous processes like stabilization, alkali treatment, calcination and grinding. Two different sets of ACNF NPs-containing electrospun polycaprolactone (PCL) nanofiber mats, viz. surface-modified NPs-deposited mats (ACNF@PCL) and NPs-incorporated mats (ACNF-PCL), were prepared to examine their potential as skin tissue engineering scaffolds. We studied physicochemical characterizations such as Raman and X-ray diffraction spectra to confirm the prepared ACNF NPs. Scanning electron microscopy (SEM) observations showed that ACNF NPs are sized 280 ± 100 nm by diameter and 565-3322 nm by length. The NPs concentrated above 30 µg/mL were found to exhibit toxicity with

Artificial olfactory sensors that recognize patterns transmitted by olfactory receptors are emerging as a technology for monitoring volatile organic compounds. Advances in statistical processing methods and data processing technology have made it possible to classify patterns in sensor arrays. Moreover, biomimetic olfactory recognition sensors in the form of pattern recognition have been developed. Deep learning and artificial intelligence technologies have enabled the classification of pattern data from more sensor arrays, and improved artificial olfactory sensor technology is being developed with the introduction of artificial neural networks. An example of an artificial olfactory sensor is the electronic nose. It is an array of various types of sensors, such as metal oxides, electrochemical sensors, surface acoustic waves, quartz crystal microbalances, organic dyes, colorimetric sensors, conductive polymers, and mass spectrometers. It can be tailored depending on the operating environment and the performance requirements of the artificial olfactory sensor. This review compiles artificial olfactory sensor technology based on olfactory mechanisms. We introduce the mechanisms of artificial olfactory sensors and examples used in food quality and stability assessment, environmental monitoring, and diagnostics. Although current artificial olfactory sensor technology has several limitations and there is limited commercialization owing to reliability and standardization issues, there is considerable potential for developing this technology. Artificial olfactory sensors are expected to be widely used in advanced pattern recognition and learning technologies, along with advanced sensor technology in the future.

Three-dimensional (3D) bioprinting has attracted considerable attention for producing 3D engineered cellular microenvironments that replicate complex and sophisticated native extracellular matrices (ECM) as well as the spatiotemporal gradients of numerous physicochemical and biological cues. Although various hydrogel-based bioinks have been reported, the development of advanced bioink materials that can reproduce the complexity of ECM accurately and mimic the intrinsic property of laden cells is still a challenge. This paper reports 3D printable bioinks composed of phenol-rich gelatin (GHPA) and graphene oxide (GO) as a component for a myogenesis-inducing material, which can form a hydrogel network in situ by a dual enzyme-mediated cross-linking reaction. The in situ curable GO/GHPA hydrogel can be utilized successfully as 3D-printable bioinks to provide suitable cellular microenvironments with facilitated myogenic differentiation of C2C12 skeletal myoblasts. Overall, we suggest that functional bioinks may be useful in muscle tissue engineering and regenerative medicine.

Recently, the composites of varying biomaterials and two-dimensional (2D) nanomaterials have been increasingly developed in the field of tissue engineering and regeneration owing to their excellent physicochemical and mechanical properties. In particular, the combination of biocompatible polymers and 2D nanomaterials can endow the nanocomposite with novel biofunctional properties while maintaining the inherent character of every single material. These nanocomposites are known to have the potential for improvement of cellular behaviors such as cell adhesion, proliferation, and differentiation. In this study, poly(l-lactide-co-e-caprolactone) (PLCL) and laminin (Lam) nanofibers functionalized with black phosphorus (BP) were successfully fabricated to increase the neuritogenesis of HT22 hippocampal neuronal cells using an electrospinning process. The ternary nanofiber matrices of PLCL/Lam/BP were found to be suitable for supporting the attachment and proliferation of hippocampal neurons. Furthermore, these PLCL/Lam/BP nanofiber matrices could not only promote neurite outgrowth and alignment but also increase the neuritogenesis of hippocampal neurons by providing optimal microenvironments for neuronal differentiation. The underlying mechanism of this phenomenon was confirmed by determining the expression levels of genes related to neurogenesis. In conclusion, these results suggest that BP-functionalized composite nanofibers could be a promising candidate as a scaffold for neural tissue engineering and regeneration.

Cells respond directly to the chemical and topographical cues of the engineered substrate. To date, recent extensive studies have been witnessed on the wide development of biomimetic substrates that can regulate the cellular behaviors by establishing the specific cues of the substrate. It is well known that the topographical features with nanoscale and microscale strongly modulate the behaviors of cells, including adhesion, migration, proliferation, and differentiation. Herein, we present a simple and robust strategy to generate the patterned arrays of reduced graphene oxide (rGO) on a substrate to be used for the cellular interfaces. The rGO patterned arrays were prepared by an evaporative self-assembly process, which is a highly efficient technique for the controlled deposition of rGO sheets on a flat substrate. Such periodic patterned arrays of rGO could be utilized as a micron topographic substratum for living cell culture to observe the growth and alignment behaviors of C2C12 skeletal and vascular smooth muscle cells (VSMCs). The exquisite evaluations showed that both cells were regularly grown along the rGO patterned arrays leading to the well-defined contact guidance, but the only C2C12 myoblasts exhibited slightly higher level in the morphological alignment features to the rGO patterned arrays, compared to the VSMCs. Our findings suggest that the nanotextured thin films and patterned arrays of rGO can serve as promising biomimetic substrates for skeletal muscle cells and provide subtle effects on cellular morphology discriminating in their responses.

Wound healing is the dynamic tissue regeneration process replacing devitalized and missing tissue layers. With the development of photomedicine techniques in wound healing, safe and noninvasive photobiomodulation therapy is receiving attention. Effective wound management in photobiomodulation is challenged, however, by limited control of the geometrical mismatches on the injured skin surface. Here, adhesive hyaluronic acid–based gelatin nanofibrous membranes integrated with multiple light-emitting diode (LED) arrays are developed as a skin-attachable patch. The nanofibrous wound dressing is expected to mimic the three-dimensional structure of the extracellular matrix, and its adhesiveness allows tight coupling between the wound sites and the flexible LED patch. Experimental results demonstrate that our medical device accelerates the initial wound healing process by the synergetic effects of the wound dressing and LED irradiation. Our proposed technology promises progress for wound healing management and other biomedical applications.

Conventional bioinert bone grafts often have led to failure in osseointegration due to low bioactivity, thus much effort has been made up to date to find alternatives. Recently, MXene nanoparticles (NPs) have shown prominent results as a rising material by possessing an osteogenic potential to facilitate the bioactivity of bone grafts or scaffolds, which can be attributed to the unique repeating atomic structure of two carbon layers existing between three titanium layers. In this study, we produced MXene NPs-integrated the ternary nanofibrous matrices of poly(L-lactide-co-ε-caprolactone, PLCL) and collagen (Col) decorated with MXene NPs (i.e., PLCL/Col/MXene), as novel scaffolds for bone tissue engineering, via electrospinning to explore the potential benefits for the spontaneous osteogenic differentiation of MC3T3-E1 preosteoblasts. The cultured cells on the physicochemical properties of the nanofibrous PLCL/Col/MXene-based materials revealed favorable interactions with the supportive matrices, highly suitable for the growth and survival of preosteoblasts. Furthermore, the combinatorial ternary material system of the PLCL/Col/MXene nanofibers obviously promoted spontaneous osteodifferentiation with positive cellular responses by providing effective microenvironments for osteogenesis. Therefore, our results suggest that the unprecedented biofunctional advantages of the MXene-integrated PLCL/Col nanofibrous matrices can be expanded to a wide range of strategies for the development of effective scaffolds in bone tissue regeneration. Graphical Abstract

Graphene family nanomaterials (GFNs) are well-known carbonaceous materials, which find application in several fields like optoelectronics, photocatalysis, nanomedicine, and tissue regeneration. Despite possessing many advantages in biomedical applications, GFNs exhibited toxicity depending on various parameters including dosage, size, exposure time, and kinds of administration. GFNS are majorly classified into nanosheets, quantum dots, nanoplatelets, and nanoribbons based on morphology. Understanding the toxic effects of GFNs would provide new suggestions as to how the materials can be utilized effectively. Hence, we are summarizing here some of the recent findings in cellular and animal level toxicity studies of GFNs on the perspective of their different morphologies. Notwithstanding, we highlight progress, challenges, and new toxicological approaches to ensure biosafety of GFNs for future directions.

Graphene is sp

Owing to astonishing properties such as the large surface area to volume ratio, mechanical stability, antimicrobial property, and collagen crosslinking, graphene family nanomaterials (GFNs) have been widely used in various biomedical applications including tissue regeneration. Many review literatures are available to compile the role of GFNs in cardiac, bone, and neuronal tissue regeneration. However, the contribution of GFNs in skin wound healing and tissue regeneration was not yet discussed. In the present review, we have highlighted the properties of GFNs and their application in skin wound healing. In addition, we have included challenges and future directions of GFNs in skin tissue regeneration in the portion of conclusion and perspectives.

With the emerging trends and recent advances in nanotechnology, it has become increasingly possible to overcome current hurdles for bone and cartilage regeneration. Among the wide type of nanomaterials, graphene (G) and its derivatives (graphene-based materials, GBMs) have been highlighted due to the specific physicochemical and biological properties. In this review, we present the recent development of GBM-based scaffolds for bone and cartilage engineering, focusing on the formulation/shape/size-dependent characteristics, types of scaffold and modification, biocompatibility, bioactivity and underlying mechanism, drawback and prospect of each study. From the findings described herein, mechanical property, biocompatibility, osteogenic and chondrogenic property of GBM-based scaffolds could be significantly enhanced through various scaffold fabrication methods and conjugation with polymers/nanomaterials/drugs. In conclusion, the results presented in this review support the promising prospect of using GBM-based scaffolds for improved bone and cartilage tissue engineering. Although GBM-based scaffolds have some limitations to be overcome by future research, we expect further developments to provide innovative results and improve their clinical potential for bone and cartilage regeneration.

Two-dimensional graphene family nanomaterials (GFNs) are extensively studied by the researchers for their quantum size effect, large surface area, numerous reactive functional sites, and biocompatibility. The hybrid materials of GFNs exhibit an increased level of mechanical strength, optical, electronic, and catalytic activity due to their incorporation. The application of GFNs in the energy, environment, electric and electronic, personal care, and health sectors is abundant, which is not only by their unique physicochemical properties but also by their ease and large production by various synthetic approaches and economically inexpensiveness. Their general biomedical applications include bioimaging, biosensing, drug delivery, tissue engineering, killing the microbes, and demolishing the cancer tumor. The first chapter of this book describes definitions, synthetic methods, unique properties, and biomedical applications of GFNs, including graphene, graphene oxide, and reduced graphene oxide.

Two-dimensional nanomaterials have been widely explored by researchers due to their nanosized thickness and quantum size effect. They were layered double hydroxides, transition metal dichalcogenides, transition metal oxides, and synthetic silicate clays. Among the 2D nanomaterials, graphene and their derivatives were investigated extensively at first as they exhibited exceptional conductivity and a zero-band gap semimetal nature. Though graphene family nanomaterials (GFNs) were utilized for several physicochemical applications, including electronic, electric, mechanic, photonic, magnetic, and catalytic devices, their biomedical applications are still meritorious. Biosensor, bioimaging, drug delivery, tumor ablation, and tissue regeneration are some of them. The outlook of the present book chapters encompasses the preparation of GFNs, physicochemical properties, biomedical applications, biosafety, and their future directions.

Reactive oxygen species (ROS) promote oxidative stress, which directly causes molecular damage and disrupts cellular homeostasis, leading to skin aging. Baicalein, a flavonoid compound isolated from the root of Scutellaria baicalensis Georgi has antioxidant, anticancer, anti-inflammatory, and other medicinal properties. We aimed to investigate the protective effect of baicalein on the disruption of tight junctions and mitochondrial dysfunction caused by H2O2-induced oxidative stress in HaCaT keratinocytes. The cells were pretreated with 20 and 40 µM baicalein followed by treatment with 500 µM H2O2. The results revealed that baicalein exerted antioxidant effects by reducing intracellular ROS production. Baicalein attenuated the degradation of the ECM (MMP-1 and Col1A1) and the disruption of tight junctions (ZO-1, occludin, and claudin-4). In addition, baicalein prevented mitochondrial dysfunction (PGC-1α, PINK1, and Parkin) and restored mitochondrial respiration. Furthermore, baicalein regulated the expression of antioxidant enzymes, including NQO-1 and HO-1, via the Nrf2 signaling pathway. Our data suggest that the cytoprotective effects of baicalein against H2O2-induced oxidative stress may be mediated through the Nrf2/NQO-1/HO-1 signaling pathway. In conclusion, baicalein exerts potent antioxidant effects against H2O2-induced oxidative stress in HaCaT keratinocytes by maintaining mitochondrial homeostasis and cellular tight junctions.

Fibrous structures, in general, have splendid advantages in different forms of micro- and nanomembranes in various fields, including tissue engineering, filtration, clothing, energy storage, etc. In the present work, we develop a fibrous mat by blending the bioactive extract of Cassia auriculata (CA) with polycaprolactone (PCL) using the centrifugal spinning (c-spinning) technique for tissue-engineered implantable material and wound dressing applications. The fibrous mats were developed at a centrifugal speed of 3500 rpm. The PCL concentration for centrifugal spinning with CA extract was optimized at 15% w/v of PCL to achieve better fiber formation. Increasing the extract concentration by more than 2% resulted in crimping of fibers with irregular morphology. The development of fibrous mats using a dual solvent combination resulted in fine pores on the fiber structure. Scanning electron microscope (SEM) images showed that the surface morphology of the fibers in the produced fiber mats (PCL and PCL-CA) was highly porous. Gas chromatography–mass spectrometry (GC-MS) analysis revealed that the CA extract contained 3-methyl mannoside as the predominant component. The in vitro cell line studies using NIH3T3 fibroblasts demonstrated that the CA-PCL nanofiber mat was highly biocompatible, supporting cell proliferation. Hence, we conclude that the c-spun, CA-incorporating nanofiber mat can be employed as a tissue-engineered construct for wound healing applications.

Background The implants of pure titanium (Ti) and its alloys can lead to implant failure because of their poor interaction with bone-associated cells during bone regeneration. Surface modification over implants has achieved successful implants for enhanced osseointegration. Herein, we report a robust strategy to implement bioactive surface modification for implant interface enabled by the combinatorial system of reduced graphene oxide (rGO)-coated sandblasted, large-grit, and acid-etched (SLA) Ti to impart benefits to the implant. Methods We prepared SLA Ti (ST) implants with different surface modifications [i.e., rGO and recombinant human bone morphogenetic protein-2 (rhBMP-2)] and investigated their dental tissue regenerating ability in animal models. We performed comparative studies in surface property, in vitro cellular behaviors, and in vivo osseointegration activity among different groups, including ST (control), rhBMP-2-immobilized ST (BI-ST), rhBMP-2-treated ST (BT-ST), and rGO-coated ST (R-ST). Results Spectroscopic, diffractometric, and microscopic analyses confirmed that rGO was coated well around the surfaces of Ti discs (for cell study) and implant fixtures (for animal study). Furthermore, in vitro and in vivo studies revealed that the R-ST group showed significantly better effects in cell attachment and proliferation, alkaline phosphatase activity, matrix mineralization, expression of osteogenesis-related genes and protein, and osseointegration than the control (ST), BI-ST, and BT-ST groups. Conclusion Hence, we suggest that the rGO-coated Ti can be a promising candidate for the application to dental or even orthopedic implants due to its ability to accelerate the healing rate with the high potential of osseointegration.