Search

This study focused on the impact in 3T3 fibroblasts of several types of empty and curcumin- and resveratrol-loaded solid lipid nanoparticles (SLN) on cell viability and lipid metabolism in relation to their lipid content and encapsulated drug. SLN, prepared by hot homogenization/ultrasonication, were characterized with respect to size, polydispersity index, and zeta potential. Compritol® 888 ATO at different concentrations (4%, 5%, and 6% wt/wt) was chosen as lipid matrix while Poloxamer 188 (from 2.2% to 3.3% wt/wt) and Transcutol (TRC; 2% or 4%) were added as nanoparticle excipients. Prepared SLN were able to encapsulate high drug amount (encapsulation efficiency percentage of about 97-99%). All empty SLN did not show cytotoxicity (by MTT assay, at 24 h of incubation) in 3T3 cells independently of the lipid and TRC amount, while a viability reduction in the range 5-11% and 12-27% was observed in 3T3 cells treated with curcumin-loaded and resveratrol-loaded SLN, respectively. SLN without TRC did not affect cell lipid metabolism, independently from the lipid content. Empty and loaded SLN formulated with 4% of Compritol and 4% of TRC significantly affected, after 24 h of incubation at the dose of 5 μl/ml, cell polar lipids (phospholipids and free cholesterol) and fatty acid profile, with respect to control cells. Loaded compounds significantly modulated the impact of the corresponding empty formulation on cell lipids. Therefore, the combined impact on lipid metabolism of SLN and loaded drug should be taken in consideration in the evaluation of the toxicity, potential application, and therapeutic effects of new formulations.

8-methoxypsoralen is the most common drug in psoralen plus ultraviolet light irradiation therapy for the treatment of severe psoriasis. Despite of the efficacy, its classic oral administration leads to several serious adverse effects. However, the topical psoralen application produces a drug skin accumulation lower than that obtained by oral administration, due to the drug low skin permeability. In this paper, 8-methoxypsoralen loaded Penetration Enhancer-containing Vesicles were prepared using soy phosphatidylcholine and the penetration enhancer Transcutol® (5% or 10%) and characterized in terms of size, polydispersity index, zeta potential and encapsulation efficiency. No statistically significant differences in both size (~135 nm) and encapsulation efficiency (~65%) were found for different Transcutol® concentration. Transdermal delivery study assessed by Franz diffusion cells, showed that the 8-methoxypsoralen mainly accumulated into the stratum corneum. Moreover, after Penetration Enhancer-containing Vesicles application, the drug recovered in this layer is almost double of that delivered by conventional liposomes, while no significant difference was found from the different Transcutol® concentrations. Finally, biocompatibility checked by an MTT assay, demonstrated that the incubation of human keratinocytes for 24 h with 8-methoxypsoralen loaded Penetration Enhancer-containing Vesicles did not significantly reduce cell viability.

Needle-free liquid jet injectors are medical devices used to administer pharmaceutical solutions through the skin. Jet injectors generate a high-speed stream of liquid medication that can puncture the skin and deliver the drug to the underlying tissues. In this work, we investigated the feasibility of using liquid jet injectors to administer nanosuspensions, assessing the impact of the jet injection on their pharmaceutical and physicochemical properties. For this purpose, the model drug diclofenac was used to prepare a set of nanosuspensions, stabilized by poloxamer 188, and equilibrated at different pHs. The hydrodynamic diameter and morphology of the nanocrystals were analyzed before and after the jet injection across porcine skin in vitro, together with the solubility and release kinetics of diclofenac in a simulated subcutaneous environment. The efficacy of the jet injection (i.e., the amount of drug delivered across the skin) was evaluated for the nanosuspension and for a solution, which was used as a control. Finally, the nanosuspension was administered to rats by jet injector, and the plasma profile of diclofenac was evaluated and compared to the one obtained by jet injecting a solution with an equal concentration. The nanosuspension features were maintained after the jet injection in vitro, suggesting that no structural changes occur upon high-speed impact with the skin. Accordingly, in vivo studies demonstrated the feasibility of jet injecting a nanosuspension, reaching relevant plasma concentration of the drug. Overall, needle-free jet injectors proved to be a suitable alternative to conventional syringes for the administration of nanosuspensions.

The treatment strategy required for the effective healing of diabetic foot ulcer (DFU) is a complex process that is requiring several combined therapeutic approaches. As a result, there is a significant clinical and economic burden associated in treating DFU. Furthermore, these treatments are often unsuccessful, commonly resulting in lower-limb amputation. The use of drug-loaded scaffolds to treat DFU has previously been investigated using electrospinning and fused deposition modelling (FDM) 3D printing techniques; however, the rapidly evolving field of bioprinting is creating new opportunities for innovation within this research area. In this study, 3D-bioprinted scaffolds with different designs have been fabricated for the delivery of an antibiotic (levoflocixin) to DFU. The scaffolds were fully characterised by a variety of techniques (e.g. SEM, DSC/TGA, FTIR, and mechanical characterisation), demonstrating excellent mechanical properties and providing sustained drug release for 4 weeks. This proof of concept study demonstrates the innovative potential of bioprinting technologies in fabrication of antibiotic scaffolds for the treatment of DFU. Graphical abstract

3D printing is an emerging technology aiming towards personalized drug delivery, among many other applications. Microneedles (MN) are a viable method for transdermal drug delivery that is becoming more popular for delivery through the skin. However, there is a need for a faster fabrication process with potential for easily exploring different geometries of MNs. In the current study, a digital light processing (DLP) method of 3D printing for fabrication of hollow MN arrays using commercial UV curable resin was proposed. Print quality was optimised by assessing the effect of print angle on needle geometries. Mechanical testing of MN arrays was conducted using a texture analyser. Angled prints were found to produce prints with geometries closer to the CAD designs. Curing times were found to affect the mechanical strength of MNs, with arrays not breaking when subjected to 300 N of force but were bent. Overall, DLP process produced hollow MNs with good mechanical strength and depicts a viable, quick, and efficient method for the fabrication of hollow MN arrays.

8-methoxypsoralen is the most common drug in psoralen plus ultraviolet light irradiation therapy for the treatment of severe psoriasis. Despite of the efficacy, its classic oral administration leads to several serious adverse effects. However, the topical psoralen application produces a drug skin accumulation lower than that obtained by oral administration, due to the drug low skin permeability. In this paper, 8-methoxypsoralen loaded Penetration Enhancer-containing Vesicles were prepared using soy phosphatidylcholine and the penetration enhancer Transcutol® (5% or 10%) and characterized in terms of size, polydispersity index, zeta potential and encapsulation efficiency. No statistically significant differences in both size (~135 nm) and encapsulation efficiency (~65%) were found for different Transcutol® concentration. Transdermal delivery study assessed by Franz diffusion cells, showed that the 8-methoxypsoralen mainly accumulated into the stratum corneum. Moreover, after Penetration Enhancer-containing Vesicles application, the drug recovered in this layer is almost double of that delivered by conventional liposomes, while no significant difference was found from the different Transcutol® concentrations. Finally, biocompatibility checked by an MTT assay, demonstrated that the incubation of human keratinocytes for 24 h with 8-methoxypsoralen loaded Penetration Enhancer-containing Vesicles did not significantly reduce cell viability.

Topical psoralens plus ultraviolet A radiation (PUVA) therapy consists in the topical application of 8-methoxypsoralen (8-MOP) followed by the skin irradiation with ultraviolet A radiation. The employment of classical 8-MOP vehicles in topical PUVA therapy is associated with poor skin deposition and weak skin permeability of psoralens, thus requiring frequent drug administration. The aim of the present work was to formulate solid lipid nanoparticles (SLNs) able to increase the skin permeation of 8-MOP. For this purpose, the penetration enhancer Transcutol® P (TRC) was added to the SLN formulation. SLNs were characterized with respect to size, polydispersity index, zeta potential, entrapment efficiency, morphology, stability, and biocompatibility. Finally, 8-MOP skin diffusion and distribution within the skin layers was investigated using Franz cells and newborn pig skin. Freshly prepared nanoparticles showed spherical shape, mean diameters ranging between 120 and 133 nm, a fairly narrow size distribution, highly negative ζ potential values, and high entrapment efficiency. Empty and loaded formulations were almost stable over 30 days. In vitro penetration and permeation studies demonstrated a greater 8-MOP accumulation in each skin layer after SLN TRC 2% and TRC 4% application than that after SLN TRC 0% application. Finally, the results of experiments on 3T3 fibroblasts showed that the incorporation of TRC into SLNs could enhance the cellular uptake of nanoparticles, but it did not increase their cytotoxicity.