Search

OBJECTIVE: To obtain eripheral blood mesenchymal stem cells (PBMSCs) from sheep and rabbits by continuous mobilization of granulocyte colony-stimulating factor (G-CSF), and by comparing the success rates, cell yields and biological characteristics of the two sources of PBMSCs, and to provide the experimental basis for the preclinical study of PBMSCs transplantation to repair articular cartilage injury and cartilage tissue engineering. METHODS: Through morphological characteristics, flow cytometry analysis of its surface markers, and induction of trilineage differentiation of the two cells in vitro (ie: adipogenic differentiation, osteogenic differentiation, chondrogenic differentiation), the obtained cells were finally confirmed to be PBMSCs. The colony-forming units (CFUs) and the acquisition success rates of the two PBMSCs were counted and compared, and the production of the second generation of the two PBMSCs was counted and compared by hemocytometer, and the cell counting kit-8 was used to detect the doubling time of the two PBMSCs, and the results of trilineage differentiation were quantitatively analyzed by image processing. RESULTS: Microscopically, the PBMSCs of fusiform sheep and rabbits were arranged in fish group, and the second generation of sheep and rabbit PBMSCs expressed CD44 and CD90, but not CD34 and CD45. The induction of trilineage differentiation of the two cells in vitro were successful. The CFUs of primary sheep and rabbits PBMSCs were: 7.27±1.56, 5.73±1.62, and the success rate of acquisition of sheep and rabbits PBMSCs were 78.57% and 36.67%. The number of the second-generation sheep and rabbits PBMSCs that obtained per milliliter of peripheral blood were: 29 582±2 138, 26 732±2 286, and the cell doubling times (h) of the third-generation sheep and rabbits PBMSCs were: 22.32±0.28, 33.21±0.64, the cell doubling time (h) of the fourth generation sheep and rabbits PBMSCs were: 23.62±0.56, 35.30±0.38, and the quantitative lipid ratio of sheep and rabbit PBMSCs were: 7.77%±3.81%, 17.05%±1.52%, sheep and rabbit PBMSCs chondroglobus acid mucopolysaccharide positive ratios were: 11.67%±0.53%, 8.14%±0.57%. There were statistical differences among the above groups (P < 0.05). CONCLUSION: The continuous mobilization of G-CSF to obtain sheep PBMSCs is more efficient. Sheep PBMSCs have more abundant yield and stronger proliferation ability.Sheep PBMSCs can produce more acidic mucopolysaccharides and have lower adipogenic abi-lity under appropriate conditions. Sheep PBMSCs have good research prospects in repair of articular cartilage injury with autologous stem cell transplantation and preclinical animal in vivo experiment of cartilage tissue engineering.This experiment provides further experimental basis for this kind of research.

Apis cerana cerana is an excellent subspecies of Apis cerana, playing a vital role in pollination for wild flowers and crops as well as ecological balance. Nosema ceranae, an emergent fungal parasite infecting various bee species, originates from eastern honeybee. In this article, midguts of N. ceranae-inoculated A. c. cerana workers at 7 days post inoculation (dpi) and 10 dpi (AcT1 and AcT2) and un-inoculated workers’ midguts (AcCK1, AcCK2) were subjected to Nanopore-based genome-wide DNA methylation sequencing. Totally, 1773258, 2151476, 1927874 and 2109961 clean reads were generated from AcCK1, AcCK2, AcT1, and AcT2 groups, with the N50 lengths of 7548, 7936, 7678, and 7291 and the average quality value of 8.97, 8.95, 9.24, and 8.98, respectively. Among these, 93.85%, 94.49%, 88.69%, and 81.27% clean reads could be mapped to the reference genome of A. c. cerana. In the aforementioned four groups, 2149685, 2614513, 1637018 and 2726985 CHG sites were identified; the numbers of CHH sites were 9581990, 11801082, 7178559, and 12342423, whereas those of CpG sites were 14325356, 15703508, 14856284 and 13956849, respectively. Additionally, there were 36114, 118867, 30249, and 82984 6mA methylation sites respectively discovered. These data can be used for identifying differential 5mC methylation and 6mA methylation engaged in response of eastern honeybee workers to N. ceranae infestation, and for investigating the 5mC or 6mA methylation-mediated mechanism underlying host response.Value of the dataThe data provide enrichment for information about 5mC and 6mA methylation in eastern honeybees.Our data contributes to clarification of the epigenetic mechanism underlying eastern honeybee worker’s response to microsporidian infestation.This presented data offer novel insights into interaction between Apis cerana and Nosema ceranae.

The morphology and size of primary Si has a significant influence on the thermal conductivity (TC) and strength of Al–17Si–3.5Cu. In this study, the effect of a 1–3 wt% SiC nanoparticle (SiCnps) addition on TC and tensile strength of Al–17Si–3.5Cu was investigated. Nanoparticles distributed at the interface between primary Si and Al led to a significant refinement of primary Si; for example, a primary Si size of 2 μm with 3 wt% SiCnps addition was achieved. TC of SiCnps/Al–17Si–3.5Cu improved with an increase in nanoparticle content. Nanoparticles distributed at the interface between Si and Al reduced the interfacial thermal resistance. Thus, the effective TC of eutectic Si increased. Owing to the refinement of the primary Si and the increased interfacial thermal resistance, originating from the high content of SiCnps at the interface, the effective TC of primary Si decreased. Compared with Al–17Si–3.5Cu, contribution to the improvement of the TC of SiCnps/Al–17Si–3.5Cu resulted mainly from eutectic Si. Due to the refinement of primary Si, the tensile strength of SiCnps/Al–17Si–3.5Cu improved with an increase in SiCnps content. When the SiCnps content was 3 wt%, the yield strength, ultimate tensile strength and elongation of SiCnps/Al–17Si–3.5Cu were ∼176 MPa, 418 MPa and 7%, respectively, which were improved by 37.5%, 53.7% and 218%, respectively, when compared with Al–17Si–3.5Cu.

OBJECTIVE: To estimate the prevalence rate of bone and joint injury in China and to describe the three-dimension distribution of the disease (area, time and people). METHODS: Based on a cross-sectional design, a retrospective study was conducted by using Chinese basic medical insurance database from January 1, 2013 to December 31, 2017 to analyze the epidemiological characteristics of bone and joint injury. The prevalence rate of bone and joint injury in each city was calculated, and then using meta-analyses to estimate the pooled prevalence of each area and the whole country. The pooled prevalence rates were compared among the different groups of populations, in terms of geographical area, time and population characteristics (age and gender). RESULTS: A total of 28 419 264 subjects were included in this study, including 705 793 patients with bone and joint injury. From 2013 to 2017, in Chinese basic medical insurance database, the overall prevalence rate of bone and joint injury was 141.5(95%CI: 90.4-203.7) per 10 000 population, and the prevalence rates of non-specific or polyarticular disease, knee disease, and shoulder disease were 101.6 (95%CI: 63.5-148.4)per 10 000 population, 22.5(95%CI:15.1-31.4)per 10 000 population and 10.9 (95%CI: 6.4-16.4)per 10 000 population. The prevalence rates varied across the areas, the highest rate was observed in North China, with the prevalence of 310.6 (95%CI: 12.6-989.7) per 10 000 population, and the lowest rate was observed in Southwest China, with the prevalence of 59.0 (95%CI: 37.5-85.2) per 10 000 population. The prevalence rate of bone and joint injury increased over the study period, from 111.1 (95%CI: 56.0-182.5)per 10 000 population in 2013 to 175.5 (95%CI: 116.8-245.5)per 10 000 population in 2017. The prevalence of bone and joint injury in the female population was 149.1 (95%CI: 94.2-215.9) per 10 000 population, which was higher than that of men [133.6(95%CI: 86.2-190.9) per 10 000 population]. The higher prevalence of knee disease, unspecified or polyarticular disease, and bone and joint injury were observed in people aged 60 years and older, while the prevalence of shoulder disease peaked in 40-59 years old people [20.6 (95%CI: 12.5-30.5) per 10 000 population]. CONCLUSION: This study reported a relative low prevalence of bone and joint injury in China from 2013 to 2017. The prevalence increased over the study period, and the highest prevalence rate was observed in North China. The prevalence rate showed differences among different groups of populations, and higher rates were observed in females and people aged 60 years and older.

In order to clarify the reaction behaviour systemically between CaO and dephosphorisation slag, the solid CaO piece was dipped into the liquid slag and reacted for 5–300 seconds at 1573 K, the reaction mechanism between homogeneous CaO–SiO2–FeO–P2O5 slag and CaO was investigated in the present study. The results shows that 2CaO·SiO2 and 3FeO·P2O5 are the main phases in dephosphorisation slag, the enrichment phase of phosphorus were formed very fast in

In the present work, a melt spinning technique was employed to produce Ti51·5Ni48·5 shape memory ribbons. Two types of Ti2Ni particles were observed using high resolution transmission electron microscopy, and a model is proposed based on the microstructural observations. For the large Ti2Ni particles (∼300–500 nm), it is suggested that they are the product of an L32(Ti)+TiNi→Ti2Ni peritectic reaction, where the subscript stands for the Ni content. However, in the case of small particles, novel structures composed of a Ti-rich core and an amorphous shell layer are observed, which are the result of the rapidly solidified L(Ti)→β(Ti)+L24(Ti) and L24(Ti)→β(Ti)+Ti2Ni divorced eutectic process.

The effect of TiO2 additive on the synthesis of dense forsterite is investigated in the present work. As the intermediate phase formed in the synthesis process, the magnesium titanate plays a very important role in the improvement of the formation and densification of forsterite. Notably, it finally transfers into a high melting point second phase when segregated at a higher sintering temperature. The addition of TiO2 improves the density of forsterite at a low temperature by liquid-phase sintering and may reduce or even eliminate the defects of liquid phase-sintering by the segregation of the liquid phase at high temperature.

The aim of this study was to detect the expression of transforming growth factor-s1 (TGF-s1) in neonatal rats with hyperoxia-induced bronchopulmonary dysplasia (BPD) and to explore its relationship with lung development. Forty-eight rats (2-3 days old) were randomly divided into a hyperoxia group and a control group (N = 24) which were then fed in ≥95% oxygen atmosphere and air, respectively. On the 1st, 3rd and 7th days of hyperoxia exposure, morphological changes of lung tissues were observed under an optical microscope. TGF-s1 mRNA and protein levels in lung tissues were detected by real-time quantitative polymerase chain reaction and western blot, respectively. With increasing time of hyperoxia exposure, the hyperoxia group gradually suffered from pathological changes such as poor development of lung tissues, alveolar simplification, decrease in the number of alveoli, and hindered pulmonary microvascular development. On the 7th day of hyperoxia exposure, TGF-s1 mRNA and protein levels (relative to b-actin) of the hyperoxia group (0.34 ± 0.19 and 0.21 ± 0.09, respectively) were significantly lower than those of the control group (0.83 ± 0.45 and 0.57 ± 0.45, respectively; P < 0.05). TGF-s1 participates in the pathogenesis of BPD as an important regulatory factor during pulmonary vascular development.

SUMMARYHypermucoviscous (HV) isolates ofKlebsiella pneumoniaehave been linked to virulence potential in experimental infections. We examined 33 isolates ofK. pneumoniaefrom patients with bacteraemia for the HV phenotype on agar culture, and determined their virulence potential by screening for capsular (K) serotype by polymerase chain reaction and the presence of seven virulence factor genes. Fourteen (42·4%) isolates expressed the HV phenotype and 11 of these were serotype K1 or K2; these serotypes were not identified in HV-negative isolates. The genesrmpA,rmpA2,aerobactin,wabGandallSwere significantly more frequent in HV than non-HV isolates. Multilocus sequence typing identified 21 sequence types (ST), eight of which were found in HV-positive isolates and the clonal relatedness of isolates of the most frequent types (ST23 and ST11) from different hospitals was confirmed by pulsed-field gel electrophoresis. The HV phenotype was more associated with community-acquired infection with a lower frequency of fatal underlying illness, but with significantly more focal infections, notably liver abscesses. Clinicians should be aware of such clinical impacts of the HV phenotype.

An exact solution was developed for a quasi-steady-moving-interface heat transfer problem in laser transformation hardening by a beam customized to a flat-top rectangular shape. The absorption and release of the latent heat were taken into account. The solution provided the body temperature, heating rate, and subsequent cooling rate. Using the IT and CCT diagrams, the rapid austenitization and pearlitic/martensitic phase transformation were determined for prediction of the hardening effect. In the experimental study, a diffractive optical kinoform (DOK) was used to customize a conventional Gaussian laser spot beam to a flat-top rectangular beam. A reasonable agreement between the theoretical predictions and the experimental measurements was obtained.

Excimer laser surface treatment of Ti–6Al–4V alloy was conducted with the aim of improving the pitting corrosion resistance of the alloy. Laser surface treatment was performed under two different gas environments, argon and nitrogen. The microstructure, phase and composition of the modified surface structure were analysed using TEM, XRD and EDX; the electrochemical behaviours of the untreated and the laser-treated specimens were evaluated by electrochemical polarization tests. Excimer laser surface treatment significantly increased the pitting potential of the Ti alloy, especially when the material was treated in argon gas, while a seven-fold reduction in corrosion current was obtained when the material was treated in nitrogen gas. These improvements are considered to be primarily due to the reduction of solute partitioning effect of detrimental Al segregated to the α phase. The N 2 -treated specimen, although it had the lowest corrosion current, had a pitting potential some 100 mV lower than that of the Ar-treated specimen. This is considered to be due to TiN precipitates acting as galvanic cathodes at high corrosion potentials.

This work aims to detect the peritoneal fluid proteomic patterns in endometriosis patients, build diagnostic models, and evaluate its clinical significance.The authors used SELDI-TOF-MS protein chip array technology to detect biomarkers of peritoneal fluid in endometriosis patients. Fourteen endometriosis patients and 16 persons without endometriosis as control group were tested.Four potential biomarkers (4428m/z, 6891m/z, 13766m/z, and 6427m/z) were found.This method showed great potential in screening better biomarkers for endometriosis.

Excimer laser surface treatment of 316LS bio-grade stainless steel (ASTM-F138) was conducted with the aim of enhancing the pitting corrosion resistance of the material. The experiment was performed under two different gas environments: air and nitrogen. The microstructure, phase and compositional changes after laser treatment were characterized by means of XRD, XPS and EDX; the resulting pitting corrosion resistance was evaluated by electrochemical polarization tests. The results show that excimer laser surface melting can effectively eliminate carbides and second phases alike, and also serves the function of homogenizing the microstructure. Nitrogen induced into the laser-treated surface could promote new precipitates and as a result lowered the corrosion resistance. On the other hand, laser treatment in a low partial pressure of nitrogen could enhance the corrosion resistance of 316LS stainless steel in that the active corrosion current was reduced and the passive range was widened.

Adsorption behavior of urea on silver electrode and the influence of thiourea on its adsorption in sulphuric acid solution were investigated by polarization curves and Surface Enhanced Raman Spectroscopy. Urea was found to undergo a condensation reaction on roughened silver electrode. Biuret was the condensation compound, and was adsorbed in the protonated form on the silver surface. Obvious synergistic mechanism between thiourea and protonated biuret was proposed.

Adsorption of thiourea (TU) and ethylthiourea( ETU) on roughened silver electrode was investigated using in situ surf. enhanced Raman spectroscopy(SERS) Using quantum chemistry and HSAB theories, the influences of electrode potential and the different substituent groups on SERS were disc i. TU is chemisorbed perpendicularly by Ag-S bond on silver at E = -0.3 V and adsorption of TU turns into a parallel orientation at E = -0.9 V. ETU is always chemisorbed at an angle from Ag. The adsorption of ETU is through and C=C and C=O groups at E = -0.3 V, and mainly through C=C at E = -0.9V.

Embedded in a flux of dehydrated B2O3, melts of pure germanium were undercooled by repeated melting and solidification of the specimens within a differential scanning calorimeter facility. The highest undercooling obtained in this way was 190K. The specific heat of the undercooled melt was measured by calorimetric diagnostics within the facility, and showed a linear dependence on temperature. The thermodynamic properties of germanium, such as the difference of Gibbs free energy, the difference of entropy, and the difference of enthalpy between the undercooled melt and the solid state, were derived from the measured specific heat.

Identification of proteomic alterations in epithelial ovarian tumorigenesis may facilitate the understanding of progression of this disease.Specific protein peak patterns were identified in 20 microdissected epithelial ovarian tumors (13 epithelial ovarian cancers (EOCs) and 7 low malignant potential (LMP) tumors), as well as in the matched normal cells. Protein profiles were generated by surface-enhanced laser desorption/ionization time of flight mass spectrometry (SELDI-TOF-MS) from all the different types of cells.Among seven protein peaks from EOC cells, six were significantly increased while one was decreased compared with normal cells, and three peaks from LMP cells were markedly increased while one was decreased compared with normal cells.The combination of SELDI and laser capture microdissection (LCM) is effective in finding the key molecules in ovarian tumorigenesis. Further identification of these protein peaks is important and these malignant protein signatures lend themselves to identification of populations at high-risk for EOC and for monitoring response to EOC chemopreventive agents.

The genetic data of MICA microsatellite were obtained by genotyping 577 samples in 13 population groups of China, which are Han-YN, Han-GD, Han-SD, Bai, Dai, Lahu, Li, Naxi, Sala, She, Tu, Wa and Zang-YN, with genescan. Five alleles have been observed in the population groups, which are A4, A5, A5.1, A6 and A9. A5 allele is the most frequent in all population groups except Lahu and Li, while the most frequent allele for Lahu and Li is A5. 1 and A4 respectively. The second most frequent allele is the A5.1 in Han-YN, Han-SD, Dai, Naxi, Sala, She, and Wa. The lest frequent allele for Han-YN, Han-GD, Lahu, Naxi, She, Wa is the A6 which is not observed in Li. A4 allele is the lest frequent in Han-SD, Bai, Dai, Sala, Tu, Zang-YN. The results show that the distribution of MICA microsatellite is different in these population groups, and the polymorphism information contents (PIC) of this microsatellite is high. It is a potential useful marker in the study of human origin and migration, personal identification, gene mapping and location, and disease diagnosis.

30 autosomal STRs of 6 Chinese populations (Bai, Naxi, Tu, Sala, Han in Shandong, She) were amplified by multiplex PCRs using fluerescein-labelled primers. Shriver's Dsw was estimated on the basis of the results of the genescanning and genotyping after running unnatural PAGE of the PCRs' products on ABI 377 sequencer. Phylogenetic trees were constructed by using Neighbor-Joining and UPGMA method based on Dsw, and then the genetic relationships among them were analyzed referring to some relative informations. Our results indicated that the genetic distance between Sala and Tu is near, 0.033. But the distances between Sala and other four populations are far, over 0.12; Tu is close to Naxi and Shandong Han, and the distances are 0.038, 0.063 respectively; The distance between Bai and Han is the nearest, 0.007, but there is a distance, 0.075, between Bai and Naxi, and a far distance, 0.112, between Bai and Tu; The distance between Naxi and Han is 0.100 and the distances between She and other 5 populations are all over 0.12. In both of the NJ and UPGMA phylogenetic trees, Naxi, Tu and Sala is one cluster and Bai and Han is another cluster. She is a single branch. These results, basically consistent with 6 Chinese populations' geographic distribution and histories, can provide some genetic information to comprehensively study their origin, migration, formation and development with their historical records and archaeological evidence.

Recently, percutaneous trigger digit release has been reported as a safe, effective office procedure. The purpose of this study was to further assess the safety and efficacy of this technique.From November, 1996, to August, 1997, 69 consecutive patients with 71 primary trigger digits were treated with percutaneous A1 pulley release. The operations were performed using the tip of a 19-gauge needle, mounted on a 3-ml syringe. The mean age of the patients was 66 years. The mean duration of follow-up was 21 weeks. The patients were prospectively classified into two groups according to age, sex, digit involved, duration of symptoms and whether or not they had had previous local steroid injection.Sixty-three digits were completely free of triggering. Residual triggering or inadequate release was found in eight digits at final follow-up. The success rate was not associated with sex, age, digit involved, duration of symptoms or history of local steroid injection. No major complications were found in this study, but minor complications included persistent local tenderness in nine digits and subcutaneous hematoma in six digits. Risk factors related to persistent local tenderness were female gender and trigger thumb.Percutaneous A1 pulley release is an effective, safe and convenient procedure for the treatment of trigger digits.

Nontraumatic avascular necrosis of the femoral head (ANFH) is a common disorder causing disability of the hip joint. The means for optimally treating this disease are still controversial. In this study we evaluated the relatively new technique of vascularized iliac bone grafting for treating ANFH.From March 1990 to March 1992, 17 hips (15 patients) with ANFH were treated using the vascularized iliac bone grafting technique in our hospital. The patients included 12 men and three women, with an average age of 38 years. Steinberg's classification was used to categorize the severity of hip disease. The clinical results were classified as excellent, good, fair and poor according to symptoms, hip function and roentgenographic changes after surgery. Life-table analysis was applied to assess graft survival and the log rank test was used to compare statistical differences between the steroid-related and nonsteroid-related groups.Cumulatively, 16 hips (14 patients), excluding one patient (one hip) lost to follow-up, were clinically evaluated for an average of 68 months. Among 12 hips at Steinberg stage II, eight progressed to stage IV, three to stage III and only one remained at stage II. Although most hips at stage II showed mild to moderate disease progression on plain radiography, 58% of the hips (7/12) that progressed to less than IVb showed good to excellent results. In the three hips at stage III, one progressed to stage IVa and two to stage V. In the two hips at stage IV, one remained at stage IV at final follow-up and the other was lost to follow-up. The steroid-related and nonsteroid-related groups did not differ with respect to clinical results. Both groups had 63% (5/8) good to excellent results (p0.05, log rank test). Only four hips were converted to prosthetic arthroplasties at final follow-up. Overall, 63% (10/16) of the hips had good to excellent results, 12% had fair results and 25% had poor results. Graft survival after seven years of follow-up was 63%.While treatment of ANFH still poses a challenge to orthopedic surgeons, the vascularized iliac bone grafting technique is a clinically acceptable option for treating the early stages of ANFH.

Using 45 rabbits, the authors made a research on the relationship between the experimental change of the stress-strain distribution and the tissues structural abnormalities of the cervical column. After having changed the stress and strain distribution on the rabbits' cervical vertebrae by letting them bow their heads, we measured the strain distribution in Vivo with resistant strain gauges, inspected the pathological changes of the cervical vertebrae, the nuchal ligaments, the capsular ligaments, the neck muscles and the attachments of the capsular ligament to bones, by ligh microscope and electron microscope. We found that the greater the level of the strain and the longer time the strain was loaded, the more evident the morphological abnormalities of the cervical vertebrae. The increase of the stress and strain could also cause degeneration of the nuchal ligaments, capsular ligaments and neck muscles. We believe that the abnormalities of the of the soft tissues around the cervical vertebral bones play an important part in the development of the cervical spondylosis. We think that the morphological changes of the cervical column is the basis of the biomechanical pathogenesis of the cervical spondylosis.

A series of plasmids was constructed to study the effect of two enhancers, the simian virus 40 72-base-pair repeat and the Harvey sarcoma virus 73-base-pair repeat, on the mouse beta maj-globin promoter. These plasmids contain the mouse beta maj-globin promoter linked to the Escherichia coli galK gene, thus allowing galactokinase enzyme activity to be used as a measure of promoter function. In CV-1 (primate) cells, it was found that an enhancer is required for optimal promoter activity and that the simian virus 40 (primate) enhancer increases galactokinase fourfold more than the Harvey sarcoma virus (mouse) enhancer. In L (mouse) cells, however, the Harvey sarcoma virus enhancer is 1.3-fold stronger than the simian virus 40 enhancer. These data support the hypothesis that enhancer activity can be species specific. Furthermore, when both enhancers are present on the same plasmid, their effect is additive on the beta-globin promoter whether the plasmid is in CV-1 cells or L cells.