Search

Both plastic and orthopedic surgeons manage care for urgent/emergent hand conditions. It is unclear if surgeon specialty affects patient outcomes of these cases. The purpose of this study was to evaluate differences in 30-day perioperative outcomes between plastic and orthopedic surgeons following distal upper extremity amputations.Patients who underwent distal upper extremity amputations between 2005 and 2016 were identified within the National Surgical Quality Improvement Program (NSQIP) database usingA total of 1583 cases met inclusion criteria. Orthopedic surgeons performed 981 cases (62.0%) and plastic surgeons performed 602 cases (38.0%). Finger amputations comprised the majority of procedures for both orthopedic and plastic surgeons (95.5% and 94.4%, respectively). Orthopedic surgeons had a lower operative time (41.7 ± 36.2 minutes vs 47.1 ± 40.9 minutes,Plastic and orthopedic surgeons achieved equivalent outcomes comparing 30-day perioperative complications following upper extremity amputations. These results support that both orthopedic and plastic surgeons provide similar quality distal upper extremity amputation care.Tant les plasticiens que les chirurgiens orthopédiques prennent en charge les cas d’affections urgentes ou d’extrême urgence touchant les mains. On ne sait pas si la spécialité chirurgicale a une incidence sur le pronostic des patients atteints de ces problèmes. La présente étude visait à évaluer les différences entre les résultats périopératoires des plasticiens et des chirurgiens orthopédiques 30 jours après des amputations distales des extrémités supérieures.Les patients qui ont subi une amputation distale des extrémités supérieures entre 2005 et 2016 ont été extraits de la base de données du Programme national d’amélioration de la qualité des soins chirurgicaux (NSQIP) à l’aide des codes du Catalogue des actes médicaux (CPT). Au moyen d’une analyse univariée, les chercheurs ont comparé les différences entre les interventions opératoires effectuées par les chirurgiens orthopédiques et les plasticiens, les caractéristiques démographiques des patients, leurs autres affections et leurs complications périopératoires au bout de 30 jours. Ils ont utilisé une correction de Bonferroni pour tenir compte de multiples comparaisons entre les complications.Au total, 1 583 cas respectaient les critères d’inclusion. Les chirurgiens orthopédiques ont opéré 981 cas (62,0 %) et les plasticiens, 602 cas (38,0 %). Les amputations des doigts représentaient la majorité des interventions effectuées par les chirurgiens orthopédiques et les plasticiens (95,5 % et 94,4 % respectivement). Les opérations pratiquées par les chirurgiens orthopédiques étaient plus courtes (41,7 ± 36,2 minutes par rapport à 47,1 ± 40,9 minutes, p = 0,008). Il n’y avait pas de différence quant à la proportion d’opérations d’urgence, de patients hospitalisés ou de catégories de plaies ni pour ce qui est de l’âge, du genre et de l’indice de masse corporelle. Les principales indications d’amputation étaient des traumatismes, la gangrène et l’ostéomyélite. Il n’y avait pas de différence entre les spécialités chirurgicales lors de l’évaluation des complications périopératoires au bout de 18 et 30 jours, y compris les décès, les réopérations, l’infection au foyer des infections et la déhiscence des plaies.Les plasticiens et les chirurgiens orthopédiques ont obtenu des résultats équivalents si l’on comparait les complications périopératoires après des amputations des extrémités supérieures au bout de 30 jours. Selon ces résultats, à la fois les chirurgiens orthopédiques et les plasticiens fournissent des soins de qualité semblables lors d’amputations distales des membres supérieurs.

BACKGROUND The purpose of this study was to identify the utilization rate and most common reasons for presentation to the emergency department (ED) after elective outpatient hand surgery and to determine preoperative risk factors for these ED visits. METHODS Patients who underwent elective hand surgery at an ambulatory surgery center between 2014 and 2015 were retrospectively evaluated using the New York and Florida State Databases. The primary outcome was all-cause 7- and 30-day ED utilization rates. Reasons for presentation to the ED were recorded and manually stratified. Bivariate and multivariate analyses were performed to identify independent predictors of ED utilization. RESULTS From 2014 to 2015, 212,506 procedures were identified; the 7- and 30-day ED visit rates were 1.8% and 4.4%, respectively. Postoperative pain was the most common cause of an ED visit after outpatient hand surgery at 7 days (25.4%) and 30 days (16.1%) postoperatively. Overall, 98% of patients presenting to the ED for postoperative pain were subsequently discharged home. After controlling for confounding, comorbid congestive heart failure, chronic lung disease, diabetes, renal failure, schizophrenia, and depression were independent risk factors for an ED visit at up to 30 days postoperatively. Those with Medicare insurance were 94% more likely to present to the ED within 30 days than those with private health insurance, whereas those with Medicaid were more than three times as likely to present to the ED as those with private insurance. DISCUSSION ED utilization after outpatient hand surgery is low, with postoperative pain being the most common cause of an ED visit at all time points. Nearly 98% of patients presenting to the ED for postoperative pain are subsequently discharged home. LEVEL OF EVIDENCE Level III, Retrospective Cohort.

The Landsat 9 mission will continue the legacy of Earth remote sensing that started in 1972. The Operational Land Imager 2 (OLI 2) is one of two instruments on the Landsat 9 satellite. The OLI 2 instrument is essentially a copy of the OLI instrument flying on Landsat 8. A key element of the OLI 2 instrument is the focal plane subsystem, or FPS, which consists of the focal plane array (FPA), the focal plane electronics (FPE) box, and low-thermal conductivity cables. This paper presents design details of the OLI 2 FPS. The FPA contains 14 critically-aligned focal plane modules (FPM). Each module contains 6 visible/near-IR (VNIR) detector arrays and three short-wave infrared (SWIR) arrays. A complex multi-spectral optical filter is contained in each module. Redundant pixels for each array provide exceptional operability. Spare detector modules from OLI were recharacterized after six years of storage. Radiometric test results are presented and compared with data recorded in 2010. Thermal, optical, mechanical and structural features of the FPA will be described. Special attention is paid to the thermal design of the FPA since thermal stability is crucial to ensuring low-noise and low-drift operation of the detectors which operate at -63°C. The OLI 2 FPE provides power, timing, and control to the focal plane modules. It also digitizes the video data and formats it for the solid-state recorder. Design improvements to the FPA-FPE cables will be discussed and characterization data will be presented. The paper will conclude with the status of the flight hardware assembly and testing.

The skeletal anatomy of the hand is composed of phalanges, metacarpal bones, and carpal bones. Its function is a product of the complex interactions between the power provided by the intrinsic and extrinsic musculature, the stability provided by the ligaments, and the structure provided by the bones, which serve as insertion and attachment sites for the muscles and ligaments. This article provides a detailed description of the skeletal anatomy of the human hand.

Background: Evaluating rotation during open reduction and internal fixation of a forearm fracture is of paramount importance. In challenging cases, surgeons may utilize radiographic relationships between proximal and distal radial and ulnar landmarks to assess rotational position. However, to our knowledge, limited anatomic data are available to confirm these relationships. Methods: Six hundred cadaveric radii and ulnae were obtained. Digital representations of the bicipital tuberosity, the radial styloid, the coronoid process, and the ulnar styloid were acquired, and the rotational profiles between respective landmarks were calculated. In order to validate the results and investigate the ability to differentiate rotated osseous positions, each bone was imaged in increments of 10° of rotation and the profile of each landmark was measured. Results: The radial styloid was at a mean of 158° ± 14° of supination relative to the bicipital tuberosity. The ulnar styloid was at a mean of 185° ± 14° of supination relative to the coronoid process. Imaging of the bones in increments of 10° of rotation supported the relationships above. It was also found that a 1-mm difference in profile size corresponded to up to 60° of rotation for the average ulna, compared with 10° for the average radius. Conclusions: Our findings suggest that using the bicipital tuberosity and the radial styloid to assess intraoperative rotation of the radius on anteroposterior radiographs may be of limited value; the landmarks were not generally 180° apart. Although the rotational positions of the coronoid process and the ulnar styloid were, on average, closer to 180°, surgeons should be aware of the wide range of normal anatomy as well as the inability to judge rotation by as much as 60°, even for an “ideal” ulna. Clinical Relevance: This study, to our knowledge, represents the first anatomic investigation of the rotational profiles between the osseous landmarks used to assess forearm rotation after fracture. We recommend that surgeons first image the bicipital tuberosity at its largest profile, supinate the arm 20°, and confirm that the radial styloid is at its largest profile. The ulna can then be assessed to support the lack of rotational deformity in the forearm.

Not all distal radius fractures, in terms of fracture anatomy and patient characteristics, are amenable to volar locked plating which has become a mainstay of treatment. Dorsal bridge plating for highly comminuted distal radius fractures with metaphyseal and diaphyseal extension has been shown to be a useful technique in attaining stability through ligamentotaxis. It is also useful in polytrauma patients requiring immediate weight bearing. The technique involves a closed reduction maneuver to reduce the fracture fragments with the application of longitudinal traction. The bridge plate is inserted through limited incisions over the radial shaft and the 2nd metacarpal, resting extraperiosteally in the 2nd dorsal compartment. The plate is secured with both locking and non-locking screws. Patients are allowed immediate weight bearing on the injured extremity through the forearm. The plate is removed after fracture healing, no earlier than 12 weeks. Studies have shown fracture union and functional range of motion postoperatively without excessive finger stiffness or reflex sympathetic dystrophy. Dorsal distal radius bridge plating is a useful technique in specific clinical situations.

Distal radius fractures involving the volar ulnar corner represent a significant challenge that may require the treating hand surgeon to deviate from the common approach of using a volar locking plate. Not only can these injuries be subtle and easy to miss but they can also be very challenging to treat due to their location and the small size of the fragment(s). Yet, they are critical for the stability of the radiocarpal and distal radioulnar joints, and often also constitute a major portion of the articular weight bearing surface of the wrist. The surgical approach must be carefully planned to be able to adequately access and address all of the fractured components of the distal radius, including the volar ulnar corner. Multiple methods of fixation may be used and combined, including fragment-specific plates, screws, K-wires, and sutures. With careful attention to the reduction and fixation techniques presented here, excellent outcomes can be achieved. Just as easily, however, disastrous consequences can result when this fragment is ignored or inadequately reduced or fixed.

Both operative and nonoperative treatment of hand fractures can result in numerous complications, including stiffness, malunion, nonunion, arthritis, infection, and complex regional pain syndrome. These complications are frequently encountered and are often challenging to treat. This article systematically outlines the diagnosis and treatment of each of these complications to achieve the best possible outcome for the patient's overall hand function.

Purpose To address the null hypothesis that surgeons shown radiographs of little finger metacarpal neck fractures with measured fracture angulation would recommend surgery as often as surgeons shown unmarked radiographs. Methods Members of the Science of Variation Group, an international collaboration of fully trained orthopedic and trauma surgeons, were asked to review 20 little finger metacarpal neck fracture cases, which included a vignette and 3 high-quality radiographs. Members were then randomized to review radiographs with or without measured fracture angulation on the lateral view and select operative or nonoperative management. Results Surgeons shown radiographs with measured angulation were more likely to recommend surgery, and there was less variability among these surgeons, particularly for fractures with less angular deformity. Conclusions Measured fracture angulation has a small but significant influence on treatment recommendations for little finger metacarpal neck fractures. Copyright (C) 2014 by the American Society for Surgery of the Hand. All rights reserved

To our knowledge, no report has been published of a flexor tendon rupture as a result of a closed phalangeal fracture. A 58-year-old woman with multiple medical comorbidities presented with a closed, apex volar fracture of her long finger proximal phalynx with clinically intact flexor digitorum profundus and superficialis tendons in zone 2 of the flexor tendon sheath. After 5 weeks of nonoperative treatment, the patient reported hearing a pop in her finger, and clinical findings suggested rupture of the flexor digitorum profundus and superficialis tendons. Intraoperatively, the nonreparable attritional rupture was underneath the A2 pulley. A bony prominence in the tendon sheath floor from the healed phalynx fracture made rerupture a concern with a tendon graft. A Hunter Active Tendon Implant (Wright Medical Technology, Inc, Arlington, Tennessee) was used to reconstruct the flexor digitorum profundus tendon to avoid a second procedure. The patient progressed well and had regained a functional arc of active finger range of motion by 2 months postoperatively. The Hunter Active Tendon Implant provided a suitable alternative to a 2-staged procedure, with the added benefit that a good tendon bed was developed in the event that a second procedure was needed.

The purpose of this retrospective cohort comparison study was to determine the effect of ulnar collateral ligament reconstruction on postoperative range of motion (ROM) in patients undergoing posttraumatic elbow contracture release. Twenty-four consecutive patients underwent elbow arthrolysis. Six patients also underwent simultaneous collateral ligament excision and reconstruction, and 18 did not require ligament excision. All patients followed the same postoperative rehabilitation program. Minimum follow-up was 12 months. Final flexion/extension ROMs were similar in both groups. No subjective reports of postoperative elbow instability occurred in either group. Ligament reconstruction and early postoperative motion can be safely performed in the setting of posttraumatic elbow capsulectomy without sacrificing ROM gain or compromising stability provided by the ligament reconstruction.

The Landsat missions are the longest continuous record of changes in the Earth's surface as seen from space. The next follow-on activity is the Landsat Data Continuity Mission (LDCM). The LDCM objective is to extend the ability to detect and quantitatively characterize changes on the global land surface at a scale where natural and man-made causes of change can be detected and differentiated. The Operational Land Imager (OLI) is one of two instruments on the LDCM spacecraft. OLI will produce science data for the reflective bands, which include 6 visible and near-infrared (VNIR) and 3 short-wave infrared (SWIR) bands. The OLI instrument utilizes a pushbroom design with 15.5 degree field of view. As a result, the OLI Focal Plane Array (FPA) cross track dimension is large, and the FPA is a critical technology for the success of the mission. The FPA contains 14 critically aligned Focal Plane Modules (FPM) and consists of 6916 imaging pixels in each of the 8 multi-spectral bands, and 13,832 imaging pixels in the panchromatic band. Prior to integration into the FPA, the FPMs were characterized for radiometric, spectral, and spatial performance. The Flight FPA has been built and its performance has also been characterized. In this paper, the critical attributes of the FPMs and FPA are highlighted. Detailed description of the FPM and FPA test sets are provided. The performance results that demonstrate compliance to the science mission requirements are presented.

The purpose of this study was to examine the effects of intra-articular epinephrine lavage on blood loss following total knee arthroplasty (TKA). Our retrospective study involved 189 patients who had primary cemented TKA by 1 of 2 surgeons. Surgeon 1 performed 41 procedures without and 53 with the epinephrine lavage. Surgeon 2 performed 41 procedures without and 54 with the epinephrine lavage. We compared calculated blood loss (CBL) for the patients in all 4 groups. We found no significant differences in CBL among the patients in the 4 patient groups. Our results show that an intra-articular epinephrine lavage does not affect blood loss after TKA.

Dorsal distraction bridge plates have traditionally been used as an “internal fixator” in the treatment of highly comminuted or unstable distal radius fractures, or as a supplemental construct to allow weight-bearing through the injured extremity. In this chapter, we describe potential applications of dorsal bridge plating in a patient who sustained bilateral distal radius fractures. Indications, surgical techniques, and postoperative protocols will be reviewed. We will also illustrate the use of bridge plating in primary and revision operations, followed by technical tips and tricks.

Lateral epicondylitis is a common condition affecting 1% to 3% of the population. Although the exact cause is still unknown, numerous theories have been put forth. One theory suggests a hypovascular zone at the origin of the common extensor mass. This study examines the microvascular supply of the lateral epicondyle and the common extensor mass, with the use of India ink injection and the Spalteholz tissue-clearing technique. Six fresh-frozen cadaveric arms underwent serial sectioning (coronal plane in five and axial plane in one) after vascular injection with India ink. Sections were cleared via a modified Spalteholz technique. Photographs were taken before and after the clearing procedure, and the microvascular pattern of the common extensor mass and lateral epicondyle was described. Two hypovascular zones were identified in the region of the lateral epicondyle. The first was noted at the proximal lateral epicondyle just distal to the supracondylar ridge and the second 2 to 3 cm distal to the lateral epicondyle on the deep surface of the common extensor tendon. Two regions of hypovascularity were noted at the lateral epicondyle and within the common extensor origin. These hypovascular regions may preclude the normal inflammatory cascade and healing response to microtearing in this region. Thus, these zones may play a role in the etiology of lateral epicondylitis.

Purpose To report our experience using a fixed-angle volar plate in conjunction with a corrective osteotomy and cancellous bone graft for the treatment of distal radius malunions with dorsal angulation in 4 patients. Methods Four consecutive patients had a volarly based opening wedge osteotomy with a fixed angle volar plate and cancellous bone grafting for the treatment of a dorsally angulated distal radius malunion. Data collected retrospectively included a visual analog pain scale, grip strength, range of motion, radiographic parameters, and each patient’s subjective functional outcomes as measured by the Disabilities of the Arm, Shoulder, and Hand questionnaire. Motion, strength, and radiographic values were compared with the contralateral arm for each patient. Results The average time from initial fracture to corrective osteotomy was 346 days. The average length of follow-up evaluation was 13.5 months. The flexion–extension arc of motion increased an average of 21° to a value of 84% of the contralateral side; the pronation–supination arc of motion increased an average of 20° to a value of 98% of the contralateral side. The average tilt of the radius improved from 26° extension to 2° extension; the average radial inclination improved from 22° to 24°; the average ulnar variance excluding the 1 patient who had a distal ulna resection improved from 5 mm to 1 mm. The average retrospective Disabilities of the Arm, Shoulder, and Hand score improved from 30 to 7; the average retrospective visual analog pain scale score improved from 4.5 to 1. The average grip strength increased from 20 to 29 kg, which corresponded to 73% of the contralateral extremity. Conclusions The rigid characteristics of fixed angle volar plates can provide an alternative to the traditional techniques of distal radius osteotomy including structural bone grafting and dorsal plate fixation or external fixation. In addition these plates are strong enough to allow for early postoperative motion. Type of study/level of evidence Therapeutic, Level IV.

Purpose To test the null hypothesis that there are no differences in the priorities and preferences of patients with idiopathic trigger finger (TF) and hand surgeons. Methods One hundred five hand surgeons of the Science of Variation Group and 84 patients with TF completed a survey about their priorities and preferences in decision making regarding the management of TF. The questionnaire was structured according the Ottawa Decision Support Framework for the development of a decision aid. Results Patients desired orthotics more and surgery less than physicians. Patients and physicians disagreed on the main advantage of several treatment options for TFs and on disadvantages of the treatment options. Patients preferred to decide for themselves after receiving advice, whereas physicians preferred a shared decision. Patients preferred booklets, and physicians opted for Internet and video decision aids. Conclusions Comparing patients and hand surgeons, there were some differences in treatment preferences and perceived advantages and disadvantages regarding idiopathic TF—differences that might be addressed by a decision aid. Clinical relevance Information that helps inform patients of their options based on current best evidence might help them understand their own preferences and values, reduce decisional conflict, limit surgeon-to-surgeon variations, and improve health.

This paper describes work in the area of hybridization of optoelectronic devices and passive optical waveguide elements. The potential coupling efficiency of a laser diode to silica waveguides and fibers was improved by waveguide engineering. These diodes displayed far field angels of 16.5 degrees in the transverse direction. Strategies for passively aligning the didoes to planar silica waveguides on silicon substrates are also presented.