Search

OBJECTIVES: High energy long bone fractures with critical bone loss are at risk for nonunion without strategic intervention. We hypothesize that a synthetic membrane implanted at a single stage improves bone healing in a preclinical nonunion model. METHODS: Using standard laboratory techniques, microspheres encapsulating bone morphogenic protein-2 (BMP2) or platelet derived growth factor (PDGF) were designed and coupled to a type 1 collagen sheet. Critical femoral defects were created in rats and stabilized by locked retrograde intramedullary nailing. The negative control group had an empty defect. The induced membrane group (positive control) had a polymethylmethacrylate spacer inserted into the defect for four weeks and replaced with a bare polycaprolactone/beta-tricalcium phosphate (PCL/β-TCP) scaffold at a second stage. For the experimental groups, a bioactive synthetic membrane embedded with BMP2, PDGF or both enveloped a PCL/β-TCP scaffold was implanted in a single stage. Serial radiographs were taken at 1, 4, 8, and 12 weeks postoperatively from the definitive procedure and evaluated by two blinded observers using a previously described scoring system to judge union as primary outcome. RESULTS: All experimental groups demonstrated better union than the negative control (p=0.01). The groups with BMP2 incorporated into the membrane demonstrated higher average union Mehta scores than the other groups (p=0.01). The induced membrane group performed similarly to the PDGF group. Complete union was only demonstrated in groups with BMP2-eluting membranes. CONCLUSIONS: A synthetic membrane comprised of type 1 collagen embedded with controlled release BMP2 improved union of critical bone defects in a preclinical nonunion model.

To determine the short-term results of surgical treatment with dual posterolateral and posteromedial approaches for fractures of the entire posterior tibial plafond and secondarily to identify common fracture characteristics.Retrospective.Single academic Level 1 trauma center.Thirty-five patients with posterior pilon fractures followed until fracture union (minimum 3 months).Surgical treatment using simultaneous combined posterolateral and posteromedial exposures for fracture reduction and internal fixation.(1) Surgical outcomes including rate of wound complications and accuracy of the articular reduction. (2) Fracture characteristics including the incidence of articular impaction, comminution interfering with reduction, syndesmosis injury, and the type of fibula fracture.The rate of wound problems was low (6%), and 94% of patients had an articular reduction with less than 1 mm of step or gap. There were high rates of articular comminution (83%) and posteromedial articular impaction (63%) and a 17% rate of syndesmosis injury requiring repair.Surgical fixation using simultaneous, combined posterolateral and posteromedial approaches for posterior pilon fractures had a low rate of wound complications and was an effective strategy for obtaining an accurate reduction. The rate of syndesmotic instability requiring fixation was lower than previous work reporting on fixation using a single approach. This may be a useful technique for surgeons who treat these injuries. Careful assessment of the preoperative imaging is required in patients with posterior pilon fractures.Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Background To report mid-term clinical outcomes after radial head arthroplasty for terrible-triad fracture dislocations. Methods Fourteen patients with terrible triad fracture dislocations treated acutely with arthroplasty and minimum 3-year follow-up. Mayo Elbow Performance Scale (MEPS) and QuickDASH scores. Results All patients achieved excellent (58%) or good (42%) results on the MEPS. Average QuickDASH score was 9.1 (range 0-25). Reoperation rate was 28%. Conclusions Acute radial head arthroplasty as a treatment for nonreconstructable radial head fractures in the setting of terrible triad elbow injuries demonstrates good midterm functional outcomes. Level of Evidence Level IV; Retrospective Case Series Study

Achieving durable mechanical stability in geriatric intertrochanteric proximal femur fractures remains a challenge. Concomitant poor bone quality, unstable fracture patterns, and suboptimal reduction are additional risk factors for early mechanical failure. Cement augmentation of the proximal locking screw or blade is one proposed method to augment implant anchorage. The purpose of this review is to describe the biomechanical and clinical evidence for cement augmentation of geriatric intertrochanteric fractures, and to elaborate indications for cement augmentation. The PubMed database was searched for English language studies up to January 2021. Studies that assessed effect of calcium phosphate or methylmethacrylate cement augmentation during open reduction and internal fixation of intertrochanteric fractures were included. Studies with sample size

OBJECTIVE We sought to determine if white-light three-dimensional (3D) body scanning can identify clinically relevant shoulder girdle deformity after displaced diaphyseal clavicle fracture (DCF). METHODS Adult patients with DCF (OTA/AO 15A) were prospectively enrolled. Four subcutaneous osseous landmarks were used to measure shoulder girdle morphology of the injured and uninjured shoulder. Measurements were made both manually with a tape measure and digitally with a white-light 3D scanner. Bilateral radiographs were obtained, and clavicle length was recorded. Quick-Disabilities of the Arm, Shoulder, and Hand surveys were administered at injury and at 6 and 12 weeks. RESULTS Twenty-two patients were included in the study. At the initial visit, all patients had significant differences in deformity measurements between injured and uninjured shoulders as measured by 3D scanning. There was no difference between shoulders measured using manual measurements. At 6 and 12 weeks, shoulder asymmetry was significantly less in patients treated with surgery compared with nonoperative patients as measured by the 3D scanner alone. Clavicle shortening measured on 3D scanning had weak and moderate positive correlations to radiographs (R = 0.27) and manual measurements (R = 0.53), respectively. Patients treated with surgery had significant functional improvements by 6 weeks, and a similar improvement was not seen until 12 weeks in nonsurgical patients. CONCLUSION White-light 3D scanning was able to identify and monitor clinically relevant shoulder girdle deformity after DCF. This tool may become a useful adjunct to clinical examination and radiographic assessment, when determining clinically relevant deformity thresholds. In the future, quantifying and understanding shoulder deformity may inform clinical decision making in these patients. LEVEL OF EVIDENCE Prognostic Level IV. See Instructions for Authors for a complete description of levels of evidence.

BACKGROUND The increasing proportion of telemedicine and virtual care in orthopaedic surgery presents an opportunity for upstream delivery of patient facing tools, such as decision aids. Displaced diaphyseal clavicle fractures (DDCFs) are ideal for a targeted intervention because there is no superior treatment, and decisions are often dependent on patient's preference. A decision aid provided before consultation may educate a patient and minimize decisional conflict similarly to inperson consultation with an orthopaedic traumatologist. METHODS Patients with DDCF were enrolled into 2 groups. The usual care group participated in a discussion with a trauma fellowship-trained orthopaedic surgeon. Patients in the intervention group were administered a DDCF decision aid designed with the International Patient Decision Aid Standards. Primary comparisons were made based on a decisional conflict score. Secondary outcomes included treatment choice, pain score, QuickDASH, and opinion toward cosmetic appearance. RESULTS A total of 41 patients were enrolled. Decisional conflict scores were similar and low between the 2 groups: 11.8 (usual care) and 11.4 (decision aid). There were no differences in secondary outcomes between usual care and the decision aid. DISCUSSION Our decision aid for the management of DDCF produces a similarly low decisional conflict score to consultation with an orthopaedic trauma surgeon. This decision aid could be a useful resource for surgeons who infrequently treat this injury or whose practices are shifting toward telemedicine visits. Providing a decision aid before consultation may help incorporate patient's values and preferences into the decision-making process between surgery and nonoperative management. LEVEL OF EVIDENCE Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Excessive fracture site collapse and shortening in intertrochanteric femur fractures alter hip biomechanics and patient outcomes. The purpose of the study was to compare extent of collapse in cephalomedullary nails with blades or lag screws. We hypothesized that there would be no difference in collapse between helical blades and lag screws. Retrospective cohort study. Single U.S. Level I Trauma Center. 171 consecutive patients treated with cephalomedullary nails with either lag screw or blade for AO/OTA 31A1-3 proximal femur fractures and minimum 3-month follow-up. Lag screw or helical blade in a cephalomedullary nail. The primary outcome was fracture site collapse at 3 months. There was a significantly higher proportion of reverse-oblique and transverse intertrochanteric femur fractures (31-A3) in the lag screw group (15/42 vs 25/129). A3 patterns were associated with more collapse. There was significantly less collapse in the blade group (median 4.7 mm, inter-quartile range 2.5–7.8 mm) than the screw group (median 8.4 mmm, inter-quartile range 3.7–11.2 mm, p 0.006). Median collapse was no different between blades and screws when comparing stable and unstable patterns. However, blades were independently associated with 2.5 mm less collapse (95%CI − 4.2, − 0.72 mm, p 0.006) and lower likelihood of excessive collapse (> 10 mm at 3 months, OR 0.3, 95% CI 0.13–0.74, p 0.007), regardless of fracture pattern. Helical blades are independently associated with significantly less collapse than lag screws in intertrochanteric proximal femur fractures, after adjusting for unstable fracture patterns. In fracture patterns at risk for collapse, surgeons can consider use of a helical blade due to its favorable sliding properties compared to screws.

To evaluate whether a single proximal interlocking bolt was sufficient during the treatment of extra-articular femur fractures with retrograde medullary nailing.Retrospective comparative study.Academic Level 1 trauma center.The study included 136 patients with extra-articular femur fractures treated with retrograde medullary nailing who met inclusion and follow-up criteria.The intervention included surgical treatment for a femur fracture with retrograde medullary nailing, with comparisons made between those treated with a single proximal interlocking (1 IL) bolt and those treated with 2 proximal interlocking bolts (2 IL).The main outcome measurements were as follows: (1) rate of nonunion and (2) rate of catastrophic implant failure.There was no difference in the rate of nonunion requiring surgical intervention between the 2 groups. There were no catastrophic failures in either group.A single proximal interlocking bolt may be sufficient when using retrograde nailing for the treatment of extra-articular femur fractures.Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

The purpose of the study was to compare treatment outcomes after short or long cephalomedullary nailing for intertrochanteric femur fractures. A systematic review of perioperative outcomes after short or long cephalomedullary nailing for intertrochanteric femur fractures was performed. The following databases were used: using the Cochrane Database of Systematic Reviews, the Cochrane Central Register of Controlled Trials, PubMed (1980–2019), and MEDLINE (1980–2019). The queries were performed in June 2019. The following search term query was used: “Intramedullary Nail AND Intertrochanteric Fracture OR “Long OR Short Nail AND intertrochanteric Fracture.” Studies were excluded if they were “single-arm” studies (i.e., reporting on either long or short CMN but not both), or did not report at least one of the outcomes being meta-analyzed. Furthermore, cadaveric studies, animal studies, basic science articles, editorial articles, surveys and studies were excluded. Two investigators independently reviewed abstracts from all identified articles. Full-text articles were obtained for review if necessary, to allow further assessment of inclusion and exclusion criteria. Additionally, all references from the included studies were reviewed and reconciled to verify that no relevant articles were missing from the systematic review. Short nails were associated with statistically significantly less estimated blood loss and operative time compared to long nails. There were no significant differences in transfusion rates, implant failures or overall re-operation rates between implant lengths. Similarly, there was no significant difference in peri-implant fracture between implant lengths. Overall, the available clinical evidence supports the use of short cephalomedullary nails for the majority of intertrochanteric femur fractures. Meta-analysis; Level III, therapeutic.

OBJECTIVES The management of geriatric distal femur fractures is controversial, and both primary distal femur replacement (DFR) and surgical fixation (SF) are viable treatment options. The purpose of this study was to compare patient outcomes after these treatment strategies. DATA SOURCES PubMed, Embase, and Cochrane databases were searched for English language articles up to April 24, 2020, identifying 2129 papers. STUDY SELECTION Studies evaluating complications in elderly patients treated for distal femur fractures with either immediate DFR or SF were included. Studies with mean patient age

OBJECTIVES Accurately stratifying patients in the preoperative period according to mortality risk informs treatment considerations and guides adjustments to bundled reimbursements. We developed and compared three machine learning models to determine which best predicts 30-day mortality after hip fracture. METHODS The 2016 to 2017 National Surgical Quality Improvement Program for hip fracture (AO/OTA 31-A-B-C) procedure-targeted data were analyzed. Three models-artificial neural network, naive Bayes, and logistic regression-were trained and tested using independent variables selected via backward variable selection. The data were split into 80% training and 20% test sets. Predictive accuracy between models was evaluated using area under the curve receiver operating characteristics. Odds ratios were determined using multivariate logistic regression with P < 0.05 for significance. RESULTS The study cohort included 19,835 patients (69.3% women). The 30-day mortality rate was 5.3%. In total, 47 independent patient variables were identified to train the testing models. Area under the curve receiver operating characteristics for 30-day mortality was highest for artificial neural network (0.92), followed by the logistic regression (0.87) and naive Bayes models (0.83). DISCUSSION Machine learning is an emerging approach to develop accurate risk calculators that account for the weighted interactions between variables. In this study, we developed and tested a neural network model that was highly accurate for predicting 30-day mortality after hip fracture. This was superior to the naive Bayes and logistic regression models. The role of machine learning models to predict orthopaedic outcomes merits further development and prospective validation but shows strong promise for positively impacting patient care.

Cephalomedullary nails are a commonly used implant for the treatment of many pertrochanteric femur fractures and are available in short and long configurations. There is no consensus on ideal nail length. Relative advantages can be ascribed to short and long intramedullary nails, yet both implant styles share the potentially devastating complication of peri-implant fracture. Determining the clinical sequelae after fractures below nails of different lengths would provide valuable information for surgeons choosing between short or long nails. Thus, the purpose of the study was to compare injury patterns and treatment outcomes following peri-implant fractures below short or long cephalomedullary nails. This was a multicenter retrospective cohort study that identified 33 patients referred for treatment of peri-implant fractures below short and long cephalomedullary nails (n = 19 short, n = 14 long). We compared fracture pattern, treatment strategy, complications, and outcomes between these two groups. Short nails were associated with more diaphyseal fractures (odds ratio [OR] 13.75, CI 2.2–57.9, p 0.002), which were treated more commonly with revision intramedullary nailing (OR, infinity; p 0.01), while long nails were associated with distal metaphyseal fractures (OR 13.75, CI 2.2–57.9, p 0.002), which were treated with plate and screw fixation (p 0.002). After peri-implant fracture, there were no differences in blood loss, operative time, weight bearing status, or complication rates based on the length of the initial nail. In patients treated with revision nailing, there was greater estimated blood loss (EBL, median 300 cc, interquartile range [IQR] 250–1200 vs median 200 cc, IQR 100–300, p 0.03), blood product utilization and complication rates (OR 11.1, CI 1.1–135.7, p 0.03), but a trend toward unrestricted post-operative weight-bearing compared to patients treated with plate and screw constructs. Understanding fracture patterns and patient outcomes after fractures below nails of different lengths will help surgeons make more informed implant choices when treating intertrochanteric hip fractures. Revision to a long nail for the treatment of fractures at the tip of a short nail may be associated with increased patient morbidity.

Study design Retrospective cohort. Summary of background data Heterotopic ossification (HO) about the hip is a debilitating condition that can occur after fixation for acetabular fractures, total hip replacement, or polytrauma with closed head injuries. No classification exists that informs surgical treatment. Purpose To establish a classification system for HO about the hip by reviewing a consecutive series of HO at a single institution. It was hypothesized that HO about the hip could be grouped into a novel classification scheme based upon the location and involved structures of the hip. Methods Retrospective chart review of single center's case log for HO excision from 2004 to 2018 was performed. Inclusion criteria included all patients undergoing excision of heterotopic bone excision about the hip. Demographic data, pre and post hip range of motion, surgical approach for each surgery, index surgery date and interval to excision are reported as well as presence and location of HO and Brooker classification. Results A total of 36 patients (21 men and 15 women) and 40 hips were identified meeting inclusion criteria. The mean age at the time of the index surgery was 47 (range, 16-77 years). Traumatic injury with fracture (35%) included 9 acetabular fractures (22%), 2 long bone fractures (5%) treated with intramedullary devices, one displaced femoral neck fracture (2%), and one pelvic ring injury (2%). Total hip arthroplasty accounted for 32% of patients. Brooker classification was type 4 (35%), 3 (25%), 2 (23%), 1(17%) which translated to 55% anterior, 48% posterior, 3% medial with respect to location. Average improvement in hip flexion and abduction was 22 and 8°, respectively. Conclusion This study identified discrete locations for heterotopic ossification following hip or acetabulum surgery. Both posterior and anterior structures are implicated in the formation of HO, and this investigation presents a novel classification to guide surgical approach for HO excision based upon location.

Intra-articular screw cut-out is a potential complication of intertrochanteric femur fracture fixation with a cephalomedullary nail. Cement augmentation of fixation in the proximal segment offers the prospect of increased stability and fewer complications, but clinical experience with non-resorbable cement is limited. To determine the handling properties and efficacy of this new technique, we performed a retrospective propensity-matched cohort of forty-four geriatric intertrochanteric femur fractures treated with a cephalomedullary nail with (n = 11) or without (n = 33) augmentation with non-resorbable cement injected into the proximal segment. In the patients treated with cement augmentation, at minimum 3-month follow-up, there were no instances of intra-articular cut-out, and no increase in re-operation compared to conventional fixation. Cement augmentation appears to be safe and effective in geriatric intertrochanteric femur fractures to mitigate risk of cut-out.

The optimal management of valgus-impacted femoral neck fractures remains controversial. Internal fixation is associated with significant rates of re-operation, while historical non-operative management strategies consisting of prolonged bed rest also resulted in patient morbidity. Our hypothesis was that screw fixation would have comparable failure rates to non-operative treatment and immediate mobilization for valgus-impacted femoral neck fractures. Retrospective cohort at a single academic Level I trauma center of patients with valgus-impacted femoral neck fractures (AO/OTA 31-B1) treated with percutaneous screw fixation (n = 97) or non-operatively (n = 28). Operative treatment consisted of percutaneous screw fixation. Non-operative treatment consisted of early mobilization. The primary outcome was a salvage operation. Patient demographics were assessed between groups. More non-operatively treated patients were permitted unrestricted weight-bearing (WBAT; p = 0.002). There was no increase in complication rates or mortality, and return to previous ambulatory status was comparable between operatively and non-operatively treated patients. 35.7% (10/28) of non-operatively treated patients underwent a subsequent operation, compared to 15.5% (15/97) of patients with screw fixation (p = 0.03). Only WBAT was independently associated with treatment failure (OR 3.1, 95%CI 1.2–8.3, p =0.02). WBAT was predictive of treatment failure only in the non-operatively treated group (64.3%, 9/14 WBAT vs 8.3%, 1/12 partial, p =0.005). After controlling for weight-bearing restrictions, we found no difference in failure rates between non-operative treatment and screw fixation. Non-operative treatment with partial weight-bearing had low failure rates, comparable complication and mortality rates, and equivalent functional outcomes to operative treatment and is reasonable if a patient would like to avoid surgery and accepts the risk of subsequent arthroplasty. Overall, there were relatively high failure rates in all groups.

This study evaluated the influence of fracture obliquity and locking screw configuration on interfragmentary motion during torsional loading of distal metaphyseal tibial fractures fixed by intramedullary (IM) nailing. The stability of six IM nail locking screw configurations used to fix distal metaphyseal tibial fractures of various obliquities was evaluated. A coronal osteotomy from proximal lateral to distal medial was made in sawbone tibiae at different obliquities from 0° to 60°. After fixation, motion at the fracture was assessed during internal and external rotation tests to 7 Nm under two compressive loading conditions: 20 N and 500 N. With results organized by interlocking configuration, significant differences in interfragmentary rotation between fracture obliquities are observed when the number of interlocking screws is decreased to one distal static and one proximal dynamic during internal rotation. During external rotation testing, significant rotational differences between fracture obliquities are encountered with two distal static screws and one proximal dynamic. No significant differences were seen between different distal interlocking screw orientations (two parallel versus perpendicular distal screws) for all fracture obliquity patterns tested. Fracture obliquity influences rotational stability which can be mitigated by interlocking screw configurations when nailing distal tibia fractures. At least two distal and one proximal interlocking screw in a static mode is recommended to resist torsional loading of distal tibia fractures undergoing intramedullary nailing. The addition of more interlocking screws than this did not significantly alter control of torsional displacement with load.

INTRODUCTION To determine whether drilling energy correlates with bone mineral density (BMD), maximum insertion torque (MIT), maximum screw compression, and pullout strength (POS). METHODS Ten cadaver tibias were used for testing. Unicortical pilot holes were drilled and the drilling energy measured. Drill site bone quality was determined with microcomputed tomography. Drill holes were randomly assigned to POS or MIT testing using 3.5-mm cortical screws engaging only the near cortex. Pearson correlation coefficients were calculated to determine the relationship between drilling energy, BMD, POS, MIT, and maximum screw compression. RESULTS Drilling energy was correlated with BMD (P < 0.001). Compared with BMD, drilling energy had a better correlation with MIT, maximum screw compression, and POS. Maximum screw compression also correlated with MIT (P = 0.012). CONCLUSIONS Drilling energy better correlates with MIT, maximum screw compression, and POS compared with BMD in cadaver cortical bone. Dynamically measuring drilling energy may help inform the orthopaedic surgeon as to the quality of the bone before insertion of implants.

This study examined the outcomes and complications after treatment of unstable distal clavicle fractures with hook or locking plate fixation. A retrospective search was performed of all acute distal clavicle fractures treated with open reduction and internal fixation from 2009 to 2019 at a Level I trauma center. Patients were separated into hook and locking plate fixation groups. Rates of union, complications, and reoperation, were extracted. QuickDASH (Disabilities of Arm, Shoulder, and Hand) scores were determined. Thirty-one patients met the inclusion criteria and were included in the study. Of these, 12 patients were treated with hook plates and 19 were treated with locking plates. All fractures healed without loss of reduction, regardless of implant selection. There were no immediate or long-term complications in either group. 83% of hook plate patients underwent planned implant removal, while 37% of locking plate patients requested implant removal secondary to irritation. QuickDASH scores were comparable and excellent in both groups. Hook and locking plate fixation for Neer type-II and type-V distal clavicle fractures have comparably high rates of union. Hook plates were removed routinely per protocol, while locking plates were removed only if symptomatic and occurred significantly less often.

Purpose The purpose of this study was to evaluate the safety and efficacy of using lower profile 2.4/2.4 mm and 2.0/2.4 mm dual mini-fragment plate constructs for fixation of diaphyseal clavicle fractures. Methods This was a retrospective case series of all displaced diaphyseal clavicle fractures treated with 2.4/2.4 and 2.0/2.4 dual mini-fragment plate constructs at a single level-one trauma center. Postoperative complications and fracture healing rates were recorded. A subset of patients with long-term follow up was used to determine the rate of reoperation for symptomatic implant removal. Results All 36 identified fractures healed without loss of reduction or implant failure. There was one superficial infection and no deep infections or cases of wound dehiscence. Twenty patients from the entire cohort had longer-term follow up available to assess the reoperation rate for symptomatic implant removal. Two patients (10%) underwent symptomatic implant removal, and one patient with retained implants was planning on future removal due to soft-tissue irritation; this combined to a projected reoperation rate of 15% for symptomatic implant removal. Conclusion Dual mini-fragment plating of diaphyseal clavicle fractures, using 2.4/2.4 mm and 2.0/2.4 mm plate combinations, creates a lower profile construct that reliably maintains fracture reduction to healing, and has a low rate of reoperation for symptomatic implant removal.

Objectives To map the proximal ulnar articular margins and ensure safe extraarticular placement of implants. Methods Ten fresh frozen adult elbow cadaver specimens were obtained. Radiopaque wire was applied to the articular margin of the articular facets and the central trochlear ridge of the proximal ulna. Fluoroscopic images were obtained demonstrating the articular facet margins. Radiographic measurements were performed and used to identify relative safe screw zones. Results All specimens demonstrated marked extension of the ulnar and radial facets dorsal to the central trochlear ridge. The dorsal extent of the ulnar facets from the central trochlear ridge averaged 9.7 mm (range, 7.9-13 mm; SD, 1.5 mm) and 6.2 mm (range, 3.4-9.4 mm; SD, 1.9 mm), respectively. The average footprint of the posterior ulnar facet occupied 44% (±4.9%) of the total ulnar height from the dorsal cortex to the trochlear ridge. Conclusions The articular margins of the anterior and posterior facets of the proximal ulna are challenging to identify radiographically. A surgical "at-risk zone" exists within 9.7 mm from the radiographic margin of the central trochlear ridge. Implants placed within this zone have the potential to violate the articular surface.

To determine if screw fixation across a cement mantle is safe and effective during plate fixation of well-fixed periprosthetic femur fractures.Retrospective cohort study.Academic Level I Trauma Center.Twenty-eight patients with AO/OTA 32A[B1] or 32A[C] periprosthetic femur fractures treated with open reduction and internal plate and screw fixation after cemented or uncemented hip arthroplasty.Screw placement into the cement mantle during internal fixation.Primary outcome was revision arthroplasty for aseptic loosening. Secondary outcomes included radiographic evidence of aseptic loosening, infection, nonunion, implant failure, and overall reoperation rate.There were 28 patients who met inclusion criteria. A total of 9 patients had screws placed in the cement mantle while the remaining 19 patients had screws placed around an uncemented stem. At a mean of 3.7-year follow-up, there were no cases of revision arthroplasty or aseptic loosening in either group. There were no significant differences in rates of infection, nonunion, implant failure, or reoperation rate between patients who had screw placement into a cement mantle vs around an uncemented stem.Drilling into the cement mantle during fixation of a periprosthetic femur fracture around a well-fixed cemented hip stem appears safe and effective. When possible, surgeons can consider bicortical screws around a cemented stem, given the biomechanical advantages over unicortical screw or cerclage fixation. Larger prospective trials confirming the safety of this technique are warranted prior to routine implementation.III.

INTRODUCTION: Though long-term functional outcomes of olecranon fracture plate fixation are favorable, postoperative implant irritation commonly leads to elective removal. We hypothesized that mini-fragment plates will decrease implant removal compared to precontoured plates. METHODS: Patients with isolated olecranon fracture (AO/OTA 2U1–B1) treated with plate fixation were retrospectively reviewed. Patients were stratified into groups based on whether they underwent open reduction and internal fixation with a (1) surgeon contoured mini-fragment or (2) precontoured olecranon-specific plate. Rates of symptomatic implants and implant removal were compared. RESULTS: 98 and 32 patients were treated with precontoured and mini-fragment plates, respectively. Baseline demographics and comorbidities were similar. Mean follow-up was 20.6 months. There were no differences in rates of postoperative complication (22/98, 22.4% vs. 5/32, 15.6%; p = 0.41) or reoperation (37/98, 37.8% vs. 8/32, 25%; p = 0.19). Symptomatic implants were common in the precontoured cohort (44/98, 44.9% vs. 7/32, 21.9%; p

Tibial plateau fractures with an ipsilateral compartment syndrome are a clinical challenge with limited guidance regarding the best time to perform open reduction and internal fixation (ORIF) relative to fasciotomy wound closure. This study aimed to determine if the risk of fracture-related infection (FRI) differs based on the timing of tibial plateau ORIF relative to closure of ipsilateral fasciotomy wounds.A retrospective cohort study identified patients with tibial plateau fractures and an ipsilateral compartment syndrome treated with 4-compartment fasciotomy at 22 US trauma centers from 2009 to 2019. The primary outcome measure was FRI requiring operative debridement after ORIF. The ORIF timing relative to fasciotomy closure was categorized as ORIF before, at the same time as, or after fasciotomy closure. Bayesian hierarchical regression models with a neutral prior were used to determine the association between timing of ORIF and infection. The posterior probability of treatment benefit for ORIF was also determined for the three timings of ORIF relative to fasciotomy closure.Of the 729 patients who underwent ORIF of their tibial plateau fracture, 143 (19.6%) subsequently developed a FRI requiring operative treatment. Patients sustaining infections were: 21.0% of those with ORIF before (43 of 205), 15.9% at the same time as (37 of 232), and 21.6% after fasciotomy wound closure (63 of 292). ORIF at the same time as fasciotomy closure demonstrated a 91% probability of being superior to before closure (RR, 0.75; 95% CrI, 0.38 to 1.10). ORIF after fasciotomy closure had a lower likelihood (45%) of a superior outcome than before closure (RR, 1.02; 95% CrI; 0.64 to 1.39).Data from this multicenter cohort confirms previous reports of a high FRI risk in patients with a tibial plateau fracture and ipsilateral compartment syndrome. Our results suggest that ORIF at the time of fasciotomy closure has the highest probability of treatment benefit, but that infection was common with all three timings of ORIF in this difficult clinical situation.

Background Septic arthritis is an orthopedic emergency requiring immediate surgical intervention. Current diagnostic standard of care is an invasive joint aspiration. Aspirations provide information about the inflammatory cells in the sample within a few hours, but there is often ambiguity about whether the source is infectious (e.g. bacterial) or non-infectious (e.g. gout). Cultures can take days to result, so decisions about surgery are often made with incomplete data. Novel diagnostics are thus needed. The "Sepsis MetaScore" (SMS) is an 11-mRNA host immune blood signature that can distinguish between infectious and non-infectious acute inflammation. It has been validated in multiple cohorts across heterogeneous clinical settings. Aim To study whether the SMS holds diagnostic validity in determining the etiology of acute arthritis. Methods We conducted a blinded, prospective, non-interventional clinical study of the SMS. All patients undergoing work-up for a septic primary joint were enrolled. Patients proceeded through the normal standard-of-care pathway, including joint aspiration and inflammatory labs [white blood cell (WBC), erythrocyte sedimentation rate (ESR), C-reactive protein (CRP)]. Venous blood was also drawn into PAX gene RNA-stabilizing tubes and mRNAs were measured using Nano String nCounter™. SMS was calculated blinded to clinical results. Results A total of 20 samples were included, of which 11 were infected based on aspiration or intra-operative cultures. The SMS had an area under the ROC curve (AUROC) of 0.87 for separating infectious from non-infectious conditions. For comparison, the AUROCs for ESR = 0.58, CRP = 0.6, and WBC = 0.59. At 100% sensitivity for infection, the specificity of the SMS was 40%, meaning nearly half of non-septic patients could have been ruled out for further intervention. Conclusion In this pilot study, SMS showed a high level of diagnostic accuracy in predicting septic joints compared to other diagnostic biomarkers. This quick blood test could be an important tool for early, accurate identification of acute septic joints and need for emergent surgery, improving clinical care and healthcare spending.

Morbidly obese patients undergoing total knee arthroplasty have worse functional outcomes and implant survival, and increased revision rates compared with nonobese patients. In addition to increased medical comorbidities and difficult exposure, increased stress on the tibial implant and altered kinematics of knee motion contribute to aseptic loosening and medial collapse. Increased implant fixation, including use of a stemmed tibial implant, may be a way to help avoid these complications. While there is limited data on tibial stems in the morbidly obese patients specifically, cemented stemmed tibial implants should be strongly considered in these patients, especially if bone quality is poor. The initial increased cost of a stemmed implant can be justified in this high-risk patient population to minimize the risk of costly revisions related to compromised tibia component fixation.

Objectives To assess the current portfolio of quality measures and candidate quality measures that address orthopaedic trauma surgery. Data sources We systematically reviewed the National Quality Forum, the Agency for Healthcare Research and Quality, and the Quality Payment Program for quality measures relevant to fracture surgery. We also searched MEDLINE/PubMed, Embase/Scopus, and Cochrane libraries. Data extraction Clinical practice guidelines were included as candidate quality measures if their development was in accordance with the Institute of Medicine criteria for development of clinical practice guidelines, were based on consistent clinical evidence including at least one Level I study, and carried the strongest possible recommendation by the developing body. We categorized the measures as structure, process, or outcome domains according to the framework described by Donabedian. Data synthesis From the 3809 articles initially identified and screened, a total of 189 combined quality or candidate quality measures were extracted from our review. With regard to the Donabedian framework, there were a total of 7% (13/189) structure, 52% process (99/189), and 41% (77/189) outcome measures identified. Conclusions As quality measures progressively inform reimbursement in value-based health care models, quality measures evaluating the care of patients sustaining a fracture will become increasingly relevant to orthopaedic trauma surgeons.

CASE Anatomic reduction of acetabular fractures with femoral head protrusion requires lateralization of the medialized femoral head to facilitate reduction and definitive fixation. In this case of a 71-year-old man with an associated both column acetabular fracture with femoral head medialization after a fall from a 10 foot ladder, we present the successful use of a novel reduction technique involving a modified arthroscopic limb positioner to provide adjustable distraction and counteract the deforming force in this injury pattern. CONCLUSION A limb positioner can provide appropriate on-table traction in pelvis and acetabular surgery to neutralize deforming forces and facilitate reduction and fixation.

Objective To determine the accuracy of International Classification of Disease Version 10 (ICD-10) coding for ankle fracture injury patterns. Design Retrospective cohort study Patients 97 adult patients with fractures about the ankle (rotational ankle fracture or distal tibia fracture) from 2016 to 2020, selected by stratified random sampling. Intervention Assignment of an ICD-10 code representative of a rotational ankle fracture, pilon fracture, or unspecified fracture of the lower leg. Outcome measurements Injury radiographs were reviewed by three authors to determine the correct code. Agreement between the correct code and the electronic medical record (EMR) assigned code was determined using kappa's statistic in the aggregate as well as percent agreement, sensitivity, specificity, and positive predictive value (PPV) between individual codes. Results 59 of 97 cases (60.8%) demonstrated discordance between the existing EMR and surgeon-assigned codes. Aggregate agreement between all codes was fair (K = 0.26). Lateral malleolus fracture codes demonstrated the highest PPV (0.91, 95% CI 0.72–0.99), while the lowest PPV was found for “other fractures of the lower leg” (0.05, 95% CI 0.0–0.24) and “other fracture of the fibula” (0.0, 95% CI 0.0–0.15). Generalized “other fracture” codes comprised 45% of EMR codes compared to only 6% of assigned codes (p Conclusion There is substantial discordance between existing EMR and surgeon-assigned ICD-10 codes for ankle fractures. Database research that relies on ICD-10 coding as a surrogate for primary clinical data should be interpreted with caution and institutions should make efforts to increase the accuracy of their coding.

Background: Supination-adduction (SAD) type II ankle fractures can have medial tibial plafond and talar body impaction. Factors associated with the development of posttraumatic arthritis can be intrinsic to the injury pattern or mitigated by the surgeon. We hypothesize that plafond malreducton and talar body impaction is associated with early posttraumatic arthrosis. Methods: A retrospective cohort of skeletally mature patients with SAD ankle fractures at 2 level 1 academic trauma centers who underwent operative fixation were identified. Patients with a minimum of 1-year follow-up were included. The presence of articular impaction identified on CT scan was recorded and the quality of reduction on final intraoperative radiographs was assessed. The primary outcome was radiographic ankle arthrosis (Kellgren-Lawrence 3 or 4), and postoperative complications were documented. Results: A total of 175 SAD ankle fractures were identified during a 10-year period; 79 patients with 1-year follow-up met inclusion criteria. The majority of injuries resulted from a high-energy mechanism. Articular impaction was present in 73% of injuries, and 23% of all patients had radiographic arthrosis (Kellgren-Lawrence 3 or 4) at final follow-up. Articular malreduction, defined by either a gap or step >2 mm, was significantly associated with development of arthrosis. Early treatment failure, infection, and nonunion was rare in this series. Conclusion: Malreduction of articular impaction in SAD ankle fractures is associated with early posttraumatic arthrosis. Recognition and anatomic restoration with stable fixation of articular impaction appears to mitigate risk of posttraumatic arthrosis. Investigations correlating postoperative and long-term radiographic findings to patient-reported outcomes after operative treatment of SAD ankle fractures are warranted. Level of Evidence: Level IV, retrospective case series.

OBJECTIVE To compare complications and functional outcomes of treatment with primary distal femoral replacement (DFR) versus open reduction and internal fixation (ORIF). DATA SOURCES PubMed, Embase, and Cochrane databases were searched for English language studies up to May 19, 2020, identifying 913 studies. STUDY SELECTION Studies that assessed complications of periprosthetic distal femur fractures with primary DFR or ORIF were included. Studies with sample size ≤5, mean age

Introduction: Bridge plating of distal femur fractures with lateral locking plates is susceptible to varus collapse, fixation failure, and nonunion. While medial and lateral dual plating has been described in clinical series, the biomechanical effects of dual plating of distal femur fractures have yet to be clearly defined. The purpose of this study was to compare dual plating to lateral locked bridge plating alone in a cadaveric distal femur gap osteotomy model. Materials and Methods: Gap osteotomies were created in eight matched pairs of cadaveric female distal femurs (average age: 64 yrs (standard deviation ± 4.4 yrs); age range: 57–68 yrs;) to simulate comminuted extraarticular distal femur fractures (AO/OTA 33A). Eight femurs underwent fixation with lateral locked plates alone and were matched with eight femurs treated with dual plating: lateral locked plates with supplemental medial small fragment non-locking fixation. Mechanical testing was performed on an ElectroPuls E10000 materials testing system using a 10 kN/100 Nm biaxial load cell. Specimens were subject to 25,000 cycles of cyclic loading from 100-1000 N at 2 Hz. Results: Two (2/8) specimens in the lateral only group failed catastrophically prior to completion of testing. All dual plated specimens survived the testing regimen. Dual plated specimens demonstrated significantly less coronal plane displacement (median 0.2 degrees, interquartile range [IQR], 0.0–0.5 degrees) compared to 2.0 degrees (IQR 1.9-3.3, p = 0.02) in the lateral plate only group. Dual plated specimens demonstrated greater bending stiffness compared to the lateral plated group (median 29.0 kN/degree, IQR 1.5–68.2 kN/degree vs median 0.50 kN/degree, IQR 0.23–2.28 kN/degree, p = 0.03). Conclusion: Contemporary fixation methods with a distal femur fractures are susceptible to mechanical failure and nonunion with lateral plates alone. Dual plate fixation in a cadaveric model of distal femur fractures underwent significantly less displacement under simulated weight bearing conditions and demonstrated greater stiffness than lateral plating alone. Given the significant clinical failure rates of lateral bridge plating in distal femur fractures, supplemental fixation should be considered, and dual plating of distal femurs augments mechanical stability in a clinically relevant magnitude.

CASE We describe an irreducible anterolateral tibiotalar dislocation with an AO/OTA (Arbeitsgemeinschaft fur Osteosynthesefragen/Orthopaedic Trauma Association) B-type pilon fracture. The injury was initially treated with closed reduction, using a medializing force achieved with an external fixator to unhinge the talar body from the fibula, followed by temporary stabilization. Definitive fixation was performed once the soft tissues had recovered. CONCLUSION This unique irreducible pilon fracture dislocation pattern is important to recognize to prevent iatrogenic complications associated with multiple failed closed reduction attempts. Frame-assisted, percutaneous, or open maneuvers may be required to facilitate a reduction. Staged treatment with temporization in an external fixator may be required.

SUMMARY Pilon fractures are complex injuries to the tibial plafond requiring stable fixation in the setting of effective soft tissue management, particularly in high-energy injuries, open fractures, or in geriatric individuals. Medial column support of the distal tibial metaphysis is often an essential component when applying balanced fixation. However, the biologic implications of multiple surgical approaches in the setting of damaged tissue, devitalized bone, or significant bone loss may contribute to increased complications. Percutaneous intramedullary large fragment screws offer both stability and a soft tissue-friendly approach for stabilizing the medial column. Here, we present our technique and indications for medial column support in pilon fractures using percutaneous large fragment fixation, along with our early clinical experience in a case series of 7 patients. At minimum 6-month follow-up, all patients healed their injuries with maintained alignment and without complications or further reoperation. Medial column support with percutaneous large fragment fixation in pilon fractures is a viable option to provide mechanical stability while effectively managing tenuous soft tissue envelopes.

Achieving durable mechanical stability in geriatric intertrochanteric proximal femur fractures remains a challenge. Concomitant poor bone quality, unstable fracture patterns, and suboptimal reduction are additional risk factors for early mechanical failure. Cement augmentation of the proximal locking screw or blade is one proposed method to augment implant anchorage. The purpose of this review is to describe the biomechanical and clinical evidence for cement augmentation of geriatric intertrochanteric fractures, and to elaborate indications for cement augmentation.The PubMed database was searched for English language studies up to January 2021. Studies that assessed effect of calcium phosphate or methylmethacrylate cement augmentation during open reduction and internal fixation of intertrochanteric fractures were included. Studies with sample size 5, nontraumatic or periprosthetic fractures, and nonunion or revision surgery were excluded. Study selection adhered to PRISMA criteria.801 studies were identified, of which 40 met study criteria. 9 studies assessed effect of cement augmentation on fracture displacement. All but one found that cement decreased fracture displacement. 10 studies assessed effect of cement augmentation on total load or cycles to failure. All but one demonstrated that augmented implants increased this variable. Complication rates of cement augmentation during ORIF of intertrochanteric fractures ranged from 0 to 47%, while non-augmented implants ranged from 0 to 51%. Reoperation rates ranged from 0 to 11% in the cement-augmented group and 0 to 11% in the non-augmented group. Fixation failure ranged from 0 to 11% in the cement-augmented group and 0 to 20% in the non-augmented group. Nonunion ranged from 0 to 3.6% in the cement-augmented group and 0 to 34% in the non-augmented group.Calcium phosphate or PMMA-augmented CMN fixation of IT fractures increased construct stability and improved outcomes in biomechanical and early clinical studies. The findings of these studies suggest an important role for cement augmentation in patient populations at high risk of mechanical failure.

INTRODUCTION Olecranon fractures are common in the elderly. Articular impaction is encountered occasionally, but the incidence and outcomes after treatment of this injury pattern have not been well characterized. METHODS We evaluated a cohort of geriatric olecranon fractures to determine the incidence of articular impaction and describe a technique for open reduction and internal fixation. RESULTS Of the 63 patients in our series, 31 had associated intraarticular impaction (49.2%). Patients with articular impaction did not have significantly different rates of postoperative complications (11/31, 35.5% versus 10/31, 32.3%; P = 1.00) or revision surgery (10/31, 32.3% versus 8/31, 25.8%; P = 0.780) compared with those without articular impaction. CONCLUSION Articular impaction is a common feature of geriatric olecranon fractures. Surgeons must maintain a high index of suspicion and have a surgical plan in place for managing this component of the injury.

Excessive fracture site collapse and shortening in intertrochanteric femur fractures alter hip biomechanics and patient outcomes. The purpose of the study was to compare extent of collapse in cephalomedullary nails with blades or lag screws. We hypothesized that there would be no difference in collapse between helical blades and lag screws.Retrospective cohort study.Single U.S. Level I Trauma Center.171 consecutive patients treated with cephalomedullary nails with either lag screw or blade for AO/OTA 31A1-3 proximal femur fractures and minimum 3-month follow-up.Lag screw or helical blade in a cephalomedullary nail.The primary outcome was fracture site collapse at 3 months.There was a significantly higher proportion of reverse-oblique and transverse intertrochanteric femur fractures (31-A3) in the lag screw group (15/42 vs 25/129). A3 patterns were associated with more collapse. There was significantly less collapse in the blade group (median 4.7 mm, inter-quartile range 2.5-7.8 mm) than the screw group (median 8.4 mmm, inter-quartile range 3.7-11.2 mm, p 0.006). Median collapse was no different between blades and screws when comparing stable and unstable patterns. However, blades were independently associated with 2.5 mm less collapse (95%CI - 4.2, - 0.72 mm, p 0.006) and lower likelihood of excessive collapse ( 10 mm at 3 months, OR 0.3, 95% CI 0.13-0.74, p 0.007), regardless of fracture pattern.Helical blades are independently associated with significantly less collapse than lag screws in intertrochanteric proximal femur fractures, after adjusting for unstable fracture patterns. In fracture patterns at risk for collapse, surgeons can consider use of a helical blade due to its favorable sliding properties compared to screws.

Delayed union or nonunion are relatively rare complications after fracture surgery, but when they do occur, they can result in substantial morbidity for the patient. In many cases, the etiology of impaired fracture healing is uncertain and attempts to determine the molecular basis for delayed union and nonunion formation have been limited. Prospectively isolating skeletal stem cells (SSCs) from fracture tissue samples at the time of surgical intervention represent a feasible methodology to determine a patient's biologic risk for compromised fracture healing. This report details a case in which functional in vitro readouts of SSCs derived from human fracture tissue at time of injury predicted a poor fracture healing outcome. This case suggests that it may be feasible to stratify a patient's fracture healing capacity and predict compromised fracture healing by prospectively isolating and analyzing SSCs during the index fracture surgery. © 2020 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

The lag screw or helical blade of a cephalomedullary nail facilitates controlled collapse of intertrochanteric proximal femur fractures. However, excessive collapse results in decreased hip offset and symptomatic lateral implants. Countersinking the screw or helical blade past the lateral cortex may minimize subsequent prominence, but some surgeons are concerned that this will prevent collapse and result in failure through cutout. We hypothesized that patients with countersunk lag screws or helical blades do not experience higher rates of screw or blade cutout and have less implant prominence after fracture healing.A retrospective review of 175 consecutive patients treated with cephalomedullary nails for AO/OTA 31A1-3 proximal femur fractures and a minimum 3-month follow-up and 254 patients with a 6-week follow-up at a single US level I trauma center. Patients were stratified based on countersunk versus noncountersunk lag screw or helical blade in a cephalomedullary nail. The primary outcome was the cutout rate at minimum 3 months, and the secondary outcome was radiographic collapse at minimum 6 weeks.Cutout rates were no different in patients with countersunk and noncountersunk screws and blades, and countersinking was associated with less collapse and less implant prominence at 6 weeks.Surgeons can countersink the lag screw or blade when treating intertrochanteric proximal femur fractures with a cephalomedullary nail without increasing failure rates and with the potential benefits of less prominent lateral implants and decreased collapse.

Cephalomedullary nails are a commonly used implant for the treatment of many pertrochanteric femur fractures and are available in short and long configurations. There is no consensus on ideal nail length. Relative advantages can be ascribed to short and long intramedullary nails, yet both implant styles share the potentially devastating complication of peri-implant fracture. Determining the clinical sequelae after fractures below nails of different lengths would provide valuable information for surgeons choosing between short or long nails. Thus, the purpose of the study was to compare injury patterns and treatment outcomes following peri-implant fractures below short or long cephalomedullary nails.This was a multicenter retrospective cohort study that identified 33 patients referred for treatment of peri-implant fractures below short and long cephalomedullary nails (n = 19 short, n = 14 long). We compared fracture pattern, treatment strategy, complications, and outcomes between these two groups.Short nails were associated with more diaphyseal fractures (odds ratio [OR] 13.75, CI 2.2-57.9, p 0.002), which were treated more commonly with revision intramedullary nailing (OR, infinity; p 0.01), while long nails were associated with distal metaphyseal fractures (OR 13.75, CI 2.2-57.9, p 0.002), which were treated with plate and screw fixation (p 0.002). After peri-implant fracture, there were no differences in blood loss, operative time, weight bearing status, or complication rates based on the length of the initial nail. In patients treated with revision nailing, there was greater estimated blood loss (EBL, median 300 cc, interquartile range [IQR] 250-1200 vs median 200 cc, IQR 100-300, p 0.03), blood product utilization and complication rates (OR 11.1, CI 1.1-135.7, p 0.03), but a trend toward unrestricted post-operative weight-bearing compared to patients treated with plate and screw constructs.Understanding fracture patterns and patient outcomes after fractures below nails of different lengths will help surgeons make more informed implant choices when treating intertrochanteric hip fractures. Revision to a long nail for the treatment of fractures at the tip of a short nail may be associated with increased patient morbidity.

OBJECTIVES To determine the incidence of iatrogenic peroneal nerve palsy after application of an intraoperative lateral distractor during open reduction and internal fixation of tibial plateau fractures. DESIGN Retrospective review. SETTING Single academic Level I trauma center. PATIENTS One hundred forty-seven patients met criteria and were included in the study. INTERVENTION Patients with unicondylar and bicondylar tibial plateau fractures underwent open reduction and internal fixation and received application of an intraoperative lateral distractor to aid in visualization and reduction of the impacted lateral plateau. MAIN OUTCOME MEASUREMENTS Incidence of iatrogenic peroneal nerve palsy. RESULTS There was a 2.0% incidence of iatrogenic peroneal nerve symptoms (3 of 147 patients), most of which were incomplete sensory deficits. There was no association with staged external fixation, regional anesthesia, or tourniquet use. CONCLUSION Use of an intraoperative lateral distractor is safe and has a low incidence of iatrogenic peroneal nerve palsy if applied carefully. LEVEL OF EVIDENCE Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

The optimal management of valgus-impacted femoral neck fractures remains controversial. Internal fixation is associated with significant rates of re-operation, while historical non-operative management strategies consisting of prolonged bed rest also resulted in patient morbidity. Our hypothesis was that screw fixation would have comparable failure rates to non-operative treatment and immediate mobilization for valgus-impacted femoral neck fractures.Retrospective cohort at a single academic Level I trauma center of patients with valgus-impacted femoral neck fractures (AO/OTA 31-B1) treated with percutaneous screw fixation (n = 97) or non-operatively (n = 28). Operative treatment consisted of percutaneous screw fixation. Non-operative treatment consisted of early mobilization. The primary outcome was a salvage operation. Patient demographics were assessed between groups.More non-operatively treated patients were permitted unrestricted weight-bearing (WBAT; p = 0.002). There was no increase in complication rates or mortality, and return to previous ambulatory status was comparable between operatively and non-operatively treated patients. 35.7% (10/28) of non-operatively treated patients underwent a subsequent operation, compared to 15.5% (15/97) of patients with screw fixation (p = 0.03). Only WBAT was independently associated with treatment failure (OR 3.1, 95%CI 1.2-8.3, p =0.02). WBAT was predictive of treatment failure only in the non-operatively treated group (64.3%, 9/14 WBAT vs 8.3%, 1/12 partial, p =0.005).After controlling for weight-bearing restrictions, we found no difference in failure rates between non-operative treatment and screw fixation. Non-operative treatment with partial weight-bearing had low failure rates, comparable complication and mortality rates, and equivalent functional outcomes to operative treatment and is reasonable if a patient would like to avoid surgery and accepts the risk of subsequent arthroplasty. Overall, there were relatively high failure rates in all groups.

Intra-articular screw cut-out is a potential complication of intertrochanteric femur fracture fixation with a cephalomedullary nail. Cement augmentation of fixation in the proximal segment offers the prospect of increased stability and fewer complications, but clinical experience with non-resorbable cement is limited. To determine the handling properties and efficacy of this new technique, we performed a retrospective propensity-matched cohort of forty-four geriatric intertrochanteric femur fractures treated with a cephalomedullary nail with (n = 11) or without (n = 33) augmentation with non-resorbable cement injected into the proximal segment. In the patients treated with cement augmentation, at minimum 3-month follow-up, there were no instances of intra-articular cut-out, and no increase in re-operation compared to conventional fixation. Cement augmentation appears to be safe and effective in geriatric intertrochanteric femur fractures to mitigate risk of cut-out.