Search

IEEE 802.11ax is the standard for the new generation WiFi networks. In this paper, we formulate the problem of joint access point (AP) placement and power-channel-resource unit assignment for 802.11ax-based dense WiFi. The objective is to minimize the number of APs. Two quality-of-service (QoS) requirements are to be fulfilled: (1) a two-tier throughput requirement which ensures that the throughput of each station is good enough, and (2) a fault tolerance requirement which ensures that the stations could still use WiFi even when some APs fail. We prove that this problem is NP-hard. To tackle this problem, we first develop an analytic model to derive the throughput of each station under the OFDMA mechanism and a widely used interference model. We then design a heuristic algorithm to find high-quality solutions with polynomial time complexity. Simulation results under both fixed-user and mobile-user cases show that: (1) when the area is small (50 x 50 m2), our algorithm gives the optimal solutions; when the area is larger (80 x 60 m2), our algorithm can reduce the number of APs by 34.9-87.7% as compared to the Random and Greedy algorithms. (2) Our algorithm can always get feasible solutions that fulfill the QoS requirements.

Individual differences in the timing of developmental processes are often of interest in longitudinal studies, yet common statistical approaches to modeling change cannot directly estimate the timing of when change occurs. The time-to-criterion framework was recently developed to incorporate the timing of a prespecified criterion value; however, this framework has difficulty accommodating contexts where the criterion value differs across people or when the criterion value is not known a priori, such as when the interest is in individual differences in when change starts or stops. This article combines aspects of reparameterized quadratic models and multiphase models to provide information on the timing of change. We first consider the more common situation of modeling decelerating change to an offset point, defined as the point in time at which change ceases. For increasing trajectories, the offset occurs when the criterion attains its maximum ("inverted J-shaped" trajectories). For decreasing trajectories, offset instead occurs at the minimum. Our model allows for individual differences in both the timing of offset and ultimate level of the outcome. The same model, reparameterized slightly, captures accelerating change from a point of onset ("J-shaped" trajectories). We then extend the framework to accommodate "S-shaped" curves where both the onset and offset of change are within the observation window. We provide demonstrations that span neuroscience, educational psychology, developmental psychology, and cognitive science, illustrating the applicability of the modeling framework to a variety of research questions about individual differences in the timing of change. (PsycInfo Database Record (c) 2021 APA, all rights reserved).

A latent variable modeling-based procedure is discussed that permits to readily point and interval estimate the design effect index in multilevel settings using widely circulated software. The method provides useful information about the relationship of important parameter standard errors when accounting for clustering effects relative to conducting single-level analyses. The approach can also be employed as an addendum to point and interval estimation of the intraclass correlation coefficient in empirical research. The discussed procedure makes it easily possible to evaluate the design effect in two-level studies by utilizing the popular latent variable modeling methodology and is illustrated with an example.

Projection techniques are often used to visualize high-dimensional data, allowing users to better understand the overall structure of multi-dimensional spaces on a 2D screen. Although many such methods exist, comparably little work has been done on generalizable methods of inverse-projection -- the process of mapping the projected points, or more generally, the projection space back to the original high-dimensional space. In this paper we present NNInv, a deep learning technique with the ability to approximate the inverse of any projection or mapping. NNInv learns to reconstruct high-dimensional data from any arbitrary point on a 2D projection space, giving users the ability to interact with the learned high-dimensional representation in a visual analytics system. We provide an analysis of the parameter space of NNInv, and offer guidance in selecting these parameters. We extend validation of the effectiveness of NNInv through a series of quantitative and qualitative analyses. We then demonstrate the method's utility by applying it to three visualization tasks: interactive instance interpolation, classifier agreement, and gradient visualization.

Identifying geometric features from sampled surfaces is a significant and fundamental task. The existing curvature-based methods that can identify ridge and valley features are generally sensitive to noise. Without requiring high-order differential operators, most statistics-based methods sacrifice certain extents of the feature descriptive powers in exchange for robustness. However, neither of these types of methods can treat the surface boundary features simultaneously. In this paper, we propose a novel neighbor reweighted local centroid (NRLC) computational algorithm to identify geometric features for point cloud models. It constructs a feature descriptor for the considered point via decomposing each of its neighboring vectors into two orthogonal directions. A neighboring vector starts from the considered point and ends with the corresponding neighbor. The decomposed neighboring vectors are then accumulated with different weights to generate the NRLC. With the defined NRLC, we design a probability set for each candidate feature point so that the convex, concave and surface boundary points can be recognized concurrently. In addition, we introduce a pair of feature operators, including assimilation and dissimilation, to further strengthen the identified geometric features. Finally, we test NRLC on a large body of point cloud models derived from different data sources. Several groups of the comparison experiments are conducted, and the results verify the validity and efficiency of our NRLC method.

Gesture Recognition which is an inevitable part of human computer interaction is an ever evolving active research area. This has been in use under varied applications like smart home systems, sign language recognition, augment reality and in device controls. The acquisition of hand gestures are usually through optical sensors, in this work a radar based hand gesture data set is used for classifying the gestures. Micro doppler signatures were used as the input to the model. Radar dataset has fewer data samples compared to optical based data sets. The proposed work uses separable convolutional neural networks model which does depth wise convolution followed by point wise convolution to reduce overfitting effect of the training data. The proposed model was built in such a way that the model is capable of classifying any unseen data without exactly mimicking the training samples. The proposed model has achieved 94.56% as the testing accuracy which is certainly better than the previous work on this Dop Net data set. Moreover the model has also minimized the computational hours of the model using separable convolutions.

Measuring displacements in model tests typically involves contact-based sensors such as linear potentiometers, where contact between two moving parts occurs at the sensing point. The sensor's finite mass, the limited stiffness of the beams and the clamping mechanism, and the slippage and hinging of the sensor body could affect the object's response and lead to measurement errors. Also, the physical mounting rack required to hold these sensors often obstructs the view and makes significant areas unavailable for conducting some other essential investigations. The advancement in high-speed, high-resolution and reasonably priced rugged cameras makes it feasible to obtain better displacement measurements by image analysis. This paper introduces a non-contact method that works by video recording the projection of laser lines on a test object to measure static and dynamic vertical displacements. The technique produces a continuous settlement distribution along the laser line passing through multiple objects of interest. This paper presents the theory for converting laser line images to displacements. The new method's validity is demonstrated by comparing the results from other measurement techniques: hand measurements, linear potentiometers and three-dimensional stereophotogrammetry.

The regression equations developed for projecting the effective factors of high-grade RC beams with hybrid confinement are presented in this study (cellular stirrups and externally bonded GFRP wraps). Six 150 × 250 × 3000 mm RC beams were constructed and tested to see how hybrid confinement affected the strength, deformability, and ductility of high-grade RC beams. To identify the final failure point, the beams were put through a four-point flexure test. Load application has been made easier thanks to a jack and pump setup, and deflections have been measured with 0.01 mm dial gauges. The suggested regression equations accurately predicted the effective components to a respectable degree.

We establish conditions under which forecasting performance can be improved by rotating between a set of underlying forecasts whose predictive accuracy is tracked using a set of time-varying monitoring instruments. We characterize the properties that the monitoring instruments must possess to be useful for identifying, at each point in time, the best forecast and show that these reflect both the accuracy of the predictors used by the underlying forecasting models and the strength of the monitoring instruments. Finite-sample bounds on forecasting performance that account for estimation error are used to compute the expected loss of the competing forecasts as well as for the dynamic rotation strategy. Finally, using Monte Carlo simulations and empirical applications to forecasting inflation and stock returns, we demonstrate the potential gains from using conditioning information to rotate between forecasts.

The grid-based approach is popular for point-in-polygon tests. However, there is a trade-off between the preprocessing and the inclusion test, which always requires the grid resolutions to be tuned. In this article, we address this challenge by enhancing the grid structure using y-axis-aligned stripes, which are formed by the y-axis-aligned lines passing through the endpoints of the edge segments in the cell, thereby managing the edge segments in each grid cell. Moreover, we precompute the inclusion properties of the x-axis-aligned top borders of the stripes during preprocessing. Therefore, to answer a query point with the ray crossing method, we can emit a ray from the point to propagate upwards until the ray arrives at the top border of a stripe. We thoroughly consider singular cases to guarantee each query point can be answered in the stripe that contains the point. In our method, the computational load can be decreased, as one coordinate of the intersection point between the ray and an edge is known in advance, and parallel computing can be well exploited because the branching operations for determining whether an edge intersects with the ray are saved. Experimental results show that the efficiency of our method does not vary much with respect to the grid resolutions, so the trouble of tuning grid resolutions can be avoided. Ultimately, our method with a low grid resolution can reduce the preprocessing time and still achieve a higher inclusion test efficiency than the existing methods with a high grid resolution, especially on GPUs.

What does it mean today to study a problem from a computational point of view? We focus on parameterized complexity and on Column 16 “Graph Restrictions and Their Effect” of D.S. Johnson’s Ongoing guide, where several puzzles were proposed in a summary table with 30 graph classes as rows and 11 problems as columns. Several of the 330 entries remain unclassified into Polynomial or NP -complete after 35 years. We provide a full dichotomy for the Steiner Tree column by proving that the problem is NP -complete when restricted to Undirected Path graphs. We revise Johnson’s summary table according to the granularity provided by the parameterized complexity for NP -complete problems.

Ships are usually disturbed by waves when they are traveling at sea. When the waves are large, it is not conducive to driving safety, comfort and economy. Therefore, this paper proposed a new type of automatic driving scheme, which links the wave height prediction with ship driving. By studying the accurate prediction of wave height, ships can adjust their course in real time to ensure that they always travel in the area with the lowest wave height. According to the different driving conditions of ships in the open sea and the offshore sea, we designed two wave height prediction models based on LSTM, which are suitable for the above two types of sea areas. In particular, when we created the open sea model, we selected the data of the location points other than the predicted point as the training data. After comparative testing, the two types of models have reached satisfactory accuracy, which provided support for the ship automatic driving scheme proposed in this paper.

Three-dimensional (3D) microdisplacement monitoring plays a crucial role in the assembly of large aircraft. This paper presents a broadly applicable high-precision online 3D microdisplacement monitoring method and system based on proximity sensors as well as a corresponding in situ calibration method, which can be applied under various extreme working conditions encountered in the aircraft assembly process, such as compact and obstructed spaces. A 3D monitoring model is first established to achieve 3D microdisplacement monitoring based only on the one-dimensional distances measured by proximity sensors, which concerns the extrinsic sensor parameters, such as the probe base point (PBP) and the unit displacement vector (UDV). Then, a calibration method is employed to obtain these extrinsic parameters with high precision by combining spatial transformation principles and weighted optimization. Finally, calibration and monitoring experiments performed for a tailplane assembly process are reported. The calibration precision for the PBP is better than ±10 μm in the X and Y directions and ±2 μm in the Z direction, and the calibration precision for the UDV is better than 0.07°. Moreover, the accuracy of the 3D microdisplacement monitoring system can reach ±15 μm. In general, this paper provides new insights into the modeling and calibration of 3D microdisplacement monitoring based on proximity sensors and a precise, efficient, and low-cost technical means for performing related measurements in compact spaces during the aircraft assembly process.

Knee points, characterized as a small improvement on one objective can lead to a significant degradation on at least one of the other objectives, are attractive to decision makers in multi-criterion decision-making. This paper presents a simple and effective knee point identification method to help decision makers identify solution(s) of interest from a given set of trade-off solutions thus facilitating posterior decision-making. Our basic idea is to sequentially validate whether a solution is a knee point or not by comparing its localized trade-off utility with others within its neighborhood characterized from a decomposition perspective. In particular, a solution is a knee point if and only if it has the best localized trade-off utility among its neighbors. We implement a GPU version that carries out the knee point identification in a parallel manner. This GPU version reduces the worst-case complexity from quadratic to linear. The performance of our proposed method is compared with five state-of-the-art knee point identification methods on 134 test problem instances and two real-world engineering design problems. Empirical results demonstrate its outstanding performance especially on problems with many local knee points. We further validate the usefulness of our proposed method for guiding evolutionary multi-objective optimization algorithms to search for knee points on the fly during the evolutionary process.

With increasing of data size and development of multi-core computers, asynchronous parallel stochastic optimization algorithms such as KroMagnon have gained significant attention. In this paper, we propose a new Sparse approximation and asynchronous parallel Stochastic Variance Reduced Gradient (SSVRG) method for sparse and high-dimensional machine learning problems. Unlike standard SVRG and its asynchronous parallel variant, KroMagnon, the snapshot point of SSVRG is set to the average of all the iterates in the previous epoch, which allows it to take much larger learning rates and makes it more robust to the choice of learning rates. In particular, we use the sparse approximation of the popular SVRG estimator to perform completely sparse updates. Therefore, SSVRG has a much lower per-iteration computational cost than its dense counterpart, SVRG++, and is very friendly to asynchronous parallel implementation. Moreover, we provide the convergence guarantees of SSVRG for both SC and non-SC problems, while existing asynchronous algorithms (e.g., KroMagnon) only have convergence guarantees for SC problems. Finally, we extend SSVRG to non-smooth and asynchronous parallel settings. Numerical results demonstrate that SSVRG converges significantly faster than the state-of-the-art asynchronous parallel methods, e.g., KroMagnon, and is usually more than three orders of magnitude faster than SVRG++.

This paper presents an analytical model for calculating the Earth discontinuous coverage of satellite constellation with repeating ground tracks by integrating and extending the application of coverage region and route theory. Specifically, the visibility condition for a ground point is represented as a coverage region in the two-dimension map of visibility properties, and the trajectories of satellites with circular orbits and repeating ground tracks are converted to several inclined lines in the map. By analyzing the intersections of the lines and the edge of the coverage region, the coverage durations for the ground point can be calculated. Based on the point coverage, the variations of coverage characteristics along the parallel are analyzed, and the regional or global coverage characteristics of constellations can be obtained. Numerical examples show that the proposed method can accurately and rapidly calculate the coverage characteristics, e.g. revisit time and coverage time. The calculated results are extremely close to those of the Satellite Tool Kit (STK) and are also superior to the existing research results. The proposed analytical model can be a useful tool for constellation design and coverage performance analysis.

In this paper, we explore the mask representation in instance segmentation with Point-of-Interest (PoI) features. Differentiating multiple potential instances within a single PoI feature is challenging because learning a high-dimensional mask feature for each instance using vanilla convolution demands a heavy computing burden. To address this challenge, we propose an instance-aware convolution. It decomposes this mask representation learning task into two tractable modules as instance-aware weights and instance-agnostic features. The former is to parametrize convolution for producing mask features corresponding to different instances, improving mask learning efficiency by avoiding employing several independent convolutions. Meanwhile, the latter serves as mask templates in a single point. Together, instance-aware mask features are computed by convolving the template with dynamic weights, used for the mask prediction. Along with instance-aware convolution, we propose PointINS, a simple and practical instance segmentation approach, building upon dense one-stage detectors. Through extensive experiments, we evaluated the effectiveness of our framework built upon RetinaNet and FCOS. PointINS in ResNet101 backbone achieves a 38.3 mask mean average precision (mAP) on COCO dataset, outperforming existing point-based methods by a large margin. It gives a comparable performance to the region-based Mask R-CNN with faster inference., Comment: Accepted by IEEE Transactions on Pattern Analysis and Machine Intelligence

An effective path-following guidance algorithm for unmanned combat aerial vehicles by pursuing a look-ahead target-point along the desired path is devised. The concept of look-ahead pursuit for 3-D path-following was extended from the planar ${\mathcal {L}_1}$ guidance, which has been widely adopted in the application of lateral guidance of fixed-wing drone. Decoupled implementation of the planar guidance action on each of the longitudinal (vertical) and lateral (horizontal) planes supplies longitudinal-lateral acceleration commands in two perpendicular planes which is well accepted by aviation engineers. The computation of the look-ahead point utilizes a finite and iterative numerical search method by introducing an auxiliary path-related parameter. Furthermore, additional implementation-specific details such as the modification of adaptive ${\mathcal {L}_1}$ length and the protection strategies ensuring wide applicability of the algorithm indeed guarantee certain necessity to be considered in real implementation of the guidance law. The improved schemes eliminate complicated coordinate transformations and are built on the path-independent assumption, thus making them easier to be adjusted between various types of paths, including discrete optimal trajectories. Monte Carlo simulations and real-world flight tests have confirmed the effectiveness of the nonlinear guidance algorithm.

In medical image analysis (MIA) and computer-assisted surgery (CAS), aligning two multiple point sets (PSs) together is an essential but also a challenging problem. For example, rigidly aligning multiple point sets into one common coordinate frame is a prerequisite for statistical shape modelling (SSM). Accurately aligning the pre-operative space with the intra-operative space in CAS is very crucial to successful interventions. In this article, we formally formulate the multiple generalized point set registration problem (MGPSR) in a probabilistic manner, where both the positional and the normal vectors are used. The six-dimensional vectors consisting of both positional and normal vectors are called as generalized points. In the formulated model, all the generalized PSs to be registered are considered to be the realizations of underlying unknown hybrid mixture models (HMMs). By assuming the independence of the positional and orientational vectors (i.e., the normal vectors), the probability density function (PDF) of an observed generalized point is computed as the product of Gaussian and Fisher distributions. Furthermore, to consider the anisotropic noise in surgical navigation, the positional error is assumed to obey a multi-variate Gaussian distribution. Finally, registering PSs is formulated as a maximum likelihood (ML) problem, and solved under the expectation maximization (EM) technique. By using more enriched information (i.e., the normal vectors), our algorithm is more robust to outliers. By treating all PSs equally, our algorithm does not bias towards any PS. To validate the proposed approach, extensive experiments have been conducted on surface points extracted from CT images of (i) a human femur bone model; (ii) a human pelvis bone model. Results demonstrate our algorithm's high accuracy, robustness to noise and outliers.

Most supervised learning-based pose estimation methods for stacked scenes are trained on massive synthetic datasets. In most cases, the challenge is that the learned network on the training dataset is no longer optimal on the testing dataset. To address this problem, we propose a pose regression network PPR-Net++. It transforms each scene point into a point in the centroid space, followed by a clustering process and a voting process. In the training phase, a mapping function between the network's critical parameter (i.e., the bandwidth of the clustering algorithm) and the compactness of the centroid distributions is obtained. This function is used to adapt the bandwidth between centroid distributions of two different domains. In addition, to further improve the pose estimation accuracy, the network also predicts the confidence of each point, based on its visibility and pose error. Only the points with high confidence have the right to vote for the final object pose. In experiments, our method is trained on the IPA synthetic dataset and compared with the state-of-the-art algorithm. When tested with the public synthetic Sileane dataset, our method is better in all eight objects, where five of them are improved by more than 5% in average precision (AP). On IPA real dataset, our method outperforms a large margin by 20%. This lays a solid foundation for robot grasping in industrial scenarios.

In modern discrete flexible manufacturing systems, dynamic disturbances frequently occur in real time and each job may contain several special operations in partial-no-wait constraint due to technological requirements. In this regard, a hierarchical multiagent deep reinforcement learning (DRL)-based real-time scheduling method named hierarchical multi-agent proximal policy optimization (HMAPPO) is developed to address the dynamic partial-no-wait multiobjective flexible job shop scheduling problem (DMOFJSP-PNW) with new job insertions and machine breakdowns. The proposed HMAPPO contains three proximal policy optimization (PPO)-based agents operating in different spatiotemporal scales, namely, objective agent, job agent, and machine agent. The objective agent acts as a higher controller periodically determining the temporary objectives to be optimized. The job agent and machine agent are lower actuators, respectively, choosing a job selection rule and machine assignment rule to achieve the temporary objective at each rescheduling point. Five job selection rules and six machine assignment rules are designed to select an uncompleted job and assign the next operation of which together with its successors in no-wait constraint on the corresponding processing machines. A hierarchical PPO-based training algorithm is developed. Extensive numerical experiments have confirmed the effectiveness and superiority of the proposed HMAPPO compared with other well-known dynamic scheduling methods.

In this article, a novel method for simultaneous localization and mapping (SLAM) named surface elements (surfel) point SLAM (SP-SLAM) is proposed using an RGB-D camera. The key idea of SP-SLAM is to use not only keypoints but also surfels as features to cope with both high texture and low texture environments. By decomposing a surface into a small number of surfels, the method can represent spacious environments using a relatively small amount of memory. To optimize the poses of points, surfels, and cameras altogether, new objective functions are proposed, and a new bundle adjustment using these objective functions is developed. The proposed SP-SLAM runs in real time on a central processing unit as in other feature-based visual SLAM methods but works better than them not only in high texture but also in low texture environments, overcoming well-known drawbacks of feature-based visual SLAM with degradation in low texture environments. The proposed method is applied to benchmark datasets and its effectiveness is demonstrated by comparing against those of previous methods in terms of localization accuracy.

With the increasing penetration of wind power generation, the fluctuating and intermittent behavior of wind power poses huge challenges to the operation and planning of distribution networks. A popular way to mitigate these challenges is to provide a group of possible wind power forecasting scenarios instead of depending on deterministic point forecasting values, so that system operators can consider the uncertainties. This letter proposes a novel WindGMMN method for wind power scenario forecasting, in which necessary modifications are made on the generative moment matching network (GMMN), and an optimization strategy is designed to find a series of wind power scenarios with similar shapes, probability distributions, and temporal correlations as potential scenarios. Simulations and analyses were performed on a public dataset with 2190 wind power generation curves and their corresponding meteorological features. The results show that the proposed WindGMMN outperforms popular baselines (e.g., variational auto-encoders and generative adversarial networks) for scenario forecasting of wind power, without any restrictions on the time horizon (e.g., times ranging from 10 min to 24 h).

Snake robots have shown limited ability to perform manipulation tasks in comparison to their locomotion capabilities. In this article, we propose a mobile manipulation approach that increases the manipulation ability of snake robots by using their full-body motion. We consider a snake robot that moves along the outer surface of a pipe using the helical rolling gait. To perform a manipulation task, we extend the front links of the robot to form a manipulator-part, where the remaining links form a helical base that wraps around the pipe. In the proposed approach, the motion of the manipulator-part is combined with a rolling motion performed by the base-part. This results in enhanced rotational ability of the end-effector, without the need to install an additional rotary motor. The stability of the robot structure is also improved via the resulting tightening force between the helical base-part and the pipe. The kinematics of the proposed robot arrangement is represented considering a dynamically changing contact point between the links of the helical base and the pipe. To realize the proposed method, we introduce a two-level controller that enables the manipulator-part and the helical base to work simultaneously during manipulation. The experimental results showed the validity of the proposed method to track various trajectories and carry out manipulation tasks using a typical snake robot without extra actuators.

Sintering is the preproduction process of ironmaking, whose products are the basis of ironmaking. How to improve the operating performance of the iron ore sintering process has always been a problem that operators are committed to solve. An operating performance improvement method based on prediction and grade assessment is presented in this article. First, considering the data distribution characteristics of the process, a performance index prediction model based on the Gaussian process regression is built, in which the mutual information analysis method is used to select the inputs of the performance index prediction model. Then, the operating performance grade is assessed by a threshold division method. Next, the operating performance grade guides the control of the burn-through point to improve the operating performance. Finally, experimental verification is performed based on the actual running data. The results show that the proposed method has high prediction accuracy, and it is also significant in improving the operating performance. Therefore, this approach provides an effective solution to predict and improve operating performance.

We investigate the implementation of a sparsity promoting hands-off control scheme using the alternating direction method of multiplies (ADMM). In order to minimize the numerical control effort along with the actuation one, only a single ADMM iteration per time step is considered. We analyze the resulting closed-loop dynamics for linear systems with additive disturbances and show that the proposed scheme provides sparse controls as desired and, in addition, ensures input-to-state practical stability. We further point out a close relation between the proposed real-time scheme and (non-minimum time) dead-beat control. Finally, characteristics and effectiveness of the novel hands-off controller(s) are illustrated with numerical examples.

The SLAM problem in dynamic scenes is regarded as a challenge. This article proposes a novel SLAM framework for dynamic environments, which combines neural network and motion information of dynamic objects, making the system more adaptable to dynamic scenes. Specifically, we adopt a fast object detection network, tightly couple the results of the object detection with the geometric information in the SLAM system. Then the feature point extracted from the image is associated with a dynamic probability. By utilizing the feature points which tend to be static, the localization result can be greatly improved in dynamic environments. We perform the experiments both on the public data set and the real environment. The result can demonstrate that the proposed method greatly improves the localization accuracy in a dynamic environment. An open-source version of the source code is available.

To solve the problem of realizing autonomous aerial combat decision-making for unmanned combat aerial vehicles (UCAVs) rapidly and accurately in an uncertain environment, this paper proposes a decision-making method based on an improved deep reinforcement learning (DRL) algorithm: the multi-step double deep Q-network (MS-DDQN) algorithm. First, a six-degree-of-freedom UCAV model based on an aircraft control system is established on a simulation platform, and the situation assessment functions of the UCAV and its target are established by considering their angles, altitudes, environments, missile attack performances, and UCAV performance. By controlling the flight path angle, roll angle, and flight velocity, 27 common basic actions are designed. On this basis, aiming to overcome the defects of traditional DRL in terms of training speed and convergence speed, the improved MS-DDQN method is introduced to incorporate the final return value into the previous steps. Finally, the pre-training learning model is used as the starting point for the second learning model to simulate the UCAV aerial combat decision-making process based on the basic training method, which helps to shorten the training time and improve the learning efficiency. The improved DRL algorithm significantly accelerates the training speed and estimates the target value more accurately during training, and it can be applied to aerial combat decision-making.

K-means is one of ten popular clustering algorithms. However, k-means performs poorly due to the presence of outliers in real datasets. Besides, a different distance metric makes a variation in data clustering accuracy. Improve the clustering accuracy of k-means is still an active topic among researchers of the data clustering community from outliers removal and distance metrics perspectives. Herein, a novel modification of the k-means algorithm is proposed based on Tukey’s rule in conjunction with a new distance metric. The standard Tukey rule is modified to remove the outliers adaptively by considering whether the data is distributed to the left, right or even to the input data's mean value. The elimination of outliers is applied in the proposed modification of the k-means before calculating the centroids to minimize the outliers' influences. Meanwhile, a new distance metric is proposed to assign each data point to the nearest cluster. In this research, the modified k-means significantly improves the clustering accuracy and centroids convergence. Moreover, the proposed distance metric's overall performance outperforms most of the literature distance metrics. This manuscript's presented work demonstrates the significance of the proposed technique to improve the overall clustering accuracy up to 80.57% on nine standard multivariate datasets.

In recent years, the proximal policy optimization (PPO) algorithm has received considerable attention because of its excellent performance in many challenging tasks. However, there is still a large space for theoretical explanation of the mechanism of PPO's horizontal clipping operation, which is a key means to improve the performance of PPO. In addition, while PPO is inspired by the learning theory of trust region policy optimization (TRPO), the theoretical connection between PPO's clipping operation and TRPO's trust region constraint has not been well studied. In this article, we first analyze the effect of PPO's clipping operation on the objective function of conservative policy iteration, and strictly give the theoretical relationship between PPO and TRPO. Then, a novel first-order policy gradient algorithm called authentic boundary PPO (ABPPO) is proposed, which is based on the authentic boundary setting rule. To ensure the difference between the new and old policies is better kept within the clipping range, by borrowing the idea of ABPPO, we proposed two novel improved PPO algorithms called rollback mechanism-based ABPPO (RMABPPO) and penalized point policy difference-based ABPPO (P3DABPPO), which are based on the ideas of rollback clipping and penalized point policy difference, respectively. Experiments on the continuous robotic control tasks implemented in MuJoCo show that our proposed improved PPO algorithms can effectively improve the learning stability and accelerate the learning speed compared with the original PPO.

In this article, we introduce interval-valued Kuhn-Tucker (KT)-pseudoinvex optimization problems governed by interval-valued path-independent curvilinear integral objective functionals. Concretely, it is proven that an interval-valued KT-pseudoinvex variational control problem is described such that every KT point is an LU-optimal solution. In addition, the main results are highlighted by two illustrative applications describing the controlled behavior of an artificial neural system.

Bearing is one of the critical components in rotating equipment. Therefore, accurate estimation of the remaining useful life (RUL) of bearings plays a vital role in reducing the costly unplanned maintenance and increasing the reliability of machines. This paper proposes a method for bearing prognostics that uses iteratively updated degradation regression models to capture the degradation trend in bearing’s health indicator (HI), and the models are utilized to predict the degradation trajectory of HI and to estimate the RUL of bearings. The importance of determining the time to start prediction by elbow point is explained, which is often overlooked in prognostics. To improve the prognostic performance, an adaptive approach for elbow point detection is designed based on the gradient change of HIs, and a new smooth approach is applied to reduce spurious fluctuations in degradation trajectory. The effectiveness of the proposed method is validated on two publicly available data sets, i.e., IMS and FEMTO bearing prognostics data set, and its prognostic performance is compared with that of three state-of-the-art methods. The obtained results demonstrate that the proposed method can effectively detect elbow point and determine the time to start prediction, and can calibrate the degradation regression model dynamically according to the evolving degradation trend in the HI, which validates its superior prognostic performance.

Adaptive output-feedback consensus with funnel performance is studied for nonlinear uncertain multi-agent systems (MASs). The nonlinear MASs contain unknown dynamics and only an output variable can be measured. The other states are not measured directly and are reconstructed via fuzzy state observers. The presence of output feedback makes the proposed design significantly different from the existing literature on control with funnel performance. In particular, appropriate adaptive laws must be defined to handle the presence of uncertain dynamics and local output information from a few neighboring nodes. Interestingly, with a suitable error transformation, it is shown that the proposed control law has a simpler structure than barrier function methods proposed in the literature to handle funnel-like performance. With respect to this point, simulation studies illustrate that the proposed method can dramatically reduce the control effort while satisfying transient and steady-state performance imposed by the funnel.

In this article, a novel interval type-2 Takagi-Sugeno fuzzy c -regression modeling method with a modified distance definition is proposed. The modified distance definition is developed to describe the distance between each data point and the local type-2 fuzzy model. To improve the robustness of the proposed identification method, a modified objective function is presented. In addition, different from most previous studies that require numerous free parameters to be determined, an interval type-2 fuzzy c -regression model is developed to reduce the number of such free parameters. Furthermore, an improved ratio between the upper and lower weights is proposed based on the upper and lower membership function with each input data, and the ordinary least-squares method is adopted to establish the type-2 fuzzy model. The Box-Jenkins model and two numerical models are given to illustrate the effectiveness and robustness of the proposed results.

Finite control-set model predictive control (FCS-MPC) shows superior dynamic performance with simple structure for motor drives. However, conventional FCS-MPC method presents unfixed switching frequency, making it intractable for the design of heat sinks and output filters. To address this issue, this study is devoted to developing a new FCS-MPC strategy with constant switching frequency for permanent magnet synchronous motor (PMSM) drives fed by three-level T-type inverter. The switching frequency regulation is realized by extending the period control technique, where the periods are measured between each rising edge and falling edge of the gate signals. The proposed algorithm can be embedded in the iterative process of the FCS-MPC, which can easily achieve the fixed switching frequency with balanced neutral point potential. The performance of this control strategy is numerically evaluated and experimentally verified by an 11-kW PMSM drive platform.

In this paper, we provide a sparse image restoration algorithm with a SSIM-based objective function. The proposed technique is a modification to the SSIM-inspired OMP (iOMP) and, and it has two parallel sparse restoration paths. One of them is L 2 -sense OMP and the other is SSIM -sense OMP (iOMP). Both paths intersects only at the starting point and gives different quality levels after each iteration. This distinction enables us to select the coefficients of the best quality and to avoid the uncertainty issue of iOMP. From the point of view of the SSIM levels, the conducted experiments proved that, the proposed methodology works better than iOMP and OMP. Also, the performance of this method is checked for significance by the t-test, and the obtained results proved that the method works well especially for large images and the data-independent based dictionary.

Multi-dimensional range queries, especially over the cloud platform, have received considerable attention in recent years. However, as the cloud server is not fully trustable, designing multi-dimensional range queries over encrypted data becomes a research trend, and many solutions have been proposed in the literature. Nevertheless, most existing solutions suffer from the leakage of single-dimensional privacy. Although a few existing works have addressed the problem of single-dimensional privacy, they are impractical in some real scenarios due to the issues of inefficiency, inaccuracy, and two-cloud-server requirement. Aiming at solving these issues, in this paper, we propose a practical and privacy-preserving multi-dimensional range query (PRQ) scheme. Specifically, in our PRQ scheme, we first index the multi-dimensional database with an R-tree and reduce R-tree based range queries to the problem of point intersection and range intersection. Then, by employing the lightweight matrix encryption technique, we design two novel algorithms for PRQ, i.e., multi-dimensional point intersection predicate encryption (PIPE) and multi-dimensional range intersection predicate encryption (RIPE), which can preserve the privacy of the proposed point intersection algorithm and range intersection algorithm, and further preserve the single-dimensional privacy in the PRQ scheme. Security analysis and extensive simulations show that our PRQ scheme is privacy-preserving and efficient.

In molecular analysis, Spatial Distribution Functions (SDF) are fundamental instruments in answering questions related to spatial occurrences and relations of atomic structures over time. Given a molecular trajectory, SDFs can, for example, reveal the occurrence of water in relation to particular structures and hence provide clues of hydrophobic and hydrophilic regions. For the computation of meaningful distribution functions, the definition of molecular reference structures is essential. Therefore we introduce the concept of an internal frame of reference (IFR) for labeled point sets that represent selected molecular structures, and we propose an algorithm for tracking the IFR over time and space using a variant of Kabschs algorithm. This approach lets us generate a consistent space for the aggregation of the SDF for molecular trajectories and molecular ensembles. We demonstrate the usefulness of the technique by applying it to temporal molecular trajectories as well as ensemble datasets. The examples include different docking scenarios with DNA, insulin, and aspirin. Funding agencies:This work was supported through grants from the ExcellenceCenter at Link¨oping and Lund in Information Technology(ELLIIT) and the Swedish e-Science Research Centre(SeRC). The authors thanks the Swedish National Infrastructurefor Computing (SNIC) for providing computingresources.

A flow-shop production environment is a widely used production setting in the industry, especially preferred when the variety of products and processes is limited. The constant development of technology and the increasing competition in the market compel researchers to seek ways to increase efficiency. Therefore, scheduling remains an important area of study for researchers. When the size of the problem increases, particularly in real-life contexts, it becomes almost impossible to work out a feasible solution to scheduling problems through current computer technologies. In such cases, solutions are often developed using heuristic or meta-heuristic methods. However, the performance of these methods may vary according to the problem or the components of the suggested method of solution. This study aimed to investigate the effect of local search strategies on the solution performance of hybrid firefly and particle swarm optimization algorithm, developed using chaotic local search. We used four different solution methods: the triple local search strategy consisting of insertion, swap and inversion, which were used frequently in earlier studies, and the individual use of each of these three strategies. In this study, the average relative difference values calculated using insertion, swap, inversion and triple strategy were found to be 3.03, 1.27, 2.54 and 1.20, respectively. As a result of the analyses carried out to compare the results of the solutions obtained in the flow-shop scheduling problems of Taillard, it was found that better results were obtained using the triple strategy. These findings can be a point of reference for future research.

Two dimensional (2D) Photonic crystals (PhCs) based cross waveguide structure (CWs) consisting of resonant cavity is investigated in this paper. Investigations are done using Two Dimensional Finite Difference Time Domain (2DFDTD) method. Transmission characteristics have been obtained for different radii of central rod placed at crossing point of two waveguides and number of regular rods surrounding central rod. Nonlinear behavior is also studied for different operating wavelengths.

The topology of isosurfaces changes at isovalues of critical points, making such points an important feature when building contour trees or Morse-Smale complexes. Hexahedral elements with linear interpolants can contain additional off-vertex critical points in element bodies and on element faces. Moreover, a point on the face of a hexahedron which is critical in the element-local context is not necessarily critical in the global context. In ‘`Exploring Scalar Fields Using Critical Isovalues’' Weber et al. introduce a method to determine whether critical points on faces are also critical in the global context, based on the gradient of the asymptotic decider in each element that shares the face. However, as defined, the method of Weber et al. contains an error, and can lead to incorrect results. In this work we correct the error.

Accurate and fast 3D object detection from point clouds is a key task in autonomous driving. Existing one-stage 3D object detection methods can achieve real-time performance, however, they are dominated by anchor-based detectors which are inefficient and require additional post-processing. In this paper, we eliminate anchors and model an object as a single point--the center point of its bounding box. Based on the center point, we propose an anchor-free CenterNet3D network that performs 3D object detection without anchors. Our CenterNet3D uses keypoint estimation to find center points and directly regresses 3D bounding boxes. However, because inherent sparsity of point clouds, 3D object center points are likely to be in empty space which makes it difficult to estimate accurate boundaries. To solve this issue, we propose an extra corner attention module to enforce the CNN backbone to pay more attention to object boundaries. Besides, considering that one-stage detectors suffer from the discordance between the predicted bounding boxes and corresponding classification confidences, we develop an efficient keypoint-sensitive warping operation to align the confidences to the predicted bounding boxes. Our proposed CenterNet3D is non-maximum suppression free which makes it more efficient and simpler. We evaluate CenterNet3D on the widely used KITTI dataset and more challenging nuScenes dataset. Our method outperforms all state-of-the-art anchor-based one-stage methods and has comparable performance to two-stage methods as well. It has an inference speed of 20 FPS and achieves the best speed and accuracy trade-off. Our source code will be released at https://github.com/wangguojun2018/CenterNet3d., 13 pages, 5 figures

This paper revisits the analysis of the well-known infeed effect on transmission lines distance protection. A new adaptive algorithm to overcome this drawback is proposed, which requires solely impedance data and the operational status of power apparatus to perform overreaching distance zones settings. A comparison of the proposed strategy and the traditional one is performed. The obtained results demonstrate that the proposed settings ensure the correct operation of overreaching zones. Thereby, the backup coverage is improved significantly, besides avoiding distance zones overlapping between adjacent lines. It reveals the proposed strategy usefulness and value from the practical point of view, since it can be implemented with technology readily available on the market.

Summarization: This paper presents a Cumulative Unmanned Aerial Vehicle Routing Problem (CUAVRP) approach to optimize Humanitarian Coverage Path Planning (HCPP). Coverage path planning consists of finding the route which covers every point of a certain area of interest. This paper considers a Search & Rescue mission, using a homogeneous fleet of Unmanned Aerial Vehicles (UAVs). In this scenario, the objective is to minimize the sum of arrival times at all points of the area of interest, thus, completing the search with minimum latency. The HCPP problem is transformed into a Vehicle Routing Problem by using an approximate cellular decomposition technique to discretize the area into a grid, where the rectangles represent the UAV sensor’s field of view. The center points of the formed rectangles, become the nodes used for a UAV routing problem. This approach uses the objective of minimizing the sum of arrival times at customers, found in the Cumulative Capacitated Vehicle Routing Problem (CCVRP), adjusted for the Search & Rescue Coverage Path Planning using UAVs. The Min-max objective is also implemented and tested. Three versions of a Parallel Weighted Greedy Randomized Adaptive Search Procedure - Variable Neighborhood Decent (GRASP-VND) algorithm is implemented to solve the Cumulative UAV Routing Problem for Humanitarian Coverage Path Planning. Presented on: European Journal of Operational Research

Object detection is the most critical and foundational sensing module for the autonomous movement platform. However, most of the existing deep learning solutions are based on GPU servers, which limits their actual deployment. We present an efficient multi-sensor fusion based object detection model that can be deployed on the off-the-shelf edge computing device for the vehicle platform. To achieve real-time target detection, the model eliminates a large number of invalid point clouds through ground filtering algorithm, and then adds texture information (fused from camera image) through point cloud coloring to enhance features. The proposed PV-EncoNet efficiently encodes both the spatial and texture features of each colored point through point-wise and voxel-wise encoding, and then predicts the position, heading and class of the objects. The final model can achieve about 17.92 and 24.25 Frame per Second (FPS) on two different edge computing platforms, and the detection accuracy is comparable with the state-of-the-art models on the KITTI public dataset (i.e., 88.54% for cars, 71.94% for pedestrians and 73.04% for cyclists). The robustness and generalization ability of the PV-EncoNet for the 3D colored point cloud detection task is also verified by deploying it on the local vehicle platform and testing it on real road conditions.

An integrated zero common mode voltage (ZCMV) modulation algorithm is developed in this research for dual-parallel neutral-point-clamped (NPC) inverters treated as an integrated system. While the conventional methods achieve CMV elimination with the cost of worse harmonic performance, the proposed method guarantees zero CMV and better current quality simultaneously by taking advantage of the extra space vectors provided by paralleling. Specially designed switching sequences are developed to maintain a balanced neutral point of DC-bus and ensure the averaged circulating current being zero, which is critical to the parallel operation and normal function of NPC inverters. In addition, although the switching sequence design is complicated, a simple approach is proposed and implemented on a commonly used digital signal processor (DSP). A laboratory prototype is also developed and used to test the system performance under steady-state conditions and dynamic process in grid-connected operation. Compared with conventional ZCMV modulation, experimental results verify the effectiveness of the integrated modulation in eliminating CMV, in addition to the dramatically reduced output current distortion.

Overlapping community detection is essential for revealing the hidden structure of complex networks. In this work, we present an overlapping community detection algorithm that selects community centers adaptively based on density peaks. The proposed algorithm, called the density-peak-based overlapping community detection (DPOCD) algorithm, defines point link strength and edge link strength to construct distance matrix. Unlike the density peaks clustering algorithm, by which cluster centers are selected manually, the DPOCD algorithm uses the linear fitting method to select community centers. To evaluate the feasibility of the presented algorithm, we compared it with other advanced methods on artificial synthetic network and real complex network datasets. The experimental results demonstrate that our method achieves excellent performance in large-scale complex networks and the robustness of the algorithm.

The conventional maximum power point tracking (MPPT) controllers are unable to track the global maximum power point (GMPP) during partial shading conditions (PSCs). As a result, many optimization strategies have been used to track the GMPP. Optimization approaches, on the other hand, are iterative methods that cannot distinguish uniform shading conditions (USCs) from PSCs. In this paper, a new partial shading detection approach has been hybridized with the new modified rat swarm optimization algorithm (MRSO). It successfully distinguishes USCs from PSCs in two samples and triggers the MRSO only when the PSC is detected. Consequently, it avoids the excessive global peak search during the USCs, which improves the tracking time for USCs without an unnecessary scan of the entire P–V curve. Furthermore, the proposed MRSO, is simple to implement with simple tuning parameters and fast tracking speed for PSCs. The proposed method has been experimentally validated on a boost converter with a sampling time of 0.05 s. The experimental results showed the successful implementation of the proposed method with an average tracking time for uniform and PSCs of 0.42 s with an average steady-state efficiency of 99.8%. Subsequently, a comparison with state-of-the-art methods in this domain has been provided to assess the efficacy of the proposed method.

A fuzzy first order and second moment method (FFOSM) is proposed to efficiently estimate time-independent and time-dependent failure credibility in the presence of fuzzy uncertainty. For the time-independent linear performance function with independently, regularly and identically distributed fuzzy inputs, the analytical relationship is firstly derived between the failure credibility and fuzzy safety index, and the relation form is established between fuzzy safety index and fuzzy first two moments of the performance function. Secondly, in the standard space of fuzzy inputs, the minimum infinite norm distance from the coordinate origin to the linear limit state surface is analytically derived, and the point with the smallest infinite norm distance located on the limit state surface is defined as the fuzzy design point. Based on this definition, the geometric and physical meanings are explained for the fuzzy safety index and fuzzy design point, and the fuzzy first order and second moment method for time-independent failure credibility analysis is established for both linear and nonlinear performance function. Thirdly, for time-dependent performance functions, the equivalence is proved between time-dependent fuzzy safety index and the minimum value of transient fuzzy safety indices, on which the iteration steps of fuzzy first order and second moment method is designed for time-dependent fuzzy safety index and failure credibility estimation. Since the proposed fuzzy first order and second moment method is an approximately analytical approach, it has higher efficiency than the fuzzy simulation method and the cut level optimization method. Finally, the effectiveness and applicability of the proposed method are demonstrated by different examples.