Search

We have analyzed the behavior of a 10 cm long straight piece of MgB2 copper stabilized multifilamentary tape, manufactured by Columbus Superconductors, in a nearly adiabatic condition. The tape was biased at different current values as a function of either the temperature or the induced heat disturbances at fixed temperatures. From the analyses of the voltage increase, recorded from voltage taps placed at known positions, we estimated the highest temperatures which give rise to a quench of the tape at constant values of the current bias. We also measured the minimum energy triggering the quench at fixed values of current bias and temperature. The voltage taps have also been used for homogeneity check of the physical properties which rule the thermal runaway in the tape. The voltage-versus-time curves in different sections of the tape also provide information about the quench propagation speed as a function of the hot spot energy and the temperature. Due to the composite nature of the tape, made of nickel, iron, copper, and MgB2 to perform simple FEA computation we modeled the tape with a one dimensional single wire with averaged value of the physical quantities involved in the Joule heat generation and thermal conductivity.

Power transformers based on High Temperature Superconductors (HTS) technology are an appealing promise for several practical applications. The present designs still leave wide margins of possible improvement in terms of both layout optimisation and introduction of new technologies. In the framework of a technical-scientific cooperation among scientific and industrial subjects, a 10 kVA single-phase transformer was designed and manufactured, using copper for primary windings and BSCCO-2223 HTS tape for secondary windings. The layout has been optimized taking into account the particular characteristics of BSCCO tapes, in particular their AC losses, and the usual figures (stray flux, Joule and iron losses, weight and overall footprint) considered in transformers design. The prototype has then been realized and characterized, using general as well as specific tests. The performance of the device has been evaluated and compared with numerical calculation. In the paper, an overview of the device design and manufacturing will be presented, together with a critical comparison between computed and measured performance.