Search

Frontiers in physics 8, 568145 (2020). doi:10.3389/fphy.2020.568145, Published by Frontiers Media, Lausanne

Optoacoustic imaging is a medical imaging modality that uses optical excitation and acoustic detection to generate images of tissue structures based up optical absorption within a tissue sample. This imaging modality has been widely explored as a tool for a number of clinical applications, including cancer diagnosis and wound healing tracking. Recently, the optoacoustic imaging community has published a number of reports of hand-held optoacoustic imaging devices and platforms; these hand-held configurations improve the modality’s potential for commercial clinical implementation. Here, we review recent advancements in hand-held optoacoustic imaging platforms and methods, including recent pre-clinical applications, and we present an overview of the remaining limitations in optoacoustic imaging that must be addressed to increase the translation of the modality into commercial and clinical use. Keywords: Hand-held, Optoacoustic tomography, Photoacoustic microscopy, Multispectral, Raster scanning

Infrared (IR) spectromicroscopy, or chemical imaging, is an evolving technique that is poised to make significant contributions in the fields of biology and medicine. Recent developments in sources, detectors, measurement techniques and speciman holders have now made diffraction-limited Fourier transform infrared (FTIR) imaging of cellular chemistry in living cells a reality. The availability of bright, broadband IR sources and large area, pixelated detectors facilitate live cell imaging, which requires rapid measurements using non-destructive probes. In this work, we review advances in the field of FTIR spectromicroscopy that have contributed to live-cell two and three-dimensional IR imaging, and discuss several key examples that highlight the utility of this technique for studying the structure and chemistry of living cells.

Background In combined proton-carbon fixed-nozzle treatment facilities with raster scanning delivery, the scattering of proton pencil beams caused by nozzle elements and the relatively large nozzle-to-isocenter distance cause a beam broadening. This may pose limitations to the achievable dose conformity. One way to counteract this effect is by delivering the treatment in a position closer to the nozzle than the room isocenter. Purpose of this study was to assess the potential dosimetric benefit of such solution, in terms of dose conformity and normal tissue sparing, in intensity-modulated proton therapy (IMPT) of intracranial tumors. Material and methods For 12 patients with intracranial lesions, IMPT-plans were created at two treatment positions: nozzle-to-treatment-isocenter distance: 100 cm (room isocenter) and nozzle-to-treatment-isocenter distance: 60 cm. The resulting plans were compared in terms of dose distributions, dose-volume histograms and selected dosimetric indexes. Results With comparable target coverage, statistically significant normal tissue sparing was achieved through the reduction of the distance between nozzle and treatment isocenter. The decrease in mean dose (Dmean) was 12.5% to the whole brain, 16.2% to the brainstem, 9.7% and 15.4% to the temporal lobes, 10.0% and 12.9% to the hippocampi, 11.8% and 12.5% to the optic nerves and 0.2% to the chiasm. The volume receiving at least 10% of the prescribed dose (V10%) was reduced by more than 10% for most organs at risk (OARs). The maximum dose (Dnear-max) values to most OARs remained without significant difference. Conclusion A reduced distance between nozzle and treatment isocenter leads to steeper lateral dose gradients and significantly reduces the volume of OARs adjacent to the target, which receives low to intermediate doses. Technical solutions shifting the treatment isocenter closer to the nozzle should be considered in clinical situations, where critical OARs are adjacent to the beam channel and where the integral dose should be minimized.

Full-field optical coherence tomography (FFOCT) acquires image data in parallel. It has a big advantage in high-speed imaging because 2-dimensional mechanical raster scanning in the sample arm, which is essentially needed in a common fiber-based OCT system, does not exist anymore. Swept-source FFOCT (SSFFOCT) further makes the system free of depth scanning that significantly increases the operation speed. National Instrument's LabVIEW is a powerful tool to fast develop optical-electronic systems which have motion/vision units, signal processing functions and easy-to-generate Graphic User Interface (GUI). In this paper, we describe the design and implementation of Labview program prepared for an SSFFOCT system. Basically, there are four modules of Labview programming in such a system: 1. Wavelength sweeping control; 2. Synchronized image grabbing; 3. SSFFOCT signal processing; 4. 3-dimensional tomogram displaying mode selection. A general graphic user interface is used to input the parameters and monitor all necessary data and curves. The tomographic images can be displayed at any given cutting direction. More details and examples are provided and discussed. © 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE)., Photonics North 2011, May 16-18, 2011, Ottawa, Ontario, Canada, Series: Proceedings of SPIE; no. 8007

A high-frequency resonant horizontal scanner and a linearly driven vertical scanner at display frame rates can create a 2-D raster for video display. The combined motion of the two scanners forms a sinusoidal raster in the vertical direction where the raster line spacing is uniform only at the center and becomes progressively nonuniform towards the left and right edges of the display screen. Nonuniformities degrade the image quality and can be corrected by the addition of a third scanner to the system. Last year we reported the requirements and some of the early results in our MEMS-based raster correction scanner development effort. Since then, a lot of progress was made and the scanner was successfully incorporated into an SXGA resolution helmet-mounted display system. In this paper we report the results of thick copper coil development, new coil and magnet design for electromagnetic actuator, thermal flatness testing, new mounting design, and finally the performance measurements for the HMD system with a raster correction scanner., NA