Search

Impact melts are ubiquitous across the Moon, occurring in settings ranging from massive basin deposits to flows and ponds in and around small craters. Recent high spatial resolution imaging and spectroscopy datasets for the Moon have enhabled the identification and study of impact melt units at increasingly small spatial scales, including on the central peaks of complex craters. Lunar impact melts have unique physical properties at many scales (e.g. smooth appearances in visual imagery, low rock concentration implying smoothness and regolith cover at meter scale, high S-band radar returns implying roughness at decimeter scale, and possible anomalously low OMAT values), which may be due to their unique mode of emplacement or post-emplacement modification processes. We isolate impact melt regions in the crater interior of Jackson and Tycho as well as in the continuous ejecta blanket of Tycho using the geologic maps of Dhingra et al. (2017) and analyze their spectral, compositional, and physical properties utilizing datasets from the SELENE Multiband Imager and Terrain Camera, the LROC Narrow Angle Camera, and Diviner Lunar Radiometer. We leverage the unique high-slope setting of impact melts on the central peaks of these two craters to assess the influence of slope on post-emplacement modification processes, compared with unique physical properties of impact melts, on rock concentration and optical maturation. We find that slope is the primary control on optical maturity, while rock concentration plays a secondary role. We also find that melt units are generally more optically mature than their non-melt counterparts, and that this difference attenuates with distance from the crater center until no difference is noted in the continuous ejecta blanket. This suggests that melt units have different surface properties than the non-melt units in similar settings potentially due to the increased degree of shock they experienced during crater formation.

We present a small-scale mission concept to characterize the permanently shadowed regions of the lunar south pole. MARAUDERS aims to measure in situ for the first time the presence, distribution, and state of volatiles in one permanently shaded crater at a greater resolution than existing orbital measurements using up to 12 deployed impactors. A total of 15 permanently shadowed regions have been characterized as potential landing sites candidates for the probes. The science principle is based on penetrometry, that has proven in the past to be an efficient technique to estimate regolith properties from acceleration profiles. We demonstrate this concept by numerically simulating the surface interaction between our probes and the lunar regolith, thereby demonstrating how deceleration profiles can elucidate information on key regolith properties and help discriminate between two ice-regolith end-members. The preliminary payload design indicates that a good baseline for the impactors would be a spherical shell of 30–40 ​mm in size and ~90 ​g in mass per impactor, including electronics and the communication system. This would sum up to an overall payload of ~1 ​kg contained in a volume of ~15.10−4 ​m3, which is in agreement with a small-scale payload. Preliminary landing trajectory design enabled the computing of a nominal deployment scenario (with constraint on altitude, ejection velocity and spin rate) that would provide dispersions of the probes from ~250 ​m down to ~20 ​m if deployed from orbit, and down to ~10 ​m if deployed from a carrier lander/rover. Both scenarios will be able to comply with the MARAUDERS’ objectives to assess: (1) the presence (2) the distribution and (3) the surface strength heterogeneity (that can be traced back to the state of volatiles through lab experiments) of water-ice volatiles in permanently shadowed regions at a resolution ​

Most models of early lunar evolution predict that the anorthositic highlands crust is the result of plagioclase flotation on a magma ocean. However, the lunar highlands crust typically contains 4 wt% FeO and so is more mafic than the strict definition of the anorthosites thought to comprise it. We used new Clementine-based mineral maps of the Moon as inputs to a series of mixing models that calculate the abundance and distribution of major highland rock types and shed light on three possible sources of excess mafic material in the lunar highlands: mafic (15 vol% mafic minerals) anorthosites, post-magma ocean igneous activity, and mafic basin ejecta. Mixing models that feature pure anorthosites like the purest anorthosite (PAN) described by Ohtake et al. (2009) and Pieters et al. (2009) are most compatible with the data. They allow us to place an upper limit of 10–20 vol% mantle material that could be mixed with the primary highlands crust. The upper limit on mantle material indicated by the mixing models is significantly lower than the 30–40 vol% mantle material expected from simple geometric calculations of the major lunar basins’ excavation cavities based on an excavation cavity depth/diameter ratio of 1/10; this discrepancy allows us to conclude that the excavation cavities of the three largest lunar basins may have been significantly shallower than those of the smaller basins. Our results are consistent with excavation cavity depth/diameter ratios for these largest basins in the range of 0.035 to 0.06, which agrees with previous gravity measurements by Wieczorek and Phillips (1999).

Mineralogical measurements from spectral remote sensing and remote geochemical measurements from gamma-ray and neutron spectrometers are complementary data sets that have been used together successfully to study the distributions of iron, titanium, and rare earth elements on the Moon. We compare neutron and gamma-ray data sets from Lunar Prospector and find them in good agreement with each other within the errors of previously developed equations that relate neutron flux with geochemistry, but find small adjustments to the nominal values are warranted. We used the neutron-validated LP GRS oxides to improve Clementine-based global mineral maps. The comparison was enabled by converting the minerals of Lucey (2004) to oxides using stoichiometry and assumptions about Mg#, calcium content of clinopyroxenes, and An#. We find that FeO and Al 2 O 3 derived from the maps of Lucey (2004) do not follow the expected negative correlation seen in lunar samples, but can be brought into agreement with samples and with LP GRS oxides by increasing plagioclase in proportion with orthopyroxene abundance, while simultaneously decreasing Mg#. We interpreted this to mean that plagioclase and orthopyroxene exist in rocks together (as in a noritic rock) with the spectrally difficult to detect plagioclase being masked by the strong spectral signature of the orthopyroxene. We generated a revised set of maps of the major lunar minerals and a map of Mg# for the mafic minerals that are consistent with Lunar Prospector neutron and gamma-ray spectrometer results and show greatly improved agreement with lunar soil samples over previous global mineral maps from Clementine.

Three hyperspectral imaging systems have been implemented as microscopic hyperspectral imagers to support phenomenology studies at high spatial resolution. Wavelength ranges are VNIR (500 to 1000 nm), SWIR (1000 nm to 2500 nm) and LWIR (7 to 14 microns). The spatial resolution of the system at all wavelengths is 30 microns and covers a field of view of 8x30 mm. Samples are illuminated by rings of halogen lights and IR emitters for reflectance measurements and at thermal wavelengths can also be measured in thermal emission. Data are calibrated by scans of gold or Spectralon reflectance standards, and a flat plate blackbody for thermal emission measurements.

A global spectral survey of 4506 immature craters with diameters

Galactic cosmic rays are a potential energy source to stimulate organic synthesis from simple ices. The recent detection of organic molecules at the polar regions of the Moon by LCROSS (Colaprete, A. et al. [2010]. Science 330, 463–468, http://dx.doi.org/10.1126/science.1186986 ), and possibly at the poles of Mercury (Paige, D.A. et al. [2013]. Science 339, 300–303, http://dx.doi.org/10.1126/science.1231106 ), introduces the question of whether the organics were delivered by impact or formed in situ. Laboratory experiments show that high energy particles can cause organic production from simple ices. We use a Monte Carlo particle scattering code (MCNPX) to model and report the flux of GCR protons at the surface of the Moon and report radiation dose rates and absorbed doses at the Moon’s surface and with depth as a result of GCR protons and secondary particles, and apply scaling factors to account for contributions to dose from heavier ions. We compare our results with dose rate measurements by the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) experiment on Lunar Reconnaissance Orbiter (Schwadron, N.A. et al. [2012]. J. Geophys. Res. 117, E00H13, http://dx.doi.org/10.1029/2011JE003978 ) and find them in good agreement, indicating that MCNPX can be confidently applied to studies of radiation dose at and within the surface of the Moon. We use our dose rate calculations to conclude that organic synthesis is plausible well within the age of the lunar polar cold traps, and that organics detected at the poles of the Moon may have been produced in situ. Our dose rate calculations also indicate that galactic cosmic rays can induce organic synthesis within the estimated age of the dark deposits at the pole of Mercury that may contain organics.

The Thermal Hyperspectral Imager (THI) is a low cost, low mass, power efficient instrument designed to acquire hyperspectral remote sensing data in the long-wave infrared. The instrument has been designed to satisfy mass, volume, and power constraints necessary to allow for its accommodation in a 95 kg micro-satellite bus, designed by staff and students at the University of Hawai'i. THI acquires approximately 30 separate spectral bands in the 8–14 μm wavelength region, at 16 wavenumber resolution. Rather than using filtering or dispersion to generate the spectral information, THI uses an interferometric technique. Light from the scene is focused onto an uncooled microbolometer detector array through a stationary interferometer, causing the light incident at each detector at any instant in time to be phase shifted by an optical path difference which varies linearly across the array in the along-track dimension. As platform motion translates the detector array in the along-track direction at a rate of approximately one pixel per frame (the camera acquires data at 30 Hz) the radiance from each scene element can be sampled at each OPD, thus generating an interferogram. Spectral radiance as a function of wavelength is subsequently obtained for each scene element using standard Fourier transform techniques. Housed in a pressure vessel to shield COTS parts from the space environment, the total instrument has a mass of 15 kg. Peak power consumption, largely associated with the calibration procedure, is

TIRCIS (Thermal Infra-Red Compact Imaging Spectrometer), uses a Fabry-Perot interferometer, an uncooled microbolometer array, and push-broom scanning to acquire hyperspectral image data. Radiometric calibration is provided by blackbody targets while spectral calibration is achieved using monochromatic light sources. The instrument has a mass of

The mid-wave infrared is an especially informative wavelength range, permitting detection and characterization of a diverse range of materials and processes. The development of a new way to measure in this region, using a Sagnac interferometer spectrometer, has lead us to design the Miniaturized Infrared detector of Atmospheric Species (MIDAS). Instruments like MIDAS are attractive for space applications due to their low-mass and low-power consumption. An uncooled microbolometer and a cooled InSb photon detector version of MIDAS are currently set up for bench top characterization and preliminary science data collection.

Intact lunar lava tubes offer a pristine environment to conduct scientific examination of the Moon's composition and potentially serve as secure shelters for humans and instruments. We investigated the SELENE Lunar Radar Sounder (LRS) data at locations close to the Marius Hills Hole (MHH), a skylight potentially leading to an intact lava tube, and found a distinctive echo pattern exhibiting a precipitous decrease in echo power, subsequently followed by a large second echo peak that may be evidence for the existence of a lava tube. The search area was further expanded to 13.00–15.00°N, 301.85–304.01°E around the MHH, and similar LRS echo patterns were observed at several locations. Most of the locations are in regions of underground mass deficit suggested by GRAIL gravity data analysis. Some of the observed echo patterns are along rille A, where the MHH was discovered, or on the southwest underground extension of the rille.

The Thermal Infrared Compact Imaging Spectrometer (TIRCIS) is a long wave infrared (LWIR, 8-14 microns) hyperspectral imager designed as the follow-on to the University of Hawaii’s SUCHI (Space Ultra Compact Hyperspectral Imager). SUCHI is a low-mass (

The primary payload on the University of Hawaii-built ‘HiakaSat’ micro-satellite will be the Space Ultra Compact Hyperspectral Imager (SUCHI). SUCHI is a low-mass (

The University of Hawaii has developed a concept to ruggedize an existing thermal infrared hyperspectral system for use in the NASA SIERRA UAV. The Hawaii Institute of Geophysics and Planetology has developed a suite of instruments that acquire high spectral resolution thermal infrared image data with low mass and power consumption by combining microbolometers with stationary interferometers, allowing us to achieve hyperspectral resolution (20 wavenumbers between 8 and 14 micrometers), with signal to noise ratios as high as 1500:1. Several similar instruments have been developed and flown by our research group. One recent iteration, developed under NASA EPSCoR funding and designed for inclusion on a microsatellite (Thermal Hyperspectral Imager; THI), has a mass of 11 kg. Making THI ready for deployment on the SIERRA will involve incorporating improvements made in building nine thermal interferometric hyperspectral systems for commercial and government sponsors as part of HIGP’s wider program. This includes: a) hardening the system for operation in the SIERRA environment, b) compact design for the calibration system, c) reconfiguring software for autonomous operation, d) incorporating HIGP-developed detectors with increased responsiveness at the 8 micron end of the TIR range, and e) an improved interferometer to increase SNR for imaging at the SIERRA’s air speed. UAVs provide a unique platform for science investigations that the proposed instrument, UAVTHI, will be well placed to facilitate (e.g. very high temporal resolution measurements of temporally dynamic phenomena, such as wildfires and volcanic ash clouds). Its spectral range is suited to measuring gas plumes, including sulfur dioxide and carbon dioxide, which exhibit absorption features in the 8 to 14 micron range.

The Space Ultra Compact Hyperspectral Imager is a long wave infrared hyperspectral imager being built at the University of Hawaii. The sensor will be the primary payload on the HiakaSat small satellite scheduled for launch on the Office of Responsive Space ORS-4 mission, and planned for a 6 month primary mission which is extendable up to two years of operation on orbit. SUCHI is based on a variable-gap Fabry-Perot interferometer employed as a Fourier transform spectrometer and uses an uncooled 320x256 microbolometer array to collect the images. The sensor is low volume (16” x 4” x 5") and low mass (

LWIR hyperspectral imaging has a wide range of civil and military applications with its ability to sense chemical compositions at standoff ranges. Most recent implementations of this technology use spectrographs employing varying degrees of cryogenic cooling to reduce sensor self-emission that can severely limit sensitivity. We have taken an interferometric approach that promises to reduce the need for cooling while preserving high resolution. Reduced cooling has multiple benefits including faster system readiness from a power off state, lower mass, and potentially lower cost owing to lower system complexity. We coupled an uncooled Sagnac interferometer with a 256x320 mercury cadmium telluride array with an 11 micron cutoff to produce a spatial interferometric LWIR hyperspectral imaging system operating from 7.5 to 11 microns. The sensor was tested in ground-ground applications, and from a small aircraft producing spectral imagery including detection of gas emission from high vapor pressure liquids. © (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

The traditional model for space-based earth observations involves long mission times, high cost, and long development time. Because of the significant time and monetary investment required, riskier instrument development missions or those with very specific scientific goals are unlikely to successfully obtain funding. However, a niche for earth observations exploiting new technologies in focused, short lifetime missions is opening with the growth of the small satellite market and launch opportunities for these satellites. These low-cost, short-lived missions provide an experimental platform for testing new sensor technologies that may transition to larger, more long-lived platforms. The low costs and short lifetimes also increase acceptable risk to sensors, enabling large decreases in cost using commercial off the shelf (COTS) parts and allowing early-career scientists and engineers to gain experience with these projects. We are building a low-cost long-wave infrared spectral sensor, funded by the NASA Experimental Project to Stimulate Competitive Research program (EPSCOR), to demonstrate the ways in which a university's scientific and instrument development programs can fit into this niche. The sensor is a low-mass, power efficient thermal hyperspectral imager with electronics contained in a pressure vessel to enable the use of COTS electronics, and will be compatible with small satellite platforms. The sensor, called Thermal Hyperspectral Imager (THI), is based on a Sagnac interferometer and uses an uncooled 320x256 microbolometer array. The sensor will collect calibrated radiance data at long-wave infrared (LWIR, 8-14 microns) wavelengths in 230-meter pixels with 20 wavenumber spectral resolution from a 400-km orbit.