Search

Tris(trimethylsilyl)borate (TMSB) has been intensively studied to improve the performances of lithium-ion batteries. However, it is still an interesting issue needed to be resolved for the research on the Li+ solvation structure affected by TMSB additive. Herein, the electrochemical tests, quantum chemistry calculations, potential-resolved in-situ electrochemical impedance spectroscopy measurements and surface analyses were used to explore the effects of Li+ solvation structure with TMSB additive on the formation of the cathode electrolyte interface (CEI) film in LiNi0.8Co0.1Mn0.1O2/Li half cells. The results reveal that the TMSB additive is easy to complex with Li+ ion, thus weaken the intermolecular force between Li+ ions and ethylene carbonate solvent, which is benefit for the cycle performance. Besides, the changed Li+ solvation structure results in a thin and dense CEI film containing compounds with Si–O and B–O bonds which is favorable to the transfer of Li+ ions. As a result, the performances of the LNCM811/Li half cells are effectively improved. This research provides a new idea to construct a high-performance CEI film by adjusting the Li+ solvation structures.

Electronic structure of organic semiconductor that is governed by the packing structure in the solid state is critically important for the transport properties of organic-semiconductor solid. Dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophenes (DNTT), which has been utilized as an active semiconducting material in high-performance organic field-effect transistors (OFETs), crystalized into a herringbone packing structure that affords the two-dimensional (2D) electronic structure. Here we have investigated effects of substituents on the packing structure of a series of DNTT derivatives modified with a (trialkylsilyl)ethynyl substituents. The packing structures of the derivatives with small (trialkylsilyl)ethynyl substituents, such as (trimethylsilyl)ethynyl (TMSE) (1) and (triethylsilyl)ethynyl (TESE) groups (2), were revealed to be the herringbone packing, whereas (triisopropylsilyl)ethynyl (TIPSE)-substituted DNTT (3) crystalized into a sandwich herringbone structure, in which face-to-face dimers of molecules are packed into a herringbone array. In-depth analyses of the packing structures by means of the functional-group symmetry-adapted perturbation theory (F-SAPT) calculations showed that the size of the TESE groups is critical to determine the packing structure; intermolecular interaction between the sterically demanding TIPSE groups does not allow 3 to crystalize into the herringbone structure that is favorable for the most of DNTT derivatives including 1 and 2. Although the sandwich herringbone structure has not been regarded as a potential one for efficient carrier transport in the solid state, the OFETs based on 1−3 showed comparable high mobility of 0.34 to 1.1 cm2 V−1 s−1, indicating that the sandwich herringbone structure is not necessarily quite unsuitable for carrier transport, which was also endorsed by the transfer integrals calculated based on the packing structure elucidated by the single crystal X-ray analysis. These results imply that versatile modifications on the molecular and packing structures can be applied to the DNTT core for the development of superior organic semiconductors.

Manganese dioxide (α-MnO2) and graphene oxide (GO nanocomposites were prepared and successfully characterized using Fourier-transform infrared (FT-IR), field emission scanning-electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDX) mapping methods and Xray diffraction (XRD) analyses. This reagent is an efficient catalyst for the aerobic oxidation of trimethylsilyl (TMS), tetrahedropyranyl (THP), and methoxymethyl ethers (MOM) to their corresponding carbonyl compounds in the presence of K2CO3. All reactions were performed in n-hexane under mild and completely heterogeneous reaction conditions. Our novel method has the advantages of excellent yields, short reaction times, availability and reusability of the catalyst and simple and easy work-up procedure compared to the conventional methods reported in the literature.

An efficient synthesis (up to a 200 g scale) of 3-hydroxypyrrolidin-2-ones bearing alkyl substituents or functional groups at the C-5 position is described. The reaction sequence started from 1,3-dipolar cycloaddition of in situ generated nitrile oxides with (meth-)acrylates into 3-substituted isoxazoline-5-carboxylates. The catalytic hydrogenolysis of the isoxazoline N-O bond was optimal upon using H2 (1 atm) at rt, with the following order of the catalyst activity: Pd-C > Pd(OH)2-C > Pt-C. The reactions with Pt-C were more selective for the synthesis of pyrrolidones, while Pd-C provided the fastest conversion rates. The stirring efficiency had a positive impact on conversion rather than elevated temperatures (up to 40 °C) or pressure (up to 50 atm). The diastereoselectivity was governed mainly by steric factors, with a dr of 1:1 to 3:1 (cis- and trans-isomers could be separated). Higher homologues (isoxazolinylacetates and -propanoates) were suitable for the synthesis of 6- or 7-substituted 4-hydroxypiperidones and 5-hydroxyazepanones, respectively. The proposed methods are tolerant to functional groups, including CF3 (but not CHF2 or CH2Cl), ester, and most N-Boc-protected amines. The utility of hydroxyl groups in lactams was shown by functional group transformations. Hydrogenolysis of C(5)-functionalized isoxazolines, bearing trimethylsilyl, phosphonate, or sulfone groups, was also studied to demonstrate limitations.

We report the isolation of vanadium(II) in a metal-organic framework (MOF) by the reaction of the chloride-capped secondary building unit in the all-vanadium(III) V-MIL-101 (1) with 1,4-bis(trimethylsilyl)-2,3,5,6-tetramethyl-1,4-dihydropyrazine. The reduced material, 2, has a secondary building unit with the formal composition [VIIV2III], with each metal ion presenting one open coordination site. Subsequent reaction with O2 yields a side-on η2 vanadium-superoxo species, 3. The MOF featuring V(III)-superoxo moieties exhibits a mild enhancement in the isosteric enthalpy of adsorption for methane compared to the parent V-MIL-101. We present this synthetic methodology as a potentially broad way to access low-valent open metal sites within MOFs without causing a loss of crystallinity or porosity. The low-valent sites can serve as isolable intermediates to access species otherwise inaccessible by direct synthesis.

The use of iminophosphoryl-tethered ruthenium carbene complexes for activation of secondary phosphine P-H bonds is reported. Complexes of type [(p-cymene)-RuC(SO 2 Ph)(PPh 2 NR)] (with R = SiMe 3 or 4-C 6 H 4 -NO 2 ) were found to exhibit different reactivities depending on the electronics of the applied phosphine and the substituent at the iminophosphoryl moiety. Hence, the electron-rich silyl-substituted complex undergoes cyclometallation or shift of the imine moiety after cooperative activation of the P-H bond across the M=C linkage, depending on the electronics of the applied phosphine. Deuteration experiments and computational studies proved that cyclometallation is initiated by the activation process at the M=C bond and triggered by the high electron-density at the metal in the phosphido intermediates. Consistently, replacement of the trimethylsilyl (TMS) group by the electron-withdrawing 4-nitrophenyl substituent allowed for the selective cooperative P-H activation to form stable activation products.

The reaction of 2 equiv of LiN(SiMe3)2·Et2O with TiCl3(NMe3)2 or VCl3(NMe3)2 afforded the dimeric, halide bridged complexes [Ti(μ-Cl){N(SiMe3)2}2]2 (1) or [V(μ-Cl){N(SiMe3)2}2]2 (2) in moderate yields. The reduction of titanium complex 1 with 3 equiv of 5% (wt) Na/NaCl gave the mixed metal titanium/sodium hydride cluster Ti2(μ-H)2{N(SiMe3)2}3{N(SiMe3)(SiMe2CH)}(Na) (3), which was formed by activation of two C-H bonds at a single methyl group of one of the bis(trimethylsilyl)amide ligands. Attempts to form the analogous vanadium complex by reduction of 2 gave only intractable products. Treatment of Co{N(SiMe3)2}2 with 1 equiv of BrN(SiMe3)2 (which was previously shown to give the unique three-coordinate cobalt(III) trisamide Co{N(SiMe3)2}3) afforded the polymeric [(μ-Br)Co{μ-N(SiMe3)(SiMe2CH2CH2Me2Si)(Me3Si)μ-N}Co(μ-Br)]∞ (4) as a second product, which was shown by a structural analysis to possess a carbon-carbon bond formed between the two ligands. Attempts to isolate manganese and iron complexes analogous to 4 were unsuccessful. The role of bromine in these reactions was further studied by examining the reaction of 0.5 equiv of elemental bromine with [Mn{N(SiMe3)2}2]2 or [Co{N(SiMe3)2}2]2, which for manganese was shown to give the previously reported manganese trisamide Mn{N(SiMe3)2}3 but for cobalt gives the dimeric amide-bridged [Co(Br){μ-N(SiMe3)2}]2 (5).

A variety of 4-trifluoromethylquinolines bearing an aryl (or cyclopropyl, tert-butyl, trimethylsilyl) group at C-2 and a nitro group at ring position 6, 7 or 8 have been prepared in good to high yields from 3-substituted 1-(trifluoromethyl)prop-2-yne 1-iminium triflate salts and o-, m- or p-nitroaniline. These reactions include an aza-Michael reaction at room temperature followed by an intramolecular electrophilic aromatic substitution step, which requires additional thermal activation in most cases. In contrast, the conjugate addition of 2,4-dinitroanilines at the acetylenic iminium ions proceeds much more slowly and some of the adducts can be converted thermally into 2-(2,4-dinitrophenyl)-5-trifluoromethylpyrroles. Analogously, 2-(4-pyridyl)-5-trifluoromethylpyrroles were obtained from 3-aryl-1-(trifluoromethyl)propyn­iminium salts and 4-aminopyridinium triflate. A novel variation of the Truce–Smiles rearrangement is probably involved in the formation of these pyrroles.

The synthesis of 1,1-difluoro-1-alkenes was achieved by the treatment of dithioesters and thioketones with trimethylsilyl 2-fluorosulfonyl-2,2-difluoroacetate in the presence of a proton sponge cat...

The title compound was made by the reaction of the CpCo-complex of 2,3,7,8-tetrakis(trimethylsilyl) linear [3]phenylene, in which the metal coordinates one of the cyclobutadiene rings, with CpCo(C2H4)2. Because of its relative stability, a syn-dicobalt-bound configuration is indicated rather than its anti alternative.

We described several postprocessing methods to measure protein concentrations in human urine from existing 1H nuclear magnetic resonance (NMR) metabolomic spectra: (1) direct spectral integration, (2) integration of NCD spectra (NCD = 1D NOESY-CPMG), (3) integration of SMolESY-filtered 1D NOESY spectra (SMolESY = Small Molecule Enhancement SpectroscopY), (4) matching protein patterns, and (5) TSP line integral and TSP linewidth. Postprocessing consists of (a) removal of the metabolite signals (demetabolization) and (b) extraction of the protein integral from the demetabolized spectra. For demetabolization, we tested subtraction of the spin-echo 1D spectrum (CPMG) from the regular 1D spectrum and low-pass filtering of 1D NOESY by its derivatives (c-SMolESY). Because of imperfections in the demetabolization, in addition to direct integration, we extracted protein integrals by the piecewise comparison of demetabolized spectra with the reference spectrum of albumin. We analyzed 42 urine samples with protein content known from the bicinchoninic acid (BCA) assay. We found excellent correlation between the BCA assay and the demetabolized NMR integrals. We have provided conversion factors for calculating protein concentrations in mg/mL from spectral integrals in mM. Additionally, we found the trimethylsilyl propionate (TSP, NMR standard) spectral linewidth and the TSP integral to be good indicators of protein concentration. The described methods increase the information content of urine NMR metabolomics spectra by informing clinical studies of protein concentration.

Tandem [4+2]/[4+2] cycloaddition between bis-dienes containing two furan rings and dehydrobenzene as a dienophile was studied. It was shown that dehydrobenzene generated in situ from 2-(trimethylsilyl)phenyl trifluoromethanesulfonate is capable of a facile intermolecular [4+2] cycloaddition to a furan moiety of a diene at room temperature. The next step, that involves intramolecular Diels–Alder reaction (the IMDAF reaction) with the second furan ring, requires elevated temperature up to 80°С. It has been shown that even under optimal conditions the yields of the target annulated 1,4:5,8-diepoxynaphthalenes do not exceed 50%. The main byproducts are double cycloaddition adducts formed during the interaction of two aryne subunits with both furan rings of the initial bis-diene.

Tri-tert-butylphosphatetrahedrane (1) is shown here to act as a synthon of isomeric tri-tert-butylphosphacyclobutadiene in the presence of a Lewis acid or transition-metal complex. When it is combined with a substoichiometric amount of triphenylborane, compound 1 forms a ladderane-type dimer of tri-tert-butylphosphacyclobutadiene in 72% isolated yield. Trapping of a generated intermediate was achieved by repeating the experiment in the presence of excess styrene (20 equiv) or ethylene (1 atm), and the corresponding [4 + 2] cycloadducts of tri-tert-butylphosphacyclobutadiene were isolated in 88% and 74% yields, respectively. The platinum complex (Ph3P)2Pt(C2H4) also reacts with 1 to form an orange η2 complex of tri-tert-butylphosphacyclobutadiene in 80% isolated yield. Additionally, we report a novel method for generating a phosphinidenoid species via fluoride-induced trimethylsilyl fluoride elimination, leading to an improved preparative procedure for 1 (182 mg, 33% isolated yield).

Lewis-base coordinated iminoborane adducts, in contrast to their isoelectronic analogue imines, remain largely unexplored given the lack of efficient synthetic strategies for generating robust compounds. Herein, we report the preparation of a cyclic amino iminoborane carbene complex 2 obtained in quantitative yield by adding NHC to the 1,8-(trimethylsilyl)aminonaphthalene complex of boron 1 to induce the elimination of trimethylsilyl chloride (TMSCl). The iminoborane-NHC adduct 2 shows unprecedented thermal stability both in the solid and solution phases, due to the rigid, pre-established geometry of the 1,8-diaminonaphthalene scaffold. Theoretical calculations reveal an exceptionally strong iminoborane-NHC bond as a consequence of the enhanced boron-center acidity in combination with the lower steric and electronic shielding. We show that the chemical bond can be understood as donor-acceptor interaction, leading to a different kind of electronic situation of the B═N π-bond. The high conjugation between the pz-lone pair of the tricoordinated sp2 hybridized N atom and the B═N π-system results in a particularly long B═N double bond distance. Taking advantage of the pendant lone pair of the dicoordinated sp2 hybridized N atom, the iminoborane-NHC adduct gives access to NHC-stabilized borenium cation 3 through the reaction with trimethylsilyl triflate (Me3SiOTf) or to the gallium adduct 4 by reacting with GaCl3. Incorporating an iminoborane functional group into a π-conjugated system brings a new bonding situation for broadening the scope of BN-containing polyaromatic systems.

A new practical method for construction of 3D porous carbon was developed through molecular design via one-step synthesis from commercially available carbon tetrabromide and bis(trimethylsilyl)acetylene on a gram-scale, and the obtained porous carbon has a well-defined sp1 -sp3 all-carbon structure (C13 ), high stability, and high surface area.

An efficient method has been developed for the synthesis of benzofuro[3,2-b]quinolines through tandem [4+2] cycloaddition/ aromatization under transition-metal-free conditions. A range of aurone­-derived N-tosyl-1-azadienes smoothly reacted with arynes, generated­ in situ via fluoride ion-induced 1,2-elimination of 2-(trimethyl­silyl)aryl triflates, delivering structurally diverse benzofuro[3,2-b]quinolines in moderate to good yields.

A block copolymer that can be thermally cross-linked is synthesized by copolymerization of N-phenyl-2-vinylcarbazole (A) and trimethyl(2-(4-vinylphenyl)ethynyl)silane (B), followed by a deprotection reaction (d-PBAB). A triblock copolymer containing carbazole and (trimethylsilyl)ethynyl groups (PBAB) is first prepared using potassium naphthalenide in tetrahyrdofuran at −78 °C for 60 min. Well-controlled poly(A) and PBAB can be obtained under the conditions employed in this anionic block copolymerization. The well-defined d-PBAB with thermally cross-linkable ethynyl group is then prepared by the deprotection of the trimethylsilyl group from PBAB without side reactions. The thermal cross-linking behavior of d-PBAB is investigated using thermogravimetric analysis and differential scanning calorimetry. The d-PBAB is cross-linked under different conditions, and it is observed that the d-PBAB film heated at 250 °C for 60 min shows excellent solvent resistance and increased film density. In addition, the highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels of cross-linked d-PBAB are estimated to be −5.09 and −1.57 eV, respectively.

International audience; A series of acetyl pyrenes and pyrenyl ynones with and without tert-butyl groups showed distinct mechanofluorochromism (MFC). Four pairs of polymorphic solids were found out of six compounds and interestingly, each of them showed hypsochromic, bathochromic or off-to-on MFC. The MFC properties were rationalized by categorizing the packing schemes into herringbone, sandwich, beta and gamma motifs depending on the relative contributions of C⋯C (or π-π) against C⋯H contacts. The bulky tertbutyl and trimethylsilyl groups served not only to reduce the number of aggregation patterns but also to prohibit the complete back reactions in solid state. Our results suggest that the simple pyrene derivatives may be promising candidates for a novel group of mechanically-sensitive materials.

The work by MacMillan et al. ( Angew. Chem., Int. Ed. 2018, 57, 12543-12548) developed an IrIII/NiII-metallaphotoredox-catalyzed difluoromethylation strategy of aryl bromides using CHF2Br as the CHF2 reagent in the presence of tris(trimethylsilyl)silane. Here, we present a density functional theory (DFT)-based computational study to understand special dual catalysis promoting the C(sp2)-C(sp3) coupling. The calculated results show that the energetically more favorable pathway involves the reductive quenching of a photocatalyst (IrIII/*IrIII/IrII/IrIII) and a Ni0-initiated catalytic cycle (Ni0/NiI/NiIII/NiI/Ni0 or Ni0/NiII/NiIII/NiI/Ni0). The calculations reveal not only the mechanistic details delivering the difluoromethylarene product but also the molecular-level picture of the generation of Ni0 species from the NiII precatalyst. Moreover, the calculations also rationalize the observed stoichiometric effect of CHF2Br in the reactions of aryl bromides with different substituted groups.

Constructing synthetic models of the nitrogenase PN -cluster has been a long-standing synthetic challenge. Here, we report an optimal nitrogenase PN -cluster model [{(TbtS)(OEt2 )Fe4 S3 }2 (μ-STbt)2 (μ6 -S)] (2) [Tbt=2,4,6-tris{bis(trimethylsilyl)methyl}phenyl] that is the closest synthetic mimic constructed to date. Of note is that two thiolate ligands and one hexacoordinated sulfide are connecting the two Fe4 S3 incomplete cubanes similar to the native PN -cluster, which has never been achieved. Cluster 2 has been characterized by X-ray crystallography and relevant physico-chemical methods. The variable temperature magnetic moments of 2 indicate a singlet ground state (S=0). The Mossbauer spectrum of 2 exhibits two doublets with an intensity ratio of 3:1, which suggests the presence of two types of iron sites. The synthetic pathway of the cluster 2 could indicate the native PN -cluster maturation process as it has been achieved from the Fe4 S4 cubane Fe4 S4 (STbt)4 (1).

On-surface synthesis is a powerful method for the fabrication of π-conjugated nanomaterials. Herein, we demonstrate chemoselective Sonogashira coupling between (trimethylsilyl)ethynyl and chlorophenyl groups in silylethynyl- and chloro-substituted partially fluorinated phenylene ethynylenes (SiCPFPEs) on Ag(111). The desilylative Sonogashira coupling occurred with high chemoselectivity up to 75 %, while the competing Ullmann and desilylative Glaser homocoupling reactions were suppressed. A combination of bond-resolved scanning tunneling microscopy/atomic force microscopy (STM/AFM) and DFT calculations revealed that the oligomers were obtained by the formation of intermolecular silylene tethers (-Me2 Si-) through CH3 -Si bond activation at 130 °C and subsequent elimination of the tethers at an elevated temperature of 200 °C.

Funding Information: The financial support of the Austrian Federal Ministry of Digital and Economic Affairs and the National Foundation for Research, Technology and Development , Austria, is gratefully acknowledged. We also thank the industrial partners Mondi, Canon Production Printing, Kelheim Fibres, and SIG Combibloc for their support. Publisher Copyright: © 2021 Copyright: Copyright 2021 Elsevier B.V., All rights reserved. Hydrophobization of cellulosic materials and particularly paper products is a commonly used procedure to render papers more resistant to water and moisture. Here, we explore the hydrophobization of unsized paper sheets via the gas phase. We employed three different compounds, namely palmitoyl chloride (PCl), trifluoroacetic anhydride/acetic anhydride (TFAA/Ac2O)) and hexamethyldisilazane (HMDS) which were vaporized and allowed to react with the paper sheets via the gas phase. All routes yielded hydrophobic papers with static water contact angles far above 90° and indicated the formation of covalent bonds. The PCl and TFAA approach negatively impacted the mechanical and optical properties of the paper leading to a decrease in tensile strength and yellowing of the sheets. The HMDS modified papers did not exhibit any differences regarding relevant paper technological parameters (mechanical properties, optical properties, porosity) compared to the non-modified sheets. XPS studies revealed that the HMDS modified samples have a rather low silicon content, pointing at the formation of submonolayers of trimethylsilyl groups on the fiber surfaces in the paper network. This was further investigated by penetration dynamic analysis using ultrasonication, which revealed that the whole fiber network has been homogeneously modified with the silyl groups and not only the very outer surface as for the PCl and the TFAA modified papers. This procedure yields a possibility to study the influence of hydrophobicity on paper sheets and their network properties without changing structural and mechanical paper parameters.

Silylacetal was demonstrated to function as a promising cleavable moiety for preparing polymers degradable via desilylation under diverse, mild conditions. The silylacetal moieties were installed in the main chain of the polymers via the controlled cationic copolymerization of trimethylsilyl vinyl ether (TMSVE) and a cyclic acetal under appropriately designed conditions. Importantly, desilylation reactions of the silylacetal units occurred under weak acid, base, or fluoride ion conditions, which triggered the degradation of the polymer via the spontaneous cleavage of the unstable hemiacetal moieties generated by the desilylation. Moreover, silylacetal moieties were successfully incorporated at the desired positions in the main chain via the addition of a small portion of TMSVE during the controlled cationic copolymerization of a vinyl ether and cyclic acetal. The strategy devised in this study will allow the design of elaborate polymers that undergo degradation triggered by various stimuli.

Nuclear magnetic resonance (NMR)-based screening of materials is a powerful tool for quality control, authenticity testing, and purity testing of compounds. However, reliance on 3-(trimethylsilyl)-propane-1-sulfonate (DSS) and 3-(trimethylsilyl)propanoic acid (TMSP) for referencing the spectra of aqueous samples is not without hazard, particularly with automated analyses. The assumption that these reference signals always represent 0 ppm is ubiquitous in NMR spectroscopy and is routinely used for spectral alignment. However, it has been found that cyclodextrins readily generate inclusion complexes with DSS and TMSP with the effect of rendering this assumption incorrect. These inclusion complexes alter the electronic shielding of the trimethylsilane functional groups on DSS and TMSP yielding a small, but significant, shift to a higher frequency in the signal relied upon for spectral referencing. As a result, samples containing traces of these compounds may be incorrectly declared fraudulent, inconsistent with standards, or adulterated. In order to maintain the viability of this screening method, vigilance and/or improved referencing of spectra is needed.

A formal (3+2) annulation reaction between isatin-derived N-tosylhydrazones and o-(trimethylsilyl)aryl triflates allows facile synthesis of spiro[indazole-3,3′-indolin]-2′-ones in high to excellent yields. Furthermore, indazolo[2,3-c]quinazolin-6(5H)-ones could be accessed from the same starting materials in one-pot fashion via an annulation/rearrangement pathway.

The chemistry of silylated sulfuric acid, O2 S(OSiMe3 )2 (T2 SO4 , T=Me3 Si; also known as bis(trimethylsilyl) sulfate), has been studied in detail with the aim of synthesizing the formal autosilylation products of silylated sulfuric acid, [T3 SO4 ]+ and [TSO4 ]- , in analogy to the known protonated species, [H3 SO4 ]+ and [HSO4 ]- . The synthesis of the [TSO4 ]- ion only succeeds when a base, such as OPMe3 that forms a weakly coordinating cation upon silylation, is reacted with T2 SO4 , resulting in the formation of [Me3 POT]+ [TSO4 ]- . [T3 SO4 ]+ salts could be isolated starting from T2 SO4 in the reaction with [T-H-T]+ [B(C6 F5 )4 ]- or T+ [CHB11 Br6 H5 ]- when a weakly coordinating anion is used as counterion. All silylated compounds could be crystallized and structurally characterized.

In this article, two aliphatic and aromatic types of dicationic acidic ionic liquids formulated as [H2-DABCO][ClO4], [H2-Bisim][ClO4]2 were used for the acceleration of the protection of alcohols as their corresponding trimethylsilyl (TMS), tetrahydropyranyl (THP) and methoxymethyl (MOM) ethers and the achieved results were compared. The performance of the catalyst was equal. All reactions were performed under mild conditions with good to high yields during short reaction times. Although in most cases the performance of both of the catalysts is equal, but TMS protection in the presence of [H2-Bisim][ClO4]2 needed lower amounts of the catalyst.

A series of rhenium complexes bearing a pyridine-based PNP-type pincer ligand are synthesized from rhenium phosphine complexes as precursors. A dinitrogen-bridged dirhenium complex bearing the PNP-type pincer ligands catalytically converts dinitrogen into ammonia during the reaction with KC8 as a reductant and [HPCy3 ]BArF 4 (Cy=cyclohexyl, ArF =3,5-(CF3 )2 C6 H3 ) as a proton source at -78 °C to afford 8.4 equiv of ammonia based on the rhenium atom of the catalyst. The rhenium-dinitrogen complex also catalyzes silylation of dinitrogen in the reaction with KC8 as a reductant and Me3 SiCl as a silylating reagent under ambient reaction conditions to afford 11.7 equiv of tris(trimethylsilyl)amine based on the rhenium atom of the catalyst. These results demonstrate the first successful example of catalytic nitrogen fixation under mild reaction conditions using rhenium-dinitrogen complexes as catalysts.

The beneficial role of lithium bis(trimethylsilyl) phosphate (LiTMSP), which may act as a novel bifunctional additive for high-voltage LiNi1.5Mn0.5O4 (LNMO)/graphite cells, has been investigated. LiTMSP is synthesized by heating tris(trimethylsilyl) phosphate with lithium tert-butoxide. The cycle performance of LNMO/graphite cells at 45 °C significantly improved upon incorporation of LiTMSP (0.5 wt %). Nuclear magnetic resonance analysis suggests that the trimethylsilyl (TMS) group in LiTMSP can react with hydrogen fluoride (HF), which is generated through the hydrolysis of lithium hexafluorophosphate (LiPF6) by residual water in an electrolyte solution or water generated via oxidative electrolyte decomposition reactions to form TMS fluoride. Inhibition of HF leads to a decrease in the concentration of transition-metal ion-dissolution (Ni and Mn) from the LNMO electrode, as determined by inductively coupled plasma mass spectrometry. In addition, the generation of the superior passivating surface film derived by LiTMSP on the graphite electrode, suppressing further electrolyte reductive decomposition as well as deterioration/reformation caused by migrated transition metal ions, is supported by a combination of chronoamperometry, X-ray photoelectron spectroscopy, and field-emission scanning electron microscopy. Furthermore, a LiTMSP-derived surface film has better lithium ion conductivity with a decrease in resistance of the graphite electrode, as confirmed by electrochemical impedance spectroscopy, leading to improvement in the rate performance of LNMO/graphite cells. The HF-scavenging and film-forming effects of LiTMPS are responsible for the less polarization of LNMO/graphite cells enabling improved cycle performance at 45 °C.

The behavior of organic and organosilicon nitrogen-containing compounds such as N-(trimethylsilyl)N-(2-{2-[(trimethylsilyl)oxy]ethoxy]}ethyl)amine and 4-(trimethylsilyl)morpholine in the reactions with organic and organosilicon isocyanates has been studied. The effect of the substituent at the nitrogen atom on the composition, structure, and hydrolytic stability of the resulting products has been revealed.

The reactions of N-trimethylsilyl derivatives of α- and β-amino acid esters with sulfur tetrafluoride lead to the formation of the corresponding difluorides of imidosulfurous acids F2S=N-X (X = α o...

Lithium trimethylsilyldiazomethanide and a cobalt (II) precursor with an N-anchored tris-NHC (TIMENmes ) ligand provide access to the cobalt nitrilimide 1. Complex 1 was structurally characterized by single-crystal X-ray diffractometry (SC-XRD) and its electronic structure was examined in detail, including EPR spectroscopy, SQUID magnetometry and computational analyses. The desilylation of the C-(trimethylsilyl)nitrilimide reveals a transient complex with an elusive diazomethanediide ligand, which substitutes one of the mesitylene rings of the ancillary ligand through C-N bond cleavage. This transformation results in the cyclometalated cobalt(II) complex 2, featuring a rare isocyanoamido-κ-C ligand.

A number of previously unknown and difficultly accessible polyfunctional β-chloro-β-(trimethyl­silyl)prop-2-enoic acid amides and hydrazides have been synthesized by amination of 3-chloro-3-(trimethyl­silyl)­prop-2-enoyl chloride with the corresponding amines, amino alcohols, 2-amino-4-methylpentanoic acid, and hydrazines. Initial 3-chloro-3-(trimethylsilyl)prop-2-enoyl chloride has been prepared by hydrohalogenation of 3-trimethylsilylpropynoic acid with thionyl chloride in DMF, followed by treatment with oxalyl chloride.

Glycosidation plays a pivotal role in the synthesis of O-glycosides and nucleosides that mediate a diverse range of biological processes. However, efficient glycosidation approach for the synthesis of both O-glycosides and nucleosides remains challenging in terms of glycosidation yields, mild reaction conditions, readily available glycosyl donors, and cheap promoters. Here, we report a versatile N-iodosuccinimide/trimethylsilyl triflate (NIS/TMSOTf)-promoted glycosidation approach with glycosyl ortho-hexynylbenzoates as donors for the highly efficient synthesis of O-glycosides and nucleosides. The glycosidation approach highlights the merits of mild reaction conditions, cheap promoters, extremely wide substrate scope, and good to excellent yields. Notably, the glycosidation approach performs very well in the construction of a series of challenging O- and N-glycosidic linkages. The glycosidation approach is then applied to the efficient synthesis of oligosaccharides via the one-pot strategy and the stepwise strategy. On the basis of the isolation and characterization of the departure species derived from the leaving group, a plausible mechanism of NIS/TMSOTf-promoted glycosidation of glycosyl ortho-hexynylbenzoates is proposed.

The methanol extract of Camellia sinensis (MES) and acetone extract of Camellia assamica (AEA) were subjected to the thin layer chromatography to separate the bioactive compounds. The antimicrobial activity of all the fractions was carried out against pathogenic microorganisms by the agar-well diffusion method. The most effective bioactive fraction of each plant species was analysed by GC–MS. Fraction L of methanol extract of C. sinensis (MES) and fraction 5 of acetone extract of C. assamica (AEA) were found very effective against selected pathogenic strains. GC–MS analysis of this fraction showed the presence of n-heptadecanol-1 (68.63%) in MES and 2′,6′dihydroxyacetophenone, bis(trimethylsilyl) (17.58%) in AEA with the highest area. The compounds n-heptadecanol-1 and 2′,6′dihydroxyacetophenone, bis(trimethylsilyl) ether were used for docking to analyse its therapeutic potential. The ligand compound n-heptadecanol-1 (HEP) from MES of C. sinensis and 2′,6′dihydroxyacetophenone, bis(trimethylsilyl) ether from AEA of C. assamica were docked with the target protein dihydropteoate synthase (DHPS) active sites of Escherichia coli and Staphylococcus aureus active sites via Auto Dock Vina, thereby forecasting the finest binding position of ligands. AutoDock Vina docked results revealed the involvement of binding energy for the establishment of the protein–ligand structure complex, besides generating an interpretation of all apparent molecular interactions accountable for its activity. Further, the protein–ligand complex of MES, EcDHPS + HEP and SaDHPS + HEP exhibiting the best binding affinity were − 4.8 kcal/mol and − 3.6 kcal/mol. The protein–ligand complex of AEA, i.e., EcDHPS + DHA and SaDHPS + DHA exhibited the best binding affinity of − 4.8 kcal/mol and − 4.8 kcal/mol.

The polymerization of 1-trimethylsilyl-1-propyne mediated by catalytic systems based on Nb and Ta pentafluorides is carried out. Using solid-state 13С NMR spectroscopy, it is shown that the catalysts based on group V metal fluorides possess a well-defined trans-stereoregulating ability and produce trans-enriched polymers compared with analogous samples synthesized using Nb and Ta chlorides and bromides since they have a smaller ligand at the active center of the growing chain. A high trans-stereoregularity of poly(1-trimethylsilyl-1-propyne) is responsible for its insolubility in organic solvents. As evidenced by low-temperature argon sorption, all the synthesized polymers have high BET specific surface area (above 600 m2/g) and micropore volume (above 0.30–0.45 cm3/g). In combination with resistance against organic compounds, this makes them attractive materials for use as fillers of composite membranes and sorbents for the sorption of gases and vapors of organic compounds from streams of commercial mixtures of various composition.

The direct synthesis of 1,1′,2,2′-tetralithioferrocene from1,1,2,2tetrabromoferrocene is reported. In addition, the related 1,1′,2,2′,3,3′-hexalithioferrocene is also described, prepared directly from 1,1′,2,2′,3,3′-hexabromoferrocene. These lithioferrocenes may be isolated as orange red (tetralithio) and red (hexalithio) powders, respectively. When these are prepared in situ and reacted with chlorotrimethylsilane, the corresponding 1,1′,2,2-tetrakis(trimethylsilyl)ferrocene and 1,1′,2,2′,3,3′′-hexakis(trimethylsilyl)ferrocene are obtained as red and crimson crystalline solids, respectively. The single-crystal structures of 1,1′,2,2′-tetrakis(trimethylsilyl)ferrocene (11) and 1,1′,2,2,3,3′-hexakis(trimethylsilyl)ferrocene (12) have been determined and are described.

In order to investigate benchtop NMR spectroscopy as a monitoring tool for fermentation processes, we used a barley malt mash and took various samples over time and analysed them by NMR spectroscopy with 3-(trimethylsilyl)-2,2,3,3-tetradeuteropropionic acid sodium salt (TSP-d4) as an internal standard for the quantification of ethanol and validated the results by two different enzymatic standard test kits for ethanol analysis. We could show that the results between NMR spectroscopy and test kits were consistent with NMR having a much lower standard deviation. Finally, we discussed the applicability of the method as well as the possibility to quantify various other substances.

The design of new redox-switchable molecules requires the development of simple and efficient synthetic approaches. This study demonstrates the possibility of ortho-lithiation of ferrocenecarboxaldehyde (aryl)imines (Ia–Ic) followed by the reaction with ketones to give 1,2-disubstituted ferrocenes (IIa–IIc). These products, in turn, can be cyclized by treatment with trimethylsilyl triflate to give the cationic precursors of ferrocene-containing N-heterocyclic carbenes (IIIa–IIIc), in which the heterocycle is annulated to one of the ferrocene cyclopentadienyl ring. Treatment of IIIa–IIIc with a base in the presence of a source of rhodium afforded rhodium carbene complexes (IVa, IVb) in which the carbene ligand resembled cyclic alkylaminocarbenes in the electron-donor properties. Compounds Ib and IVa were studied by X-ray diffraction (CIF file CCDC nos. 2000413 and 2000414, respectively).

Sulfur dichloride reacts with (trimethylsilyl)acetylene to form stereoselectively E, E-bis-(2-chloro-2-trimethylsilylvinyl) sulfide and isomeric E-2-chloro-2-trimethylsilylvinyl E-2-chloro-1-trimethylsilylvinyl sulfide. Desilylation of these compounds provides an individual E, E-bis-(2-chlorovinyl) sulfide.

3-Aryloxindole derivatives were synthesized through a Friedel–Crafts-type cyclization. The reaction was catalyzed by a trimethylsilyl tricyanopalladate complex generated in situ from trimethylsilyl cyanide and Pd(OAc)2. Wide varieties of diethyl phosphates derived from N-arylmandelamides were converted almost quantitatively into oxindoles. When N,N-dibenzylamide was used instead of an anilide substrate, a benzo-fused δ-lactam was obtained. An oxindole product was subjected to substitution reactions to afford 3,3-diaryloxindoles with two different aryl groups.

Two new platinum(II) compounds with trans-(NHC)2Pt(C≡C–C≡C–R)2 (where NHC = N-heterocyclic carbene and R = phenyl or trimethylsilyl) architecture exhibit sharp blue-green or saturated deep-blue pho...

The trimethylsilyl (TMS) group is widely used in carbo­hydrate synthesis, although this protecting group is unstable and its post-synthetic purification challenging. The successful trimethylsilyl­ation of carbohydrates mediated by recyclable and efficient acidic catalyst PTA/HMDS and the novel reagent, TMSOAc (TEA/TMSOAc), under alkaline condition is reported. The advantages of these methods are that the reactions proceed in good to excellent yields without applying column chromatography for purification.

Trimethylsilyl (TMS) groups present outstanding NMR probes of biological macromolecules as they produce intense singlets in 1H NMR spectra near 0 ppm, where few other proton resonances occur. We report a system for genetic encoding of N6-(((trimethylsilyl)methoxy)carbonyl)-l-lysine (TMSK) for site-specific incorporation into proteins. The system is based on pyrrolysyl-tRNA synthetase mutants, which deliver proteins with high yield and purity in vivo and in cell-free protein synthesis. As the TMS signal can readily be identified in 1D 1H NMR spectra of high-molecular weight systems without the need of isotopic labeling, TMSK delivers an excellent site-specific NMR probe for the study of protein structure and function, which is both inexpensive and convenient. We demonstrate the utility of TMSK to detect ligand binding, measure the rate of conformational change, and assess protein dimerization by paramagnetic relaxation enhancement. In addition, we present a system for dual incorporation of two different unnatural amino acids (TMSK and O-tert-butyl-tyrosine) in the same protein in quantities sufficient for NMR spectroscopy. Close proximity of the TMS and tert-butyl groups was readily detected by nuclear Overhauser effects.

A D-xylose anhydro sugar derivative (1) has been applied in the ring-opening copolymerisation (ROCOP) with CS2 to form a polythiocarbonate (poly(CS2-co-1)) with high head-head/tail-tail regioselectivity towards alternating thiono- and trithiocarbonate linkages (up to 95%). Through variation of the reaction parameters (e.g. temperature and CS2 stoichiometry), some control over the regioselectivity (head-head/tail-tail linkages 57–95%) and the nature of the polymer linkages is possible. Conditions can also be tailored to enable the facile isolation of a polymerisable cyclic xanthate, 2. Kinetic experiments suggest that across the range of temperatures studied, the formation of poly(CS2-co-1) proceeds at least partially by direct copolymerisation of 1 and CS2, without necessarily going through the ring-opening polymerisation (ROP) of 2. Poly(CS2-co-1) exhibits partial chemical recyclability into cyclic monomer 2 (up to 45% after 20 h at 110 °C with [poly(CS2-co-1)]0 = 1.34 mol L−L). Finally, rapid degradation (