Search

The Ruddlesden–Popper (RP) layered perovskite structure is of great interest due to its inherent tunability, and the emergence and growth of the compositionally complex oxide (CCO) concept endows the RP family with further possibilities. Here, a comprehensive assessment of thermodynamic stabilization, local order/disorder, and lattice distortion was performed in the first two reported examples of lanthanum-deficient Lan+1BnO3n+1 (n = 1, B = Mg, Co, Ni, Cu, Zn) obtained via various processing conditions. Chemical short-range order (CSRO) at the B-site and the controllable excess interstitial oxygen (δ) in RP-CCOs are uncovered by neutron pair distribution function analysis. Reverse Monte Carlo analysis of the data, Metropolis Monte Carlo simulations, and extended x-ray absorption fine structure analysis implies a modest degree of magnetic element segregation on the local scale. Further, ab initio molecular dynamics simulations results obtained from special quasirandom structure disagree with experimentally observed CSRO but confirm Jahn–Teller distortion of CuO6 octahedra. These findings highlight potential opportunities to control local order/disorder and excess interstitial oxygen in layered RP-CCOs and demonstrate a high degree of freedom for tailoring application-specific properties. They also suggest a need for expansion of theoretical and data modeling approaches in order to meet the innate challenges of CCO and related high-entropy phases.

High entropy ceramics provide enhanced flexibility for tailoring a wide range of physical properties, emerging from the diverse chemical and configurational degrees of freedom. Expanding upon the endeavors of recently synthesized high entropy ceramics in rock salt, fluorite, spinel and perovskite structures, we explore the relative feasibility of formation of high entropy pyrochlore oxides, A2B2O7, with multi-cation occupancy of the B-site, estimated from first principles based thermodynamic descriptors. Subsequently, we used Monte Carlo simulations to estimate the phase composition, oxygen vacancy concentration and local ionic segregation as a function of temperature and oxygen partial pressure. In parallel, we have investigated the synthesis of several multicomponent oxides with a pyrochlore composition, related to our computational investigations, resulting in several high purity pyrochlore oxides, in some cases with minor impurity phases. Ultimately, our approach allows us to evaluate potential impurity phases, ionic disorder and oxygen vacancy concentration in response to the experimental variables, thereby making realistic predictions that can direct and accelerate experimental synthesis of novel multicomponent ceramics.

The performance of single-ion conductors is highly sensitive to the material's defect chemistry. Tuning these defects is limited for solid-state reactions as they occur at particle-particle interfaces, which provide a complex evolving energy landscape for atomic rearrangement and product formation. In this report, we investigate the (1) order of addition and (2) lithium precursor decomposition temperature and their effect on the synthesis and grain boundary conductivity of the perovskite lithium lanthanum titanium oxide (LLTO). We use an intimately mixed sol-gel, a solid-state reaction of Li precursor + La2O3 + TiO2, and Li precursor + amorphous La0.57TiOx as different chemical routes to change the way in which the elements are brought together. The results show that the perovskite can accommodate a wide range of Li deficiencies (upward of 50%) while maintaining the tetragonal LLTO structure, indicating that X-ray diffraction (XRD) is insufficient to fully characterize the chemical nature of the product (i.e., Li-deficient LLTO may behave differently than stoichiometric LLTO). Variations in the relative intensities of different reflections in XRD suggest variations in the La ordering within the crystal structure between synthesis methods. Furthermore, the choice of the precursor and the order of addition of the reactants lower the time required to form a pure phase. Density functional theory calculations of the formation energy of possible reaction intermediates support the hypothesis that a greater thermodynamic driving force to form LLTO leads to a greater LLTO yield. The retention of lithium is correlated with the thermal decomposition temperature of the Li precursor and the starting material mixing strategy. Taking the results together suggests that cations that share a site with Li should be mixed early to avoid ordering. Such cation ordering inhibits Li motion, leading to higher Li ion resistance.

The mercury dihalides show a remarkable diversity in the structural preferences in their minimum energy structure types, spanning molecular to strongly bound ionic solids. A challenge in the development of density functional methods for extended systems is to arrive at strategies that serve equally well such a broad range of bonding modes or structural preferences. The chemical bonding and the stabilities of mercury dihalides and the general utility and reliability of the van der Waals density functional with C09 exchange (vdW-DF-C09) in predicting or describing the energetics and structural preferences in these metal dihalides is examined. We show that, in contrast with the uncorrected generalized gradient approximation of the Perdew-Burke-Erzenhoff (PBE) exchange-correlation functional, qualitative and quantitative patterns in the bonding of the mercury dihalide solids are well reproduced with vdW-DF-C09 for the full series of HgX2 systems for X = F, Cl, Br, and I. The possible existence of a low-temperature cotunnite polymorph for HgF2 and PbF2 is posited.

The van der Waals interaction is of foundational importance for a wide variety of physical systems. In particular, van der Waals forces lie at the heart of potential device technologies that may be realized from the functional organization of layered two-dimensional (2D) nanomaterials. For intermediate to large-scale applications modeling, van der Waals density functionals have become the de facto choice for first-principles calculations. In particular, the vdW-DF family of functionals have provided a systematic approach to this theoretically challenging problem. While much progress has been made, there remains room for improvement in the microscopic description of vdW forces from these density functionals. In this work, we compute benchmark results for the binding energy and the electronic density response to binding in TiS2 via accurate diffusion quantum Monte Carlo calculations. We compare these benchmark data to results obtained from local, semilocal, and van der Waals functionals. In particular, we gauge the quality of the original vdW-DF/vdW-DF2 functionals, as well as updated variants such as vdW-DF-C09, vdW-DF-optB88, vdW-DF-optB86b, and vdW-DF2-B86R. We find a close relationship between the accuracy of predicted interlayer separation distances and binding energies for TiS2, with the vdW-DF-optB88 functional performing very well in terms of both quantities. In general, the more recently developed functionals are systematic improvements over older ones. However, when considering the response of the electron density to binding, we find that local-density approximation (LDA) and PBEsol generally outperform the vdW-DF functionals in describing the interlayer charge accumulation with vdW-DF-C09 variants performing the best overall.

A generic method to estimate the relative feasibility of formation of high-entropy compounds in a single phase, directly from first principles, is developed. As a first step, the relative formation...

Description, Dynamic crosslinking of commodity thermoplastics with multiple interfaces enables remarkably tough reversible adhesion., Tough adhesives provide resistance against high debonding forces, and these adhesives are difficult to design because of the simultaneous requirement of strength and ductility. Here, we report a design of tough reversible/recyclable adhesive materials enabled by incorporating dynamic covalent bonds of boronic ester into commodity triblock thermoplastic elastomers that reversibly bind with various fillers and substrates. The spectroscopic measurements and density functional theory calculations unveil versatile dynamic covalent binding of boronic ester with various hydroxy-terminated surfaces such as silica nanoparticles, aluminum, steel, and glass. The designed multiphase material exhibits exceptionally high adhesion strength and work of debonding with a rebonding capability, as well as outstanding mechanical, thermal, and chemical resistance properties. Bonding and debonding at the interfaces dictate hybrid material properties, and this revelation of tailored dynamic interactions with multiple interfaces will open up a new design of adhesives and hybrid materials.

The performance of single-ion conductors is highly sensitive to the material's defect chemistry. Tuning these defects is limited for solid-state reactions as they occur at particle-particle interfaces, which provide a complex evolving energy landscape for atomic rearrangement and product formation. In this report, we investigate the (1) order of addition and (2) lithium precursor decomposition temperature and their effect on the synthesis and grain boundary conductivity of the perovskite lithium lanthanum titanium oxide (LLTO). We use an intimately mixed sol-gel, a solid-state reaction of Li precursor + La

${\mathrm{CrI}}_{3}$ has recently been shown to exhibit low-dimensional, long-range magnetic ordering from few layers to single layers of ${\mathrm{CrI}}_{3}$. The properties of ${\mathrm{CrI}}_{3}$ bulk and few-layered systems are uniquely defined by a combination of short-range intralayer and long-range interlayer interactions, including strong correlations, exchange, and spin-orbit coupling. Unfortunately, both the long-range van der Waals interactions, which are driven by dynamic, many-body electronic correlations, and the competing strong intralayer correlations, present a formidable challenge for the local or semilocal mean-field approximations employed in workhorse electronic structure approaches like density-functional theory. In this paper we employ a sophisticated many-body approach that can simultaneously describe long- and short-range correlations. We establish that the fixed-node diffusion Monte Carlo (FNDMC) method reproduces the experimental interlayer separation distance of bulk ${\mathrm{CrI}}_{3}$ for the high-temperature monoclinic phase with a reliable prediction of the interlayer binding energy. We subsequently employed the FNDMC results to benchmark the accuracy of several density-functional theory exchange-correlation approximations.

High-throughput first-principles calculations are performed on ABO3 perovskites for new thermal barrier coating (TBC) materials. We present systematic investigations comprised of multiple selection criteria to achieve the prediction of target materials. A database including mechanical/thermal properties of 190 perovskites is initially established. Six perovskites are proposed as novel TBC materials with predicted thermal conductivities under 1.25 W/(m·K) and good damage tolerance. The observed anisotropy of thermal conductivity provides possibilities for the performance controlling via the growth orientation design. The adopted strategy and established database are expected to inspire the design of ABO3-based TBC materials and future structural material investigations.

The slow kinetics of the oxygen evolution (OER) and oxygen reduction (ORR) reactions hamper the development of renewable energy storage and conversion technologies. Transition-metal oxides (TMOs) are cost-effective replacements to conventional noble metal catalysts for driving these electrochemical systems. Strain is known to greatly affect the electronic structure of TMO surfaces, leading to significant changes in their electrocatalytic activities. In this study, we explore the influence of strain on the OER and ORR mechanisms on the LaNiO3(001) surface using density functional theory (DFT). Through a comparison of the overpotential and the largest change in Gibbs free energy (ΔG) in the reaction pathway, we determined that the OER activity on the LaNiO3 surface is directly related to the desorption of –H from the surface, which can be tuned as a function of strain. Moreover, tensile strain shuts off the reaction pathway to forming the –O2H intermediate state, due to the dissociation of –O2H into –O2 and –H. This is largely a consequence of the strong binding of H to the surface O, leading to a significant increase in the largest ΔG for the ORR on the tensile-strained surfaces by promoting an alternative reaction pathway. Overall, our results show that tensile strain on LaNiO3(001) leads to a decrease in both OER and ORR activities. Interestingly, in both cases, we find that the reaction is driven by the interactions with surface O ions, thus calling for a reinterpretation of the role that Ni eg orbital polarization plays in defining the OER and ORR catalytic activity on the TMO surfaces. Here, it is an indirect measure of changes in Ni–O hybridization, which controls the binding of –H species to the surface. As such, these results highlight the importance of surface O ions; particularly as it relates to defining molecule–surface interactions that ultimately tune and enhance the electrocatalytic efficiency of perovskite materials through the modulation of strains.

Understanding band alignment and charge transfer at complex oxide interfaces is critical to tailoring and utilizing their diverse functionality. Towards this goal, we design and experimentally validate both Ohmic- and Schottky-like charge transfers at oxide/oxide semiconductor/metal interfaces. We utilize a method for predicting band alignment and charge transfer in ABO3 perovskites, where previously established rules for simple semiconductors fail. The prototypical systems chosen are the rare class of oxide metals, SrBO3 with B=V-Ta, when interfaced with the multifaceted semiconducting oxide, SrTiO3. For B=Nb and Ta, we confirm that a large accumulation of charge occurs in SrTiO3 due to higher energy Nb and Ta d-states relative to Ti; this gives rise to a high mobility metallic interface, which is an ideal epitaxial oxide/oxide Ohmic contact. On the other hand, for B=V, there is no charge transfer into the SrTiO3 interface, which serves as a highly conductive epitaxial gate metal. Going beyond these specific cases, this work opens the door to integrating the vast phenomena of ABO3 perovskites into a wide range of practical devices., Comment: Accepted in Small Science

High-entropy oxides (HEOs) have attracted great interest in diverse fields because of their inherent opportunities to tailor and combine materials functionalities. The control of local order/disorder in the class is by extension a grand challenge toward realizing their vast potential. Here we report the first examples of pyrochlore HEOs with five M-site cations, for Nd2M2O7, in which the local structure has been investigated by neutron diffraction and pair distribution function (PDF) analysis. The average structure of the pyrochlores is found to be orthorhombic Imma, in agreement with radius-ratio rules governing the structural archetype. The computed PDFs from density functional theory relaxed special quasirandom structure models are compared with real space PDFs in this work to evaluate M-site order/disorder. Reverse Monte Carlo combined with ab initio molecular dynamics and Metropolis Monte Carlo simulations demonstrates that Nd2(Ta0.2Sc0.2Sn0.2Hf0.2Zr0.2)2O7 is synthesized with its M-site local to nanoscale order highly randomized/disordered, while Nd2(Ti0.2Nb0.2Sn0.2Hf0.2Zr0.2)2O7+x exhibits a strong distortion of the TiO6 octahedron and small degree of Ti chemical short-range order (SRO) on the subnanometer scale. Calculations suggest that this may be intrinsic, energetically favored SRO rather than due to sample processing. These results offer an important demonstration that the engineered variation of participating ions in HEOs, even among those with very similar radii, provides richly diverse opportunities to control local order/disorder motifs-and therefore materials properties for future designs. This work also hints at the exquisite level of detail that may be needed in computational and experimental data analysis to guide structure-property tuning in the emerging HEO materials class.

The van der Waals interaction is of foundational importance for a wide variety of physical systems. In particular, van der Waals forces lie at the heart of potential device technologies that may be realized from the functional organization of layered two-dimensional (2D) nanomaterials. For intermediate to large-scale applications modeling, van der Waals density functionals have become the

Perpustakaan merupakan bagian dari fasilitas pendidikan untuk menunjang kemajuan pendidikan yang memberikan sebuah informasi dan ilmu pengetahuan kepada peserta didik sehingga para peserta didik memiliki wawasan yang luas. Sistem perpustakaan di Universitas Wijaya Kusuma Surabaya ini masih menggunakan cara yang manual dalam setiap kegiatannya sehingga dalam kegiatan pengarsipan sering terjadi kesalahan dan sering terjadi kehilangan data karena penyimpanan data yang tidak teratur dan tidak adanya backup data. Oleh karena itu proyek akhir ini bertujuan untuk memberikan informasi dan meningkatkan kualitas di perpustakaan Universitas Wijaya Kusuma Surabaya dengan memfasilitasi data warehouse, sehingga dapat mendukung dan membantu pelayanan di perpustakaan Universitas Wijaya Kusuma.

The magnetic van der Waals materials with the highest ordering temperatures are generally metallic ferromagnets, such as Fe${}_{5}$GeTe${}_{2}$ with a Curie temperature near 300 K. In this work, the authors have demonstrated an ability to produce an antiferromagnetic state with an enhanced critical temperature by substituting cobalt for iron. While such a change to the magnetism is not uncommon, the important finding here is that the change in magnetic order is coupled not just to the chemical modification but also to a change in layer stacking that is induced by the cobalt substitution.

Designing and understanding functional electronic and magnetic properties in perovskite oxides requires controlling and tuning the underlying crystal lattice. Here we report the structure, including oxygen and cation positions, of a single-crystal, entropy stabilized perovskite oxide film of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 grown on SrTiO3 (001). The parent materials range from orthorhombic (LaCrO3, LaMnO3 and LaFeO3) to rhombohedral (LaCoO3 and LaNiO3), and first principles calculations indicate that these structural motifs are nearly degenerate in energy and should be highly distorted site-to-site. Despite this extraordinary local configurational disorder on the B-site sublattice, we find a structure with unexpected macroscopic crystalline homogeneity with a clear orthorhombic unit cell, whose orientation is demonstrated to be controlled by the strain and crystal structure of the substrate for films grown on (La0.3Sr0.7)(Al0.65Ta0.35)O3 (LSAT) and NdGaO3 (110). Furthermore, quantification of the atom positions within the unit cell reveal that the orthorhombic distortions are small, close to LaCrO3, which may be driven by a combination of disorder averaging and the average ionic radii. This is the first step towards understanding the rules for designing new crystal motifs and tuning functional properties through controlled configurational complexity., Comment: To appear in Physical Review Materials

Fe5-xGeTe2 is a van der Waals material with one of the highest reported bulk Curie temperatures, $T_C$ ~ 310K. In this study, theoretical calculations and experiments are utilized to demonstrate that the magnetic ground state is highly sensitive to local atomic arrangements and the interlayer stacking. Cobalt substitution is found to be an effective way to manipulate the magnetic properties while also increasing the ordering temperature. In particular, cobalt substitution up to 30% enhances $T_C$ and changes the magnetic anisotropy, while approximately 50% cobalt substitution yields an antiferromagnetic state. Single crystal x-ray diffraction evidences a structural change upon increasing the cobalt concentration, with a rhombohedral cell observed in the parent material and a primitive cell observed for ~46% cobalt content relative to iron. First principles calculations demonstrate that it is a combination of high cobalt content and the concomitant change to primitive layer stacking that produces antiferromagnetic order. These results illustrate the sensitivity of magnetism in Fe5-xGeTe2 to composition and structure, and emphasize the important role of structural order/disorder and layer stacking in cleavable magnetic materials., Comment: This paper is a contribution to the joint Physical Review Applied and Physical Review Materials collection titled Two-Dimensional Materials and Devices

The Oak–Ridge Wang–Landau (OWL) package is an open-source scientific software specialized for large-scale, Monte Carlo simulations for the study of materials properties at finite temperature. In this paper, we discuss the main features and capabilities of OWL, followed by detailed descriptions of building and running the code. The readers will be guided through the usage and functionality of the code with a few hands-on examples. This paper is based on a tutorial on OWL given at the 32nd Center for Simulational Physics Workshop on Recent Developments in Computer Simulation Studies in Condensed Matter Physics.

Atomically disordered oxides have attracted significant attention in recent years due to the possibility of enhanced ionic conductivity. However, the correlation between atomic disorder, corresponding electronic structure, and the resulting oxygen diffusivity is not well understood. The disordered variants of the ordered pyrochlore structure in gadolinium titanate (Gd2Ti2O7) are seen as a particularly interesting prospect due to intrinsic presence of a vacant oxygen site in the unit atomic structure, which could provide a channel for fast oxygen conduction. In the present work, we provide insights into the subangstrom scale on the disordering-induced variations in the local atomic environment and its effect on the electronic structure in high-energy ion irradiation-induced disordered nanochannels, which can be utilized as pathways for fast oxygen ion transport. With the help of an atomic plane-by-plane-resolved analyses, the work shows how the presence of various types of TiOx polyhedral that exist in the...

The sensitive dependence of monolayer materials on their environment often gives rise to unexpected properties. It was recently demonstrated that monolayer FeSe on a ${\mathrm{SrTiO}}_{3}$ substrate exhibits a much higher superconducting critical temperature ${T}_{c}$ than the bulk material. Here, we examine the interfacial structure of FeSe/${\mathrm{SrTiO}}_{3}$ and the effect of an interfacial ${\mathrm{Ti}}_{1+x}{\mathrm{O}}_{2}$ layer on the increased ${T}_{c}$ using a combination of scanning transmission electron microscopy and density functional theory. We find ${\mathrm{Ti}}_{1+x}{\mathrm{O}}_{2}$ forms its own quasi-two-dimensional layer, bonding to both the substrate and the FeSe film by van der Waals interactions. The excess Ti in this layer can reconstruct the FeSe Fermi surface in a manner consistent with experimental observations. Moreover, the interfacial layer introduces symmetry-breaking distortions in the FeSe film that may favor a ${T}_{c}$ increase. These results suggest that this common substrate may be functionalized to modify the electronic structure of a variety of thin films and monolayers.

The impact of single-axis lattice expansion on the optical response of $\mathrm{BiFe}{\mathrm{O}}_{3}$ films is examined. Low-energy He implantation is used to tailor morphotropic phases of $\mathrm{BiFe}{\mathrm{O}}_{3}$ films and study changes in their optical spectra with continuously increasing lattice expansion. He ion implantation of epitaxial rhombohedral (R)- and tetragonal (T)-like $\mathrm{BiFe}{\mathrm{O}}_{3}$ films induces uniaxial out-of-plane strain that, on R-like films, eventually leads to a complete R-T phase transition. This approach allows us to provide insights into the optical response of $\mathrm{BiFe}{\mathrm{O}}_{3}$ films. Strain doping of T-like films leads to a significant redshift of the optical absorption spectra that is theoretically explained by a lowering of Fe $3d\phantom{\rule{0.28em}{0ex}}{t}_{2g}$ states. R-like films, on the other hand, show a less-pronounced sensitivity to uniaxial strain and a blueshift of about 250 meV at the strain-induced R-T transition. The results demonstrate that strain doping allows a deeper examination of the optical properties of epitaxial phases that are otherwise impossible to access by standard epitaxy.

Control over the concurrent occurrence of structural (monoclinic to tetragonal) and electrical (insulator to the conductor) transitions presents a formidable challenge for VO2-based thin film devices. Speed, lifetime, and reliability of these devices can be significantly improved by utilizing solely electrical transition while eliminating structural transition. We design a novel strain-stabilized isostructural VO2 epitaxial thin-film system where the electrical transition occurs without any observable structural transition. The thin-film heterostructures with a completely relaxed NiO buffer layer have been synthesized allowing complete control over strains in VO2 films. The strain trapping in VO2 thin films occurs below a critical thickness by arresting the formation of misfit dislocations. We discover the structural pinning of the monoclinic phase in (10 ± 1 nm) epitaxial VO2 films due to bandgap changes throughout the whole temperature regime as the insulator-to-metal transition occurs. Using density functional theory, we calculate that the strain in monoclinic structure reduces the difference between long and short V-V bond-lengths (ΔV−V) in monoclinic structures which leads to a systematic decrease in the electronic bandgap of VO2. This decrease in bandgap is additionally attributed to ferromagnetic ordering in the monoclinic phase to facilitate a Mott insulator without going through the structural transition.

Epitaxial thin films of CuMnAs have recently attracted attention due to their potential to host relativistic antiferromagnetic spintronics and exotic topological physics. Here, we report on the structural and electronic properties of a tetragonal CuMnAs thin film studied using scanning tunneling microscopy (STM) and density functional theory (DFT). STM reveals a surface terminated by As atoms, with the expected semi-metallic behavior. An unexpected zigzag step edge surface reconstruction is observed with emerging electronic states below the Fermi energy. DFT calculations indicate that the step edge reconstruction can be attributed to an As deficiency that results in changes in the density of states of the remaining As atoms at the step edge. This understanding of the surface structure and step edges on the CuMnAs thin film will enable in-depth studies of its topological properties and magnetism.

Multiferroic materials have driven significant research interest due to their promising technological potential. Developing new room-temperature multiferroics and understanding their fundamental properties are important to reveal unanticipated physical phenomena and potential applications. Here, a new room temperature multiferroic nanocomposite comprised of an ordered ferrimagnetic spinel LiFe5O8 (LFO) and a ferroelectric perovskite BiFeO3 (BFO) is presented. We observed that lithium (Li)-doping in BFO favors the formation of LFO spinel as a secondary phase during the synthesis of LixBi1-xFeO3 nanoceramics. Multimodal functional and chemical imaging methods are used to map the relationship between doping-induced phase separation and local ferroic properties in both the BFO-LFO composite ceramics and self-assembled nanocomposite thin films. The energetics of phase separation in Li doped BFO and the formation of BFO-LFO composites is supported by first principles calculations. These findings shed light on Li-ion role in the formation of a functionally important room temperature multiferroic and open a new approach in the synthesis of light element doped nanocomposites.

Symmetry and dimensionality are essential factors defining lattice dynamics and conductivity (\ensuremath{\kappa}). Here, we critically examine these via ab initio Boltzmann transport applied to single chain and bulk electride $\mathrm{B}{\mathrm{a}}_{3}\mathrm{N}$ and $\mathrm{B}{\mathrm{a}}_{3}\mathrm{N}X$ ($X=\mathrm{Sb}$,Bi). Chiral phonons in one-dimensional chains obey new symmetry-based scattering rules that limit thermal resistance. Weak chain coupling breaks these in the bulk, giving lower \ensuremath{\kappa} and large \ensuremath{\kappa} anisotropy. Curiously, intercalation of large X atoms binds chains more strongly, reducing the volume, yet gives lower \ensuremath{\kappa} and transforms the electronic behavior. Insights developed here can be more generally applied to other materials and provide avenues for predictive materials design.

Point defects and their diffusion contribute significantly to the properties of perovskite materials. However, even for the prototypical case of oxygen vacancies in SrTiO 3 (STO), the predictions of oxygen vacancy activity vary widely. Here we present a comprehensive and systematic study of the diffusion barriers in bulk STO. Using density functional theory (DFT), we assess the role of different supercell sizes, density functionals, and charge states. Our results show that vacancy-induced octahedral rotations, which are limited by the boundary conditions of the supercell, can significantly affect the computed oxygen vacancy diffusion energy barrier. In addition, we find that the diffusion energy barrier of a charged oxygen vacancy is lower than that of a neutral one. This difference is magnified in small supercells. We demonstrate that with increasing supercell size, the effects of the oxygen vacancy charge state and the type of DFT exchange and correlation functional diminish, and all DFT predicted migration energy barriers asymptote to a range of 0.39–0.49 eV, which is smaller than the reported experimental values. This work provides important insights and guidance that should be considered for investigations of point defect diffusion in perovskite materials and in oxide superlattices.

MnBi2Te4 and MnBi4Te7 are intrinsic antiferromagnetic topological insulators, offering a promising materials platform for realizing exotic topological quantum states. However, high densities of intrinsic defects in these materials not only cause bulk metallic conductivity, preventing the measurement of quantum transport in surface states, but may also affect magnetism and topological properties. In this paper, we show by density functional theory calculations that the strain induced by the internal heterostructure promotes the formation of large-size-mismatched antisite defect BiMn in MnBi2Te4; such strain is further enhanced in MnBi4Te7, giving rise to even higher BiMn density. The abundance of intrinsic BiMn donors results in degenerate n-type conductivity under the Te-poor growth condition. Our calculations suggest that growths in a Te-rich condition can lower the Fermi level, which is supported by our transport measurements. We further show that the internal strain can also enable efficient doping by large-size-mismatched substitutional NaMn acceptors, which can compensate BiMn donors and lower the Fermi level. Na doping may pin the Fermi level inside the bulk band gap even at the Te-poor limit in MnBi2Te4. Furthermore, facile defect formation in MnSb2Te4 and its implication in Sb doping in MnBi2Te4 as well as the defect segregation in MnBi4Te7 are discussed. The defect engineering and doping strategies proposed in this paper will stimulate further studies for improving synthesis and for manipulating magnetic and topological properties in MnBi2Te4, MnBi4Te7, and related compounds.

In this paper, we study the elastic properties of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O using experimental and first principles techniques. Our measurements of the indentation modulus on grains with a wide range of crystallographic orientations of the entropy-stabilized oxide revealed a high degree of elastic isotropy at ambient conditions. First principles calculations predict mild elastic anisotropy for the paramagnetic structure, which decreases when the system is considered to be non-magnetic. When the antiferromagnetic state of CoO, CuO, and NiO is accounted for in the calculations, a slight increase in elastic anisotropy is observed, suggesting a coupling between magnetic ordering and the orientation dependent elastic properties. Furthermore, an examination of the local structure reveals that the isotropy is favored through local ionic distortions of Cu and Zn—due to their tendencies to form tenorite and wurtzite phases. The relationships between the elastic properties of the multicomponent oxide and those of its constituent binary oxides are reviewed. These insights open up new avenues for controlling isotropy for technological applications through tuning composition and structure in the entropy-stabilized oxide or the high-entropy compounds in general.

The unique functionalities present at surfaces and interfaces of complex oxides have attracted intense research in the past decade. Yet, the fundamental mechanisms underpinning functionality are often elusive, especially in doped manganites, limiting their implementation in functional electronic devices such as memristors and spin valves. Here, we present a local probe-based study on mixed-terminated $\mathrm{L}{\mathrm{a}}_{5/8}\mathrm{C}{\mathrm{a}}_{3/8}\mathrm{Mn}{\mathrm{O}}_{3}$ (LCMO) films, and reveal surface metallicity in a thin film grown by pulsed-laser deposition. Using first-principles density-functional theory calculations with Hubbard correction that are more accurate to capture effects of correlation in these systems, we show that for Ca-segregated (001) LCMO surfaces the (La,Ca)O-site terminated surfaces are half metallic due to delocalized Mn-$d$ states populating the Fermi level, whereas the ${\mathrm{MnO}}_{2}$-site terminated surfaces exhibit a half-metallic or insulating character depending on the type of surface reconstruction. Computations not only explain the current measurements, but also explain other recent surface measurements on LCMO thin films, leading to a coherent picture of how the crucial link between surface segregation and Jahn-Teller couplings in the manganese oxides tune the surface electronic/magnetic structure, thereby pointing to the fine control of transport and magnetism at the conductive oxide surface independent of the bulk.

The slow kinetics of the oxygen evolution (OER) and oxygen reduction (ORR) reactions hamper the development of renewable energy storage and conversion technologies. Transition-metal oxides (TMOs) are cost-effective replacements to conventional noble metal catalysts for driving these electrochemical systems. Strain is known to greatly affect the electronic structure of TMO surfaces, leading to significant changes in their electrocatalytic activities. In this study, we explore the influence of strain on the OER and ORR mechanisms on the LaNiO3(001) surface using density functional theory (DFT). Through a comparison of the overpotential and the largest change in Gibbs free energy (ΔG) in the reaction pathway, we determined that the OER activity on the LaNiO3 surface is directly related to the desorption of -H from the surface, which can be tuned as a function of strain. Moreover, tensile strain shuts off the reaction pathway to forming the -O2H intermediate state, due to the dissociation of -O2H into -O2 and -H. This is largely a consequence of the strong binding of H to the surface O, leading to a significant increase in the largest ΔG for the ORR on the tensile-strained surfaces by promoting an alternative reaction pathway. Overall, our results show that tensile strain on LaNiO3(001) leads to a decrease in both OER and ORR activities. Interestingly, in both cases, we find that the reaction is driven by the interactions with surface O ions, thus calling for a reinterpretation of the role that Ni eg orbital polarization plays in defining the OER and ORR catalytic activity on the TMO surfaces. Here, it is an indirect measure of changes in Ni-O hybridization, which controls the binding of -H species to the surface. As such, these results highlight the importance of surface O ions; particularly as it relates to defining molecule-surface interactions that ultimately tune and enhance the electrocatalytic efficiency of perovskite materials through the modulation of strains.

The defect stability in a prototypical perovskite oxide superlattice consisting of ${\mathrm{SrTiO}}_{3}$ and ${\mathrm{PbTiO}}_{3}$ (STO/PTO) is determined by using first principles density functional theory calculations. Specifically, the oxygen vacancy formation energies ${E}_{\mathrm{v}}$ in the paraelectric and ferroelectric phases of a superlattice with four atomic layers of STO and four layers of PTO (4STO/4PTO) are determined and compared. The effects of charge state, octahedral rotation, polarization, and interfaces on ${E}_{\mathrm{v}}$ are examined. The formation energies vary layer by layer in the superlattices, with ${E}_{\mathrm{v}}$ being higher in the ferroelectric phase than that in the paraelectric phase. The two interfaces constructed in these oxide superlattices, which are symmetrically equivalent in the paraelectric systems, exhibit very different formation energies in the ferroelectric superlattices and this can be seen to be driven by the coupling of ferroelectric and rotational modes. At equivalent lattice sites, ${E}_{\mathrm{v}}$ of charged vacancies is generally lower than that of neutral vacancies. Octahedral rotations $({\mathrm{a}}^{0}{\mathrm{a}}^{0}{\mathrm{c}}^{\ensuremath{-}})$ in the superlattices have a significant effect on ${E}_{\mathrm{v}}$, increasing the formation energy of vacancies located near the interface but decreasing the formation energy of the oxygen vacancies located in the bulk-like regions of the STO and PTO constituent parts. The formation-energy variations among different layers are found to be primarily caused by the difference in the local relaxation at each layer. These fundamental insights into the defect stability in perovskite superlattices can be used to tune defect properties by controlling the constituent materials of superlattices and interface engineering.

We used single-crystal x-ray and neutron diffraction to investigate the crystal and magnetic structures of trigonal lattice iridate ${\mathrm{Ca}}_{2}{\mathrm{Sr}}_{2}{\mathrm{IrO}}_{6}$. The crystal structure is determined to be $R\overline{3}$ with two distinct Ir sites. The system exhibits long-range antiferromagnetic order below ${T}_{N}=13.1$ K. The magnetic wave vector is identified as (0,0.5,1) with ferromagnetic coupling along the $a$ axis and antiferromagnetic correlation along the $b$ axis. Spins align dominantly within the basal plane along the [1,2,0] direction and tilt ${34}^{\ensuremath{\circ}}$ toward the $c$ axis. The ordered moment is 0.66(3) ${\ensuremath{\mu}}_{B}$/Ir, larger than other iridates where iridium ions form corner- or edge-sharing ${\mathrm{IrO}}_{6}$ octahedral networks. The tilting angle is reduced to $\ensuremath{\approx}{19}^{\ensuremath{\circ}}$ when a magnetic field of 4.9 T is applied along the $c$ axis. Density functional theory calculations confirm that the experimentally determined magnetic configuration is the most probable ground state with an insulating gap $\ensuremath{\sim}0.5$ eV.

Point defects play a critical role in the structural, physical, and interfacial properties of perovskite oxide superlattices. However, understanding of the fundamental properties of point defects in superlattices, especially their transport properties, is rather limited. Here, we report predictions of the stability and dynamics of oxygen vacancies in $\mathrm{SrTi}{\mathrm{O}}_{3}\text{/}\mathrm{PbTi}{\mathrm{O}}_{3}$ oxide superlattices using first-principles calculations in combination with the kinetic Monte Carlo method. By varying the stacking period, i.e., changing of $n$ in $n\mathrm{STO}\text{/}n\mathrm{PTO}$, we discover a crossover from three-dimensional diffusion to primarily two-dimensional planar diffusion. Such planar diffusion may lead to novel designs of ionic conductors. We show that the dominant vacancy position may vary in the superlattices, depending on the superlattice structure and stacking period, contradicting the common assumption that point defects reside at interfaces. Moreover, we predict a significant increase in room-temperature ionic conductivity for 3STO/3PTO relative to the bulk phases. Considering the variety of cations that can be accommodated in perovskite superlattices and the potential mismatch of spin, charge, and orbitals at the interfaces, this paper identifies a pathway to control defect dynamics for technological applications.

Two-dimensional charge carrier accumulation at oxide heterointerfaces presents a paradigm shift for oxide electronics. Like a capacitor, interfacial charge buildup couples to an electric field across the dielectric medium. To prevent the so-called polar catastrophe, several charge screening mechanisms emerge, including polar distortions and interfacial intermixing which reduce the sharpness of the interface. Here, we examine how atomic intermixing at oxide interfaces affect the balance between polar distortions and electric potential across the dielectric medium. We find that intermixing moves the peak charge distribution away from the oxide/oxide interface; thereby changing the direction of polar distortions away from this boundary with minimal effect on the electric field. This opposing electric field and polar distortions is equivalent to the transient phase transition tipping point observed in double well ferroelectrics; resulting in an anomalous dielectric response -- a possible signature of local negative differential capacitance, with implications for designing dissipationless oxide electronics.

The defect stability in a prototypical perovskite oxide superlattice consisting of SrTiO$_3$ and PbTiO$_3$ (STO/PTO) is determined using first principles density functional theory calculations. Specifically, the oxygen vacancy formation energies E$_v$ in the paraelectric and ferroelectric phases of a superlattice with four atomic layers of STO and four layers of PTO (4STO/4PTO) are determined and compared. The effects of charge state, octahedral rotation, polarization, and interfaces on the E$_v$ are examined. The formation energies vary layer-by-layer in the superlattices, with E$_v$ being higher in the ferroelectric phase than that in the paraelectric phase. The two interfaces constructed in these oxide superlattices, which are symmetrically equivalent in the paraelectric systems, exhibit very different formation energies in the ferroelectric superlattices and this can be seen to be driven by the coupling of ferroelectric and rotational modes. At equivalent lattice sites, E$_v$ of charged vacancies is generally lower than that of neutral vacancies. Octahedral rotations (a$^0$a$^0$c$^-$) in the FE superlattice have a significant effect on the E$_v$, increasing the formation energy of vacancies located near the interface but decreasing the formation energy of the oxygen vacancies located in the bulk-like regions of the STO and PTO constituent parts. The formation energy variations among different layers are found to be primarily caused by the difference in the local relaxation at each layer. These fundamental insights into the defect stability in perovskite superlattices can be used to tune defect properties via controlling the constituent materials of superlattices and interface engineering., Comment: 20 pages, 5 figures, accepted at Physical Review Materials

Ibrutinib, a Bruton's tyrosine kinase inhibitor, has become a standard treatment for patients with chronic lymphocytic leukemia/small lymphocytic lymphoma (CLL/SLL). The present pooled safety analysis of 4 randomized controlled studies demonstrated a favorable benefit/risk profile for ibrutinib in patients with CLL/SLL and mantle cell lymphoma. Background: Multiple studies have demonstrated the efficacy and safety of ibrutinib for chronic lymphocytic leukemia/small lymphocytic lymphoma (CLL/SLL) and mantle cell lymphoma (MCL). This first-in-class inhibitor of Bruton's tyrosine kinase has become a standard treatment for patients with CLL and MCL. Patients and Methods: We conducted an integrated safety analysis to characterize the frequency, severity, natural history, and outcomes of adverse events (AEs) with ibrutinib versus comparators. Data were pooled from 4 completed randomized controlled studies that had included 756 ibrutinib-treated and 749 comparator-treated patients with CLL/SLL or relapsed/refractory MCL. Safety analyses included reporting of AEs using crude and exposure-adjusted incidence rates. Results: The median treatment duration was 13.3 months (maximum, 28.2 months) for ibrutinib and 5.8 months (maximum, 27.3 months) for comparators. When adjusted for exposure, diarrhea, atrial fibrillation, and hypertension were the only common grade >= 3 AEs more often reported with ibrutinib than with the comparators. Dose reductions (7% vs. 14%) and discontinuation (12% vs. 16%) because of AEs occurred less often with ibrutinib, and deaths due to AEs occurred at similar rates (6% vs. 7%). When adjusted for exposure, the corresponding data were all lower with ibrutinib than with the comparators (0.06 vs. 0.22, 0.11 vs. 0.22, and 0.06 vs. 0.09 patient-exposure-years, respectively). The prevalence of common grade 3/4 AEs with ibrutinib generally decreased over time, with the exception of hypertension. Conclusion: These results from an integrated analysis support a favorable benefit/risk profile of ibrutinib in patients with CLL/SLL and MCL. (C) 2018 The Authors. Published by Elsevier Inc.

The isolation of graphene in 2004 from graphite was a defining moment for the "birth" of a field: two-dimensional (2D) materials. In recent years, there has been a rapidly increasing number of papers focusing on non-graphene layered materials, including transition-metal dichalcogenides (TMDs), because of the new properties and applications that emerge upon 2D confinement. Here, we review significant recent advances and important new developments in 2D materials "beyond graphene". We provide insight into the theoretical modeling and understanding of the van der Waals (vdW) forces that hold together the 2D layers in bulk solids, as well as their excitonic properties and growth morphologies. Additionally, we highlight recent breakthroughs in TMD synthesis and characterization and discuss the newest families of 2D materials, including monoelement 2D materials (i.e., silicene, phosphorene, etc.) and transition metal carbide- and carbon nitride-based MXenes. We then discuss the doping and functionalization of 2D materials beyond graphene that enable device applications, followed by advances in electronic, optoelectronic, and magnetic devices and theory. Finally, we provide perspectives on the future of 2D materials beyond graphene.

Li2MnO3 is believed to be a critical component of the high capacity Li-rich–manganese-rich oxide materials; however, the mechanism of its electrochemical activity remains controversial. Here, Raman spectroscopy and mapping are used to follow the chemical and structural changes that occur in Li2MnO3 during electrochemical cycling. Conventional composite electrodes cast from a slurry and thin films are studied as a function of the state of charge (voltage) and cycle number. Thin films have similar electrochemical properties as electrodes prepared from slurries but enable spectroscopy of uniform samples without carbon additives and binder. First-principles density functional theory is used to calculate the phonon spectra and identify the Raman-active modes. On the basis of the calculations of phonon spectra for pristine Li2MnO3 and structures with Li vacancies, we discuss the origin of Raman-active peaks observed during the electrochemical cycling. The spectral changes correlate well with the electrochemical...

In nanocrystalline materials, structural discontinuities at grain boundaries (GBs) and the segregation of point defects to these GBs play a key role in defining the structural stability of a material, as well as its macroscopic electrical/mechanical properties. In this study, the segregation of oxygen vacancies near the Σ3 (1 1 2) [ 1 ¯ 1 0 ] tilt GB in SrTiO3 is explored using density functional theory. We find that oxygen vacancies segregate toward the GB, preferring to reside within the next nearest-neighbor layer. This oxygen vacancy segregation is found to be crucial for stabilizing this tilt GB. Furthermore, we find that the migration barriers of oxygen vacancies diffusing toward the first nearest-neighbor layer of the GB are low, while those away from this layer are very high. The segregation and trapping of the oxygen vacancies in the first nearest-neighbor layer of GBs are attributed to the large local distortions, which can now accommodate the preferred sixfold coordination of Ti. These results suggest that the electronic, transport, and capacitive properties of SrTiO3 can be engineered through the control of GB structure and grain size or layer thickness.

We have examined the crystallographic and magnetic properties of single crystals of CrI3, an easily cleavable, layered and insulating ferromagnet with a Curie temperature of 61 K. Our X-ray diffraction studies reveal a first-order crystallographic phase transition occurring near 210–220 K upon warming, with significant thermal hysteresis. The low-temperature structure is rhombohedral (R3, BiI3-type) and the high-temperature structure is monoclinic (C2/m, AlCl3-type). We find evidence for coupling between the crystallographic and magnetic degrees of freedom in CrI3, observing an anomaly in the interlayer spacing at the Curie temperature and an anomaly in the magnetic susceptibility at the structural transition. First-principles calculations reveal the importance of proper treatment of the long-ranged interlayer forces, and van der Waals density functional theory does an excellent job of predicting the crystal structures and their relative stability. Calculations also suggest that the ferromagnetic order f...

We describe both educational and research oriented examples of electronic density visualization with AViz. Several detailed cases are presented and the procedures for their preparation are described.

Diverse magnetic behaviors and weak van der Waals bonding make layered transition metal halides an active area of low-dimensional materials research, leading, for example, to the development ferromagnetic monolayers and heterostructures based on chromium trihalides. This paper shows that the $4d$ analogue MoCl${}_{3}$ has dramatically different magnetic behavior. Experimental and theoretical studies reveal evidence of strong antiferomagnetic interactions within the honeycomb net at high temperature, with an estimated in-plane exchange energy of 250 K. Upon cooling, the magnetism is quenched at a magnetostructural transition driven by strong dimerization involving the extended $d$-orbitals of Mo.