Search

BackgroundThe mortality rate in patients with ankylosing spondylitis (AS) and cervical fracture is relatively high.ObjectivesThis study aimed to investigate the instantaneous death risk and conditional survival (CS) in patients with AS and cervical fracture. We also studied the relationship between surgical timing and the incidence of complications.MethodsThis national multicentre retrospective study included 459 patients with AS and cervical fractures between 2003 and 2019. The hazard function was used to determine the risk of instantaneous death. The five-year CS was calculated to show the dynamic changes in prognosis.ResultsThe instantaneous death risk was relatively high in the first 6 months and gradually decreased over time in patients with AS and cervical fracture. For patients who did not undergo surgery, the instantaneous risk of death was relatively high in the first 15 months and gradually decreased over time. For patients with American Spinal Injury Association impairment scale (ASIA) A and B, the 5-year CS was 55.3% at baseline, and improved steadily to 88.4% at 2 years. Odds ratios (ORs) for pneumonia, electrolyte disturbance, respiratory insufficiency, and phlebothrombosis decreased as the surgery timing increased.ConclusionDeaths occurred mainly in the first 6 months after injury and gradually decreased over time. Our study highlights the need for continued surveillance and care in patients with AS with cervical fractures and provides useful survival estimates for both surgeons and patients. We also observed that early surgery can significantly increase functional recovery, and decrease the incidence of complications and rehospitalisation.

Objective We compared the efficacy of a closed suction irrigation system (CSIS) and negative pressure wound therapy (NPWT) for deep surgical site infection (SSI) after lumbar surgery with instrumentation. Methods We included 31 patients (NPWT group, n =16; CSIS group, n = 15) with deep SSIs after lumbar surgery with instrumentation from 2007 to 2017. The medical records were reviewed and patient characteristics, laboratory results, infection details, and treatment interventions were recorded. The Japanese Orthopaedic Association score and Oswestry disability index were used to assess pain and functional outcomes preoperatively and 3 and 12 months postoperatively. The cost of SSIs were compared between the NPWT and CSIS groups. Results No significant differences were found in the baseline characteristic data between the NPWT and CSIS groups. Implants were retained in all patients in the CSIS group, but required removal from 2 patients with late infections in the NPWT group. The average hospital stay was 36.8 ± 10.5 days and 33.4 ± 18.9 days in the NPWT and CSIS groups, respectively. The cost was greater in the NPWT group than in the CSIS group. Both NPWT and CSIS significantly reduced the Oswestry disability index and improved the Japanese Orthopaedic Association scores, but no significant difference was found between the 2 groups. Conclusions Our results have shown that both NPWT and CSIS are efficient techniques for the management of deep SSI after lumbar surgery with instrumentation. CSIS was more economical and the NPWT system was portable and easier for postoperative nursing care.

Interbody fusion surgery is often used to settle matters such as degenerative disc disease or disc herniation in clinical orthopedics. Considering the deficiencies of the current treatment methods, we developed an interbody fusion cage made of calcium silicate (CS)/polyetheretherketone (PEEK) and hoped that the bioactive cage could exhibit great fusion ability and maintain stable mechanical function. In the goat model of cervical interbody fusion, the CS/PEEK cage showed stronger interbody fusion at 12 and 26 weeks compared with pure PEEK cage based on the X-ray analysis. The micro-CT scanning and analysis indicated that the CS/PEEK cage induced more new bone ingrowth than the PEEK cage and led to nearly complete interbody fusion at 26 weeks. Moreover, the CS/PEEK group showed excellent mechanical stability and stiffness as evaluated by the spine kinematic assay at the time points. The histological assessment showed the rapid osseointegration and mineralized bone formation around the CS/PEEK cage. This study confirmed that the bioactive CS/PEEK cage is capable of inducing highly effective bone fusion and has high potential to be used in the clinics of spine surgery.

We report herein a mild and efficient oxidative radical intermolecular phosphonotrifluoromethylthiolation of unactivated alkenes with good functional group tolerance. The reaction operates via a radical pathway involving oxidative generation of phosphonyl radicals and umpolung radical coupling of silver trifluoromethanethiolate.

Objective We used a finite element (FE) analysis to investigate the biomechanical changes caused by transforaminal lumbar interbody fusion (TLIF) at the L4-L5 level by lumbar lordosis (LL) degree. Methods A lumbar FE model (L1-S5) was constructed based on computed tomography scans of a 30-year-old healthy male volunteer (pelvic incidence,= 50°; LL, 52°). We investigated the influence of LL on the biomechanical behavior of the lumbar spine after TLIF in L4-L5 fusion models with 57°, 52°, 47°, and 40° LL. The LL was defined as the angle between the superior end plate of L1 and the superior end plate of S1. A 150-N vertical axial preload was imposed on the superior surface of L3. A 10-N/m moment was simultaneously applied on the L3 superior surface along the radial direction to simulate the 4 basic physiologic motions of flexion, extension, lateral bending, and torsion in the numeric simulations. The range of motion (ROM) and intradiscal pressure (IDP) of L3-L4 were evaluated and compared in the simulated cases. Results In all motion patterns, the ROM and IDP were both increased after TLIF. In addition, the decrease in lordosis generally increased the ROM and IDP in all motion patterns. Conclusions This FE analysis indicated that decreased spinal lordosis may evoke overstress of the adjacent segment and increase the risk of the pathologic development of adjacent segment degeneration; thus, adjacent segment degeneration should be considered when planning a spinal fusion procedure.

The treatment of infectious or potentially infective bone defects remains a major problem in clinical practice. Silver has the ability to potentiate antibiotics against resistant bacterial strains. In order to reduce the risk of long-term infections, it is necessary for the biomaterial scaffold to release Ag+ in a controlled manner during the entire healing process. In this study, given the antimicrobial characteristics of nanosized Ag (NSAg), we synthesized β-tricalcium phosphate (β-TCP) doped with 5 and 10 wt% NSAg (5 wt% NSAgTCP and 10 wt% NSAgTCP, respectively). The NSAgTCP composites exhibited similar macroporous structures to pure β-TCP. The NSAgTCP samples were examined by scanning electron microscopy at 10,000-times magnification, which revealed that silver was still present at the nanometer scale. X-ray diffraction revealed that silver does not change the crystalline properties of β-TCP. In addition, we observed that the mechanical strength of NSAgTCP increased with increasing amounts of added Ag. The antibacterial, physical, and chemical properties of NSAgTCP were investigated in vitro. We found that NSAgTCP is effective at inhibiting the growth of Staphylococcus aureus and Escherichia coli and is not cytotoxic to human bone marrow mesenchymal stem cells. Moreover, it does not hinder liver or kidney function when tested in vivo. As the bioceramic degrades, Ag ions are slowly released and new bone is formed. No significant cytotoxic effects were observed even when 10 wt% NSAgTCP was used. NSAgTCP has the ability to simultaneously repair bone defects and act as an anti-infective agent; hence, we expect that this material, with its good bone-repairing and anti-infective properties, will find wide spread use as a novel bone substitute.

OBJECTIVE To compare the biomechanical properties of a novel annular incision technique, an oblique incision made approximately 60° to the spinal column, with the traditional transverse and longitudinal annular slit incision in an ex vivo sheep lumbar spine model. METHODS Sixteen sheep lumbar spines were used for the current ex vivo biomechanical comparative study. Functional spine unit (FSU) specimens composed of two vertebrae and one disc in the middle was cut from the whole lumbar spine. Annular slit incisions of 5 mm were made in different directions with a 15-blade knife at the intervertebral disc, following which partial discectomy was performed to produce the following groups: control with no incision, transverse slit, longitudinal slit and oblique slit groups. The specimens were then subjected to flexion-extension, lateral bending, axial rotation and compression tests. RESULTS As expected, the control group showed the least range of motion (ROM) in the flexion-extension test. The oblique slit group showed a trend toward a smaller ROM than the transverse and longitudinal groups in 1, 2, 3 and 5 Nm flexion-extension tests; these differences were not statistically significant (P > 0.05). In addition, the transverse (5.80° ± 0.20°), longitudinal (5.77° ± 0.67°) and oblique (5.47° ± 0.43°) slit groups showed a significantly larger ROM than the control group (3.22° ± 0.28°) in 2 Nm lateral bending tests (P 0.05). Following increments in the axial torsion force, the ROM was greater in all four experimental groups than the ROM with 1 Nm axial torsion. Furthermore, a significantly smaller axial rotational ROM was found in the oblique than the transverse group for 1 and 5 Nm force (P 0.05). Comparable ultimate loads to failure were found in the oblique, transverse and longitudinal groups; the highest ultimate load to failure being in the control group (P > 0.05). CONCLUSION The novel oblique slit annular incision to the intervertebral disc showed a trend toward better biomechanical properties than the traditional transverse and longitudinal slit incisions.

This study assessed the utility of three-dimensional preoperative image reconstruction as digital virtual templating for junior surgeons in placing a pedicle screw (PS) in the lumbar spine. Twenty-three patients of lumbar disease were operated on with bilateral PS fixation in our hospital. The two sides of lumbar pedicles were randomly divided into “hand-free group” (HFG) and “digital virtual template group” (DVTG) in each patient. Two junior surgeons preoperatively randomly divided into these two groups finished the placement of PSs. The accuracy of PS and the procedure time of PS insertion were recorded. The accuracy of PS in DVTG was 91.8% and that in HFG was 87.7%. The PS insertion procedure time of DVTG was74.5±8.1 s and that of HFG was90.9±9.9 s. Although no significant difference was reported in the accurate rate of PS between the two groups, the PS insertion procedure time was significantly shorter in DVTG than in HFG (P<0.05). Digital virtual template is simple and can reduce the procedure time of PS placement.

The combined anteversion surgical technique has been proposed and used in clinical practice. To more objectively evaluate the feasibility of this surgical technique using combined anteversion concept for DDH patients, we studied 34 DDH patients (40 hips) in this research. Every patient underwent pelvic CT scans before and after surgery and the HHSs were recorded. Optimal range of joint motion was measured using a three-dimensional reconstruction technique and a dynamic measurement technique. The results revealed that joint function met the requirements of daily life and the range of motion was not over-limited by impingement between the prosthesis and the skeleton. Moreover, the combined anteversion was found to be the most critical parameter in this study.

Surgical site infection (SSI) with instrumentation is an undesired and troublesome complication in orthopaedics. Surgical debridement is currently the main treatment option. However, the poor prognosis remains the major problem and over 40% of patients needed additional surgery to remove the implant. To eliminate SSI, antibacterial and biocompatible implants are urgently needed. Herein, a novel biocompatible polydopamine (PDA)-IR820-Daptomycin (DAP) coating with triple therapy functions was successfully fabricated to enhance the anti-infection ability and osteogenic property of titanium implants. In which, PDA served as a biocompatible binder to immobilize IR820 and DAP, and possessed photothermal and osteogenic properties. The releasing of DAP inhibited the growth of Staphylococcus aureus and damaged the bacterial membrane. Meanwhile, after 808 nm laser irradiation, the combination of hyperthermia generated by PDA and singlet oxygen (1O2) produced by IR820 eradicated the biofilm noninvasively. Furthermore, this coating successfully accelerated glutathione (GSH) oxidation and destroyed the bacterial membrane, reaching an anti-bacterial efficiency of 97.2% in vitro. Additionally, the coating significantly stimulated the proliferation and osteogenic differentiation of rat bone marrow stem cells (rBMSCs). In vivo, Ti-PDA-IR820-DAP reached an anti-bacterial efficiency of 97.9% in a S. aureus biofilm-infected rat model with 15 min of irradiation at 50 °C and drastically promoted the bone-implant osseointegration in a rat femur condyle defect model. The present study demonstrates that combining antibiotics and phototherapy represents a feasible way to treat bone-implant-associated infections.

Low back pain is associated with intervertebral disc degeneration (IVDD) due to cellular loss through apoptosis. Mechanical factors play an important role in maintaining the survival of the annulus fibrosus (AF) cells and the deposition of extracellular matrix. However, the mechanisms that excessive mechanical forces lead to AF cell apoptosis are not clear. The present study was to look for how AF cells sense mechanical changes. In vivo experiments, the involvement of mechanoreceptors in apoptosis was examined by RT-PCR and/or immunoblotting in the lumbar spine of rats subjected to unbalanced dynamic and static forces. In vitro experiments, we investigated apoptotic signaling pathways in untransfected and transfected AF cells with the lentivirus vector for rat β1 integrin overexpression after cyclic stretch. Apoptosis in AF cells was assessed using flow cytometry, Hoechst 33258 nuclear staining. Western blotting was used to analyze expression of β1 integrin and caspase-3 and ERK1/2 MAPK signaling molecules. In the rat IVDD model, unbalanced dynamic and static forces induced apoptosis of disc cells, which corresponded to decreased expression of β1 integrin. Cyclic stretch-induced apoptosis in rat AF cells correlated with the activation of caspase-3 and with decreased levels of β1 integrin and the phosphorylation levels of ERK1/2 activation level. However, the overexpression of β1 integrin in AF cells ameliorated cyclic stretch-induced apoptosis and decreased caspase-3 activation. Furthermore, ERK1/2-specific inhibitor promotes apoptosis in vector β1-infected AF cells. These results suggest that the disruption of β1 integrin signaling may underlie disc cell apoptosis induced by mechanical stress. Further work is necessary to fully elucidate the pathophysiological mechanisms that underlie IVDD caused by unbalanced dynamic and static forces.

A variety of bone substitutes have been successfully used to fill PEEK cages in cervical interbody fusion in order to avoid the complications related to bone harvesting from the donor site. However, no controlled study has previously been conducted to compare the effectiveness of PEEK interbody cages containing calcium sulphate/ demineralized bone matrix (CS/DBM) with autogenous cancellous bone for the treatment of cervical spondylosis. The objective of this prospective, randomized clinical study was to evaluate the effectiveness of implanting PEEK cages containing CS/DBM for the treatment of cervical radiculopathy and/or myelopathy.Sixty-eight patients with cervical radiculopathy and/or myelopathy were randomly assigned to receive one- or two-level discectomy and fusion with PEEK interbody cages containing CS/DBM or autogenous iliac cancellous bone (AIB). The patients were followed up for two years postoperatively. The radiological and clinical outcomes were assessed during a two-year follow-up.The mean blood loss was 75 ± 18.5 ml in the CS/DBM group and 100 ± 19.6 ml (P 0.01) in the AIB group. The fusion rate was 94.3 % in the CS/DBM group and 100 % in the AIB group at 12-month follow-up. The fusion rate was 100 % at final follow-up in both groups. No significant difference (P 0.05) was found regarding improvement of JOA score and segmental lordosis as well as neck and arm pain at all time intervals between the two groups. The total complication rate was significantly higher (P 0.05) in the AIB group than in the CS/DBM group, but there was no significant difference between the two groups (P 0.05) when comparing the complications in the neck.In conclusion, the PEEK interbody fusion cage containing CS/DBM or AIB following one- or two-level discectomy had a similar outcome for cervical spondylotic radiculopathy and/or myelopathy. The rate of fusion and the recovery rate of JOA score between the two groups were the same. The filling of CS/DBM in the PEEK cage instead of AIB has the advantage of less operative blood loss and fewer complications at the donor site.

To prospectively evaluate the functional and radiological outcomes of Isobar semi-rigid dynamic posterior stabilization adjacent to single-level fusion up to and including 24 months postoperatively.A prospective follow-up for 24 months of 36 patients who underwent posterior Isobar dynamic stabilization due to single-level degenerative lumbar discopathy and instability (DLDI) with mild adjacent level degeneration, with collection of functional [visual analog scale (VAS) and Oswestry Disability Index (ODI)] and radiological data (resting, functional X-rays and MRI).Functional outcomes at 24 months showed significant improvement in mean VAS score by 38.9 points (P 0.01) and ODI by 22.4 points (P 0.01). Compared with data preoperatively, disc height at the index and adjacent levels and intervertebral angle (IVA) at the index level showed a slight decreasing trend at each follow-up (P 0.05), while IVA at the adjacent level showed a slight increasing trend (P 0.05). Range of motion averaged 2.84° at the index level and remained unchanged at the adjacent level (P 0.05). The mean Pfirrmann score changed from 2.86 preoperatively to 2.92 at 24 months postoperatively at the index level (P 0.05), and from 1.92 preoperatively to 1.96 at 24 months postoperatively at the adjacent level (P 0.05). No reoperation, loosening of screws or infection was recorded.Patients with single-level DLDI and mild adjacent level degeneration treated with Isobar stabilization show a clinical improvement after 2 years. However, disc degeneration at the index and adjacent levels seems to continue despite using semi-rigid dynamic stabilization.

Large segmental bone defects remain a challenge for reconstructive surgeons. A two-stage repair strategy may offer a potential solution. Here, we sought to evaluate the osteoinductive potential of bone cement-induced membranes in an ectopic site.First, bone cements were inserted into the subcutaneous tissues of 16 rabbits to induce membrane formation. After 2, 4, 6 and 8 weeks, the induced membranes were harvested to assess their vascularization and osteoinductive potential. Next, bone cements were subcutaneously inserted into 12 rabbits for 4 weeks. These bone cements were then harvested from the newly formed membranes and replaced with granular porous β-TCP, with or without bone mesenchymal stem cells. New bone formation was then evaluated after 3, 6 and 9 weeks.The highest level of blood vessel formation and bone morphogenetic protein-2 expression in the membranes were found at 4 weeks (p0.05). In addition, vascular endothelial growth factor concentration was highest after 2 weeks (p0.001), persisting until 8 weeks. However, the results showed little ectopic bone formation at these time points.While bone cement-induced membranes appear to provide a suitable environment for bone formation, they fail to drive osteoinduction in non-osseous sites for the purposes of bone tissue engineering.

Large bone defect, which often results from the nonunion of the fracture, tumor resection, traumatology and revision reconstruction, is still a great challenge in the orthopaedic surgery. The ideal graft is autogenous bone which is limited in quantity and the harvest procedure is usually painful. The allogenous bone could be used as an alternative. However, the integration and replacement process are slow. And the potential viral and bacterial transmission and the immunoreactions draw back its application. In recent years, more and more biocompatible and biodegradable materials are used as bone substitutes. And tissue engineering provides a tool to create a living bone in vitro.

A three-dimensional dynamic perfusion system was developed to provide mass transport and nutrient supply to permit the cell proliferation during the long-term culture inside a β-tricalcium phosphate (β-TCP) scaffold. Also the flow field throughout the scaffold was studied. The porous cylindrical scaffold with a central channel was seeded with the sheep mesenchymal stem cells (MSCs). Then the cell-seeded scaffolds were continuously perfused with the complete α-MEM medium by a peristaltic pump for 7, 14 and 28 days, respectively. Histological study showed that the cell proliferation rates were different throughout the whole scaffolds and the different cell coverage was shown in different positions of the scaffold. Unoccupied spaces were found in many macropores. A computational fluid dynamics (CFD) modeling was used to simulate the flow conditions within perfused cell-seeded scaffolds to give an insight into the mechanisms of these cell growth phenomena. Relating the simulation results to perfusion experiments, the even fluid velocity (approximately 0.52 mm/s) and shear stress (approximately 0.0055 Pa) were found to correspond to increased cell proliferation within the cell–scaffold constructs. Flow speeds were between 0.25 and 0.75 mm/s and shear stresses were between 0.003 and 0.008 Pa in approximately 75% of the regions. This method exhibits novel capabilities to compare the results obtained for different perfusion rates or different scaffold microarchitectures. It may allow specific fluid velocities and shear stresses to be determined to optimize the perfusion flow rate, porous scaffold architecture and distribution of in vitro tissue growth.

A 3-dimensional flow perfusion system has been created in our laboratory to provide continuous and homogeneous nutrient supply inside the critical-size beta-tricalcium phosphate (beta-TCP) scaffold and permit cell proliferation during long-term incubation. The critical-size porous cylindrical scaffold (14 mm in diameter, 30 mm in length) with a central tunnel was impregnated with sheep mesenchymal stem cells. In the flow perfusion group, the hybrid scaffolds were continuously perfused with complete alpha-minimum essential medium via a peristaltic pump for 7, 14, and 28 days. In the static culture group, the hybrid composites were immersed in the medium without perfusion for 14 and 28 days. The daily glucose consumption was much higher in the flow perfusion group than in the static group (p < 0.001). In the flow perfusion group, glucose consumption increased dramatically in the first 14 days, and the increase slowed in the last 14 days. In the static group, the increase occurred only in the first 14 days. Cell viability via MTT colorimetry increased with time, which coincided with the results of glucose consumption. Histological study showed that the cells proliferated through the whole scaffolds under the flow perfusion culture. While under the static culture, the cells survived and proliferated only inside the first to third rows of the macropores under the scaffold surface. The cell quantity increased with time under flow perfusion culture. The results suggest that flow perfusion culture is superior to static culture for mesenchymal stem cell proliferation in the critical-size porous scaffold. This perfusion culture system permits a constant nutrition supply into the center of a large-scale scaffold for at least 4 weeks. Determination of D-glucose in the culture medium is a noninvasive way to survey cell proliferation in this system.

Few histological studies on bone substitutes in human cervical spine are available and the biological processes of bone substitutes are not well documented. The authors studied four failure cases of cervical interbody fusion: two cases with hydroxyapatite (HA), one case with beta-tricalcium phosphate ceramic (beta-TCP) and one case with xenograft (bovine bone). Clinical data showed that all the patients experienced neck pain with or without numbness of upper extremity due to fusion failure. Successful fusions were achieved after the salvage surgeries in which autograft were used. Radiographs showed that radiolucent lines were present in all cases. Two HA substitutes fractured without complications. One of them sank into the vertebral body. Some small beta-TCP fragments were found under the microscope. Histological study demonstrated only a few newly formed bones at the interface of the substitutes. The fragments of HA were encapsulated by fibrous tissue. The degradation process and bone regeneration were more active in beta-TCP than in HA. The intertrabecular spaces of bovine bone were filled with fibrous tissue. The results suggest that a porous calcium phosphate ceramic with special design might assure bone ingrowth and meet the mechanical requirements in cervical interbody fusion. The complications of these materials in the cervical spine should be highlighted.

The antibiotic compound, rifampicin (RFP), was loaded into porous reinforced β-tricalcium phosphate (β-TCP) scaffolds using three different solution adsorption methods. This resulted in drug delivery systems (DDS) generated by vacuum adsorption (VA), dynamic adsorption (DA), and static adsorption (SA). In vitro examination of the drug loading and release profiles of the DDS indicated that the unit mass of RFP loaded into the scaffold by the VA method (0.44 mg/g) was higher than that achieved by SA (0.42 mg/g) or DA (0.38 mg/g) (P0.05). The mechanical strength had no significant change after RFP-loading (P0.05). Moreover, there were no significant differences among the mechanical strength of three β-TCP DDS generated by loading RFP using SA, DA, and VA (P0.05). In vitro release testing showed an initial burst release of RFP from the three different DDS within the first 3 h and in the first 51 h, the cumulative release of RFP from VA-DDS, DA-DDS, and SA-DDS had reached 56.2, 83.6, and 88.6 %, respectively. Complete RFP release had occurred from VA-DDS, DA-DDS, and SA-DDS after 23, 17, and 15 days, respectively. As the VA-DDS method showed improved RFP loading and a more sustained drug release, this method is recommended for solution adsorption drug loading into porous β-TCP scaffolds to form a DDS.

A prospective, randomized clinical study was performed to determine whether unilateral pedicle screw fixation was comparable with bilateral fixation in 1- or 2-segment lumbar interbody fusion. One hundred eight patients with lumbar degenerative diseases were randomly assigned to the unilateral (n=56) or bilateral (n=52) pedicle screw fixation group. Interbody fusion was performed in 1 or 2 levels with 1 cage. Operative time, blood loss, duration of hospital stay, functional outcome, fusion rate, and complication rate were recorded and compared statistically. The patients were followed for 3 years postoperatively. Successful radiographic fusion was documented in all patients. No flexion–extension hypermobility or pedicle screw loosening or breakage occurred during the follow-up period. No significant difference existed between the 2 groups when comparing the union rate, complication rate, and functional outcome scores ( P >.05). However, compared with the bilateral pedicle screw group, a significant decrease occurred in operative time, duration of hospital stay, and blood loss in the unilateral group ( P

Fluid dynamic environment and scaffold architectures have an important influence on cell growth and distribution inside the scaffold. A porous cylindrical scaffold with a central channel is seeded with the sheep mesenchymal stem cells (MSCs) in this study. Then the cell seeded scaffold is continuously perfused with alpha-MEM medium by a peristaltic pump for 7, 14, and 28 days. Histological study shows that the cell proliferation rates are different throughout the whole scaffolds. The different cell coverage is shown in various positions of the scaffold. A computational fluid dynamics (CFD) modeling is used to simulate the flow conditions within perfused cell-seeded scaffolds to give insight into the mechanisms of these cell growth phenomena. Relating the simulation results to perfusion experiments, the even fluid velocity (approximately 0.26-0.64 mm/s) and shear stress (approximately 0.0029-0.027 Pa) are found to correspond to increased cell proliferation within the cell-scaffold constructs. This method exhibits novel capabilities to compare results obtained for different perfusion rates or different scaffold microarchitectures and may allow specific fluid velocities and shear stresses to be determined that optimize the perfusion flow rate, porous scaffold architecture, and distribution of in vitro tissue growth.

The histological reports on porous biphasic calcium phosphate ceramic (PBC) in human spine are limited. The osteogenesis and biodegradation of PBC are insufficiently known in human. In present study, the undecalcified histological study was carried out on 20 samples retrieved from posterior spinal fusion in order to reveal the osteogenesis and biodegradation of the PBC in human spine. The quantitative study was performed in 14 samples with sufficient size. Newly formed bone was found in all the samples. More new bone was formed in those samples closely in contact with autogenous bone. The PBC degradation particles were present both in the macrophages and around the tissue. However, those phenomena were highly variable among the samples. New bone formation increased with time and decreased with age. The PBC degradation decreased with age, but it did not differ greatly with time. New bone formation was higher and the residual material was lower in the fusion group than that in non-fusion group. The PBC is a kind of osteoconductive material and do not transform into new bone after a relatively long time. The PBC should be well mixed with the autogenous bone in order to achieve high new bone colonization. The PBC degradation particles and related active phagocytotic activity have been noted.

OBJECTIVE: The effect of Sox9 on the differentiation of bone marrow mesenchymal stem cells (BMSCs) to nucleus pulposus (NP)-like (chondrocyte-like) cells in vitro has been demonstrated. The objective of this study is to investigate the efficacy and feasibility of Sox9-transduced BMSCs to repair the degenerated intervertebral disc in a rabbit model. MATERIALS AND METHODS: Fifty skeletally mature New Zealand white rabbits were used. In the treatment groups, NP tissue was aspirated from the L2-L3, L3-L4, and L4-L5 discs in accordance with a previously validated rabbit model of intervertebral disc degeneration and then treated with thermogelling chitosan (C/Gp), GFP-transduced autologous BMSCs with C/Gp or Sox9-transduced autologous BMSCs with C/Gp. The role of Sox9 in the chondrogenic differentiation of BMSCs embedded in C/Gp gels in vitro and the repair effect of Sox9-transduced BMSCs on degenerated discs were evaluated by real-time PCR, conventional and quantitative MRI, macroscopic appearance, histology and immunohistochemistry. RESULTS: Sox9 could induce the chondrogenic differentiation of BMSCs in C/Gp gels and BMSCs could survive in vivo for at least 12 weeks. A higher T2-weighted signal intensity and T2 value, better preserved NP structure and greater amount of extracellular matrix were observed in discs treated with Sox9-transduced BMSCs compared with those without transduction. CONCLUSION: Sox9 gene transfer could significantly enhance the repair effect of BMSCs on the degenerated discs.