Search

The traditional method for transformer moisture diagnosis is to establish empirical equations between feature parameters extracted from frequency domain spectroscopy (FDS) and the transformer’s moisture content. However, the established empirical equation may not be applicable to a novel testing environment, resulting in an unreliable evaluation result. In this regard, it is acknowledged that FDS combined with machine learning is more suitable for estimating moisture content in a variety of test environments. Nonetheless, the accuracy of the estimation results obtained using the existing method is limited by the algorithm’s inability to generalize. To address this issue, we propose an AdaBoost algorithm-enhanced back-propagation neural network (BP_AdaBoost). This study creates a database by extracting feature parameters from the FDS that characterize the insulation states of the prepared samples. Then, using the BP_AdaBoost algorithm and the newly constructed database, the moisture estimation models are trained. Finally, the results of the estimation are discussed in terms of laboratory and field transformers. By comparing the proposed BP_AdaBoost algorithm to other intelligence algorithms, it is demonstrated that it not only performs better in generalization, but also maintains a high level of accuracy. [ABSTRACT FROM AUTHOR]

To satisfy the requirement of quality control in printing and packaging industry, a sheet counting apparatus is developed, which adopts a line-scan camera to image the fringes of sheet stack and is able to provide a real-time and noncontact measurement of their quantity. With a brief introduction of the system architecture, our main work focuses on the sheet counting algorithms. The basic principle is to identify each sheet profile from the 1-D image with a robust ridge strength measurement. First, a multiscale bi-Gaussian ridge likelihood measurement and a ridge-valley descriptor are utilized to improve adjacent objects detection by increasing local contrast around sheet fringes. Then, a sheet recognition scheme, which integrates a peak detection algorithm and the ridge region criteria for verification, is proposed to discriminate true sheets from the obtained ridgeness measure. According to experiments and tests in real production lines, our apparatus can reach a very high measuring accuracy for printing papers or cards with a thickness not <0.2 mm. [ABSTRACT FROM PUBLISHER]

Fighting against the pandemic diseases with unique characters requires new sophisticated approaches like the artificial intelligence. This paper develops an artificial intelligence algorithm to produce multi-dimensional policies for controlling and minimizing the pandemic casualties under the limited pharmacological resources. In this respect, a comprehensive parametric model with a priority and age-specific vaccination policy and a variety of non-pharmacological policies are introduced. This parametric model is utilized for constructing an artificial intelligence algorithm by following the exact analogy of the model-based solution. Also, this parametric model is manipulated by the artificial intelligence algorithm to seek for the best multi-dimensional non-pharmacological policies that minimize the future pandemic casualties as desired. The role of the pharmacological and non-pharmacological policies on the uncertain future casualties are extensively addressed on the real data. It is shown that the developed artificial intelligence algorithm is able to produce efficient policies which satisfy the particular optimization targets such as focusing on minimization of the death casualties more than the infected casualties or considering the curfews on the people age over 65 rather than the other non-pharmacological policies. The paper finally analyses a variety of the mutant virus cases and the corresponding non-pharmacological policies aiming to reduce the morbidity and mortality rates. [ABSTRACT FROM AUTHOR]

This paper focuses on minimum-time path tracking, a subproblem in motion planning of robotic systems. We generate a time-optimal velocity profile for robotic manipulators taking into account kinematic and dynamic constraints. Based on the special structure of the constraints (called peaked constraints), profile generation is formulated as a linear programming (LP) problem. The LP-based control problem is solved by a sequential optimization method. The presented algorithm has reduced computational time compared to a general LP solver. [ABSTRACT FROM AUTHOR]

Many datasets including social media data and bibliographic data can be modeled as graphs. Clustering such graphs is able to provide useful insights into the structure of the data. To improve the quality of clustering, node attributes can be taken into account, resulting in attributed graphs. Existing attributed graph clustering methods generally consider attribute similarity and structural similarity separately. In this paper, we represent attributed graphs as star-schema heterogeneous graphs, where attributes are modeled as different types of graph nodes. This enables the use of personalized pagerank (PPR) as a unified distance measure that captures both structural and attribute similarities. We employ DBSCAN for clustering, and we update edge weights iteratively to balance the importance of different attributes. The rapidly growing volume of data nowadays challenges traditional clustering algorithms, and thus, a distributed method is required. Hence, we adopt a popular distributed graph computing system Blogel, based on which, we develop four exact and approximate approaches that enable efficient PPR score computation when edge weights are updated. To improve the effectiveness of the clustering, we propose a simple yet effective edge weight update strategy based on entropy. In addition, we present a game theory based method that enables trading efficiency for result quality. Extensive experiments on real-life datasets offer insights into the effectiveness and efficiency of our proposals. [ABSTRACT FROM AUTHOR]

High quality scholarship requires technical excellence but also connects the work to the primary references in the field. In this way, the reader advances their knowledge and gains perspective. The TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING supports these goals by recognizing the best paper chosen by the Associate Editors and reviewers. The winning paper was selected from 140 papers published by TSM in 2015. The winner is “An Algorithm of Multi-Subpopulation Parameters With Hybrid Estimation of Distribution for Semiconductor Scheduling With Constrained Waiting Time” by Hung-Kai Wang, Chen-Fu Chien, and Mitsuo Gen published in the August 2015 issue of the IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (10.1109/TSM.2015.2439054). I congratulate the authors on their selection. [ABSTRACT FROM AUTHOR]

In one of the several manifestations, the future cellular networks are required to accommodate a massive number of devices, several orders of magnitude compared to today’s networks. At the same time, the future cellular networks will have to fulfill stringent latency constraints. To that end, one problem that is posed as a potential showstopper is extreme congestion for requesting uplink scheduling over the physical random access channel (PRACH). Indeed, such congestion drags along scheduling delay problems. In this paper, the use of self-organized device-to-device (D2D) clustering is advocated for mitigating PRACH congestion. To this end, this paper proposes two D2D clustering schemes, namely, random-based clustering and channel-gain-based clustering. Accordingly, this paper sheds light on random access within the proposed D2D clustering schemes and presents a case study based on a stochastic geometry framework. For the sake of objective evaluation, the D2D clustering is benchmarked by the conventional scheduling request procedure. Accordingly, this paper offers insights into useful scenarios that minimize the scheduling delay for each clustering scheme. Finally, this paper discusses the implementation algorithm and some potential implementation issues and remedies. [ABSTRACT FROM AUTHOR]

The presence of condensate inside the dryer cylinders of a paper machine produces a significant increase in the power required to accelerate the section, risking a drive overload and/or section shutdown. In previous works, the authors developed a robust estimation algorithm for the condensate power and a generalized correlation for the estimation of condensate loads in industrial dryer cylinders up to 55 mm of condensate rim. This paper presents and evaluates a rule-based expert system (ES) capable of detecting the presence and amount of condensate in up to three groups of cylinders with different condensate loads. The ES can give an early warning message to the operators and determine the condensate load and number of cylinders within each group. Evaluation is done using a combined condensate load for a fictitious 1500-mm eight-cylinder dryer section. Results show the capacity of the developed ES to give an early warning as well as a correct estimation of the condensate loads and number of cylinders involved. [ABSTRACT FROM PUBLISHER]

Craters are among the most abundant features on the surface of many planets with great importance for planetary scientists. They reveal chronology information about planets and may be used for autonomous spacecraft navigation and landing. Although numerous research efforts have been carried out in the field of crater detection, existing crater detection algorithms (CDAs) are only helpful in a limited number of applications. A promising crater detection approach involves two main steps: 1) hypothesis generation (HG) and 2) hypothesis verification (HV). During HG, potential crater locations are detected. The validity of the hypothesized crater locations is then tested in a HV step. In this context, we discuss some commonly used algorithms for HG such as highlight-shadow region detection and Hough transform as well as our novel and enhanced algorithms based on interest point detection and convex grouping. A key objective of this paper is to analyze their performance while paying special attention to how they affect the accuracy of the verification step. To deal with different size craters, we focus on multiscale HG. For HV, we have chosen convolutional neural networks which have recently achieved state-of-the-art performance in many computer vision applications. Due to the variation of test sets in the literature, it is often challenging to compare the performance of different CDAs in a fair way. In this paper, we present a comprehensive performance evaluation and comparison of CDAs. Each algorithm has been trained/tested using common data sets generated by a systematic approach. [ABSTRACT FROM AUTHOR]

The steady-state visual evoked potential (SSVEP) has become one of the most prominent BCI paradigms with high information transfer rate, and has been widely applied in rehabilitation and assistive applications. This paper proposes a least-square (LS) unified framework to summarize the correlation analysis (CA)-based SSVEP spatial filtering methods from a machine learning perspective. Within this framework, the commonalities and differences between various spatial filtering methods appear apparent, the interpretation of computational factors becomes intuitive, and spatial filters can be determined by solving a generalized optimization problem with non-linear and regularization items. Moreover, the proposed LS framework provides the foundation of utilizing the knowledge behind these spatial filtering methods in further classification/regression model designs. Through a comparative analysis of existing representative spatial filtering methods, recommendations are made for the superior and robust design strategies. These recommended strategies are further integrated to fill the research gaps and demonstrate the ability of the proposed LS framework to promote algorithmic improvements, resulting in five new spatial filtering methods. This study could offer significant insights in understanding the relationships between various design strategies in the spatial filtering methods from the machine learning perspective, and would also contribute to the development of the SSVEP recognition methods with high performance.

Timely diagnosis of mild traumatic brain injury (mTBI) remains challenging due to the rapid recovery of acute symptoms and the absence of evidence of injury in static neuroimaging scans. Furthermore, while longitudinal tracking of mTBI is essential in understanding how the diseases progresses/regresses over time for enhancing personalized patient care, a standardized approach for this purpose is not yet available. Recent functional neuroimaging studies have provided evidence of brain function alterations following mTBI, suggesting mTBI-detection models can be built based on these changes. Most of these models, however, rely on manual feature engineering, but the optimal set of features for detecting mTBI may be unknown. Data-driven approaches, on the other hand, may uncover hidden relationships in an automated manner, making them suitable for the problem of mTBI detection. This paper presents a data-driven framework based on Siamese Convolutional Neural Network (SCNN) to detect mTBI and to monitor the recovery state from mTBI over time. The proposed framework is tested on the cortical images of Thy1-GCaMP6s mice, obtained via widefield calcium imaging, acquired in a longitudinal study. Results show that the proposed model achieves a classification accuracy of 96.5%. To track the state of the injured brain over time, a reference distance map is constructed, which together with the SCNN model, are employed to assess the recovery state in subsequent sessions after injury, revealing that the recovery progress varies among subjects. The promising results of this work suggest that a similar approach could be potentially applicable for monitoring recovery from mTBI, in humans.

Various measures have been proposed to quantify upper-limb use through wrist-worn inertial measurement units. The two most popular traditional measures of upper-limb use - thresholded activity counts (TAC) and the gross movement (GM) score suffer from high sensitivity and low specificity, and vice versa. We previously proposed a hybrid version of these two measures - the GMAC - that showed better overall detection performance than TAC and GM. In this paper, we answer two critical questions to improve the GMAC measure's usefulness: (a) can it be implemented using only the accelerometer data? (b) what are its optimal parameter values? Here, we propose a modified GMAC using only the accelerometer data and optimize its parameters to develop: (a) a generic measure that is both limb- and subject-independent, and (b) limb-specific measures that were only subject-independent. The optimized GMAC showed better detection performance than the previous GMAC and surprisingly had comparable performance to the best-performing machine learning-based measure (random forest inter-subject model). In hemiparetic data, its performance was similar to the previous GMAC and the random forest inter-subject model; the limb-specific GMAC measure, however, had a better performance than the generic measure. The optimized limb-specific GMAC is a simple, interpretable alternative to a machine learning-based inter-subject model. The optimized GMAC can be a valuable measure for offline or real-time detection and feedback of upper limb use. The preliminary results of this study, based on a small dataset, need to be validated on a larger dataset to evaluate its generalizability.

Many challenges exist in the study of using orthotics, exoskeletons or exosuits as tools for rehabilitation and assistance of healthy people in daily activities due to the requirements of portability and safe interaction with the user and the environment. One approach to dealing with these challenges is to design a control system that can be deployed in a portable device to identify the relationships that exist between the gait variables and gait cycle for different locomotion modes. In order to estimate the knee and ankle angles in the sagittal plane for different locomotion modes, a novel multimodal feature-decoupled kinematic estimation system consisting of a multimodal locomotion classifier and an optimal joint angle estimator is proposed in this paper. The multi-source information output from different conventional primary models are fused by assigning the non-fixed weight. To improve the performance of the primary models, a data augmentation module based on the time-frequency domain analysis method is designed. The results show that the inclusion of the data augmentation module and multi-source information fusion modules has improved the classification accuracy to 98.56% and kinematic estimation performance (PCC) to 0.904 (walking), 0.956 (running), 0.899 (stair ascent), 0.851 (stair descent), respectively. The kinematic estimation quality is generally higher for faster speed (running) or proximal joint (knee) compared to other modes and ankle. The limitations and advantages of the proposed approach are discussed. Based on our findings, the multimodal kinematic estimation system has potential in facilitating the deployment for human-in-loop control of lower-limb intelligent assistive devices.

Modeling the muscle response to functional electrical stimulation (FES) is an important step during model-based FES control system design. The Hammerstein structure is widely used in simulating this nonlinear biomechanical response. However, a fixed relationship cannot cope well with the time-varying property of muscles and muscle fatigue. In this paper, we proposed an adaptive Hammerstein model to predict ankle joint torque induced by electrical stimulation, which used variable forgetting factor recursive least squares (VFFRLS) method to update the model parameters. To validate the proposed model, ten healthy individuals were recruited for short-duration FES experiments, ten for long-duration FES experiments, and three stroke patients for both. The isometric ankle dorsiflexion torque induced by FES was measured, and then the test performance of the fixed-parameter Hammerstein model, the adaptive Hammerstein model based on fixed forgetting factor recursive least squares (FFFRLS) and the adaptive Hammerstein model based on VFFRLS was compared. The goodness of fit, root mean square error, peak error and success rate were applied to evaluate the accuracy and stability of the model. The results indicate a significant improvement in both the accuracy and stability of the proposed adaptive model compared to the fixed-parameter model and the adaptive model based on FFFRLS. The proposed adaptive model enhances the ability of the model to cope with muscle changes.

The olfactory system enables humans to smell different odors, which are closely related to emotions. The high temporal resolution and non-invasiveness of Electroencephalogram (EEG) make it suitable to objectively study human preferences for odors. Effectively learning the temporal dynamics and spatial information from EEG is crucial for detecting odor-induced emotional valence. In this paper, we propose a deep learning architecture called Temporal Attention with Spatial Autoencoder Network (TASA) for predicting odor-induced emotions using EEG. TASA consists of a filter-bank layer, a spatial encoder, a time segmentation layer, a Long Short-Term Memory (LSTM) module, a multi-head self-attention (MSA) layer, and a fully connected layer. We improve upon the previous work by utilizing a two-phase learning framework, using the autoencoder module to learn the spatial information among electrodes by reconstructing the given input with a latent representation in the spatial dimension, which aims to minimize information loss compared to spatial filtering with CNN. The second improvement is inspired by the continuous nature of the olfactory process; we propose to use LSTM-MSA in TASA to capture its temporal dynamics by learning the intercorrelation among the time segments of the EEG. TASA is evaluated on an existing olfactory EEG dataset and compared with several existing deep learning architectures to demonstrate its effectiveness in predicting olfactory-triggered emotional responses. Interpretability analyses with DeepLIFT also suggest that TASA learns spatial-spectral features that are relevant to olfactory-induced emotion recognition.

Robot-assisted motor training is applied for neurorehabilitation in stroke patients, using motor imagery (MI) as a representative paradigm of brain-computer interfaces to offer real-life assistance to individuals facing movement challenges. However, the effectiveness of training with MI may vary depending on the location of the stroke lesion, which should be considered. This paper introduces a multi-task electroencephalogram-based heterogeneous ensemble learning (MEEG-HEL) specifically designed for cross-subject training. In the proposed framework, common spatial patterns were used for feature extraction, and the features according to stroke lesions are shared and selected through sequential forward floating selection. The heterogeneous ensembles were used as classifiers. Nine patients with chronic ischemic stroke participated, engaging in MI and motor execution (ME) paradigms involving finger tapping. The classification criteria for the multi-task were established in two ways, taking into account the characteristics of stroke patients. In the cross-subject session, the first involved a direction recognition task for two-handed classification, achieving a performance of 0.7419 (±0.0811) in MI and 0.7061 (±0.1270) in ME. The second task focused on motor assessment for lesion location, resulting in a performance of 0.7457 (±0.1317) in MI and 0.6791 (±0.1253) in ME. Comparing the specific-subject session, except for ME on the motor assessment task, performance on both tasks was significantly higher than the cross-subject session. Furthermore, classification performance was similar to or statistically higher in cross-subject sessions compared to baseline models. The proposed MEEG-HEL holds promise in improving the practicality of neurorehabilitation in clinical settings and facilitating the detection of lesions.

As an essential cognitive function, attention has been widely studied and various indices based on EEG have been proposed for its convenience and easy availability for real-time attention monitoring. Although existing indices based on spectral power of empirical frequency bands are able to describe the attentional state in some way, the reliability still needs to be improved. This paper proposed a subject-specific attention index based on the weighted spectral power. Unlike traditional indices, the ranges of frequency bands are not empirical but obtained from subject-specific change patterns of spectral power of electroencephalograph (EEG) to overcome the great inter-subject variance. In addition, the contribution of each frequency component in the frequency band is considered different. Specifically, the ratio of power spectral density (PSD) function in attentional and inattentional state is utilized to calculate the weight to enhance the effectiveness of the proposed index. The proposed subject-specific attention index based on the weighted spectral power is evaluated on two open datasets including EEG data of a total of 44 subjects. The results of the proposed index are compared with 3 traditional attention indices using various statistical analysis methods including significance tests and distribution variance measurements. According to the experimental results, the proposed index can describe the attentional state more accurately. The proposed index respectively achieves accuracies of 86.21% and 70.00% at the 1% significance level in both the t-test and Wilcoxon rank-sum test for two datasets, which obtains improvements of 41.38% and 20.00% compared to the best result of the traditional indices. These results indicate that the proposed index provides an efficient way to measure attentional state.

The existing surface electromyography-based pattern recognition system (sEMG-PRS) exhibits limited generalizability in practical applications. In this paper, we propose a stacked weighted random forest (SWRF) algorithm to enhance the long-term usability and user adaptability of sEMG-PRS. First, the weighted random forest (WRF) is proposed to address the issue of imbalanced performance in standard random forests (RF) caused by randomness in sampling and feature selection. Then, the stacking is employed to further enhance the generalizability of WRF. Specifically, RF is utilized as the base learner, while WRF serves as the meta-leaning layer algorithm. The SWRF is evaluated against classical classification algorithms in both online experiments and offline datasets. The offline experiments indicate that the SWRF achieves an average classification accuracy of 89.06%, outperforming RF, WRF, long short-term memory (LSTM), and support vector machine (SVM). The online experiments indicate that SWRF outperforms the aforementioned algorithms regarding long-term usability and user adaptability. We believe that our method has significant potential for practical application in sEMG-PRS.

Electroencephalogram (EEG) signals are widely utilized in the field of cognitive workload decoding (CWD). However, when the recognition scenario is shifted from subject-dependent to subject-independent or spans a long period, the accuracy of CWD deteriorates significantly. Current solutions are either dependent on extensive training datasets or fail to maintain clear distinctions between categories, additionally lacking a robust feature extraction mechanism. In this paper, we tackle these issues by proposing a Bi-Classifier Joint Domain Adaptation (BCJDA) model for EEG-based cross-time and cross-subject CWD. Specifically, the model consists of a feature extractor, a domain discriminator, and a Bi-Classifier, containing two sets of adversarial processes for domain-wise alignment and class-wise alignment. In the adversarial domain adaptation, the feature extractor is forced to learn the common domain features deliberately. The Bi-Classifier also fosters the feature extractor to retain the category discrepancies of the unlabeled domain, so that its classification boundary is consistent with the labeled domain. Furthermore, different adversarial distance functions of the Bi-Classifier are adopted and evaluated in this model. We conduct classification experiments on a publicly available BCI competition dataset for recognizing low, medium, and high cognitive workload levels. The experimental results demonstrate that our proposed BCJDA model based on cross-gradient difference maximization achieves the best performance.

Physical therapists play a crucial role in guiding patients through effective and safe rehabilitation processes according to medical guidelines. However, due to the therapist-patient imbalance, it is neither economical nor feasible for therapists to provide guidance to every patient during recovery sessions. Automated assessment of physical rehabilitation can help with this problem, but accurately quantifying patients' training movements and providing meaningful feedback poses a challenge. In this paper, an Expert-knowledge-based Graph Convolutional approach is proposed to automate the assessment of the quality of physical rehabilitation exercises. This approach utilizes experts' knowledge to improve the spatial feature extraction ability of the Graph Convolutional module and a Gated pooling module for feature aggregation. Additionally, a Transformer module is employed to capture long-range temporal dependencies in the movements. The attention scores and weight matrix obtained through this approach can serve as interpretability tools to help therapists understand the assessment model and assist patients in improving their exercises. The effectiveness of the proposed method is verified on the KIMORE dataset, achieving state-of-the-art performance compared to existing models. Experimental results also illustrate the interpretability of the method in both spatial and temporal dimensions.

Electroencephalography (EEG) signals are the brain signals acquired using the non-invasive approach. Owing to the high portability and practicality, EEG signals have found extensive application in monitoring human physiological states across various domains. In recent years, deep learning methodologies have been explored to decode the intricate information embedded in EEG signals. However, since EEG signals are acquired from humans, it has issues with acquiring enormous amounts of data for training the deep learning models. Therefore, previous research has attempted to develop pre-trained models that could show significant performance improvement through fine-tuning when data are scarce. Nonetheless, existing pre-trained models often struggle with constraints, such as the necessity to operate within datasets of identical configurations or the need to distort the original data to apply the pre-trained model. In this paper, we proposed the domain-free transformer, called DFformer, for generalizing the EEG pre-trained model. In addition, we presented the pre-trained model based on DFformer, which is capable of seamless integration across diverse datasets without necessitating architectural modification or data distortion. The proposed model achieved competitive performance across motor imagery and sleep stage classification datasets. Notably, even when fine-tuned on datasets distinct from the pre-training phase, DFformer demonstrated marked performance enhancements. Hence, we demonstrate the potential of DFformer to overcome the conventional limitations in pre-trained model development, offering robust applicability across a spectrum of domains.

Sleep staging serves as a fundamental assessment for sleep quality measurement and sleep disorder diagnosis. Although current deep learning approaches have successfully integrated multimodal sleep signals, enhancing the accuracy of automatic sleep staging, certain challenges remain, as follows: 1) optimizing the utilization of multi-modal information complementarity, 2) effectively extracting both long- and short-range temporal features of sleep information, and 3) addressing the class imbalance problem in sleep data. To address these challenges, this paper proposes a two-stream encode-decoder network, named TSEDSleepNet, which is inspired by the depth sensitive attention and automatic multi-modal fusion (DSA2F) framework. In TSEDSleepNet, a two-stream encoder is used to extract the multiscale features of electrooculogram (EOG) and electroencephalogram (EEG) signals. And a self-attention mechanism is utilized to fuse the multiscale features, generating multi-modal saliency features. Subsequently, the coarser-scale construction module (CSCM) is adopted to extract and construct multi-resolution features from the multiscale features and the salient features. Thereafter, a Transformer module is applied to capture both long- and short-range temporal features from the multi-resolution features. Finally, the long- and short-range temporal features are restored with low-layer details and mapped to the predicted classification results. Additionally, the Lovász loss function is applied to alleviate the class imbalance problem in sleep datasets. Our proposed method was tested on the Sleep-EDF-39 and Sleep-EDF-153 datasets, and it achieved classification accuracies of 88.9% and 85.2% and Macro-F1 scores of 84.8% and 79.7%, respectively, thus outperforming conventional traditional baseline models. These results highlight the efficacy of the proposed method in fusing multi-modal information. This method has potential for application as an adjunct tool for diagnosing sleep disorders.

This study presents a novel high density surface electromyography (EMG) decomposition method, named as 2CFastICA, because it incorporates two key algorithms: kernel constrained FastICA and correlation constrained FastICA. The former focuses on overcoming the local convergence of FastICA without requiring the peel-off strategy used in the progressive FastICA peel-off (PFP) framework. The latter further refines the output of kernel constrained FastICA by correcting possible erroneous or missed spikes. The two constrained FastICA algorithms supplement each other to warrant the decomposition performance. The 2CFastICA method was validated using simulated surface EMG signals with different motor unit numbers and signal to noise ratios (SNRs). Two source validation was also performed by simultaneous high density surface EMG and intramuscular EMG recordings, showing a matching rate (MR) of (97.2 ± 3.5)% for 170 common motor units. In addition, a different form of two source validation was also conducted taking advantages of the high density surface EMG characteristics of patients with amyotrophic lateral sclerosis, showing a MR of (99.4 ± 0.9)% for 34 common motor units from interference and sparse datasets. Both simulation and experimental results indicate that 2CFastICA can achieve similar decomposition performance to PFP. However, the efficiency of decomposition can be greatly improved by 2CFastICA since the complex signal processing procedures associated with the peel-off strategy are not required any more. Along with this paper, we also provide the MATLAB open source code of 2CFastICA for high density surface EMG decomposition.

Machine vision and artificial intelligence hold promise across healthcare applications. In this paper, we focus on the emerging research direction of infant action recognition, and we specifically consider the task of reaching which is an important developmental milestone. We develop E-babyNet, a lightweight yet effective neural-network-based framework for infant action recognition that leverages the spatial and temporal correlation of bounding boxes of infants' hands and objects to reach for to determine the onset and offset of the reaching action. E-babyNet consists of two main layers based on two LSTM and a Bidirectional LSTM (BiLSTM) model, respectively. The first layer provides a pre-evaluation of the reaching action for each hand by providing onset and offset keyframes. Then, the biLSTM model merges the previous outputs to deliver an outcome of the reaching actions detection for each frame including the reaching hand. We evaluated our approach against four other lightweight structures using a dataset comprising 5,865 annotated images resulting in 16,337 bounding boxes from 375 distinctive infant reaching actions performed while sitting by different subjects in unconstrained (home/clinic) environments. Results illustrate the effectiveness of our approach and ability to provide reliable reaching action detection and offer onset and offset keyframes with a precision of one frame. Moreover, the biLSTM layer can handle the transition between reaching actions and help reduce false detections.

Extreme events can cause severe power system damage. Resilience-driven operation of networked microgrids (MGs) has been heavily studied in literature. There is, though, little research considering the influence of resilience on decision making for planning. In this paper, a three-level model is suggested to solve the optimal sizing problem of networked MGs considering both resilience and cost. In the first level, a meta-heuristic technique based on an adaptive genetic algorithm (AGA) is utilized to tackle the normal sizing problem, while a time-coupled AC OPF is utilized to capture stability properties for accurate decision-making. The second and third levels are combined as a defender-attacker-defender model. In the former, the suggested AGA is utilized to generate attacking plans capturing load profile uncertainty and contingencies for load shedding maximization, while a multi-objective optimization problem is suggested for the latter to obtain a trade-off between cost and resilience. Simulations considering meshed networks and load distinction into critical and non-critical are developed to demonstrate algorithm effectiveness on capturing resilience at the planning stage and optimally sizing multiple parameters. The results indicate that higher resilience levels lead to higher investment cost, while sizing networked MGs leads to decreased investment in comparison with standalone MGs sizing. [ABSTRACT FROM AUTHOR]

This paper derives the maximum achievable sum-rate and presents the optimal encoding/decoding framework for rate-diverse wireless network coding (RD-WNC) over broadband channels consisting of multiple parallel subchannels. RD-WNC applies to a communication scenario in which a base station wants to deliver two different messages with different rates to two users. The base station combines the two separate messages into one network-coded message and broadcasts the network-coded message to both users. Each user then extracts its desired message from the network-coded message by subtracting from it the other message, which we assume to be side information available to the user. Deriving the maximum achievable sum-rate for RD-WNC is challenging when the channel consists of multiple parallel subchannels with different channel coefficients (e.g., the subcarrier channels of OFDM systems), since apart from the rate allocation between the two users, optimal power allocation among multiple subchannels needs to be identified. The first contribution of this paper is a new “mountain-leveling” power allocation algorithm to achieve the maximum sum-rate. With the resulting power allocation, we can then achieve the corresponding optimal sum-rate by having a separate encoding/decoding mechanism for each subchannels, but doing so is cumbersome and complex when the number of subchannels is large. The second contribution of this paper is a practical encoding/decoding framework using only one encoder-decoder mechanism for all subchannels without sacrificing sum-rate optimality. We provide numerical results to corroborate our theoretical findings and to demonstrate the benefits of our encoding/decoding framework. [ABSTRACT FROM AUTHOR]

In an interesting paper, Prof. C. Ding provided three constructions of cyclic codes of length being a product of two primes. Numerical data shows that many codes from these constructions are best cyclic codes of the same length and dimension over the same finite field. However, not much is known about these codes. In this paper, we explain some of the numerical data by developing a general method on cyclic codes of composite length and on estimating the minimum distance. We also provide a general construction of cyclic codes of composite length which are related to Ding’s constructions. Numerical data shows that it produces many best cyclic codes as well. Finally, we point out how these cyclic codes can be used to construct convolutional codes with large free distance. [ABSTRACT FROM AUTHOR]

List decoding of insertions and deletions in the Levenshtein metric is considered. The Levenshtein distance between two sequences is the minimum number of insertions and deletions needed to turn one of the sequences into the other. In this paper, a Johnson-like upper bound on the maximum list size when list decoding in the Levenshtein metric is derived. This bound depends only on the length and minimum Levenshtein distance of the code, the length of the received word, and the alphabet size. It shows that polynomial-time list decoding beyond half the Levenshtein distance is possible for many parameters. Further, we also prove a lower bound on list decoding of deletions with the well-known binary Varshamov–Tenengolts codes, which shows that the maximum list size grows exponentially with the number of deletions. Finally, an efficient list decoding algorithm for two insertions/deletions with VT codes is given. This decoder can be modified to a polynomial-time list decoder of any constant number of insertions/deletions. [ABSTRACT FROM AUTHOR]

Energy management strategy (EMS) is the key to the performance of fuel cell / battery hybrid system. At present, reinforcement learning (RL) has been introduced into this field and has gradually become the focus of research. However, traditional EMSs only take the energy consumption into consideration when optimizing the operation economy, and ignore the cost caused by power source degradations. It would cause the problem of poor operation economy regarding Total Cost of Ownership (TCO). On the other hand, most studied RL algorithms have the disadvantages of overestimation and improper way of restricting battery SOC, which would lead to relatively poor control performance as well. To solve these problems, this paper establishes a TCO model including energy consumption, equivalent energy consumption and degradation of power sources at first, then adopt the Double Q-learning RL algorithm with state constraint and variable action space to determine the optimal EMS. Finally, using hardware-in-the-loop platform, the feasibility, superiority and generalization of proposed EMS is proved by comparing with the optimal dynamic programming and traditional RL EMS and equivalent consumption minimum strategy (ECMS) under both training and unknown operating conditions. Results prove that the proposed strategy has high global optimality and excellent SOC control ability regardless of training or unknown conditions. [ABSTRACT FROM AUTHOR]

Periodicity is a frequently happening phenomenon for social interactions in temporal networks. Mining periodic communities are essential to understanding periodic group behaviors in temporal networks. Unfortunately, most previous studies for community mining in temporal networks ignore the periodic patterns of communities. In this paper, we study the problem of seeking periodic communities in a temporal network, where each edge is associated with a set of timestamps. We propose novel models, including $\sigma$ σ -periodic $k$ k -core and $\sigma$ σ -periodic $k$ k -clique, that represent periodic communities in temporal networks. Specifically, a $\sigma$ σ -periodic $k$ k -core (or $\sigma$ σ -periodic $k$ k -clique) is a $k$ k -core (or clique with size larger than $k$ k ) that appears at least $\sigma$ σ times periodically in the temporal graph. The problem of searching periodic core is efficient but the resulting communities may be not enough cohesive; the problem of enumerating all periodic cliques is not efficient (NP-hard) but the resulting communities are very cohesive. To compute all of them efficiently, we first develop two effective graph reduction techniques to significantly prune the temporal graph. Then, we transform the temporal graph into a static graph and prove that mining the periodic communities in the temporal graph equals mining communities in the transformed graph. Subsequently, we propose a decomposition algorithm to search maximal $\sigma$ σ -periodic $k$ k -core, a Bron-Kerbosch style algorithm to enumerate all maximal $\sigma$ σ -periodic $k$ k -cliques, and a branch-and-bound style algorithm to find the maximum $\sigma$ σ -periodic clique. The results of extensive experiments on five real-life datasets demonstrate the efficiency, scalability, and effectiveness of our algorithms. [ABSTRACT FROM AUTHOR]

Flexible DC distribution networks have been widely developed because of their advantages of high efficiency, low cost, and easy access to renewable energy. However, as distribution networks have more ends than the two-terminal transmission line, it is more challenging to protect them and locate their faults. Therefore, this paper proposes a modified T-source circuit breaker to protect against DC faults. Based on the proposed circuit breaker, an integral fault location method using double-terminal asynchronous data is proposed. The accuracy of the algorithm is not affected by the fault resistance. There are no differential terms in the algorithm, which greatly reduces the sensitivity to noise. The integral algorithm can remain steady when the voltage and current are zero in oscillation and attenuation periods. This constitutes the main contribution of this paper. Finally, it is verified by simulation and experiment that the proposed circuit breaker can isolate the power source within a short time in the typical DC distribution network. Under a noise of 30 dB for simulation, the location error of the proposed algorithm is <0.4% when the fault resistance is 0.5 Ω–500 Ω. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the convergence speed of the Arimoto-Blahut algorithm. For many channel matrices, the convergence speed is exponential, but for some channel matrices it is slower than exponential. By analyzing the Taylor expansion of the defining function of the Arimoto-Blahut algorithm, we will make the conditions clear for the exponential or slower convergence. The analysis of the slow convergence in this paper is new. Based on this analysis, we will compare the convergence speeds of the Arimoto-Blahut algorithm numerically with the values obtained in our theorems for several channel matrices. The purpose of this paper is to obtain a complete understanding of the convergence speed of the Arimoto-Blahut algorithm. [ABSTRACT FROM AUTHOR]

This paper presents a nonlinear dynamic simulation model of an ultracapacitor (UC) bank and the associated control system. The control system at hand consists of two levels: the lower level controls the inverter of the UC bank, while the upper control level is responsible for providing charging/discharging active power set points to be followed by the lower control level. This paper focuses on the development of the upper control level for frequency control. Specifically, two simulation case studies are developed so as to assess the performance of the proposed control framework. In the first case study the upper control level is developed using a classical Proportional-Integral-Derivative (PID) controller. In the second case study the upper control level is devised using a Model Predictive Control (MPC) algorithm based on internal linear prediction model of a nonlinear UC bank. In both cases, a nonlinear UC bank simulation model is used. The simulation case studies are modelled and tested in Matlab/Simulink. The response of the MPC-controlled UC bank is compared to the 3 existing PID-control algorithms for frequency control. The simulation results show that the MPC algorithm outperforms the conventional PID controllers. [ABSTRACT FROM AUTHOR]

This paper proposes a novel inertia-enhanced distributed control method to complement the inertia of microgrids. The rate of change of frequency (RoCoF) and the rate of change of voltage (RoCoV) are employed in this paper to quantify the frequency inertia and voltage inertia, respectively. Then, a fully distributed algorithm with constrained changing rates is proposed. By bounding the changing rates of frequency and voltage during the consensus control, the algorithm can address the consensus problem while enhancing the inertia of microgrids. Compared with most inertia control methods, the proposed method can utilize the reserve power of scattered DGs to supply inertia. Besides, it performs better under disturbances and delays than conventional distributed control methods. The effectiveness of the proposed method is validated by several cases in MATLAB/Simulation and a hardware experiment. [ABSTRACT FROM AUTHOR]

This paper proposes on-driving experience sharing algorithms at junctions in infrastructure-assisted vehicles-to-everything networks. For the purpose, a millimeter-wave (mmWave) technology is used because it provides multi-Gbps data rates which is helpful for handling users’ short stay times at junctions and spatial reuse due to high beam directionality which is helpful for interference-avoidance among densely deployed vehicles at junctions. To realize on-driving experience sharing, the proposed algorithms focus on joint resource allocation and scheduling for 3GPP-compliant multiple unicast vehicle-to-vehicle (V2V) communications where the vehicles are group leaders (GLs) in 3GPP Mode 4(d). The resource allocation stands for the roadside unit (RSU) allocation to scheduled V2V GL links where RSU is essentially required for overcoming blockage by establishing two-hop relaying. Because vehicles stay for short times at junctions, this paper designs two algorithms without or with delay considerations. Without delay considerations, the joint optimization of RSU allocation and scheduling was originally formulated as mixed 0-1 non-convex optimization. However our proposed algorithm reformulates the problem into mixed 0-1 convex optimization, which is computationally easier to solve. With delay considerations, our proposed algorithm dynamically controls video contents frame rates for time-average on-driving video sharing quality maximization subject to delay constraints, inspired by Lyapunov optimization. Extensive simulation results demonstrate that our algorithms can significantly outperform in a variety of scenarios. Furthermore, we conduct the cost analysis for the proposed algorithms in terms of capital expenditure (CAPEX) and operating expenditure (OPEX). [ABSTRACT FROM AUTHOR]

The state-dependent Gaussian interference channel (IC) and Z-IC are investigated, in which two receivers are corrupted by the same but differently scaled states. The state sequence is noncausally known at both transmitters, but not known at either receiver. Three interference regimes are studied, i.e., the very strong, strong, and weak regimes. In the very strong regime, the capacity region is characterized under certain channel parameters by designing a cooperative dirty paper coding between the two transmitters to fully cancel the state. In the strong regime, points on the capacity region boundary are characterized under certain channel parameters by designing an achievable scheme based on rate splitting, layered dirty paper coding, and successive state cancellation. In the weak regime, the sum capacity is obtained by independent dirty paper coding at two transmitters. For all the above regimes, the capacity achieves that of the IC/Z-IC without state. Comparison between the state-dependent regular IC and the Z-IC suggests that even with one interference-free link, the Z-IC does not necessarily perform better, because dirty paper coded interference in the regular IC facilitates to cancel the state through the cooperative dirty paper coding between the transmitters. [ABSTRACT FROM AUTHOR]

The new generation of the high-efficiency video coding (HEVC) video coding standard has improved compression performance and brought considerable coding complexity. Therefore, reducing the perception redundancy of video to obtain a better compression effect is the new direction of video development at present. In this paper, the HEVC is improved and enhanced from the aspects of a video saliency algorithm based on an attention mechanism and a video compression algorithm based on perception priority. In terms of video saliency, this paper proposes a spatial saliency algorithm based on a convolutional neural network and a temporal saliency algorithm based on motion vector. The saliency algorithm can combine the motion estimation results of each block during the HEVC compression on the basis of convolutional neural network and carry out adaptive dynamic fusion of the two, to complete the saliency map of the input video. In the aspect of the video compression algorithm with perception priority, this paper proposes a more flexible QP selection method, which selects its corresponding QP according to the saliency value of CU. At the same time, we propose a new rate-distortion optimization algorithm, which integrates the current block’s saliency feature into the traditional rate-distortion calculation method, to guide the allocation of bits and achieve the purpose of perception priority. The experimental results proved the superiority of the proposed method over the state-of-the-art perceptual coding algorithms in terms of saliency detection and perceptual compression quality. [ABSTRACT FROM AUTHOR]

Collaborative control of power converters operating in microgrids with unbalanced single-phase loads is difficult to achieve, considering that the voltages and currents have positive-, negative-, and zero-sequence components. In this paper, a new control scheme for collaborative control of four-leg microgrids is proposed. The main advantage of the proposed methodology is simplicity, because the sharing of the powers produced by the positive-, negative-, and zero-sequence voltage and currents is simple to achieve using the easy to implement and well-known droop control algorithms, i.e., as those based on $P$ – $\omega$ and $Q$ – $v$ droop control. The proposed droop algorithms do not require high bandwidth communication channels and the application of virtual impedances, whose design usually demands extensive simulation work, is not required. Three secondary control systems are also analyzed, discussed, and implemented in this paper to regulate the frequency, voltage, and phase at the point of common coupling (PCC), to achieve a balanced 50-Hz three-phase voltage supply in the PCC during steady-state operation. For these secondary control systems, single-phase phase-locked loop based on quadrature signal generators are implemented. Small signal modeling and design are discussed in this paper. A microgrid prototype of $\approx$ 5 kW, implemented using two power converters of 3 kW (each), is used to experimentally validate the proposed algorithms. [ABSTRACT FROM AUTHOR]

This paper deals with stabilization of an ideal transformer model (ITM) circuit, used as an interfacing algorithm for hardware-in-the-loop simulations. The ITM allows for the distribution of simulation model computations over multiple processors or can be used in power hardware-in-the-loop simulations. When specific impedance conditions of the partitioned circuit are not met, this interfacing algorithm becomes unstable. This paper first presents a new theoretical approach for representing the ITM interfacing algorithm that is based on delay differential equations. With a stability analysis of the obtained time-delay system, a stabilization method is proposed, which increases the stability boundaries of the ITM algorithm. Simulation examples, including the scenario of a two-level inverter system, are provided. [ABSTRACT FROM AUTHOR]

In this paper, we consider the development of algorithms for the automatic detection of buried threats using ground penetrating radar (GPR) measurements. GPR is one of the most studied and successful modalities for automatic buried threat detection (BTD), and a large variety of BTD algorithms have been proposed for it. Despite this, large-scale comparisons of GPR-based BTD algorithms are rare in the literature. In this paper, we report the results of a multi-institutional effort to develop advanced BTD algorithms for a real-world GPR BTD system. The effort involved five institutions with substantial experience with the development of GPR-based BTD algorithms. In this paper, we report the technical details of the advanced algorithms submitted by each institution, representing their latest technical advances, and many state-of-the-art GPR-based BTD algorithms. We also report the results of evaluating the algorithms from each institution on the large experimental data set used for development. The experimental data set comprised 120 000 m2 of GPR data using surface area, from 13 different lanes across two U.S. test sites. The data were collected using a vehicle-mounted GPR system, the variants of which have supplied data for numerous publications. Using these results, we identify the most successful and common processing strategies among the submitted algorithms, and make recommendations for GPR-based BTD algorithm design. [ABSTRACT FROM AUTHOR]

This paper examines the problem of predictive gear scheduling for fuel consumption minimization in connected/automated heavy trucks. The literature highlights the fuel economy benefits of such predictive scheduling, but there is a need to optimize such scheduling online, in real time. To address this need, we begin by using dynamic programming (DP) to schedule gear shifting offline, in a manner that achieves a globally optimal Pareto tradeoff between the conflicting objectives of minimizing fuel consumption and shift frequency. The computational cost of DP is unfavorable for online implementation, but we present two algorithms addressing this challenge. Both algorithms rely on the fact that in the Pareto limit where fuel consumption minimization is the sole objective, DP furnishes a simple static shift map. Our first algorithm trains a recurrent neural network to prune the shift schedule generated by this map. The second algorithm performs this pruning in a direct manner tailored to reduce the schedule's rain flow count. We simulate these algorithms for different drive cycles. Both algorithms achieve a reasonable tradeoff between fuel consumption and gear shift frequency. However, the rain flow count algorithm is both more effective in approaching the DP-based Pareto front and more computationally efficient. [ABSTRACT FROM AUTHOR]

Unavoidably, the controlsystem of any permanent magnet synchronous motor (PMSM) is subjected to perturbations, e.g., motor nonidealities and inverter nonlinearities. To reject these perturbations, a new super-twisting (ST) control variant, called speed adaptive super-twisting (S-AST) control, is proposed in this paper. In the S-AST control, a proportional-integral (PI) and a ST controllers are merged using an adaptive law that is based on the motor speed measurement. This is done to reduce the chattering problems that the standard ST control presents. In addition, a mathematical design for the S-AST control is proposed, where the relationship between the chattering amplitude, the switching frequency and the system perturbations is shown. The main contribution in this paper is the application of the S-AST controller to reduce the total harmonic distortion (THDi) of the PMSM currents. By comparing the S-AST control against PI control, the THDi is reduced from 9.9% to 1.27%, in simulation, and the THDi is reduced from 22.79% to 1.56%, experimentally. These results demonstrate how the S-AST control is an excellent alternative to improve the waveform of the PMSM currents. [ABSTRACT FROM AUTHOR]

As an algorithmic framework, message passing is extremely powerful and has wide applications in the context of different disciplines including communications, coding theory, statistics, signal processing, artificial intelligence and combinatorial optimization. In this paper, we investigate the performance of a message-passing algorithm called min-sum belief propagation (BP) for the vertex-disjoint shortest $k$ -path problem ($k$ -VDSP) on weighted directed graphs, and derive the iterative message-passing update rules. As the main result of this paper, we prove that for a weighted directed graph $G$ of order $n$ , BP algorithm converges to the unique optimal solution of $k$ -VDSP on $G$ within $O(n^{2}w_{max})$ iterations, provided that the weight $w_{e}$ is nonnegative integral for each arc $e\in E(G)$ , where $w_{max}=\max \{w_{e}: e\in E(G)\}$. To the best of our knowledge, this is the first instance where BP algorithm is proved correct for NP-hard problems. Additionally, we establish the extensions of $k$ -VDSP to the case of multiple sources or sinks. [ABSTRACT FROM AUTHOR]

In this paper, we consider the problem of learning undirected graphical models from data generated according to the Glauber dynamics (also known as the Gibbs sampler). The Glauber dynamics is a Markov chain that sequentially updates individual nodes (variables) in a graphical model and it is frequently used to sample from the stationary distribution (to which it converges given sufficient time). Additionally, the Glauber dynamics is a natural dynamical model in a variety of settings. This paper deviates from the standard formulation of graphical model learning in the literature, where one assumes access to independent identically distributed samples from the distribution. Much of the research on graphical model learning has been directed toward finding algorithms with low computational cost. As the main result of this paper, we establish that the problem of reconstructing binary pairwise graphical models is computationally tractable when we observe the Glauber dynamics. Specifically, we show that a binary pairwise graphical model on p nodes with maximum degree d can be learned in time f(d)p^2\log p , for a function f(d) defined explicitly in this paper, using nearly the information-theoretic minimum number of samples. [ABSTRACT FROM AUTHOR]

Non-uniform constellation (NUC) is an advanced technology in digital terrestrial television broadcasting (DTTB) systems to reduce the shapping gap of BICM capacity to Shannon theoretical limit and provide performance gain. Two-dimensional NUC (2D-NUC) is a kind of NUC providing more gain but bringing higher demapping complexity at the receiver, which hinders its application prospects, especially in power limited systems. This paper proposes three novel demapping algorithms with reduced complexity for low to medium code rate 2D-NUCs in Advanced Television Systems Committee 3rd Generation (ATSC 3.0) standard. The proposed algorithms are based on the introduction of virtual points, the strategy of condensed symbols reduction and some reasonable approximations. There is a trade-off between the demapping complexity and performance. These three algorithms have different degrees of reduction in complexity and performance degradation, so they accommodate for different practical requirements. Theoretical analysis and simulation results are also given in this paper to prove the efficiency of the proposed demapping algorithms with reduced complexity. [ABSTRACT FROM AUTHOR]

This paper addresses the estimation and compensation of I/Q imbalance, one of the most prominent impairments found in wideband zero-intermediate frequency transceivers (TRxs). The I/Q imbalance encountered in this kind of TRx comprises not only frequency-selective gain and phase imbalance but also delay imbalance. Unless appropriate compensation is applied, the I/Q imbalance significantly degrades the performance of a communication system. This paper presents a novel compensation technique for transmitter I/Q imbalance based on built-in-self-calibration, a low cost and robust compensation technique that enables manufacturing as well as in-field calibration with low computational complexity. The method’s performance is evaluated in a TRx with 64-quadratic-amplitude modulation and 2 GHz of bandwidth implemented with real hardware. The measurements show that the proposed technique achieves an image rejection ratio greater than 35 dB in the entire 2 GHz bandwidth and an error vector magnitude lower than 3%. [ABSTRACT FROM PUBLISHER]

Network partition in complex power networks is essential for the var-voltage control. Traditional partition methods such as Ward method are applied in practical power networks, but they are unable to evaluate the quality of partition results. Moreover, they lack efficiency when dealing with large-scale networks. Since complex operation characteristics and topology have emerged in recent power systems, the power grid partition requires higher efficiency and quality. Therefore, this paper proposes a fast network partition method with a balanced-depth-based community detection algorithm. Its aim is to significantly improve the efficiency of partition while maintaining high quality of partition, with which the inter-zone coupling is minimized while the intra-zone coupling is maximized. In the meantime, a surrogate-optimization-based selection algorithm is proposed to select the zonal pilot bus, based on which the secondary voltage control method is used to evaluate the quality of partition. Results from four case studies conducted in various power networks with different sizes, as compared to other partition methods, validate the high efficiency and high quality of the proposed power grid partition approach. [ABSTRACT FROM AUTHOR]

Many big data applications produce a massive amount of high-dimensional, real-time, and evolving streaming data. Clustering such data streams with both effectiveness and efficiency are critical for these applications. Although there are well-known data stream clustering algorithms that are based on the popular online-offline framework, these algorithms still face some major challenges. Several critical questions are still not answer satisfactorily: How to perform dimensionality reduction effectively and efficiently in the online dynamic environment? How to enable the clustering algorithm to achieve complete real-time online processing? How to make algorithm parameters learn in a self-supervised or self-adaptive manner to cope with high-speed evolving streams? In this paper, we focus on tackling these challenges by proposing a fully online data stream clustering algorithm (called ESA-Stream) that can learn parameters online dynamically in a self-adaptive manner, speedup dimensionality reduction, and cluster data streams effectively and efficiently in an online and dynamic environment. Experiments on a wide range of synthetic and real-world data streams show that ESA-Stream outperforms state-of-the-art baselines considerably in both effectiveness and efficiency. [ABSTRACT FROM AUTHOR]

The papers in this special section were presented at the IEEE Computer Vision and Pattern Recognition (CVPR), June, 2014, jointly sponsored by the IEEE and the Computer Vision Foundation. [ABSTRACT FROM PUBLISHER]