Search

• Seismic design parameters are proposed for the Moment-resisting Knee-braced Frame. • The study is carried out within the framework of Canadian standards. • All potential hazard sources expected on the Canadian west coast are considered. • The MKF shall be designed as a moderately ductile system. • Overstrength and ductility factors of 1.6 and 3.0 are proposed for the MKF system. • The proposed seismic design parameters are verified by comprehensive nonlinear analyses. This paper proposes and verifies the seismic design parameters, including overstrength-related force modification factor, ductility-related force modification factor, deflection amplification factor, and design period, for the steel Moment-resisting Knee-braced Frame (MKF) system. The building selected in this study is an office located in Vancouver, British Columbia, Canada, in which MKFs act as the lateral load-resisting system. 14 prototype frames spanning a wide range of geometrical configurations are designed following the requirements of the 2015 National Building Code (2015 NBC) of Canada. Nonlinear static analyses are carried out on the prototype frames to determine the preliminary ductility and overstrength factors. Six new MKFs (assessment frames) are designed using the proposed overstrength and ductility factors, and their seismic and collapse performances are examined by comprehensive numerical analyses, considering the effects of the potential sources of ground motion expected on the Canadian west coast, namely subduction intraslab, subduction interface and shallow crustal events. The results of this study suggest that the MKF system shall be designed as a moderately ductile system using overstrength and ductility factors of 1.60 and 3.0, respectively, with a height not exceeding 40 m in regions of high seismicity. [ABSTRACT FROM AUTHOR]

This paper advances a framework for evaluating mesh sensitivity in numerical models of systems involving strain-weakening materials, and demonstrates its application in the case study of the failure at the Mount Polley TSF in Canada. Numerical studies are combined with analytical arguments and physical evidence to establish that this failure was caused in part by the localisation of strain in a shear band with a thickness 0 < h sb ≤ 12.5 cm, and to rule out the possibility of slippage along a pre-sheared plane in the foundation. The range of model responses is bound by an upper limit representing the least conservative case of "no weakening," and a lower limit representing the most conservative case of strain localisation within an infinitely thin shear band, predicting the highest and the lowest stability levels, respectively. The limit states are discoverable using a new method presented here. The model's convergence is shown to vary at mesh discretisation levels above the minimum established by the upper limit state analysis; higher mesh resolutions yield lower stability levels, approaching asymptotically the floor value established by the lower limit state analysis. A conceptual relationship between a model's discretisation, the shape of the strain-weakening curve and convergence is formulated. [ABSTRACT FROM AUTHOR]