Search

The squeezed multiple-branch pile is a variable section pile that was built by adding a bearing branch cavity to a constant section pile using expansion and extrusion equipment. It is widely used in engineering practice for its high bearing capacity, small settlement deformation, high economic benefits, strong adaptability, and simple pile forming process. In this paper, a new type of squeezed multiple-branch pile is proposed and its forming tool is invented. The forming tool of the pile has applied for an invention patent and is authorized by the China National Intellectual Property Administration. Multiple groups of comparison models of the new squeezed multiple-branch piles are established by using FLAC3D numerical simulation software to investigate the influence of the number and spacing of branches on the bearing mechanism in response to uplift load. The results indicated that the number and spacing of branches have a significant effect on the uplift bearing capacity, load–displacement curves, side friction resistance, and stress distribution law in the new pile and soil around the pile. The suitable number and spacing of branches maximize the uplift bearing capacity and minimize the settlement of a single pile. [ABSTRACT FROM AUTHOR]

With the increasing depth of coal mining and expanding mining scale, the rocks surrounding deep roadways are in a complex mechanical condition of frequent dynamic disturbance. The heterogeneity has an important influence on rock mass failure under dynamic loads. Therefore, it is necessary to study the deformation and failure of heterogeneous roadway under dynamic load. In this paper, the effect of heterogeneity on stability of roadway under static and different dynamic loads is studied. According to the results, the effect of rock mass heterogeneity on the deformation and failure of surrounding rock varies with different degrees of heterogeneity. Under static loading conditions, the stability of roadway is negatively correlated with the degree of heterogeneity of the rock mass. Under dynamic loading conditions, the change of heterogeneity degree has significant influence on the stability of surrounding rock. With the increase in dynamic load strength, the change in variation difference in the average value of roof sag, stress distribution, and plastic zone caused by variations in heterogeneity will increase. This study contributes to understanding the deformation and failure characteristics of heterogeneous roadways under dynamic loads and can be used to analyze heterogeneous roadways under dynamic loads. [ABSTRACT FROM AUTHOR]

In this study, a detailed analysis was conducted to evaluate the impacts of the deviatoric stress component and spherical stress component on the stability of surrounding rocks in the roadway via the theoretical analysis and calculation and numerical simulation. Based on the analysis, the distribution laws guiding the main stress differences, plastic zone, convergence of surrounding rocks, and third invariant of stress under various conditions (such as equal spherical stress and unequal deviatoric stress and equal deviatoric stress and unequal spherical stress) were developed, providing an optimization scheme for roadway support misunderstanding under the conditions of high spherical stress field and high deviator stress field. The study further reveals that under the circumstance of the constant spherical stress, the greater the deviatoric stress, the plastic zone range of the surrounding rock of the roadway, the range of tensile deformation of the surrounding rock, the amount of convergence of the surrounding rock, the probability of separation of the roof and floor of the roadway, and the principal stress difference and the main stress, the greater the concentration range of the maximum stress difference is, and the maximum principal stress difference is mainly concentrated in the roof and floor rocks of the roadway, and the greater the deviatoric stress, the greater the probability that the roof and floor rocks of the roadway will be separated, and the maximum principal stress difference is mainly concentrated in the roof and floor rocks of the roadway, the greater the deviator stress, the greater the concentration range of the maximum value of the principal stress difference and the principal stress difference; when the deviator stress is constant, the range of the plastic zone and the maximum principal stress difference concentration range of the surrounding rock of the roadway decrease with the increase of the ball stress, and the principal stress difference, the amount of convergence of the surrounding rock, and the range of tensile deformation increase with the increase of the ball stress. The maximum principal stress difference is mainly concentrated in the roof and floor rocks of the roadway. The principal stress difference increases with the increase of the spherical stress, and the maximum concentration range of the principal stress difference decreases with the increase of the spherical stress. After the method proposed in this paper optimizes the actual roadway support on site, the surrounding rock deformation of the roadway is small and the control is relatively ideal, which basically meets the engineering needs. [ABSTRACT FROM AUTHOR]

Faulting would result in ground deformation and even damage to the tunnel structure. Thus, special structural designs should be made when the tunnel passes through an active fault. A single-track railway tunnel crossing a reverse fault is used to study the suitable structure type. In this paper, antidislocation structural measures such as reasonable segment length of articulated lining, cross-section shape, and thickness of lining are discussed through the numerical simulation. Firstly, the rational segment length of the articulated lining is confirmed. Stress and deformation behavior of articulated lining are also analyzed after the fault move. Then, the antifault effect of two kinds of cross-section shapes and three different lining thicknesses are compared. Researches show that the segment length of the articulated lining could be confirmed by the longitudinal distribution of maximum bending moment of lining after faulting. There are apparent stress concentrations occurring in the lining segment crossing the fault plane, and serious damage appears in the vault and wall waist of the tunnel. The horseshoe section with big curvature inverted arch is recommended to a single-track railway tunnel across an active fault. Simply increasing lining thickness is not suggested in a tunnel structure design crossing the active fault. The size of tunnel expansion and the minimum length of segment across fault plane can be geometrically determined according to fault dislocation magnitude and dip angle. [ABSTRACT FROM AUTHOR]