Search

This article proposes three-phase cascaded multilevel rectifiers for wind energy conversion system applications. These configurations operate as machine-side converters and play an essential role in the integration of wind power generation units. The proposed rectifiers are connected to a permanent magnet synchronous machine by an open-end winding arrangement, making the ac–dc conversion of the power delivered with high-power factor operation. Their structures are composed of a combination of a converter based on Vienna rectifiers and one H-bridge per phase with a floating capacitor. Compared with the conventional configurations, the proposed ones provide sinusoidal currents with lower harmonic distortion using, proportionally, a fewer number of controlled switches. Furthermore, they can operate with a lower switch blocking voltage. These features make them attractive options for industrial applications due to their good performance, providing an interesting cost–benefit. The system model, pulsewidth modulation technique, capacitor voltage balancing, and control strategy are detailed. Computer simulations and experimental tests are provided in order to validate their feasibility. [ABSTRACT FROM AUTHOR]

This article proposes three-phase configurations for wind energy conversion system applications. The proposed topologies are based on Vienna rectifiers and they have a reduced number of controlled switches, which may allow reducing size and costs. Despite they can work with other arrangements, the proposed structures operate at an open-end winding configuration in this article, providing some benefits over the traditional ones. Compared to the conventional topology, the proposed ones provide a better power quality employing, proportionally, a fewer number of controlled switches, offering a higher levels-per-switch ratio. Moreover, they can also operate at a lower switch blocking voltage. These features offer an interesting cost–benefit and make them attractive options to industry applications. The system model, modulation technique, and control strategy are discussed. Simulation and experimental results are provided in order to validate their performance and feasibility. [ABSTRACT FROM AUTHOR]

Neutral-point (NP) voltage imbalance is an inherent issue of three-level converters. The alternating input current distortion is generated by using the conventional discontinuous pulsewidth modulation (DPWM) scheme without NP voltage balance control. In this article, the deviation vector between the synthesis vector and the reference vector, which is the fundamental cause of alternating input current distortion under NP voltage unbalance conditions, is revealed. Then, by optimizing the subsector division and the switching state sequence, a dynamic-space-vector DPWM (DSV-DPWM) is proposed to eliminate the deviation vector. Further, the comparisons of the proposed DSV-DPWM, the conventional DPWM, and an existing triangle carrier-based DPWM (TCB-DPWM), are addressed. Finally, a 10-kW prototype was built to verify the effectiveness of the proposed DSV-DPWM scheme. Experimental results show that, compared with the conventional DPWM scheme and the TCB-DPWM scheme, both the current THD performance and efficiencies can be significantly improved by the proposed DSV-DPWM scheme under unbalanced NP voltage conditions. [ABSTRACT FROM AUTHOR]