Search

In this paper, a new modulation strategy based on the carrier-based switching strategy for the non-square direct matrix converters (MC) is proposed to control the active power of distributed generation (DG) units. In this strategy, the active power of DGs is controlled by the central input current control of the non-square direct MC independent from the voltage and frequency. Conventionally, each DG has a converter, and for supplying a load with N number of DGs, N number of converters are needed and each converter has its own modulation switching and control strategy to control the power output of each DG. Needless to say, in a microgrid with N number of DGs, the control strategy of each converter has more complex structure than that of a microgrid with one converter, and surely the former strategy entails more volume and price. Using the proposed converter in this paper, it is possible to supply a load with N number of DGs through one converter. Also, the power outputs of all DGs are controlled by a central control strategy. The proposed central control strategy is described and simulated for a typical microgrid. Experimental and simulation results validate the effectiveness of the proposed converter and the proposed strategy. The results demonstrate the applicability and efficiency of the system and verify the theoretical analysis. [ABSTRACT FROM AUTHOR]

Most microgrid protection schemes found in published literature suffer from a lack of generality in that they work well for the assumed topology, including type and placement of sources. Other generic protection schemes tend to be too complicated, too expensive, or both. To overcome these drawbacks, a topology-agnostic, scalable, and cost-aware protection based on fundamental principles that work in the presence of high penetration of inverter-based resources (IBRs) is developed and tested in this paper. The protection system also implements stable automatic reconfiguration of the healthy sections of the system after clearance of fault, thus increasing resilience by self-healing. To achieve this ambitious goal, stable inverter models are developed that operate in unbalanced networks in grid-connected and islanded modes, even with 100% IBRs, share power without conflicting controls, and can ride through faults while limiting fault currents. The scheme is tested for primary and backup protection and reconfiguration on the IEEE 123-node feeder in grid-connected and islanded modes with 15 IBRs connected to the system. [ABSTRACT FROM AUTHOR]

Line-switching operations introduce several concerns to microgrid operators since they trigger reliability and power quality issues in addition to increasing the wear and tear cost of switching devices. This paper proposes a novel methodology for achieving seamless line-switching in low-inertia islanded microgrids. The proposed methodology aims at mitigating the detrimental line-switching impacts by minimizing the power flow in the switched lines at the moments of executing the switching operations. The minimization of the power flow is realized by optimizing the droop control parameters of the DGs during the transition from one network topology to another. Besides, during executing a series of line-switching operations, the sequence of switching is also optimized to minimize the total switched power. While optimizing the line-switching execution sequence, the transitional droops are optimized for each line-switching operation within that sequence. A dynamic mixed-integer nonlinear programming problem is formulated to find both the optimized dynamic transitional droops and line-switching sequence simultaneously. Simulation results demonstrate the effectiveness of the proposed seamless line-switching methodology where the switched power can be reduced by more than 80% for a single line-switching operation and 54% considering a series of four switch exchanges in addition to achieving several instances of zero-current switching. As a result, a significant decrease in the peak of voltage transients has been recorded for some cases. [ABSTRACT FROM AUTHOR]