Search

Summary Multilevel inverters are known as essential converters in renewable sources. First, in this paper, a new submodule is presented, and based on it, a new sub‐multilevel inverter is presented. The proposed sub‐multilevel inverter consists of several unidirectional and bidirectional switches and DC voltage sources. Then, the generalized topology, developed in two modular and cascaded modes, is presented to increase production levels. The proposed submodules are connected in series in the modular topology, increasing production levels. The proposed topology to produce the maximum output levels has the minimum number of IGBTs, drivers, DC voltage sources, etc. Mathematical analyses for conduction and switching losses are provided, and mathematical analyses for the number of devices and voltage across the switches are also presented. In addition to the mathematical analysis of losses, the simulation results are also presented. A general comparison of proposed topology components is presented to demonstrate their advantages. This comparison shows that the proposed topology has the minimum number of power electronic devices. In this paper, nearest level modulation is used to control the proposed topology. The simulation and experimental results of the proposed sub‐multilevel verify the performance of the proposed topology. [ABSTRACT FROM AUTHOR]

The application of electrochemical cells as a source unit of electrical energy is rapidly growing—used in electric vehicles and other electric mobility devices, as well as in energy supply systems—as energy storage, often together with renewable energy sources. The key element of such systems is the power electronic converter used for DC energy storage and AC grid interfacing. It should be bidirectional to charge and discharge the battery when it is necessary. Two-stage battery interface converters are the most common; their DC-DC stage controls the battery current and adjusts voltage, but the DC-AC stage (inverter or frontend) controls the current in the grid. The use of unfolding inverters in two-stage battery interfaces can have some advantages. In this case, the DC-DC converter produces half-sinewave pulsating voltages and currents, but the unfolding circuit changes the polarity of the voltages and currents and produces no switching losses. Another trend of modern power electronics is the principle of partial power processing. In this case, power electronic converters deal only with a part of the total power; therefore, losses in such converters are reduced. This paper considers combining unfolding frontends with partial power DC-DC converters that enable the further reduction in losses. In this paper, it is shown that such implementation of the partial power conversion principle in semi-DC-AC systems is really possible based on the real-time matching of the voltage of the partial-power DC-DC converter, battery voltage (which depends on its state of charge) and the rectified instantaneous voltage of the AC grid. [ABSTRACT FROM AUTHOR]

As the penetration of distributed generation (DG) systems in the grid is increasing, the challenge of combining large numbers of DGs in the power systems has to be carefully clarified and managed. The control strategy and management concept of the interconnected systems should be flexible and reliable to handle the various types of DGs. This can be suitably met by microgrids. This paper introduces the microgrid structure and elements and states the main objectives that should be achieved by the microgrid controllers and each DG controller in both operation modes (grid‐connected and island mode). It also presents the challenges of having multiple DG units in a microgrid in terms of accurate power control/sharing, voltage and frequency regulation, power management between DGs, different renewable energy sources integration and deployment, seamless mode transfer, and the modeling issues. The centralized and decentralized control techniques as potential solutions have been discussed and compared by highlighting the advantages and disadvantages of each. Furthermore, the recent control techniques for drooped alternating current microgrids and the main proposed solutions and contributions in the literature have been exposed to finally overcome the droop control limitations and obtain a flexible and smart distributed power system. [ABSTRACT FROM AUTHOR]

A Rectangular core–shell (RCS), employed to three fins vertically stacked with gate oxide stack junctionless nanosheet, along with doping and gate/dielectric engineering, is explored. This paper proposes an N-type three fins vertically stacked with gate oxide stack junctionless nanosheet with opposite core doping in the channel referred to as RCS. The simulation results show that three fins vertically stacked with gate oxide stack with RCS junctionless nano-sheet exhibit reduced Ioff is 6.913E-21, increased Ion is 2.408E-07, Ion/Ioff ratio is 0.418×106, DIBL is 6.9mV and SS is 60.65 mV/dec, respectively. Furthermore, the P-type of three fins vertically stacked with gate oxide stack junctionless nanosheet and combined -type and P-type three fins vertically stacked with gate oxide stack junctionless nano-sheet were stimulated to construct the inverter circuit. The Voltage Transfer Characteristics (VTC) of three fins vertically stacked with gate oxide stack junctionless nano-sheet with RCS have HfO2 as the gate-oxide based inverter has been notably improved compared to SiO2, al2O3 as a gate oxide and conventional three fins vertically stacked with gate oxide stack junctionless nano-sheet inverter. [ABSTRACT FROM AUTHOR]

A quadratic converter is now a days being investigated for high boost topologies. This paper presents the quadratic converter-based single-phase grid-connected system. For this system, the DC side control loop is regulated using a symmetrical shoot-through (SST)-based PWM. AC side current controller is implemented by the variation of modulation index in a nearly decoupled manner. The advantage of the suggested system is in terms of several controls particularly for input variations and load changes which are most beneficial in the case of grid application. The experimental results are presented to support the simulation results. The simulation results are achieved using MATLAB/SIMULINK. [ABSTRACT FROM AUTHOR]