Search

Cold plasma treatment is an innovative technology in the food processing and preservation sectors. It is primarily employed to deactivate microorganisms and enzymes without heat and chemical additives; hence, it is often termed a "clean and green" technology. However, food quality and safety challenges may arise during cold plasma processing due to potential chemical interactions between the plasma reactive species and food components. This review aims to consolidate and discuss data on the impact of cold plasma on the chemical constituents and physical and functional properties of major food products, including dairy, meat, nuts, fruits, vegetables, and grains. We emphasize how cold plasma induces chemical modification of key food components, such as water, proteins, lipids, carbohydrates, vitamins, polyphenols, and volatile organic compounds. Additionally, we discuss changes in color, pH, and organoleptic properties induced by cold plasma treatment and their correlation with chemical modification. Current studies demonstrate that reactive oxygen and nitrogen species in cold plasma oxidize proteins, lipids, and bioactive compounds upon direct contact with the food matrix. Reductions in nutrients and bioactive compounds, including polyunsaturated fatty acids, sugars, polyphenols, and vitamins, have been observed in dairy products, vegetables, fruits, and beverages following cold plasma treatment. Furthermore, structural alterations and the generation of volatile and non-volatile oxidation products were observed, impacting the color, flavor, and texture of food products. However, the effects on dry foods, such as seeds and nuts, are comparatively less pronounced. Overall, this review highlights the drawbacks, challenges, and opportunities associated with cold plasma treatment in food processing., (© 2024 The Author(s). Comprehensive Reviews in Food Science and Food Safety published by Wiley Periodicals LLC on behalf of Institute of Food Technologists.)

Conventional food preservation methods such as heat treatment, irradiation, chemical treatment, refrigeration, and coating have various disadvantages, like loss of food quality, nutrition, and cost-effectiveness. Accordingly, cold plasma is one of the new technologies for food processing and has played an important role in preventing food spoilage. Specifically, in-package cold plasma has become a modern trend to decontaminate, process, and package food simultaneously. This strategy has proven successful in processing various fresh food ingredients, including spinach, fruits, vegetables, and meat. In particular, cold plasma treatment within the package reduces the risk of post-processing contamination. Cryoplasm decontamination within packaging has been reported to reduce significantly the microbial load of many foods' spoilage-causing pathogens. However, studies are needed to focus more on the effects of in-package treatments on endogenous enzyme activity, pest control, and removal of toxic pesticide residues. In this review, we comprehensively evaluated the efficacy of in-package low-temperature plasma treatment to extend the shelf life of various foods. The mechanisms by which cold plasma interacts with food were investigated, emphasizing its effects on pathogen reduction, spoilage mitigation, and surface modification. The review also critically assessed the effects of the treatments on food quality, regulatory considerations, and their potential as viable technologies to improve food safety and packaging life. In-package cold plasma treatment could revolutionize food storage when combined with other sophisticated technologies such as nanotechnology., (© 2024 Institute of Food Technologists®.)

The modification in structural, rheological, and techno-functional characteristics of soy and pea protein isolates (SPI and PPI) due to dielectric barrier discharge cold plasma (DBD-CP) were assessed. The increased carbonyl groups in both samples with cold plasma (CP) treatment led to a reduction in free sulfhydryl groups. Moreover, protein solubility of treated proteins exhibited significant improvements, reaching up to 59.07 % and 41.4 % for SPI and PPI, respectively, at 30 kV for 8 min. Rheological analyses indicated that storage modulus (G') was greater than loss modulus (G″) for CP-treated protein gels. Furthermore, in vitro protein digestibility of SPI exhibited a remarkable improvement (4.78 %) at 30 kV for 6 min compared to PPI (3.23 %). Spectroscopic analyses, including circular dichroism and Fourier Transform-Raman, indicated partial breakdown and loss of α-helix structure in both samples, leading to the aggregation of proteins. Thus, DBD-CP induces reactive oxygen species-mediated oxidation, modifying the secondary and tertiary structures of samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Deoxynivalenol (DON) is one of the most common mycotoxins distributed in food and feed, which causes severe liver injury in humans and animals. Cold atmospheric plasma (CAP) has received much attention in mycotoxin degradation due to the advantages of easy operation, high efficiency, and low temperature. So far, the majority of studies have focused on the degradation efficiency and mechanism of CAP on DON, while there is still little information available on the hepatotoxicity of DON after CAP treatment. Herein, this study aimed to investigate the effect of CAP on DON-induced hepatotoxicity both in vitro and in vivo and its underlying mechanisms. The results showed that 120-s CAP treatment achieved 97 % degradation of DON. The vitro hepatotoxicity of DON in L02 cells was significantly reduced with CAP treatment time. Meanwhile, CAP markedly alleviated DON-induced liver injury in mice including the balloon-like degeneration of liver tissues and elevation of AST and ALP level. The underlying mechanism for CAP detoxification of DON-induced hepatotoxicity was further elucidated. The results showed that DON caused severe oxidative stress in cells by suppressing the antioxidant signaling pathway of Nrf2/HO-1/NQO-1, consequently leading to mitochondrial dysfunction and cell apoptosis, accompanied by cellular senescence and inflammation. CAP blocked DON inhibition on the Nrf2/HO-1/NQO-1 signaling pathway through the efficient degradation of DON, accordingly alleviating the oxidative stress and liver injury induced by DON. Therefore, CAP is an effective method to eliminate DON hepatotoxicity, which can be applied in the detoxification of mycotoxin-contaminated food and feed to ensure human and animal health., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

The paper reports a low-cost handheld source of a cold air plasma intended for biomedical applications that can be made by anyone (detailed technical information and a step-by-step guide for creating the NTP source are provided). The plasma source employs a 1.4 W corona discharge in the needle-to-cone electrode configuration and is an extremely simple device, consisting basically of two electrodes and a cheap power supply. To achieve the best bactericidal effect, the plasma source has been optimized on Escherichia coli. The bactericidal ability of the plasma source was further tested on a wide range of microorganisms: Staphylococcus aureus as a representative of gram-positive bacteria, Pseudomonas aeruginosa as gram-negative bacteria, Candida albicans as yeasts, Trichophyton interdigitale as microfungi, and Deinococcus radiodurans as a representative of extremophilic bacteria resistant to many DNA-damaging agents, including ultraviolet and ionizing radiation. The testing showed that the plasma source inactivates all the microorganisms tested in several minutes (up to 10 5 -10 7  CFU depending on a microorganism), proving its effectiveness against a wide spectrum of pathogens, in particular microfungi, yeasts, gram-positive and gram-negative bacteria. Studies of long-lived reactive species such as ozone, nitrogen oxides, hydrogen peroxide, nitrite, and nitrate revealed a strong correlation between ozone and the bactericidal effect, indicating that the bactericidal effect should generally be attributed to reactive oxygen species. This is the first comprehensive study of the bactericidal effect of a corona discharge in air and the formation of long-lived reactive species by the discharge, depending on both the interelectrode distance and the discharge current., (© 2024. The Author(s).)

Nosocomial infections are a serious threat and difficult to cure due to rising antibiotic resistance in pathogens and biofilms. Direct exposure to cold atmospheric plasma (CAP) has been widely employed in numerous biological research endeavors. Nonetheless, plasma-treated liquids (PTLs) formulated with physiological solutions may offer additional benefits such as enhanced portability, and biocompatibility. Additionally, CAP-infused long-lived reactive oxygen and nitrogen species (RONS) such as nitrite (NO 2 - ), nitrate (NO 3 - ), and hydrogen peroxide (H 2 O 2 ) can synergistically induce their antibacterial activity. Herein, we investigated those argon-plasma jet-treated liquids, including Ringer's lactate (RL), phosphate-buffered saline (PBS), and physiological saline, have significant antibacterial activity against nosocomial/gastrointestinal-causing pathogens, which might be due to ROS-mediated lipid peroxidation. Combining the conventional culture-based method with propidium iodide monoazide quantitative PCR (PMAxx™-qPCR) indicated that PTLs induce a minimal viable but non-culturable (VBNC) state and moderately affect culturable counts. Specifically, the PTL exposure resulted in pathogenicity dysfunction via controlling T3SS-related effector genes of S. enterica. Overall, this study provides insights into the effectiveness of PTLs for inducing ROS-mediated damage, controlling the virulence of diarrheagenic bacteria, and modulating homeostatic genes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Interest in exploring alternative starch sources like finger millet is rising due to wide starch applications. However, native starch often lacks desired qualities, including rheological properties. Modification is thus necessary for specific end uses. Plasma treatment as a greener and sustainable method for starch modification was therefore, studied for its ability to impact rheological properties of finger millet starch (FMS). Considerable changes in the rheological properties on FMS was noted, a significant decrease and increase (p < 0.05) in the peak viscosity (from 3.35 to 0.553 Pa.s) and paste clarity respectively was observed, indicating occurrence of depolymerization. However, intermediate plasma-treated samples (200 V) observed a decrease in paste clarity attributed to aggregate formation and cross-linking. Cross-linking was also confirmed by findings of frequency sweep where a continuous decrease in G' values of plasma treated FMS gel was interrupted by sudden increase. Despite depolymerization causing alteration of rheological behaviour such as decrease in shear thinning properties, gel strength observed a contradictory increase. This was attributed to incorporation of functional group and absence of shear responsible for network formation giving higher gel strength to FMS gels. This is elaborated in detail in the study. The study thus concluded that cold plasma significantly impacted all the rheological properties of the FMS and hence can prove to be beneficial for modification of starch rheological parameters., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This work studied the degradation reaction of sulfonated dyes, indigo carmine, phenol red, and their mixtures by non-thermal plasma (NTP). Interestingly, the degradation rate constant showed a faster process and lower activation energy (E a ) for the dye mixtures than for the degradation reaction of the individual dyes. This unexpected result opened up new opportunities for understanding plasma chemistry and the interaction between reactive species formed by the plasma and the target molecule. As no catalyst or chemical additive was added to the reactor, the decrease in Ea came from a self-synergistic effect (SSE), through the dye molecules fragmentation, which resulted in plasma catalysis. The hypothesis proposed in this work is that oxysulfur (SO x ) species are formed by the desulfonation reaction of dyes. The sulfonic groups (SO 3 ) present in the chemical structures of dyes can function as precursors for forming several SO x •- species. Studies based on oxygenated sulfonated species such as SO 3 •- , SO 4 •- and SO 5 •- have been widely applied in advanced oxidative and reductive processes due to their satisfactory efficiency and low cost. Among them, SO 4 •- is the key reactive species with the best performance in the degradation of pollutants due to its high oxidation potential (E° = 2.60 V). In addition, it is an alternative source of HO • in aqueous media, improving the oxidation reaction. In order to elucidate the SSE, the kinetic process was followed by UV-Vis analysis, and the reactive species, such as alkyl, hydroxyl, and oxy-sulfur radicals were identified by Electron Paramagnetic Resonance. The by-products of the NTP degradation reaction were analyzed by ultrafast liquid chromatography coupled with a mass spectrometer, and a fragmentation route was proposed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

This study investigated the effectiveness of cold-plasma treatment using air and argon as input gas on deactivation of lipolytic enzymes in lightly-milled-rice (LMR). The results showed no significant inactivation in lipase and lipoxygenase using air-plasma. However, using argon as input gas, the residual activities of lipase and lipoxygenase were reduced to 64.51 % and 29.15 % of initial levels, respectively. Argon plasma treatment resulted in more substantial augmentation in peak and breakdown viscosities of LMR starch, suggesting an enhancement in palatability of cooked LMR with increased stickiness and decreased hardness. In contrast to the decrease in volatile compounds in LMR following argon plasma treatment, the concentrations of several prevalent aroma compounds, including 1-hexanol, 1-hexanal, and 2-pentylfuran, exhibited significant increments, reaching 1489.70 ng/g, 3312.10 ng/g, and 58.80 ng/g, respectively. These findings suggest the potential for enhancing various facets of the commercial qualities of LMR by utilizing different input gases during plasma treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Mycotoxins are common in many agricultural products and may harm both animals and humans. Dietary mycotoxins are reduced via physical, chemical, and thermal decontamination methods. Chemical residues are left behind after physical and chemical treatments that decrease food quality. Since mycotoxins are heat-resistant, heat treatments do not completely eradicate them. Cold plasma therapy increases food safety and shelf life. Cold plasma-generated chemical species may kill bacteria quickly at room temperature while leaving no chemical residues. This research explains how cold plasma combats mold and mycotoxins to guarantee food safety and quality. Fungal cells are damaged and killed by cold plasma species. Mycotoxins are also chemically broken down by the species, making the breakdown products safer. According to a preliminary cold plasma study, plasma may enhance food shelf life and quality. The antifungal and antimycotoxin properties of cold plasma benefit fresh produce, agricultural commodities, nuts, peppers, herbs, dried meat, and fish., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Increasing the number of resistant bacteria resistant to treatment is one of the leading causes of death worldwide. These bacteria are created in wounds and injuries and can be transferred through hospital equipment. Various attempts have been made to treat these bacteria in recent years, such as using different drugs and new sterilization methods. However, some bacteria resist drugs, and other traditional methods cannot destroy them. In the meantime, various studies have shown that cold atmospheric plasma can kill these bacteria through different mechanisms, making cold plasma a promising tool to deactivate bacteria. This new technology can be effectively used in the food industry because it has the potential to inactivate microorganisms such as spores and microbial toxins and increase the wettability and printability of polymers to pack fresh and dried food. It can also increase the shelf life of food without leaving any residue or chemical effluent. This paper investigates cold plasma's potential, advantages, and disadvantages in the food industry and sterilization.

To explore the combination effects of plasma-activated water and dielectric barrier discharge (PAW-DBD) cold plasma treatment on the formation of volatile flavor and lipid oxidation in Asian sea bass (ASB), the volatile flavor compounds and lipid profiles were characterized by gas chromatography-ion mobility spectrometry and LC-MS-based lipidomics analyses. In total, 38 volatile flavor compound types were identified, and the PAW-DBD group showed the most kinds of volatile components with a significant (p < 0.05) higher content in aldehydes, ketones, and alcohols. A total of 1500 lipids was detected in lipidomics analysis, phosphatidylcholine was the most followed by triglyceride. The total saturated fatty acids content in PAW-DBD group increased by 105.02 μg/g, while the total content of unsaturated fatty acids decreased by 275.36 μg/g. It can be concluded that the PAW-DBD processing increased both the types and amounts of the volatile flavor in ASB and promoted lipid oxidation by altering lipid profiles., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The disinfection of fabrics is crucial in preventing the spread of infectious diseases caused by pathogenic microorganisms to maintain public health. A previous study proved that plasma-activated nebulized mist (PANM) could effectively inactivate microorganisms both in aerosol and attached to the surface. In this study, the PANM driven by different plasma gases were employed to inactivate microorganisms on diverse fabrics. The PANM could efficiently inactivate a variety of microorganisms, including bacteria, fungi, and viruses, contaminating different fabrics, and even across covering layers of different fabrics. The mites residing on the cotton fabrics both uncovered and covered with various types of fabrics were also effectively inactivated by the PANM. After 30 times repeated treatments of the PANM, notable changes were observed in the color of several fabrics while the structural integrity and mechanical strength of the fabrics were unaffected and maintained similarly to the untreated fabrics with slight changes in elemental composition. Additionally, only trace amounts of nitrate remained in the fabrics after the PANM treatment. Therefore, the PANM treatment supplied an efficient, broad-spectrum, and environmentally friendly strategy for industrial and household disinfection of fabrics., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The impact of dual sequential modifications using radio-frequency (RF) plasma and electron beam irradiation (EBI) on starch properties was investigated and compared with single treatments within an irradiation dose range of 5-20 kGy. Regardless of sequence, dual treatments synergistically affected starch properties, increasing acidity, solubility, and paste clarity, while decreasing rheological features with increasing irradiation dose. The molecular weight distribution was also synergistically influenced. Amylopectin distribution broadened particularly below 10 kGy. Amylose narrowed its distribution across all irradiation doses. This was due to dominating EBI-induced degradation and molecular rearrangements from RF plasma. With the highest average radiation-chemical yield (G) and degradation rate constant (k) of (2.12 ± 0.14) × 10 -6  mol·J -1 and (3.43 ± 0.23) × 10 -4  kGy -1 , respectively, upon RF plasma pre-treatment, amylose underwent random chain scission. In comparison to single treatments, dual modification caused minor alterations in spectral characteristics and crystal short-range order structure, along with increased granule aggregation and surface irregularities. The synergistic effect was dose-dependent, significant up to 10 kGy, irrespective of treatment sequence. The highest synergistic ratio was observed when RF plasma preceded irradiation, demonstrating the superior efficiency of plasma pre-treatment in combination with EBI. This synergy has the potential to lower costs and extend starch's technological uses by enhancing radiation sensitivity and reducing the irradiation dose., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Research to increase biomethane recovery efficiency from thickened sewage sludge (TSWS) using sustainable anaerobic digestion (AD) in municipal wastewater treatment plants is ongoing. Pretreating substrates is known to increase organic biodegradation and biomethane conversion rates in AD. Cold plasma (CP), a recently adopted advanced oxidation processes (AOP) has emerged as an alternative to accelerate pretreatment times under different operation variables. This study assessed raw and CP-pretreated TSWS in an anaerobic sequencing batch reactor (ASBR) and anaerobic membrane bioreactor (AnMBR). The effects of incremental organic loading rates (OLR) and nitrogenous compounds concentration on enhanced CH 4 bioconversion efficiency were evaluated. We found that the AnMBR outperformed the ASBR, with an overall chemical oxygen demand (COD) conversion rate of 67%, lower total nitrogen (T-N) accumulation (594 mg L -1 ), and an overall methane yield of 0.24 L CH 4 g -1 COD. CP pretreatment improved TSWS AD, resulting in more efficient COD removal and methane recovery. This study suggests that CP technology is a promising pretreatment to improve AD when treating TSWS., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

DBD low-temperature plasma (DLTP) is recognized as one of the most efficient technologies for treating cotton stalks. This study investigates the impact of various conditions on the gas production characteristics of cotton stalks (CS) and delves into the DLTP decomposition kinetics of CS and CSC in oxygen-enriched (30 % O 2 /Ar) and CO 2 atmospheres. The decomposition rates of CS followed the order CO 2  > N 2  > Ar. The decomposition behavior of CSC in oxygen-enriched DLTP (30 % O 2 /Ar) aligned well with the chemical reaction model. The activation energies for CSC decomposition at 900 °C and 1000 °C were determined to be 23.8 kJ/mol and 33.8 kJ/mol, respectively. Moreover, the reaction rate decreased at higher carbonization temperatures, which proved to be detrimental to the decomposition of CSC. The DLTP decomposition of CSC in CO 2 exhibited consistency with the fitting results of the unreacted shrinking core model, revealing an observed activation energy of 19.4 kJ/mol., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This paper investigates the effects of argon (Ar) and that of Ar mixed with ambient air (Ar-Air) cold plasma jets (CPJs) on 4-nitrophenol (4-NP) degradation using low input power. The introduction of ambient air into the Ar-Air plasma jet enhances ionization-driven processes during high-voltage discharge by utilizing nitrogen and oxygen molecules from ambient air, resulting in increased reactive oxygen and nitrogen species (RONS) production, which synergistically interacts with argon. This substantial generation of RONS establishes Ar-Air plasma jet as an effective method for treating 4-NP contamination in deionized water (DW). Notably, the Ar-Air plasma jet treatment outperforms that of the Ar jet. It achieves a higher degradation rate of 97.2% and a maximum energy efficiency of 57.3 gkW -1 h -1 , following a 6-min (min) treatment with 100 mgL -1 4-NP in DW. In contrast, Ar jet treatment yielded a lower degradation rate and an energy efficiency of 75.6% and 47.8 gkW -1 h -1 , respectively, under identical conditions. Furthermore, the first-order rate coefficient for 4-NP degradation was measured at 0.23 min -1 for the Ar plasma jet and significantly higher at 0.56 min -1 for the Ar-Air plasma jet. Reactive oxygen species, such as hydroxyl radical and ozone, along with energy from excited species and plasma-generated electron transfers, are responsible for CPJ-assisted 4-NP breakdown. In summary, this study examines RONS production from Ar and Ar-Air plasma jets, evaluates their 4-NP removal efficacy, and investigates the biocompatibility of 4-NP that has been degraded after plasma treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Melanoma is a prevalent malignant skin tumor known for its high invasive ability and a high rate of metastasis, making clinical treatment exceptionally challenging. Tumor-associated macrophages (TAMs) are the most abundant immune cells in the tumor microenvironment and play a crucial role in tumor survival and development. Cold atmospheric plasma (CAP) is an emerging tool for tumor treatment that has garnered attention from scholars due to its interaction with non-tumor cells in the tumor microenvironment. Here, we used the macrophage lines THP-1 and RAW264.7, as well as the melanoma cell lines A375 and MV3, as research subjects to investigate the effect of plasma-activated liquid (PAL) on macrophage differentiation and its inhibitory effect on melanoma cell proliferation. We confirmed that the killing effect of PAL on melanoma cells was selective. Using flow cytometry and PCR, we discovered that PAL can influence macrophage differentiation. Through in vitro cell coculture, we demonstrated that PAL-treated macrophages can significantly impede tumor cell development and progression, and the effect is more potent than that of PAL directly targeting tumor cells. Furthermore, we have proposed the hypothesis that PAL promotes the differentiation of macrophages into the M1 type through the ROS/JAK2/STAT1 pathway. To test the hypothesis, we employed catalase and fludarabine to block different sites of the pathway. The results were then validated through Western Blot, qPCR and ELISA. This study illustrates that PAL therapy is an effective tumor immunotherapy and expands the scope of tumor immunotherapy. Furthermore, these findings establish a theoretical foundation for potential clinical applications of PAL., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Masson SAS.. All rights reserved.)

Background: High methylation of the DFNA5 gene results in the absence of GSDME, a key protein that mediates pyroptosis, while decitabine demethylates the DFNA5 gene, resulting in high expression of the GSDME protein. Cold atmospheric plasma (CAP) is a novel anti-cancer method that induces tumor cell death., Methods: The pyroptosis induced by decitabine in combination with CAP in Ovcar5 cells was evaluated. In particular, mitochondrial membrane potential was estimated by JC-1 staining, dehydrogenase (LDH) release was assessed by ELISA, Annexin V/PI staining was detected by flow cytometry, the cell cycle changes were evaluated using PI staining followed by detection by flow cytometry, and Caspase-9 cleavage, Caspase-3 cleavage and GSDME expression were evaluated by western blot., Results: Decitabine resulted in high expression of the GSDME in Ovcar5 in a concentration-dependent manner and increased tumor cell sensitivity to CAP. CAP induced mitochondrial damage and activated the Caspase-9/Caspase-3 pathway. Therefore, decitabine combined with CAP induced Ovcar5 cell pyroptosis through Caspase-3 mediated GSDME cleavage. Reactive oxygen species (ROS) generated by CAP treatment played an important role in the CAP/decitabine combination-induced production of ROS, activation of Caspase-9/Caspase-3, GSDME cleavage and pyroptosis that ROS scavenger NAC inhibited all these processes., Conclusions: CAP combined with decitabine induced Caspase-3 activation, which cleaved decitabine-upregulated GSDME and ediated pyroptosis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Ara h 1 is the major allergen in peanuts. To enhance the unique flavor, peanuts are usually roasted at high temperatures. However, roasting can increase the allergenic potential, owing to glycation of allergens. Atmospheric cold plasma (ACP) is a non-thermal processing technology that generates reactive species, enabling protein structural changes. Herein, glucose was also added to the ACP-treated peanut protein before roasting. The content and antigenicity of the advanced glycation end products were measured. The antigenicity was evaluated by ELISA and in vitro digestion assays. The amino acid profile and secondary and tertiary protein structures were also assessed. The antigenicity of Ara h 1 decreased by 91 % and 76 % after 30 min of air and nitrogen plasma treatment, respectively. The glycation degree and thermal and digestive stabilities were also reduced. These results correlated with the structural changes, denaturation, and aggregation. Therefore, cold plasma may reduce the allergic effects of peanuts., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

This study represents the inaugural investigation into the effect of cold plasma (CP) pretreatment combined with sodium periodate on the preparation of dialdehyde starch (DAS) from native maize starch and its consequent effects on the properties of DAS. The findings indicate that the maize starch underwent etching by the plasma, leading to an increase in the particle size of the starch, which in turn weakened the rigid structure of the starch and reduced its crystallinity. Concurrently, the plasma treatment induced cleavage of the starch molecular chain, resulting in a decrease in the viscosity of the starch and an enhancement of its fluidity. These alterations facilitated an increased contact area between the starch and the oxidising agent sodium periodate, thereby augmenting the efficiency of the DAS preparation reaction. Consequently, the aldehyde group content was elevated by 9.98 % compared to the conventional DAS preparation methodology. Therefore, CP could be an efficient and environmentally friendly non-thermal processing method to assist starch oxidation for DAS preparation and property enhancement., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Excessive proliferation of algae in water depletes dissolved oxygen, resulting in the demise of aquatic life and environmental damage. This study delves into the effectiveness of the dielectric barrier discharge (DBD) plasma activated peracetic acid (PAA) system in deactivating Chlorella. Within 15 min, the algae removal effectiveness reached 89 % under ideal trial conditions. DBD plasma activation of PAA augmented the concentration of reactive species such as ·OH, 1 O 2 , and organic radicals (RO·) in the solution, which are involved in the process of cell inactivation. Reactive oxygen species (ROS) within Chlorella cells continued to rise as a result of treatment-induced damage to the morphological structure and cell membrane of the organism. DNA and chlorophyll-a (Chl-a), were oxidized and destroyed by these invasive active compounds. This study presents an efficient advanced oxidation method to destroy algal cells and adds an alternative strategy for algal control in areas where eutrophication occurs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Dielectric barrier discharge (DBD) was a commonly used non-thermal plasma (CP) technology. This paper aimed to enhance the biological activity of apricot polysaccharides (AP) by using dielectric barrier discharge (DBD-CP) assisted H 2 O 2 -VC Fenton reaction for degradation. The degradation conditions were optimized through response surface methodology. The molecular weight (Mw) of degraded apricot polysaccharides (DAP) was 19.71 kDa, which was 7.25 % of AP. The inhibition rate of DAP (2 mg/mL) was 82.8 ± 3.27 %, which was 106.87 % higher than that of AP. DBD-CP/H 2 O 2 -VC degradation changed the monosaccharide composition of AP and improved the linearity of polysaccharide chains. In addition, a novel apricot polysaccharide DAP-2 with a Mw of only 6.60 kDa was isolated from DAP. The repeating units of the main chain of DAP-2 were →4)-α-D-GalpA-(1 →, the branch chain was mainly composed of α-D-GalpA-(1 → 2)-α-L-Rhap-(1→ connected to O-3 position →3,4)-α-D-GalpA-(1→. The complex structure formed by the combination of DAP-2 and α-glucosidase was stable. DAP-2 had a higher α-glucosidase binding ability than the acarbose. These results suggested that DAP-2 had the potential to be developed as a potential hypoglycemic functional food and drug., Competing Interests: Declaration of competing interest The content of this article has been reviewed by all authors. The authors have declared no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Viruses can spread through contaminated aerosols and contaminated surface materials, and effective disinfection techniques are essential for virus inactivation. Nonthermal plasma-generated reactive oxygen and nitrogen species can effectively inactivate the coronavirus. We aim to interpret the coronavirus inactivation level and mechanism of surface interaction with materials with and without dielectric barrier discharge (DBD) plasma treatment. Nonthermal plasma, particularly surface-type DBD plasma, can inactivate human coronavirus 229E (HCoV-229E) on porous (paper, wood, mask) and nonporous (plastic, stainless steel, glass, Cu) materials. Virus inactivation was analyzed using a 50% tissue culture infectivity dose (TCID 50 ) using cell line, flow cytometry, and immunofluorescence. Surfaces contaminated with HCoV-229E were treated at different time intervals (0-5 h) with and without plasma exposure (natural decay in ambient air conditions). HCoV-229E persistence conformed to the following order: plastic > cover glass > stainless steel > mask > wood > paper > Cu with and without plasma exposure. HCoV-229E was more stable in plastic, cover glass, and stainless steel in 5 h, and the viable virus titer gradually decreased from its initial log 10 order of 6.892 to 1.72, 1.53, and 1.32 TCID 50 /mL, respectively, under plasma exposure. No virus was observed in Cu after treatment for 5 h. The use of airflow, ambient nitrogen, and argon did not promote virus inactivation. Flow cytometry and immunofluorescence analysis demonstrated a low expression level of spike protein (fluorescence intensity) during plasma treatment and in E and M genes expression compared with the virus control., (© 2024 Wiley Periodicals LLC.)

The impact of Dielectric-Barrier Discharge (DBD) plasma treatment on the prevention of heat-induced aggregation of Ovalbumin (OVA) and improvement in emulsification properties was investigated. Results highlighted the effective inhibition of thermal aggregation of OVA following exposure to plasma. Structural analysis revealed that the plasma-induced oxidation of sulfhydryl and intermolecular disulfide bonds played a pivotal role in inhibiting the thermal aggregation, considered by Sodium Dodecyl Sulfate Polyacrylamide Gel Electrophoresis (SDS-PAGE), multiplies spectroscopy, and analysis of dynamic exchange of sulfhydryl-disulfide bonds. Meanwhile, the oxidation of exposed hydrophobic sites due to plasma treatment resulted in the transformation of the OVA molecule's surface from hydrophobic to hydrophilic, contributing significantly to the aggregation inhibition. Additionally, compared to an untreated sample of OVA, almost one-fold increase in emulsifying ability (EAI) and 1.5-fold in emulsifying stability (ESI) was observed after 4 min of plasma treatment. These findings demonstrated that plasma treatment not only enhanced the thermal stability of OVA, but also improved its emulsification properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Rapid degradation of carbofuran (CBF) pesticide is effectively achieved by submerged thermal plasma (STP) without and with the addition of persulfate (PS) at two different concentrations (10 and 20 ppm). Degradation efficiency was examined using high-performance liquid chromatography (HPLC), and mineralization percentage was determined by total organic carbon (TOC) analysis. Adding 10 ppm PS showed higher degradation and mineralization percentages of 99.5% and 65.2%, respectively, than mere plasma treatment and 20 ppm PS addition to CBF solution. A relatively higher energy yield of 40 mg/kWh and a first order kinetic reaction rate of 0.262 min -1 were obtained in the 10 PS added STP treatment. Liquid chromatography mass spectrometry (LCMS) analysis illustrated reaction intermediates formed during plasma treatment. Scavenger investigation implied that • OH radical is the prime cause of CBF degradation, as degradation percentage declined to 50% in all conditions. Toxicity assessment of CBF and its degradation products was predicted using Toxicity estimation software tool (TEST), and plasma treated solutions (PTS) were experimentally investigated on Eudrilus eugeniae earthworms by monitoring its mortality rate, self-assemblage, and histopathological analysis. A lower mortality rate (46%) and self-assemblage (167 s) of earthworms were detected for plasma treated CBF than for the other conditions. The results reveal that PTS is less toxic for earthworms than untreated CBF solution. These findings imply that STP is an effective technique for bio-recalcitrant pollutants degradation in agrochemical industries., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Banana starch has attracted significant attention due to its abundant content of resistant starch. This study aims to compare the multiscale structure and functional properties of banana starch obtained from five cultivated varieties and investigate the impact of dielectric barrier discharge cold plasma (DBD) treatment on these starch characteristics. All five types of natural banana starch exhibited an elliptical and irregular shape, conforming to the CB crystal structure, with a bimodal distribution of branch chain lengths. The resistant starch content ranged from 88.9 % to 94.1 %. Variations in the amylose content, amylopectin branch chain length distribution, and structural characteristics resulted in differences in properties such as gelatinization behavior and sensitivity to DBD treatment. The DBD treatment inflicted surface damage on starch granules, reduced the amylose content, shortened the amylopectin branch chain length, and changed the relative crystallinity to varying degrees. The DBD treatment significantly increased starch solubility and light transmittance. Simultaneously, it resulted in a noteworthy decrease in peak viscosity and gelatinization enthalpy of starch paste. The in vitro digestibility test showed that 76.2 %-86.5 % of resistant starch was retained after DBD treatment. The DBD treatment renders banana starch with reduced viscosity, increased paste transparency, enhanced solubility, and broadens its potential application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The excessive and uncontrollable discharge of diverse organic pollutants into the environment has emerged as a significant concern, presenting a substantial risk to human health. Among the advanced oxidation processes used for the purification of wastewater, cold plasma technology is superior in fast and effective decontamination but often fails facing mixed pollutants. To address these issues, here we develop the new conceptual approach, plasma process, and proprietary reactor that ensure, for the first time, that the efficiency of treatment (114.7%) of two mixed organic dyes, methylene blue (MB) and methyl orange (MO), is higher than when the two dyes are treated separately. We further reveal the underlying mechanisms for the energy-efficient complete degradation of the mixed dyes. The contribution of plasma-induced ROS and the distinct degradation characteristics and mechanism of pollutants in mixed treatment are discussed. The electron transfer pathway revealed for the first time suggest that the mixed pollutants reduce the overall redox potentials and facilitate electron transfer during the plasma treatment, promoting synergistic degradation effects. The integrated frameworks including both direct and indirect mechanisms provide new insights into the high-efficiency mixed-contaminant treatment. The degradation products for mixed degradation are revealed based on the identification of intermediate species. The plasma-treated water is proven safe for living creatures in waterways and sustainable fishery applications, using in vivo zebrafish model bio-toxicity assay. Overall, these findings offer a feasible approach and new insights into the mechanisms for the development of highly-effective, energy-efficient technologies for wastewater treatment and reuse in agriculture, industry, and potentially in urban water networks., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Cold atmospheric plasma (CAP) treatment is used in this study to inactivate Penicillium digitatum in lime fruit at post-harvest. Limes were inoculated manually withP. digitatum spore (10 6 CFU/fruit) and then were treated with CAP at 30, 60, 90, and 120 s and compared with untreated samples. The results showed that increasing the exposure time of CAP reduced spores to less than 7 CFU/fruit in 120 s on the lime peel. In the treated samples, antioxidant activity had an upward trend. In addition, phenolic compounds, vitamin C, density, soluble solid content (SSC), color, and pH of the lime juice were increased (P < 0.05). Compared to the control sample, no significant changes were observed in the juice yield percentage, texture, acidity, chlorophyll, and carotenoid (P > 0.05). The best exposure for CAP treatment was 60 s since it increased phenolic compounds, antioxidant activity, and vitamin C content in the lime juice., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a highly transmissible virus that has precipitated a worldwide pandemic of coronavirus disease since 2019. Developing an effective disinfection strategy is crucial to prevent the risk of surface cross-contamination by SARS-CoV-2. This study employed pseudovirus and the receptor-binding domain (RBD) protein of SARS-CoV-2 as models to investigate the spike protein inactivation process and its underlying mechanisms using a novel nonthermal technology. Cold plasma combined with 222 nm ultraviolet (CP+UV) treatment was applied to accelerate the generation of reactive species and enhance sterilization efficiency. The results indicated that the binding activity of RBD protein was completely inhibited at specific concentrations (0.01-0.05 mg/cm 2 ) with corresponding treatment times of 15-30 s. The mechanism potentially involves the reactive species generated by CP+UV, which react with the spike protein RBD of SARS-CoV-2, leading to the loss of SARS-CoV-2 infectivity by causing damage to the β-sheet structure and chemical bonds in the RBD protein. Validated by a biosafety level 3 (BSL3) laboratory, the CP+UV treatment for 30 s could completely inactivate SARS-CoV-2 with a concentration of 19054 ± 1112 TCID 50 /cm 2 . Therefore, this study potentially provides a novel disinfection strategy for the inactivation of SARS-CoV-2 on surface cross-contamination., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Incorrect use of neonicotinoid pesticides poses a serious threat to human and pollinator health, as these substances are commonly present in bee products and even drinking water. To combat this threat, the study developed a new method of degrading the pesticide imidacloprid using surface discharge cold plasma oxidation technology. The study showed that this method achieved a very high efficiency of imidacloprid degradation of 91.4%. The main reactive oxygen species (H 2 O 2 , O 3 , ·OH, O 2 - , 1 O 2 ) effectively participated in the decomposition reaction of imidacloprid. Reactive oxygen species were more sensitive to the structure of the nitroimine group. Density functional theory (DFT) further explored the sites of reactive oxygen species attack on imidacloprid and revealed the process of energy change of attacking imidacloprid. In addition, a degradation pathway for imidacloprid was proposed, mainly involving reactive oxygen species chemisorption, a ring-opening intermediate, and complete cleavage of the nitroimine group structure. Model predictions indicated that acute oral and developmental toxicity were significantly reduced after cold plasma treatment, as confirmed by insect experiments. Animal experiments have shown that plasma treatment reduces imidacloprid damage to mice hippocampal tissue structure and inhibits the reduction of brain-derived neurotrophic factor content, thus revealing the detoxification mechanism of the body., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This study investigated the effects of radio frequency air cold plasma (RFACP) pretreatment on the multi-scale structures, physicochemical properties, enzymatic hydrolysis, and hydroxypropylation of tapioca starch. The results showed that cold plasma (CP) made starch granules rough on the surface and disrupted long- and short-range ordered structures, reducing relative crystallinity from 43.8 % to 37.4 % and R 1047/1022 value from 0.992 to 0.934. Meanwhile, the starch molecules were depolymerized and oxidized by CP, reducing weight-average molecular weight from 9.64 × 10 7 to 2.17 × 10 7  g/mol, while increasing carbonyl and carboxyl groups by up to 118 % and 53 %. Additionally, CP-treated starches exhibited higher solubility and swelling power, along with lower gelatinization enthalpy. Short-time CP pretreatment (10 min) promoted the hydroxypropylation of starch and increased the molar substitution (0.081-0.112). Also, CP pretreatment accelerated enzymatic hydrolysis of starch, as indicated by the increase in hydrolysis rate (1.846 × 10 -3 -2.033 × 10 -3  min -1 ) and degree of hydrolysis (51.45 % - 59.92 %). Overall, the multi-scale structural disruption induced by CP treatment facilitated the accessibility of enzymes/chemical reagents into starch granules and glucan chains. This study suggested that RFACP could be used for starch pretreatment to increase production efficiency in modified starch production, as well as in brewing and fermentation industries., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, we present a novel approach for enhancing the performance of Quercetin-loaded nanofiber drug delivery systems through the modification of Polycaprolactone (PCL) solution using Cold Atmospheric Plasma (CAP) prior to electrospinning. CAP treatment was applied to PCL solutions for varying durations, namely, 0.5, 1, and 3 min. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) collectively demonstrate that CAP application and QU loading induce morphological changes in nanofibers, facilitating the creation of drug delivery systems with modified fiber diameters, devoid of bead formation. CAP treatment duration correlates with varying fiber diameters, with the longest treatment (3 min) producing the largest fibers (1324 ± 387 nm). Concurrently, the incorporation of quercetin (QU) into the PCL nanofibers resulted in reduced fiber diameter. These observations emphasize the pivotal role of CAP modification in tailoring nanofiber size and morphology. Notably, minimal peak shifts indicate no significant molecular structure changes in PCL nanofibers compared to PCL solutions, assuring the absence of unwanted chemical modifications or degradation during electrospinning. Furthermore, specific QU peaks are undetectable in Fourier-transform infrared (FTIR) spectra, suggesting dispersed or amorphous QU molecules within the nanofibers. Additionally, X-ray diffraction (XRD) results demonstrate that CAP treatment does not alter the crystalline structure of the PCL nanofiber drug delivery system. Crystalline planes of PCL remain unchanged, affirming stability under CAP treatment conditions. Water contact angles indicate that CAP treatment affects nanofiber hydrophobicity, with shorter CAP treatment times rendering more hydrophilic surfaces. Cumulative QU release percentages vary, with PCL/CAP-0.5-QU exhibiting the highest release at 56 ± 2.2 %, surpassing unmodified PCL/QU. Moreover, cell viability remains comparable or slightly increased when QU is incorporated into CAP-treated PCL nanofibers, suggesting potential mitigation of cytotoxic effects induced by CAP treatment. The combination of QU and CAP treatment enhances cancer cell viability reduction, QU release from nanofibers, and drug loading efficiency in a synergistic manner., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Advanced oxidation processes such as thermal plasma activation and UV-C/H 2 O 2 treatment are considered as applications for the degradation of pharmaceutical residues in wastewater complementary to conventional wastewater treatment. It is supposed that direct oxidative treatment can lower the toxicity of hospital sewage water (HSW). The aim of this study was to predict the ecotoxicity for three aquatic species before and after oxidative treatment of 10 quantified pharmaceuticals in hospital sewage water. With the application of oxidative chemistry, pharmaceuticals are degraded into transformation products before reaching complete mineralization. To estimate the potential ecotoxicity for fish, Daphnia and green algae ECOSAR quantitative structure-activity relationship software was used. Structure information from pristine pharmaceuticals and their oxidative transformation products were calculated separately and in a mixture computed to determine the risk quotient (RQ). Calculated mixture toxicities for 10 compounds found in untreated HSW resulted in moderate-high RQ predictions for all three aquatic species. Compared to untreated HSW, 30-min treatment with thermal plasma activation or UV-C/H 2 O 2 resulted in lowered RQs. For the expected transformation products originating from fluoxetine, cyclophosphamide and acetaminophen increased RQs were predicted. Prolongation of thermal plasma oxidation up to 120 min predicted low-moderate toxicity in all target species. It is anticipated that further degradation of oxidative transformation products will end in less toxic aliphatic and carboxylic acid products. Predicted RQs after UV-C/H 2 O 2 treatment turned out to be still moderate-high. In conclusion, in silico extrapolation of experimental findings can provide useful predicted estimates of mixture toxicity. However due to the complex composition of wastewater this in silico approach is a first step to screen for ecotoxicity. It is recommendable to confirm these predictions with ecotoxic bioassays., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

The tailing phenomenon, where the survival curve of bacteria shows a slow tailing period after a rapid decline, is a ubiquitous inactivation kinetics process in the advanced plasma sterilization field. While classical models suggest that bacterial resistance dispersion causes the tailing phenomenon, experiments suggest that the non-uniform spatial distribution of spores (clustered structure) is the cause. However, no existing inactivation kinetics model can accurately describe spatial heterogeneity. In this paper, we propose a lattice model based on percolation theory to explain the inactivation kinetics by considering the non-uniform spatial distribution of spores and plasma. Our model divides spores into non-clustered and clustered types and distinguishes between short-tailing and long-tailing compositions and their formation mechanisms. By systematically studying the effects of different spore and plasma parameters on the tailing phenomenon, we provide a reasonable explanation for the kinetic law of the plasma sterilization survival curve and the mechanism of the tailing phenomenon in various cases. As an example, our model accurately explains the 80-second kinetics of atmospheric pressure plasma inactivation of spores, a process that previous models struggled to understand due to its multi-stage and long-tail phenomena. Our model predicts that increasing the spatial distribution probability of plasma can shorten the complete killing time under the same total energy, and we validate this prediction through experiments. Our model successfully explains the seemingly irregular plasma sterilization survival curve and deepens our understanding of the tailing phenomenon in plasma sterilization. This study offers valuable insights for the sterilization of food surfaces using plasma technology, and could serve as a guide for practical applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Nowadays, it is increasingly crucial to combine innovative approaches with established methods to enhance plant tolerance and maximize the production of beneficial compounds. With this aim in view, a study was carried out to investigate how different melatonin concentrations (0, 30, and 60 ppm), cold plasma treatment (at 3000 and 4000 V), and varying exposure durations (0, 1, 2, and 4 min) affect the physiological and biochemical attributes of fenugreek plants, as well as the levels of diosgenin under salinity stress. This study revealed that the application of 3000 V cold plasma for 2 min with 60 ppm melatonin by establishing cellular redox homeostasis in salinity-treated fenugreek plants, effectively prevented the destruction of pigments and reduced the electrolyte leakage index of malondialdehyde content. The utilization of these two elicitors has the potential to trigger multiple pathways, including the enzymatic and non-enzymatic antioxidants biosynthesis, and abscisic acid-dependent pathways. This activation results in an enhanced production of abscisic acid, auxin, and endogenous melatonin, along with the regulation of signal transduction pathways. Surprisingly, applying these two treatments increased the expression of SQS, CAS, SSR, BGL, SEP, SMT, and diosgenin content by 13, 22.5, 21.6, 19, 15.4, 12, and 6 times respectively. The findings highlight the intricate interplay between these treatments and the positive impact of their combined application, opening up avenues for further research and practical applications in improving plant tolerance to environmental stresses., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

Wastewater decontamination in pharmaceuticals is crucial to prevent environmental and health risks from API residues and other contaminants. Advanced oxidation processes (AOPs) combined with cavitational treatments offer effective solutions. Challenges include designing reactors on a large scale and monitoring the effectiveness and synergies of the hybrid technology. In the present work, pilot-scale treatment of a real high COD (485 g/L) pharmaceutical wastewater (PW) was investigated using hydrodynamic cavitation (HC) operated individually at 330 L/h or in combination with oxidants and electrical discharge (ED) with cold plasma (15 kV and 48 kHz). The first approach consisted of PW cavitational treatment alone of 7 L of 1:100 diluted PW at a HC-induced pressure of 60 bar and a flow rate of 330 L/h. However, this strategy did not provide satisfactory results for COD (∼15% less), and only when HC treatment was extended to more than 30 min in a recirculation mode, encouraging results were obtained (∼45% COD reduction). Consequently, a hybrid approach combining HC with ED-cold plasma was chosen to treat this high-COD PW. Aiming to establish an efficient flow-through hybrid process, after optimising all cavitation and electrical discharge parameters (45 bar HC pressure and 10 kHz ED frequency), the best COD abatement of ∼50 % was recorded with a 1:50 diluted PW. However, a subsequent adsorption step over activated carbon was required to achieve an almost quantitative COD reduction (95%+). Our integrated physicochemical process proved to be extremely efficient in treating high-COD industrial wastewater and resulted in a remarkable reduction of the COD value. In addition, the residual surfactants content in the PW were also drastically reduced (98%+) when a small amount of oxidants was added in the hybrid HC/ED treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The current study aimed to investigate the influence of pin-to-plate atmospheric cold plasma treatment (ACP) on the microbial decontamination efficacy, physical (water activity, color, texture), and bioactive (total phenolic and anti-oxidant capacity, volatile oil profile) of three major spices cinnamon, black pepper, and fennel at three different voltages (170, 200, 230 V) and exposure time (5, 10, 15 min). The surface etching and oxidative reactions of cold plasma is anticipated to cause microbial decontamination of the spices. In accordance with this, the ACP treatment significantly reduced the yeast and mold count of cinnamon, black pepper, and fennel, resulting in 1.3 Log CFU/g, 1.1 Log CFU/g, and 1.0 Log CFU/g, respectively even at the lowest treatment at 170 V-5 min. While at the highest treatment of 230 V-15 min, complete decontamination in all the samples was observed due to the plasma-induced microbial cell disruption. The water activity of samples reduced post-treatment 0.69 ± 0.02 to 0.51 ± 0.03 for cinnamon, 0.61 ± 0.03 to 0.49 ± 0.01 for pepper, and 0.60 ± 0.02 to 0.43 ± 0.02 for fennel which further reassures better microbial stability. The color and textural properties were significantly unaffected (p > 0.05) preserving the fresh-like attributes. The total phenolic content was increased for cinnamon (2.26 %), black pepper (0.11 %), and fennel (0.33 %) after plasma treatment at 230 V-15 min due to the cold plasma surface etching phenomenon. However, the essential oil composition revealed no significant variation in all three spices' control and treated samples. Thus, the study proves the potential of the atmospheric pressure cold plasma for the complete decontamination of the investigated spices (cinnamon, pepper, fennel) without remarkable changes in the volatile oil profile., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

In vivo biological regulations of the allergenicity of tropomyosin (TM) treated by cold plasma (CP) were investigated by in vivo mouse model. The sensitization models of Balb/c mice were successfully established. CP treatment reduced the allergic symptoms of mice and regulated the Th1/Th2 balance to prevent allergy by activating Treg cells, which was deduced by serum and cytokines analysis. For intestinal flora analysis, allergy occurrence was accompanied by the decreased species abundance and the increased species diversity of intestinal flora. The significant species composition difference between the TM group and the PBS group showed a possible connection between bacterial diversity and allergy. Furthermore, Firmicutes, Bacteroidetes, Parabacteroides, Alloprevotella, Bacteroides, and Lachnospiraceae could relate to allergy occurrence. Intestinal section analysis suggested that allergy occurrence was accompanied by the damaged intestinal structure, and CP treatment could relieve the damage caused by an allergy., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Eggshell cuticles are first lines of defense against egg-associated pathogens, such as Salmonella enterica serovar Enteritidis (SE). Infections from eggs contaminated with this strain remain a significant risk. In addition, changes in the cuticle are closely related to changes in egg safety. The emerging non-thermal atmospheric pressure plasma technology enables a high rate of microbial inactivation at near-ambient temperatures, making it ideal for food safety applications. This study examines the effects of a cold atmospheric pressure air plasma jet (CAAP-J) on eggshell cuticle and egg quality whilst inactivating SE. Shell eggs inoculated with SE (7 log 10 cfu/egg) were used as the samples to test the decontamination performance of the device. The tests were conducted using an industrial CAAP-J with different power levels (600-800 W), exposure times (60-120 s), at a fixeddistance of 20 mm from the plasma jet and an air flow rate of 3600 L/h. It was found that the best results were obtained after 120 s at maximum plasma power (800 W). Subsequent to the implementation of this plasma procedure, it was determined that no viable cells could be detected. After CAAP-J treatment, the temperature remains below 50.5 °C, thereby minimizing the risk of altering egg quality. All specific measurements (egg white pH, yolk pH, yolk color, HU, and eggshell breaking strength) have shown that CAAP-J treatment has no negative effect on egg quality. No changes in eggshell cuticle quality after CAAP-J treatment was confirmed through scanning electron microscope (SEM)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Food contaminated by mycotoxins has become a worldwide public problem with political and economic implications. Although a variety of traditional methods have been used to eliminate mycotoxins from agri-foods, the results have been somewhat less than satisfactory. As an emerging non-thermal processing technology, atmospheric cold plasma (ACP) has great potential for food decontamination. Herein, this review mainly presents the degradation efficiency of ACP on mycotoxins in vitro and agri-foods as well as its possible degradation mechanisms. Meanwhile, ACP effects on food quality, factors affecting the degradation efficiency and the toxicity of degradation products are also discussed. According to the literatures, ACP could efficiently degrade many mycotoxins (e.g., aflatoxin, deoxynivalenol, zearalenone, ochratoxin A, fumonisin, and T-2 toxin) both in vitro and various foods (e.g., hazelnut, peanut, maize, rice, wheat, barley, oat flour, and date palm fruit) with little effects on the nutritional and sensory properties of food. The degradation efficacy was dependent on many factors including ACP treatment parameter, working gas, mycotoxin property, and food substrate. The mycotoxin degradation by ACP was mainly attributed to the reactive oxygen and nitrogen species in ACP, which can damage the chemical bonds of mycotoxins, consequently reducing the toxicity of mycotoxins., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Fresh wolfberries, a nutritious "super fruit", face limited marketing potential due to storage difficulties. This study aimed to enhance their storage stability using dielectric barrier discharge plasma (DBD) pretreatment and investigate the intervention mechanism. The results indicated that the optimal condition of DBD pretreatment for fresh wolfberries was 13.64 kV, 70 s and 2.7 kHz, which extended their shelf from 2 to 5 d at room temperature. This pretreatment reduced decay, weight loss, and firmness reduction by inactivating microorganisms and inhibiting respiration. Additionally, the decline of phenols, flavonoids, ascorbic acid, and antioxidant activity was inhibited, while maintaining high content of polysaccharides, titratable acid, and carotenoids. Interestingly, moderate DBD treatment produced reactive oxygen species (ROS) that triggered the defense response of wolfberries' ROS metabolism system and promoted the biosynthesis of flavonoids, thereby enhancing resistance to decay. The findings offer new insight into plasma effects on fruits and vegetables., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Three physical treatments, including ball-milling (BM), high pressure homogenization (HPH) and cold plasma (CP) were applied to modify structural and functional properties of Cyperus esculentus protein (CEP). The results showed that three treatments significantly altered morphology and reduced particle size of CEP. Both primary and secondary structures of CEP were hardly changed, while disulfide bonds and hydrophobic forces between amino acid residues of CEP were interrupted by three treatments, releasing free sulfhydryls and hydrophobic groups. With the free moiety accumulation, the reformed interactions between them enhanced the crystallinity and thermostability of CEP. Besides, solubility and emulsifying properties of CEP were significantly improved within a certain range of treatment duration and intensity, and three treatments decreased water but increased oil holding capacity of CEP. Conclusively, the modified physicochemical properties of CEP were decided by the changed molecular structures of CEP, and different treatments may satisfy different processing requirements for the protein., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Commercial sterilization plays an important role in extending the shelf-life of coconut milk. However, thermal sterilization affects the quality of coconut milk. This study was initiated to evaluate the effects of atmospheric cold plasma (ACP) treatment on some important quality parameters of coconut milk. ACP treatment had a slight effect on physicochemical characteristics and nutritional ingredients while it obviously reduced the colony count. Furthermore, ACP treatment obviously promoted the formation of lactone, an indispensable volatile substance in coconut milk. Insufficient or moderate ACP treatment had subtle effect on the sensory quality. Notably, moderate ACP treatment reduced the droplet size from 28.0 μm to 18.6 μm, and improved the stability during storage and centrifugation, especially at 60 kV 60 s. Overall, sterilization of coconut milk by ACP at 60 kV 60 s was the most ideal. This study can provide theoretical guidance for the application of ACP in liquid food., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The ease of processing and biocompatibility of polylactic acid (PLA) have made it a widely used material for fused deposition modeling (FDM)-based 3D printing. In spite of this, PLA suffers from some limitations for its extensive use in tissue engineering applications, including poor wettability, low degradation rate, and insufficient mechanical properties. To address the previously mentioned limitations, this study examined how combining in-process cold atmospheric plasma treatment with the inclusion of CaCO 3 influences the properties of FDM-printed PLA scaffolds. Differential scanning calorimetry results showed that by incorporating CaCO 3 micro-particles into the PLA matrix, heterogeneous nucleation promoted the matrix's crystalline content. Scanning electron microscopy analysis revealed that the surface of the PLA-CaCO 3 scaffold exhibited increased roughness and improved interlayer bonding after undergoing plasma treatment. Atomic force microscopy revealed a significant (up to 80-fold) increase in the roughness value of PLA scaffolds after the incorporation of CaCO 3 and subsequent cold plasma treatment. Furthermore, X-ray photoelectron spectroscopy analysis indicated that atmospheric plasma treatment substantially increased the presence of oxygen-containing bonds, leading to a significant reduction in the water contact angle, which decreased from 89° to 37°. According to the tensile test, the tensile modulus (634.1 MPa) and ultimate tensile strength (25.4 MPa) of PLA were markedly increased and reached 914.3 and 37.2 MPa, respectively, for the plasma-treated PLA-CaCO 3 (PT-PLA-CaCO 3 ). Additionally, the in-vitro degradation test showed that PT-PLA-CaCO 3 scaffold exhibited higher degradation rate compared to the PLA-CaCO 3 sample. Based on the obtained results, it appears that in-process cold atmospheric plasma treatment could serve as an efficient and straightforward method to enhance the properties of 3D-printed composite parts, particularly for tissue engineering applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Plasma gas phase synthesis of graphene method is one-step synthesis, without catalyst, acid, solvent and substrate materials. In this paper, plasma pyrolysis of C2H4 for the preparation of graphene was carried out to investigate the effect of doping H2, CO2, and N2 on the morphology characteristics and chemical reaction properties of the synthesized products at different reaction temperatures ranging from 1500 to 4500 K. It was found that an increase in temperature leads to flatter morphology, less agglomeration, and a decrease in defect density and oxygen content in graphene. The addition of H2, CO2, and N2 gases affected the morphology and defect density of the products. In addition, the high temperature conditions increase the hydrogen atom concentration and etch the edges of graphene, while CO2 slows down the etching process and decreases the defect density. Doping with high enthalpy N2 favors the improvement of crystallinity and defect density at low temperatures, but increases the defect density at high temperatures. These findings contribute to further understanding of the application and optimization of the method of plasma gas phase synthesis of graphene. [ABSTRACT FROM AUTHOR]

This paper presents a recently developed full kinetic particle simulation code package, which is a two-dimensional highly integrated and universal framework for low-temperature plasma simulation on both Cartesian and axisymmetric coordinate systems. This code package is named CFIRM, since it is designed based on the continuous Galerkin immersed-finite-element (IFE) particle-in-cell (PIC) model with the polynomial-preserving-recovery (PPR) technique and the Monte-Carlo-collision (MCC) method. Both the traditional and implicit PIC methods were implemented in the package. Incorporating the advantages of all these methods together, the CFIRM code can adopt explicit or implicit PIC schemes to track the motion trajectory of charged particles and deal with the collisions between plasma and neutral gas. Additionally, it can conveniently handle complex interface problems on structured grids. The CFRIM code has excellent versatility in low-temperature plasma simulation and can easily extend to various particle processing modules, such as the variable weights and adaptive particle management algorithms which were incorporated into this code to reduce the memory utilization rate. The implementation for the main algorithms and the overall simulation framework of the CFIRM code package are rigorously described in details. Several simulations of the benchmark cases are carried out to validate the reliability and accuracy of the CFIRM code. Moreover, two typical low-temperature plasma engineering problems are simulated, including a hall thruster and a capacitively coupled plasma reactor, which demonstrates the applicability of this code package. [ABSTRACT FROM AUTHOR]

The analytical capabilities of a nitrogen-sustained high-power microwave inductively coupled atmospheric-pressure plasma mass spectrometer (N2 MICAP-MS) were investigated using solution nebulization with and without aerosol desolvation. The reduced solvent load for the desolvated aerosol and the increased aerosol transfer resulted in a signal enhancement of ten times for most elements in samples without a significant amount of dissolved solids. An exception was boron, whose signal decreased by a factor of seven when a desolvator was used. To compare the accuracy, reproducibility, and matrix susceptibility of the N2 MICAP-MS, the mass fractions of 30 elements were determined in two certified water reference materials using external calibration and standard addition. The results were generally found to agree within 10% of the certified reference values with a maximum deviation of 17% in the case of 64Zn. Comparing external calibration and standard addition provided comparable results regardless of the sample introduction method. To assess the extent of matrix effects, multi-element standard solutions were doped with amounts of up to 100 mg kg−1 calcium. This resulted in a signal suppression of up to 30% and 70% for conventional nebulization and aerosol desolvation, respectively. This substantially reduced the improvement in sensitivity observed for the desolvated aerosol. To further investigate the fundamental characteristics of the N2 MICAP-MS, the plasma gas temperature was estimated using three methods. The determined temperatures for the two most reliable methods were in the range of ∼5000–6000 K and were found to be independent of the sample introduction method and similar to those of an Ar ICP. [ABSTRACT FROM AUTHOR]

Laser-induced plasma ignition is a new ignition method to achieve stable and reliable ignition of liquid rocket engines. It has the advantages of accurate and controllable ignition position, broadening ignition lean-burn limit and small disturbance to flow field. In this paper, the laser ignition process and combustion characteristics of gas oxygen/gas methane under rocket engine conditions are studied from four aspects, namely different ignition positions, ignition energy, fuel-oxygen momentum ratio and chamber pressure. Using a high-speed camera, the dynamic process of ignition was captured by the shadow method, and the generation and propagation of laser-induced flame nuclei were recorded. The results show that at the airflow velocity of 300–400 m/s, the time required for the flame kernel to develop to the entire combustion chamber is about 300 μs, and the time for the flame to reach a steady state is tens of milliseconds. When the ignition energy is increased by 1.5 times, the time required for the flame kernel to develop from the recirculation zone to the mainstream zone is shortened to 1/3 of the original; with the increase of the fuel-oxygen momentum ratio, the shape of the initial flame kernel changes from round to oval, and the development speed of the flame kernel also increases. The fuel-oxygen momentum ratio increases from 0.59 to 2.75, and the time required for the flame kernel to develop from the recirculation zone to the mainstream zone decreases from 167 μs to 56 μs＀ Except chamber pressure, other factors have no effect on the pressure rise rate of the ignition process, and the higher the chamber pressure, the faster the pressure rise rate; in order to avoid deflagration, the shear layer is more suitable as the ignition position. With the increase of ignition energy, fuel-oxygen momentum ratio and chamber pressure, the development speed of flame kernel increases, but the shape and development process of flame kernel will be different under the influence of different factors. • Laser ignition is carried out in a highly complex engine environment with high pressure and non-premixed flow field. • The higher the chamber pressure is, the faster the pressure rises during ignition. In order to avoid deflagration, the shear layer is more suitable for ignition. • The trend of flame kernel development rate increases with the increase of ignition energy, fuel-oxygen momentum ratio and chamber pressure. [ABSTRACT FROM AUTHOR]

Cellulose is an abundant natural polymer and is thus promising for enforcing biobased plastics. A broader application of cellulose fibers as a filler in polymer composites is limited because of their hydrophilicity and hygroscopicity. The recent scientific literature on plasma methods for the hydrophobization of cellulose materials is reviewed and critically evaluated. All authors focused on the application of plasmas sustained in fluorine or silicon-containing gases, particularly tetrafluoromethane, and hexamethyldisiloxane. The cellulose materials should be pre-treated with another plasma (typically oxygen) for better adhesion of the silicon-containing hydrophobic coating. In contrast, deposition of fluorine-containing coatings does not require pre-treatment, which is explained by mild etching of the cellulose upon treatment with F atoms and ions. The discrepancy between the results reported by different authors is explained by details in the gas phase and surface kinetics, including the heating of samples due to exothermic surface reactions, desorption of water vapor, competition between etching and deposition, the influence of plasma radiation, and formation of dusty plasma. Scientific and technological challenges are highlighted, and the directions for further research are provided. [ABSTRACT FROM AUTHOR]