Search

The uptake of variable megawatts from photovoltaics (PV) challenges distribution system operation. The primary problem is significant voltage rise in the feeder that forces existing voltage control devices such as on-load tap-changers and line voltage regulators to operate continuously. The consequence is the deterioration of the operating life of the voltage control mechanism. Also, conventional non-coordinated reactive power control can result in the operation of the line regulator at its control limit (runaway condition). This paper proposes an optimal reactive power coordination strategy based on the load and irradiance forecast. The objective is to minimize the number of tap operations so as not to reduce the operating life of the tap control mechanism and avoid runaway. The proposed objective is achieved by coordinating various reactive power control options in the distribution network while satisfying constraints such as maximum power point tracking of PV and voltage limits of the feeder. The option of voltage support from PV plant is also considered. The problem is formulated as constrained optimization and solved through the interior point technique. The effectiveness of the approach is demonstrated in a realistic distribution network model. [ABSTRACT FROM PUBLISHER]

In telecom applications, the vision for a total power conversion efficiency from the mains to the output of point-of-load (PoL) converters of 95% demands optimization of every conversion step, i.e., the power factor correction (PFC) rectifier front-end should show an outstanding efficiency in the range of 99%. For recently discussed 400-V dc distribution bus voltages, a buck-type PFC rectifier is a logical solution. In this paper, an efficiency-optimized, 98.8% efficient, 5-kW three-phase buck-type PFC rectifier with 400-V output is presented. Methods for calculating losses of all components are described and are used to optimize the converter design for efficiency at full load. Special attention is paid to semiconductor losses, which are shown to be dominant, with the parasitic device capacitance losses being a significant component. The calculation of these parasitic capacitance losses is treated in detail, and the charge-balance approach used is verified. A prototype of the proposed rectifier is constructed which verifies the accuracy of the models used for loss calculation and optimization. [ABSTRACT FROM AUTHOR]