Search

The west coast and islands of Taiwan have abundant wind resource, which offers a great opportunity for large-scale offshore wind power generation. In Taiwan, the first stage of the offshore wind farms at the Jhang-Bin and Penghu areas has been planned. In particular, the Jhang-Bin wind farm will become the first and one of the largest wind farms in Taiwan. Therefore, its impacts on system operation and security have to be investigated and studied in advance. Following a general connection design discussion, this paper is consist of four major system impact analyses: load flow, fault current, voltage variation, and transient stability. Moreover, three types of typical wind turbines have been adopted in this paper in order to compare their performances on the wind farm integration system. From the simulation results, some significant conclusion and recommendations have been extracted, which would contribute to the first offshore wind farm development in Taiwan. [ABSTRACT FROM AUTHOR]

This paper presents the effects of installing variable current-limit reactors (CLRs) and adjusting load tap changers (LTCs) on the performance of a commercial wind farm in Taiwan using computer simulations. The companion paper (Part I) demonstrates the field-measured results, simulation model, and simulation results of the studied Jang-Bin wind farm with 23 2-MW doubly fed induction generator-type wind turbine generators connected to the utility system through a 23/161-kV 60-MVA step-up main transformer (MT) from six feeders. Six CLRs, which were originally designed to limit short-circuit currents under faulted conditions, are connected in series with the six feeders. The LTCs of the MT are used to adjust/regulate the secondary-side voltage at the 23-kV bus. Some simulated steady-state and transient results of the studied wind farm with variable values of the proposed CLRs and LTCs are analyzed and compared. [ABSTRACT FROM PUBLISHER]

Reliable control and optimal operation of the doubly fed induction generator (DFIG) is necessary to ensure high efficiency and high load-following capability in modern wind power plants. This is often difficult to achieve using conventional linear controllers, as wind power plants are nonlinear and contain many uncertainties. Furthermore, unbalanced conditions often exist on the power network, which can degrade DFIG system performance. Considering the nonlinear DFIG dynamics, this paper proposes a nonlinear modeling technique for DFIG, meanwhile taking into account unbalanced grid conditions. Then, a nonlinear model predictive controller is derived for power control of DFIG. The prediction is calculated based on the input-output feedback linearization (IOFL) scheme. The control is derived by optimization of an objective function that considers both economic and tracking factors under realistic constraints. The simulation results show that the proposed controller can effectively reduce wear and tear of generating units under normal grid conditions, and reduce the rotor over-current under unbalanced grid conditions, thereby improving the ability of grid-connected wind turbines to withstand grid voltage faults. [ABSTRACT FROM AUTHOR]

This paper presents both steady-state performance and dynamic simulations of a commercial wind farm (WF) in Taiwan through field measurement results and computer simulations. The companion paper in Part II discusses the dynamic and transient analyzed results of using current-limit reactors (CLRs) and load tap changers on power-quality improvement of the studied WF. With 23 2-MW DFIG-type wind turbine generators, this WF is connected to the 161-kV extra high-voltage substation of Taiwan Power System through a 23/161-kV 60-MVA step-up main transformer from six feeders with CLRs. Through comparing field measured results, this paper establishes a simulation model to simulate and analyze the steady-state and dynamic characteristics of the studied WF which is subject to disturbance conditions under different wind-speed conditions. [ABSTRACT FROM PUBLISHER]

In this paper, a flux-coupling-type superconducting fault current limiter (SFCL) is suggested to protect a 15-MW class doubly fed induction generator (DFIG)-based wind farm. Detailed conceptual design and performance evaluation of the SFCL are conducted. From the technical requirements and operational parameters of theDFIGwind farm, a 35-kV/500-A flux-coupling-type SFCL is designed, taking into consideration: 1) the winding type, core selection, and inductance values of the coupling transformer (CT); and 2) the structural style, tape length, and quenching resistance of the superconducting coil (SC). By use of different simulation tools, the electrical and electromagnetic characteristics of the SFCL are evaluated. The results show that the maximum magnetic field of the CT is 2.4 T, and the ac loss of the SC is 0.51W. Not only the electromagnetic properties and loss of the SFCL are acceptable, but also using the SFCL in the wind farm enables to suppress the fault current, compensate the voltage sag, and mitigate the wind power fluctuation. Thus, the robustness of the DFIG-based wind farm against the fault is enhanced, and the effectiveness of the proposed SFCL design is verified. [ABSTRACT FROM AUTHOR]

We investigate the potential of using previewed wind speed measurements for damping wind turbine fore-aft tower oscillations. Using recent results on continuous-time H^2 preview control, we develop a numerically efficient framework for the feedforward controller synthesis. One of the major benefits of the proposed framework is that it allows us to account for measurement distortion. This results in a controller that is tailored to the quality of the previewed data. A simple yet meaningful parametric model of the measurement distortion is proposed and used to analyze the effects of distortion characteristics on the achievable performance and on the required length of preview. We demonstrate the importance of accounting for the distortion in the controller synthesis and quantify the potential benefits of using previewed information by means of simulations based on real-world turbine data. [ABSTRACT FROM PUBLISHER]

Optimally operating an integrated electricity-gas system (IEGS) is significant for the energy sector. However, the IEGS operation model's nonconvexity makes it challenging to solve the optimal dispatch problem in the IEGS. This letter proposes a new Benders decomposition-based (IBD) algorithm catering to a commonly used steady-state dispatch model of the IEGS. This IBD algorithm leverages a refined decomposition structure where the subproblems are linear and ready to be solved in parallel. We analytically compare our IBD algorithm with an existing Benders decomposition algorithm and a typical piecewise linearization method. Case studies have substantiated the higher computational efficiency of our IBD algorithm. [ABSTRACT FROM AUTHOR]