Search

The increasing Photovoltaic (PV) penetration in residential Low Voltage (LV) networks is likely to result in a voltage rise problem. One of the potential solutions to deal with this problem is to adopt a distribution transformer fitted with an On-Load Tap Changer (OLTC). The control of the OLTC in response to local measurements reduces the need for expensive communication channels and remote measuring devices. However, this requires developing an advanced decision-making algorithm to estimate the existence of voltage issues and define the best set point of the OLTC. This paper presents a decentralized data-driven control approach to operate the OLTC using local measurements at a distribution transformer (i.e., active power and voltage at the secondary side of the transformer). To do so, Monte Carlo simulations are utilized offline to produce a comprehensive dataset of power flows throughout the distribution transformer and customers' voltages for different PV penetrations. By the application of the curve-fitting technique to the resulting dataset, models to estimate the maximum and the minimum customers' voltages are defined and embedded into the control logic to manage the OLTC in real time. The application of the approach to a real UK LV feeder shows its effectiveness in improving PV hosting capacity without the need for remote monitoring elements. [ABSTRACT FROM AUTHOR]

Conservation voltage reduction (CVR) has been traditionally applied adopting moderate settings at primary substations and when distributed generation was uncommon. However, as new infrastructure is deployed across European-style medium voltage (MV) and low voltage (LV) networks, driven by increasing photovoltaic (PV) penetration levels, the opportunity arises to develop more advanced CVR schemes. This paper proposes a centralized, three-phase AC optimal power flow (OPF)-based CVR scheme that, using monitoring, on-load tap changers and capacitors across MV and LV, actively manages voltages to minimize energy consumption, even with high PV penetration, while considering MV–LV constraints. To tackle scalability issues brought by discrete variables, a two-stage approach is proposed to solve the OPF as a non-linear programming problem (relaxing integer variables). A process that continuously checks customer voltages is adopted to trigger the optimization only when needed. Moreover, CVR benefits are not only quantified at a network level but also for customers, providing useful insights to policy makers. The proposed control is assessed using a realistic, unbalanced U.K. residential MV–LV network (2,400+ customers) with high PV penetration, and 1-min resolution time-varying profiles and load models. Results demonstrate that the proposed control effectively coordinates voltage regulation in MV and LV levels throughout the day, minimizing energy imports for all customers. [ABSTRACT FROM AUTHOR]

This two-part paper surveys the frequency and voltage control ancillary services in power systems from various parts of the world. In this second part, essential economic features that must be taken into account when designing markets for ancillary services are first discussed. The methods adopted in eight different systems (Australia, France, Germany, Great Britain, New Zealand, PJM, Spain, and Sweden) for trading frequency and voltage control ancillary services are then compared. Lastly, new indicators for comparing volumes and costs of ancillary services across systems are proposed and calculated for the systems included in this survey. The companion paper surveys the technical features of these ancillary services. [ABSTRACT FROM AUTHOR]

This paper presents a comparison of two forms of cable connection of a distant offshore wind farm to a transmission system: AC and HVDC. The requirements of relevant industry standards in Great Britain (GB) that drive a connection design and, hence, its costs are highlighted along with an analysis of the ways in which AC cable connections might be made to comply while facilitating the export of active power. Dynamic studies investigating responses to grid-side short-circuit faults show that, in the particular scenarios studied, an AC connection of a wind farm in place of a large synchronous generator is marginally detrimental while an HVDC connection is beneficial. A comparison of costs shows that the crossover distance at which HVDC is cheaper than AC for wind farms of different sizes occurs at longer distances than have hitherto commonly been assumed, and AC connections benefit from reactive compensation not only at the point of common coupling and wind farm end, but also at the connection midpoint. [ABSTRACT FROM AUTHOR]

The decommissioning of synchronous generators, and their replacement by decoupled renewable power plants, has a significant impact on the transient stability performance of a power system. This paper concerns with an investigation of the degree of transient stability enhancement that can be achieved in power systems with high shares (e.g., around 75%) of wind generation. It is considered that the wind generators can work either under the principle of current control or under the principle of fast local voltage control. In both cases, a power–angle modulation (PAM) controller is superimposed on the current control loops of the grid side converters of the wind generators. The investigation of the degree of enhancement takes into account different approaches of the tuning of PAM. It considers a simple approach in the form of parametric sensitivity, and also a sophisticated approach in the form of a formal optimization problem. Besides, the paper gives insight on what is a suitable objective function of the optimization problem, which entails the best performance of PAM. The whole investigation is conducted based on a synthetic model of the Great Britain (GB) system [ABSTRACT FROM AUTHOR]

• The proposed STCD scheme coordinates all generator OLTC's tap changing actions under security and optimization rules for achieving uniform grid voltage and maintaining grid voltage stability. • Optimization rules are applied to determine most effective tap changing actions for individual OLTCs using static data "volts change per tap" and avoid grid unnecessary MVar circulation. • Security rules are applied to calculate secured tap change limits for individual OLTCs maintaining sufficient safety margin for all individual generators with various reactive power output levels. • The proposed STCD schemes is effective in securely regulating grid voltage to target values and economically managing reactive sharings amongst the generators; this is verified in the real GB southeast coast grid model. To regulate transmission network voltage within statutory limits, transmission system operators (TSO) can issue instructions to the grid synchronized generators to simultaneously change their transformer tap positions, and these instructions are normally preceded by advance notice and executed at the required time. This operation action is known as "Simultaneous Tap Change Dispatch" (STCD). This paper presents a security and optimization rule-based generator Simultaneous Tap Change Dispatch (STCD) scheme, which aims to maintain system wide-area voltage stability through effective and fast voltage regulation, and to minimize the total amount of reactive power utilization; thus, indirectly reduces the line losses. Technical implementation of the proposed STCD is discussed, and the costs of MVar utilization by the STCD is compared with the employment of new shunt reactors. The proposed STCD scheme is validated in a DIgSILENT Power Factory platform to simulate a real regional system model in Great Britain (GB). And, the effectiveness of STCD scheme in transmission voltage regulation, generator MVar optimization, and operational security are verified by comparing to the baseline (a system with uncoordinated schemes). [ABSTRACT FROM AUTHOR]

This paper investigates the possible options for achieving a substantial reduction in a substation footprint using air-insulated switchgear as a more environmentally-friendly alternative to gas-insulated substations that use SF6 gas. Adopting a new approach to surge arrester location and numbers, International Electrotechnical Commission (IEC) minimum clearances can be successfully selected instead of the maximum clearances as currently adopted by many utilities, as is the case in the UK. In addition, innovative alternative compact busbar arrangements using vertical and delta configurations have been proposed by the authors. A further opportunity for compaction is offered by the application of compact and integrated technology offered from several manufacturers. The full overvoltage control within the entire substation under any surge condition is a key aspect of the feasibility of this type of substation. This work demonstrates that the new design option can be an attractive alternative for future substation configuration with minimum footprint. [ABSTRACT FROM AUTHOR]