Search

Recent advances in lithium-ion battery modeling suggest unequal but controlled and carefully timed charging of individual cells by reduce degradation. This paper compares anode-side film formation for a standard equalization scheme versus unequal charging through switches that are controlled by deterministic dynamic programming (DDP) and DDP-inspired heuristic algorithms. A static map for film growth rate is derived from a first-principles battery model adopted from the electrochemical engineering literature. Using this map, we consider two cells that are connected in parallel via relay switches. The key results are the following: 1) optimal unequal and delayed charging indeed reduces film buildup, and 2) a near-optimal state feedback controller can be designed from the DDP solution and film growth rate convexity properties. The simulation results indicate that the heuristic state feedback controller achieves near optimal performance relative to the DDP solution, with significant reduction in film growth compared to charging both cells equally, for several film growth models. Moreover, the algorithms achieve similar film reduction values on the full electrochemical model. These results correlate with the convexity properties of the film growth map. Hence, this paper demonstrates that unequal charging may indeed reduce film growth, given certain convexity properties exist, lending promise to the concept for improving battery pack life. [ABSTRACT FROM PUBLISHER]

This paper presents a generic and comprehensive distribution optimal power flow (DOPF) model that can be used by local distribution companies (LDCs) to integrate their distribution system feeders into a Smart Grid. The proposed three-phase DOPF framework incorporates detailed modeling of distribution system components and considers various operating objectives. Phase specific and voltage dependent modeling of customer loads in the three-phase DOPF model allows LDC operators to determine realistic operating strategies that can improve the overall feeder efficiency. The proposed distribution system operation objective is based on the minimization of the energy drawn from the substation while seeking to minimize the number of switching operations of load tap changers and capacitors. A novel method for solving the three-phase DOPF model by transforming the mixed-integer nonlinear programming problem to a nonlinear programming problem is proposed which reduces the computational burden and facilitates its practical implementation and application. Two practical case studies, including a real distribution feeder test case, are presented to demonstrate the features of the proposed methodology. The results illustrate the benefits of the proposed DOPF in terms of reducing energy losses while limiting the number of switching operations. [ABSTRACT FROM AUTHOR]

This paper provides the comprehensive development procedures and mathematical model of an adjustable speed drive (ASD) for steady-state solutions, transient trajectories, and local stability based on a Floquet multiplier theory. A complete representation of the ASD is employed, which includes the dynamic equation of the dc link capacitor and the detailed models of the diode rectifier and of the pulse width modulated inverter. The power electronic switches are efficiently represented through smooth functions that allow a larger integration step to be used without the loss of precision in the solution. An efficient technique in the time domain for the computation of the periodic steady-state solution of electric systems, including ASDs based on a discrete-exponential-expansion matrix and the Poincaré map, is used. The obtained results are validated against the solutions obtained with an implementation using the Power System Blockset of Simulink and against the response obtained by the measurements from a 1.5-kVA ASD experimental setup system. [ABSTRACT FROM AUTHOR]

Effective photovoltaic power conditioning requires efficient power conversion and accurate maximum power point tracking to counteract the effects of panel mismatch, shading, and general variance in power output during a daily cycle. In this paper, the authors propose an integrated boost resonant converter with low component count, galvanic isolation, simple control, as well as high efficiency across a wide input and load range. Provided is a discussion of the converter synthesis, key operational features, converter design procedure, and loss analysis, as well as experimental verification by way of a 250-W prototype with a California Energy Commission efficiency of 96.8%. [ABSTRACT FROM AUTHOR]

In medium-/high-power inverters, optimal pulse-width modulation (OPWM) is often used to reduce the switching frequency and at the same time, realize selective harmonic elimination (SHE). For both two-level and multilevel inverters, most selective harmonic elimination (SHE) studies are based on solving multiple variable high-order nonlinear equations. Furthermore, for multilevel inverters, SHE has been often studied based on the assumption of balanced dc levels and single switching per level. In this paper, the authors further developed harmonics injection and equal area criteria-based four-equation method to realize OPWM for two-level inverters and multilevel inverters with unbalanced dc sources. For the cases, where only small number of voltage levels are available, weight oriented junction point distribution is utilized to enhance the performance of the four-equation method. A case study of multilevel inverter at low-modulation index is used as an example. Compared with existing methods, the proposed method does not involve complex equation groups and is much easier to be utilized in the case of large number of switching angles, or multiple switching angles per voltage level in multilevel inverters. [ABSTRACT FROM AUTHOR]

Multilevel inverters introduce harmonics to the network besides their remarkable advantages. Total harmonic distortion (THD) is one of the most important indexes to evaluate the harmonic contents of waveforms. The conventional method of line-voltage THD calculation gives approximate answers, because high-order harmonics are ignored. In this paper, an analytical algebraic method based on formulating the line-voltage THD of multilevel inverters with unequal dc sources is presented. This method, which is general and applicable to each number of switching angles, is implemented to a five-level inverter with staircase waveform as a case study. The implementing process of this method can be easily repeated for each number of levels. The accuracy of the proposed method is illustrated in comparison with the approximate method. Some advantages of the extracted formulas of line-voltage THD are simplicity and rapidity in calculations, considering all harmonics and the possibility of finding optimal switching angles analytically. Experimental results are presented to validate the theory. [ABSTRACT FROM PUBLISHER]

This paper presents a new three-phase step-up dc–dc converter with a three-phase high-frequency (HF) isolation transformer in an average current-mode controlled closed loop. This converter was developed for industrial applications where the dc input voltage is lower than the output voltage, for instance, in installations fed by battery units, photovoltaic arrays, or fuel cell systems. The converter's main characteristics are reduced input ripple current, step-up voltage, HF transformer, reduced output-voltage ripple due to three-pulse output current, and the presence of only three active switches connected to the same reference, this being a main advantage of this converter. By means of a specific switch modulation, the converter allows two operational regions, each one depending upon the number of switches in overlapping conditions—if there are two switches, it is called R2 region, and if there are three switches, it is called R3 region. An average current-mode control strategy is applied to input-current and output-voltage regulation. Theoretical expressions and experimental results are presented for a 6.8-kW prototype, operating in the R2 region, and for a 3.4-kW prototype, operating in the R3 region, both in continuous conduction mode. [ABSTRACT FROM PUBLISHER]

In this paper, the method of reducing the rise time of high-voltage pulse transformer output rectangular pulses using a magnetic compression switch has been studied. An equivalent circuit consisting of pulse transformer and magnetic switch was used to describe the behavior of a transformer operating with magnetic switch. Meanwhile, four simplified equivalent sub-circuits and corresponding differential calculation models were used to analysis the influence of the magnetic switch module on the waveform characteristics of load resistance. The simulation and experiment results showed that the rise time of rectangular pulses could be reduced from more than 1 ?s to less than 150 ns while keeping pulse duration constant which was considered as the principle of rectangular pulse sharpening. Moreover, the pulse waveform performance on load resistance was determined by the pulse transformer, magnetic switch module and their coupling effects. [ABSTRACT FROM AUTHOR]