Search

Purpose: Paper-based artifacts hold significant cultural and social values. However, paper is intrinsically fragile to microorganisms, such as mold, due to its cellulose composition, which can serve as a microorganisms' nutrient source. Mold not only can damage papers' structural integrity and pose significant challenges to conservation works but also may subject individuals attending the contaminated artifacts to health risks. Current approaches for strain identification usually require extensive training, prolonged time for analysis, expensive operation costs, and higher risks of secondary damage due to sampling. Thus, in current conservation practices with mold-contaminated artifacts, little pre-screening or strain identification was performed before mold removal, and the cleaning techniques are usually broad-spectrum rather than strain-specific. With deep learning showing promising applications across various domains, this study investigated the feasibility of using a convolutional neural network (CNN) for fast in-situ recognition and classification of mold on paper. Methods: Molds were first non-invasively sampled from ancient Xuan Paper-based Chinese books from the Qing and Ming dynasties. Strains were identified using molecular biology methods and the four most prevalent strains were inoculated on Xuan paper to create mockups for image collection. Microscopic images of the molds as well as their stains situated on paper were collected using a compound microscope and commercial microscope lens for cell phone cameras, which were then used for training CNN models with a transfer learning scheme to perform the classification of mold. To enable involvement and contribution from the research community, a web interface that actuates the process while providing interactive features for users to learn about the information of the classified strain was constructed. Moreover, a feedback functionality in the web interface was embedded for catching potential classification errors, adding additional training images, or introducing new strains, all to refine the generalizability and robustness of the model. Results & Conclusion: In the study, we have constructed a suite of high-confidence classification CNN models for the diagnostic process for mold contamination in conservation. At the same time, a web interface was constructed that allows recurrently refining the model with human feedback through engaging the research community. Overall, the proposed framework opens new avenues for effective and timely identification of mold, thus enabling proactive and targeted mold remediation strategies in conservation. [ABSTRACT FROM AUTHOR]

In an era overwhelmed by academic big data, students grapple with identifying academic papers that resonate with their learning objectives and research interests, due to the sheer volume and complexity of available information. This study addresses the challenge by proposing a novel academic paper recommendation system designed to enhance personalized learning through the nuanced understanding of academic social networks. Utilizing the theory of social homogeneity, the research first constructs a sophisticated academic social network, capturing high-order social relationships, such as co-authorship and advisor–advisee connections, through hypergraph modeling and advanced network representation learning techniques. The methodology encompasses the development and integration of a hypergraph convolutional neural network and a contrastive learning framework to accurately model and recommend academic papers, focusing on aligning with students' unique preferences and reducing reliance on sparse interaction data. The findings, validated across multiple real-world datasets, demonstrate a significant improvement in recommendation accuracy, particularly in addressing the cold-start problem and effectively mapping advisor–advisee relationships. The study concludes that leveraging complex academic social networks can substantially enhance the personalization and precision of academic paper recommendations, offering a promising avenue for addressing the challenges of academic information overload and fostering more effective personalized learning environments. [ABSTRACT FROM AUTHOR]

The research groups in computer vision, graphics, and machine learning have dedicated a substantial amount of attention to the areas of 3D object reconstruction, augmentation, and registration. Deep learning is the predominant method used in artificial intelligence for addressing computer vision challenges. However, deep learning on three-dimensional data presents distinct obstacles and is now in its nascent phase. There have been significant advancements in deep learning specifically for three-dimensional data, offering a range of ways to address these issues. This study offers a comprehensive examination of the latest advancements in deep learning methodologies. We examine many benchmark models for the tasks of 3D object registration, augmentation, and reconstruction. We thoroughly analyse their architectures, advantages, and constraints. In summary, this report provides a comprehensive overview of recent advancements in three-dimensional deep learning and highlights unresolved research areas that will need to be addressed in the future. [ABSTRACT FROM AUTHOR]

Herein, the challenge of accurately classifying the manufacturing origin of printing paper, including continent, country, and specific product, was addressed. One-dimensional convolutional neural network (1D CNN) models trained on infrared (IR) spectrum data acquired from printing paper samples were used for the task. The preprocessing of the IR spectra through a second-derivative transformation and the restriction of the spectral range to 1800 to 1200 cm-1 improved the classification performance of the model. The outcomes were highly promising. Models trained on second-derivative IR spectra in the 1800 to 1200-cm-1 range exhibited perfect classification for the manufacturing continent and country, with an impressive F1 score of 0.980 for product classification. Notably, the developed 1D CNN model outperformed traditional machine learning classifiers, such as support vector machines and feed-forward neural networks. In addition, the application of data point attribution enhanced the transparency of the decision-making process of the model, offering insights into the spectral patterns that affect classification. This study makes a considerable contribution to printing paper classification, with potential implications for accurate origin identification in various fields. [ABSTRACT FROM AUTHOR]

Medical imaging refers to the process of obtaining images of internal organs for therapeutic purposes such as discovering or studying diseases. The primary objective of medical image analysis is to improve the efficacy of clinical research and treatment options. Deep learning has revamped medical image analysis, yielding excellent results in image processing tasks such as registration, segmentation, feature extraction, and classification. The prime motivations for this are the availability of computational resources and the resurgence of deep convolutional neural networks. Deep learning techniques are good at observing hidden patterns in images and supporting clinicians in achieving diagnostic perfection. It has proven to be the most effective method for organ segmentation, cancer detection, disease categorization, and computer-assisted diagnosis. Many deep learning approaches have been published to analyze medical images for various diagnostic purposes. In this paper, we review the work exploiting current state-of-the-art deep learning approaches in medical image processing. We begin the survey by providing a synopsis of research works in medical imaging based on convolutional neural networks. Second, we discuss popular pretrained models and general adversarial networks that aid in improving convolutional networks' performance. Finally, to ease direct evaluation, we compile the performance metrics of deep learning models focusing on COVID-19 detection and child bone age prediction. [ABSTRACT FROM AUTHOR]

In the final manuscript [[33]], presented as a communication, the author indicates that unmanned aircraft systems (UASs), commonly referred to as drones, are an emerging technology that has changed the way that many industries conduct business. When used on a state-by-state basis, the normalized UAS adoption index shows that there are regional differences in UAS adoption, with western and eastern states having higher UAS adoption rates and central states having significantly lower UAS adoption rates. The aim of this second I Eng i Special Issue is to collect experimental and theoretical re-search relating to engineering science and technology. Telecommunication companies collect a deluge of subscriber data without retrieving substantial information. [Extracted from the article]

One of the pandemics that have caused many deaths is the Coronavirus disease 2019 (COVID-19). It first appeared in late 2019, and many deaths are increasing day by day until now. Therefore, the early diagnosis of COVID-19 has become a salient issue. Additionally, the current diagnosis methods have several demerits, and a new investigation is required to enhance the diagnosis performance. In this paper, a set of phases are performed, such as collecting data, filtering and augmenting images, extracting features, and classifying ECG images. The data were obtained from two publicly available ECG image datasets, and one of them contained COVID ECG reports. A set of preprocessing methods are applied to the ECG images, and data augmentation is performed to balance the ECG images based on the classes. A deep learning approach based on a convolutional neural network (CNN) is performed for feature extraction. Four different pre-trained models are applied, such as Vgg16, Vgg19, ResNet-101, and Xception. Moreover, an ensemble of Xception and the temporary convolutional network (TCN), which is named ECGConvnet, is proposed. Finally, the results obtained from the former models are fed to four main classifiers. These classifiers are softmax, random forest (RF), multilayer perception (MLP), and support vector machine (SVM). The former classifiers are used to evaluate the diagnosis ability of the proposed methods. The classification scenario is based on fivefold cross-validation. Seven experiments are presented to evaluate the performance of the ECGConvnet. Three of them are multi-class, and the remaining are binary class diagnosing. Six out of seven experiments diagnose COVID-19 patients. The aforementioned experimental results indicated that ECGConvnet has the highest performance over other pre-trained models, and the SVM classifier showed higher accuracy in comparison with the other classifiers. The resulting accuracies from ECGConvnet based on SVM are (99.74%, 98.6%, 99.1% on the multi-class diagnosis tasks) and (99.8% on one of the binary-class diagnoses, while the remaining achieved 100%). It is possible to develop an automatic diagnosis system for COVID based on deep learning using ECG data. [ABSTRACT FROM AUTHOR]

10.3390/rs13214334 7 Park S.-H., Yoo J., Son D., Kim J., Jung H.-S. Improved Calibration of Wind Estimates from Advanced Scatterometer MetOp-B in Korean Seas Using Deep Neural Network. Lee and Choi [[4]] proposed a daytime cloud detection algorithm using a multi-temporal Geostationary Korea Multi-Purpose Satellite 2A (GEO-KOMPSAT-2A, GK-2A) dataset. 10.3390/rs13214282 9 Park S.-H., Jung H.-S., Lee S., Kim E.-S. Mapping Forest Vertical Structure in Sogwang-ri Forest from Full-Waveform Lidar Point Clouds Using Deep Neural Network. [Extracted from the article]

Microfluidic paper-based analytical devices (μPADs) have been widely used in point-of-care testing owing to their simple operation, low volume of the sample required, and the lack of the need for an external force. To obtain accurate semi-quantitative or quantitative results, μPADs need to respond to the challenges posed by differences in reaction conditions. In this paper, multi-layer μPADs are fabricated by the imprinting method for the colorimetric detection of C-reactive protein (CRP). Different lighting conditions and shooting angles of scenes are simulated in image acquisition, and the detection-related performance of μPADs is improved by using a machine learning algorithm. The You Only Look Once (YOLO) model is used to identify the areas of reaction in μPADs. This model can observe an image only once to predict the objects present in it and their locations. The YOLO model trained in this study was able to identify all the reaction areas quickly without incurring any error. These reaction areas were categorized by classification algorithms to determine the risk level of CRP concentration. Multi-layer perceptron, convolutional neural network, and residual network algorithms were used for the classification tasks, where the latter yielded the highest accuracy of 96%. It has a promising application prospect in fast recognition and analysis of μPADs. [ABSTRACT FROM AUTHOR]

Raman spectroscopy is an effective method for diagnosing the aging state of transformer oil-paper insulation. Aiming at overcoming the drawback of previous methods that require a large number of training samples, this research proposes a method for aging diagnosis of oil-paper insulation that can be used for few-shot learning. In this study, different Raman spectroscopy samples of aging insulating oil are obtained by accelerated thermal aging experiments. This paper uses identity matrix as node feature, calculates the connection weights between them by Gaussian kernel function, and constructs the graph structure of Raman spectroscopy library. Using graph convolutional neural network (GCN) based on the graph structure, a diagnosis model is established. The diagnostic accuracy rate is as high as 95.5%. This method provides a theoretical basis for establishing a new structured Raman spectroscopy library and assessing the aging state of transformer oil-paper insulation with a small number of training samples. [ABSTRACT FROM AUTHOR]

Detecting insulation performance through testing the Raman spectroscopy of transformer oil is noninvasive and shows great promise in on-site diagnosis. The information, stored in spectra, that may reflect aging states of insulation aims to be effectively unfolded and provides decision support as well. In this article, a transformation method based on intrinsic product arithmetic is used to transform the 1-D Raman spectral data into 2-D image data. With the help of CNN based on the dimensionality expanding method, diagnosis of oil–paper insulation with different aging states based on the Raman spectroscopy was realized. The network-based oil–paper insulation aging diagnosis model has an accuracy of 95% in ten aging categories of 60 test samples and 100% in four aging categories. The result shows the trained CNN was able to identify the differences of transformer oil samples at each aging stage through visualized Raman spectral image. This method provides a more accurate determination method for diagnosing oil-immersed transformers’ aging conditions; it also develops an available method for a more detailed evaluation of insulation aging levels. [ABSTRACT FROM AUTHOR]

To increase crop productivity, recognition of a plant disease is a very pivotal task. The prior identification of plant diseases helps farmers to prevent losses occurred by various types of plant diseases. Manual observation and identification of plant diseases is a very tedious task as it requires a lot of time, money, efforts etc. therefore an automated system is required that efficiently identifies plant disease in a minimum span of time without requiring much efforts. Plant disease have been identified using various techniques such as image segmentation, clustering, convolution neural network, decision trees and many more by determining the patterns of plant images based on their colour, spots, light intensity over a certain period of time by various researchers. This paper aims to portray the techniques formulate in this area. This work infers the major challenges that thus far not explored. [ABSTRACT FROM AUTHOR]

To increase crop productivity, recognition of a plant disease is a very pivotal task. The prior identification of plant diseases helps farmers to prevent losses occurred by various types of plant diseases. Manual observation and identification of plant diseases is a very tedious task as it requires a lot of time, money, efforts etc. therefore an automated system is required that efficiently identifies plant disease in a minimum span of time without requiring much efforts. Plant disease have been identified using various techniques such as image segmentation, clustering, convolution neural network, decision trees and many more by determining the patterns of plant images based on their colour, spots, light intensity over a certain period of time by various researchers. This paper aims to portray the techniques formulate in this area. This work infers the major challenges that thus far not explored. [ABSTRACT FROM AUTHOR]

Municipal papers and polyethylene terephthalate (PET) wastes are primary constituents of municipal solid waste (MSW) which necessitates effective disposal. Co-pyrolysis is an efficient transformation technology for the production of valuable gas and liquid fuels. Therefore, co-pyrolysis characteristics, kinetics, gas and liquid products of cellulose and PET mixtures were investigated in a two-stage reactor by multiple characterizations coupling with deep learning approach. The results indicated that there exhibited positive interaction for cellulose and PET co-pyrolysis in terms of mass difference (δ m) and mass loss rate difference (δ r) between experimental and calculated values. The thermal decomposition process and synergistic effects (δ m and δ r) were accurately predicted by deep learning approaches (R 2 =0.9823–0.9993) using temperature, catalyst, mixing ratio and heating rate variables. Feature importance revealed that the temperature, catalyst, heating rate and mixing ratio were in the descending order to affect the remaining mass from TG curves. And the temperature played a predominant role in synergistic effects. The Flynn-Wall-Ozawa (FWO) method was more suitable for fitting the pyrolysis process to obtain activation energy (E a) with higher R 2 (0.94714–0.99640) compared with Kissinger-Akahira-Sunose (KAS) method. When the mixing ratio of cellulose and PET was 1:1, the E a was significantly reduced to 80.73 KJ/mol, and further reduced to 73.04 KJ/mol by introducing the catalyst, as compared to E a of individual cellulose (178.95 KJ/mol) and PET (198.34 KJ/mol). Co-pyrolysis of cellulose and PET led to a reduction of carbohydrates, furans, alcohols, ketones, and phenols, while the content of acids was remarkably increased which was consistent with the observation in FTIR that the absorption peak of C＝O became sharp and strong. The introduction of ZSM-11 resulted in an increase in aromatics and a decrease in acids content owing to aromatization and deoxygenation. This work is expected to offer beneficial guidance for the efficient disposal of MSW and the application of deep learning methods. [Display omitted] • The interactive pathway for catalytic co-pyrolysis of cellulose and PET was proposed. • The activation energy reached the lowest 73.04 KJ/mol when the mixing ratio was 1:1. • Optimized convolutional neural network predicted synergistic effects with R 2 > 0.99. • Feature importance for TG was temperature > catalyst > heating rate > mixing ratio. [ABSTRACT FROM AUTHOR]

The precision of short-term photovoltaic power forecasts is of utmost importance for the planning and operation of the electrical grid system. To enhance the precision of short-term output power prediction in photovoltaic systems, this paper proposes a method integrating K-means clustering: an improved snake optimization algorithm with a convolutional neural network–bidirectional long short-term memory network to predict short-term photovoltaic power. Firstly, K-means clustering is utilized to categorize weather scenarios into three categories: sunny, cloudy, and rainy. The Pearson correlation coefficient method is then utilized to determine the inputs of the model. Secondly, the snake optimization algorithm is improved by introducing Tent chaotic mapping, lens imaging backward learning, and an optimal individual adaptive perturbation strategy to enhance its optimization ability. Then, the multi-strategy improved snake optimization algorithm is employed to optimize the parameters of the convolutional neural network–bidirectional long short-term memory network model, thereby augmenting the predictive precision of the model. Finally, the model established in this paper is utilized to forecast photovoltaic power in diverse weather scenarios. The simulation findings indicate that the regression coefficients of this method can reach 0.99216, 0.95772, and 0.93163 on sunny, cloudy, and rainy days, which has better prediction precision and adaptability under various weather conditions. [ABSTRACT FROM AUTHOR]

Sensor data fusion analysis is a crucial process that integrates data from multiple sensors to provide more accurate and comprehensive information. This analysis has various applications in fields such as industry, medicine, robotics, transportation, and information systems. The article highlights sixteen high-quality papers that explore different aspects of sensor data fusion, including facial detection, object detection, odometry systems, geospatial data evaluation, and fault detection. The papers demonstrate the potential of sensor data fusion in improving decision-making, efficiency, and productivity in various industries. Future research in this area will focus on miniaturization, multi-sensor systems, and addressing challenges related to data quality in mobile sensors. [Extracted from the article]

CNN has demonstrated remarkable performance in EEG signal detection, yet it still faces limitations in terms of global perception. Additionally, due to individual differences in EEG signals, the generalization ability of epilepsy detection models is week. To address this issue, this paper presents a cross-patient epilepsy detection method utilizing a multi-head self-attention mechanism. This method first utilizes Short-Time Fourier Transform (STFT) to transform the original EEG signals into time-frequency features, then models local information using Convolutional Neural Network (CNN), subsequently captures global dependency relationships between features using the multi-head self-attention mechanism of Transformer, and finally performs epilepsy detection using these features. Meanwhile, this model employs a light multi-head attention mechanism module with an alternating structure, which can comprehensively extract multi-scale features while significantly reducing computational costs. Experimental results on the CHB-MIT dataset show that the proposed model achieves accuracy, sensitivity, specificity, F1 score, and AUC of 92.89%, 96.17%, 92.99%, 94.41%, and 96.77%, respectively. Compared to the existing methods, the method proposed in this paper obtains better performance along with better generalization. [ABSTRACT FROM AUTHOR]

Visual information is important in final approach and landing phases for an approaching aircraft, it presents supplementary source for navigation system, and provides backup guidance when radio navigation fails, or even supports a complete vision‐based landing. Relative position and attitude can be solved from the runway features in the image. Traditional runway detection methods have high latency and low accuracy, which is unable to satisfy the requirements for a safe landing. This paper proposes a real‐time runway detection model, efficient runway feature extractor (ERFE), based on deep convolutional neural network, generating semantic segmentation and feature lines output. In order to evaluate the model's effectiveness, a benchmark is proposed to calculate the actual error between predicted feature line and ground truth one. A novel runway dataset which is based on pictures from Microsoft Flight Simulator 2020 (FS2020), is also proposed in this paper to train and test the model. The dataset will be released at https://www.kaggle.com/datasets/relufrank/fs2020‐runway‐dataset. ERFE shows excellent performance in FS2020 dataset, it gives satisfactory results even for real runway images excluded from our dataset. [ABSTRACT FROM AUTHOR]

Segmentation is crucial in diagnosing retinal diseases by accurately identifiying retinal vessels. This paper addresses the complexity of segmenting retinal vessels, highlighting the need for precise analysis of blood vessel structures. Despite the progress made by convolutional neural networsks (CNNs) in image segmentation, their limitations in capturing the global structure of retinal vsessels and maintaining segmentation continuity present challenges. To tackle these issues, our proposed network integrates graph convolutional networks (GCNs) and attention mechansims. This allows the model to consider pixel relationships and learn vessel graphical structures, significantly improving segmentation accuracy. Additionally, the attentional feature fusion module, including pixel‐wise and channel‐wise attention mechansims within the U‐Net architecture, refines the model's focus on relevant features. This paper emphasizes the importance of continuty preservation, ensuring an accurate representation of pixel‐level information and structural details during sefmentation. Therefore, our method performs as an effective solution to overcome challenges in retinal vessel segmentation. The proposed method outperformed the state‐of‐the‐art approaches on DRIVE (Digital Retinal Images for Vessel Extraction) and STARE (Structed Analysis of the Retina) datasets with accuracies of 0.12% and 0.14%, respecttively. Importantly, our proposed approach excelled in delineating slender and diminutive blood vessels, crucial for diagnosing vascular‐related diseases. Implementation is accessible on https://github.com/CVLab‐SHUT/VGA‐Net. [ABSTRACT FROM AUTHOR]

With the aim of solving the problem of identifying complex underwater acoustic targets using a single signal feature in the Time–Frequency (TF) feature, this paper designs a method that recognizes the underwater targets based on the Delay-Doppler joint feature. First, this method uses symplectic finite Fourier transform (SFFT) to extract the Delay-Doppler features of underwater acoustic signals, analyzes the Time–Frequency features at the same time, and combines the Delay-Doppler (DD) feature and Time–Frequency feature to form a joint feature (TF-DD). This paper uses three types of convolutional neural networks to verify that TF-DD can effectively improve the accuracy of target recognition. Secondly, this paper designs an object recognition model (TF-DD-CNN) based on joint features as input, which simplifies the neural network's overall structure and improves the model's training efficiency. This research employs ship-radiated noise to validate the efficacy of TF-DD-CNN for target identification. The results demonstrate that the combined characteristic and the TF-DD-CNN model introduced in this study can proficiently detect ships, and the model notably enhances the precision of detection. [ABSTRACT FROM AUTHOR]

This document is a guest editorial from the International Journal of Uncertainty, Fuzziness & Knowledge-Based Systems. It discusses the potential of fuzzy-based systems in statistical learning theory and their ability to handle uncertainty and ambiguity in real-time data. The editorial highlights recent advancements in integrating fuzzy systems with deep learning architectures and other machine learning techniques. The special issue aims to explore the intersection of fuzzy logic and statistical learning theory and includes twelve accepted papers that investigate the capabilities of fuzzy-based systems. The document provides a brief summary of each paper, covering topics such as pop-up text recognition, alignment of laser images, knowledge graph reasoning, land use changes, 3D printing in vehicle design, defect detection in electronic components, digital management process improvement, spectrum sharing in IoV, deep clustering for time series data, anti-collision algorithms, missing data filling, and video action recognition. The guest editor expresses gratitude to the authors and reviewers for their contributions and to the Editor-in-Chief for the opportunity to curate the special issue. [Extracted from the article]

In order to accurately estimate the period of X-ray pulsars to improve navigation performance, this paper proposes a pulsar period estimation method based on photon energy using reverse Hilbert coding and double Convolutional Neural Networks (CNNs) discrimination. This method uses photon energy information to perform epoch folding. It converts one-dimensional contour information into two-dimensional image signals through reverse Hilbert curve and recognizes contour image features through CNN models to determine the optimal period. According to the simulation results, the period estimation accuracy of this method is 0.5350 ns, which is 65.71% higher than the χ 2 epoch folding method. The contour phase accuracy is 0.0004767, which is 41.93% higher than the χ 2 epoch folding method. At the same time, the observation time and noise interference that may affect the accuracy of period estimation are also quantitatively analyzed. In addition, in order to simulate real navigation scenarios, this paper also conducts dynamic period estimation experiments on PSR B0531+21 pulsar in a specific period of time. The method proposed in this paper has the advantages of high precision, fast calculation speed, strong anti-interference ability and accurate dynamic period estimation, which can significantly improve the navigation performance of X-ray pulsars. • The proposed period estimation method uses photon energy information for contour weighted folding. • The proposed method uses reverse Hilbert curve to convert one-dimensional contour information into two-dimensional image information. • Convolutional Neural Network models are used to optimize pulsar period estimation. [Display omitted] [ABSTRACT FROM AUTHOR]

Convolutional Neural Networks (CNNs) are a kind of artificial neural network designed to extract features and find out patterns for tasks such as segmentation, recognizing objects, and drawing up classification. Within a CNNs architecture, pooling operations are used until the number of parameters and the computational complexity are reduced. Numerous papers have focused on investigating the impact of pooling on the performance of Convolutional Neural Networks (CNNs), leading to the development of various pooling models. Recently, a fuzzy pooling operation based on type-1 fuzzy sets was introduced to cope with the local imprecision of the feature maps. However, in fuzzy set theory, it is not always accurate to assume that the degree of non-membership of an element in a fuzzy set is simply the complement of the degree of membership. This is due to the potential existence of a hesitation degree, which implies a certain level of uncertainty. To overcome this limitation, intuitionistic fuzzy sets (IFS) were introduced to incorporate the concept of a degree of hesitation. In this paper, we introduce a novel pooling operation based on intuitionistic fuzzy sets to incorporate the degree of hesitation heretofore neglected by a fuzzy pooling operation based on classical fuzzy sets, and we investigate its performance in the context of image classification. Intuitionistic pooling is performed in four steps: bifuzzification (by the transformation of data through the use of membership and non-membership maps), first aggregation (through the transformation of the IFS into a standard fuzzy set, second aggregation (through the transformation and use of a sum operator), and the defuzzification of feature map neighborhoods by using a max operator. IFS pooling is used for the construction of an intuitionistic pooling layer that can be applied as a drop-in replacement for the current, fuzzy (type-1) and crisp, pooling layers of CNN architectures. Various experiments involving multiple datasets demonstrate that an IFS-based pooling can enhance the classification performance of a CNN. A benchmarking study reveals that this significantly outperforms even the most recent pooling models, especially in stochastic environments. [ABSTRACT FROM AUTHOR]

Sign language is an essential means of communication for individuals with hearing disabilities. However, there is a significant shortage of sign language interpreters in some languages, especially in Saudi Arabia. This shortage results in a large proportion of the hearing-impaired population being deprived of services, especially in public places. This paper aims to address this gap in accessibility by leveraging technology to develop systems capable of recognizing Arabic Sign Language (ArSL) using deep learning techniques. In this paper, we propose a hybrid model to capture the spatio-temporal aspects of sign language (i.e., letters and words). The hybrid model consists of a Convolutional Neural Network (CNN) classifier to extract spatial features from sign language data and a Long Short-Term Memory (LSTM) classifier to extract spatial and temporal characteristics to handle sequential data (i.e., hand movements). To demonstrate the feasibility of our proposed hybrid model, we created a dataset of 20 different words, resulting in 4000 images for ArSL: 10 static gesture words and 500 videos for 10 dynamic gesture words. Our proposed hybrid model demonstrates promising performance, with the CNN and LSTM classifiers achieving accuracy rates of 94.40% and 82.70%, respectively. These results indicate that our approach can significantly enhance communication accessibility for the hearing-impaired community in Saudi Arabia. Thus, this paper represents a major step toward promoting inclusivity and improving the quality of life for the hearing impaired. [ABSTRACT FROM AUTHOR]

This paper addresses issues concerning biometric authentication based on handwritten signatures. Our research aimed to check whether a handwritten signature acquired with a mobile device can effectively verify a user's identity. We present a novel online signature verification method using coordinates of points and pressure values at each point collected with a mobile device. Convolutional neural networks are used for signature verification. In this paper, three neural network models are investigated, i.e., two self-made light SigNet and SigNetExt models and the VGG-16 model commonly used in image processing. The convolutional neural networks aim to determine whether the acquired signature sample matches the class declared by the signer. Thus, the scenario of closed set verification is performed. The effectiveness of our method was tested on signatures acquired with mobile phones. We used the subset of the multimodal database, MobiBits, that was captured using a custom-made application and consists of samples acquired from 53 people of diverse ages. The experimental results on accurate data demonstrate that developed architectures of deep neural networks can be successfully used for online handwritten signature verification. We achieved an equal error rate (EER) of 0.63% for random forgeries and 6.66% for skilled forgeries. [ABSTRACT FROM AUTHOR]

Emotion recognition has become increasingly important in the field of Deep Learning (DL) and computer vision due to its broad applicability by using human–computer interaction (HCI) in areas such as psychology, healthcare, and entertainment. In this paper, we conduct a systematic review of facial and pose emotion recognition using DL and computer vision, analyzing and evaluating 77 papers from different sources under Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Our review covers several topics, including the scope and purpose of the studies, the methods employed, and the used datasets. The scope of this work is to conduct a systematic review of facial and pose emotion recognition using DL methods and computer vision. The studies were categorized based on a proposed taxonomy that describes the type of expressions used for emotion detection, the testing environment, the currently relevant DL methods, and the datasets used. The taxonomy of methods in our review includes Convolutional Neural Network (CNN), Faster Region-based Convolutional Neural Network (R-CNN), Vision Transformer (ViT), and "Other NNs", which are the most commonly used models in the analyzed studies, indicating their trendiness in the field. Hybrid and augmented models are not explicitly categorized within this taxonomy, but they are still important to the field. This review offers an understanding of state-of-the-art computer vision algorithms and datasets for emotion recognition through facial expressions and body poses, allowing researchers to understand its fundamental components and trends. [ABSTRACT FROM AUTHOR]

With the continuous development of automotive intelligence, vehicle occupant detection technology has received increasing attention. Despite various types of research in this field, a simple, reliable, and highly private detection method is lacking. This paper proposes a method for vehicle occupant detection using millimeter-wave radar. Specifically, the paper outlines the system design for vehicle occupant detection using millimeter-wave radar. By collecting the raw signals of FMCW radar and applying Range-FFT and DoA estimation algorithms, a range–azimuth heatmap was generated, visually depicting the current status of people inside the vehicle. Furthermore, utilizing the collected range–azimuth heatmap of passengers, this paper integrates the Faster R-CNN deep learning networks with radar signal processing to identify passenger information. Finally, to test the performance of the detection method proposed in this article, an experimental verification was conducted in a car and the results were compared with those of traditional machine learning algorithms. The findings indicated that the method employed in this experiment achieves higher accuracy, reaching approximately 99%. [ABSTRACT FROM AUTHOR]

Radio frequency interference (RFI) significantly hampers the target detection performance of frequency-modulated continuous-wave radar. To address the problem and maintain the target echo signal, this paper proposes a priori assumption on the interference component nature in the radar received signal, as well as a method for interference estimation and mitigation via time–frequency analysis. The solution employs Fourier synchrosqueezed transform to implement the radar's beat signal transformation from time domain to time–frequency domain, thus converting the interference mitigation to the task of time–frequency distribution image restoration. The solution proposes the use of image processing based on the dual-tree complex wavelet transform and combines it with the spatial domain-based approach, thereby establishing a dual-domain fusion interference filter for time–frequency distribution images. This paper also presents a convolutional neural network model of structurally improved UNet++, which serves as the interference estimator. The proposed solution demonstrated its capability against various forms of RFI through the simulation experiment and showed a superior interference mitigation performance over other CNN model-based approaches. [ABSTRACT FROM AUTHOR]

Global Navigation Satellite Systems (GNSS) offer comprehensive position, navigation, and timing (PNT) estimates worldwide. Given the growing demand for reliable location awareness in both indoor and outdoor contexts, the advent of fifth-generation mobile communication technology (5G) has enabled expansive coverage and precise positioning services. However, the power received by the signal of interest (SOI) at terminals is notably low. This can lead to significant jamming, whether intentional or unintentional, which can adversely affect positioning receivers. The diagnosis of jamming types, such as classification, assists receivers in spectrum sensing and choosing effective mitigation strategies. Traditional jamming diagnosis methodologies predominantly depend on the expertise of classification experts, often demonstrating a lack of adaptability for diverse tasks. Recently, researchers have begun utilizing convolutional neural networks to re-conceptualize a jamming diagnosis as an image classification issue, thereby augmenting recognition performance. However, in real-world scenarios, the assumptions of independent and homogeneous distributions are frequently violated. This discrepancy between the source and target distributions frequently leads to subpar model performance on the test set or an inability to procure usable evaluation samples during training. In this paper, we introduce LJCD-Net, a deep adversarial migration-based cross-domain jamming generalization diagnostic network. LJCD-Net capitalizes on a fully labeled source domain and multiple unlabeled auxiliary domains to generate shared feature representations with generalization capabilities. Initially, our paper proposes an uncertainty-guided auxiliary domain labeling weighting strategy, which estimates the multi-domain sample uncertainty to re-weight the classification loss and specify the gradient optimization direction. Subsequently, from a probabilistic distribution standpoint, the spatial constraint imposed on the cross-domain global jamming time-frequency feature distribution facilitates the optimization of collaborative objectives. These objectives include minimizing both the source domain classification loss and auxiliary domain classification loss, as well as optimizing the inter-domain marginal probability and conditional probability distribution. Experimental results demonstrate that LJCD-Net enhances the recognition accuracy and confidence compared to five other diagnostic methods. [ABSTRACT FROM AUTHOR]

Listening to music is a crucial tool for relieving stress and promoting relaxation. However, the limited options available for stress-relief music do not cater to individual preferences, compromising its effectiveness. Traditional methods of curating stress-relief music rely heavily on measuring biological responses, which is time-consuming, expensive, and requires specialized measurement devices. In this paper, a deep learning approach to solve this problem is introduced that explicitly uses convolutional neural networks and provides a more efficient and economical method for generating large datasets of stress-relief music. These datasets are composed of Mel-scaled spectrograms that include essential sound elements (such as frequency, amplitude, and waveform) that can be directly extracted from the music. The trained model demonstrated a test accuracy of 98.7%, and a clinical study indicated that the model-selected music was as effective as researcher-verified music in terms of stress-relieving capacity. This paper underlines the transformative potential of deep learning in addressing the challenge of limited music options for stress relief. More importantly, the proposed method has profound implications for music therapy because it enables a more personalized approach to stress-relief music selection, offering the potential for enhanced emotional well-being. [ABSTRACT FROM AUTHOR]

Deep learning, a crucial technique for achieving artificial intelligence (AI), has been successfully applied in many fields. The gradual application of the latest architectures of deep learning in the field of time series forecasting (TSF), such as Transformers, has shown excellent performance and results compared to traditional statistical methods. These applications are widely present in academia and in our daily lives, covering many areas including forecasting electricity consumption in power systems, meteorological rainfall, traffic flow, quantitative trading, risk control in finance, sales operations and price predictions for commercial companies, and pandemic prediction in the medical field. Deep learning-based TSF tasks stand out as one of the most valuable AI scenarios for research, playing an important role in explaining complex real-world phenomena. However, deep learning models still face challenges: they need to deal with the challenge of large-scale data in the information age, achieve longer forecasting ranges, reduce excessively high computational complexity, etc. Therefore, novel methods and more effective solutions are essential. In this paper, we review the latest developments in deep learning for TSF. We begin by introducing the recent development trends in the field of TSF and then propose a new taxonomy from the perspective of deep neural network models, comprehensively covering articles published over the past five years. We also organize commonly used experimental evaluation metrics and datasets. Finally, we point out current issues with the existing solutions and suggest promising future directions in the field of deep learning combined with TSF. This paper is the most comprehensive review related to TSF in recent years and will provide a detailed index for researchers in this field and those who are just starting out. [ABSTRACT FROM AUTHOR]

Delamination represents one of the most significant and dangerous damages in composite plates. Recently, many papers have presented the capability of structural health monitoring (SHM) techniques for the investigation of structural delamination with various shapes and thickness depths. However, few studies have been conducted regarding the utilization of convolutional neural network (CNN) methods for automating the non-destructive testing (NDT) techniques database to identify the delamination size and depth. In this paper, an automated system qualified for distinguishing between pristine and damaged structures and classifying three classes of delamination with various depths is presented. This system includes a proposed CNN model and the Lamb wave technique. In this work, a unidirectional composite plate with three samples of delamination inserted at different depths was prepared for numerical and experimental investigations. In the numerical part, the guided wave propagation and interaction with three samples of delamination were studied to observe how the delamination depth can affect the scattered and trapped waves over the delamination region. This numerical study was validated experimentally using an efficient ultrasonic guided waves technique. This technique involved piezoelectric wafer active sensors (PWASs) and a scanning laser Doppler vibrometer (SLDV). Both numerical and experimental studies demonstrate that the delamination depth has a direct effect on the trapped waves' energy and distribution. Three different datasets were collected from the numerical and experimental studies, involving the numerical wavefield image dataset, experimental wavefield image dataset, and experimental wavenumber spectrum image dataset. These three datasets were used independently with the proposed CNN model to develop a system that can automatically classify four classes (pristine class and three different delamination classes). The results of all three datasets show the capability of the proposed CNN model for predicting the delamination depth with high accuracy. The proposed CNN model results of the three different datasets were validated using the GoogLeNet CNN. The results of both methods show an excellent agreement. The results proved the capability of the wavefield image and wavenumber spectrum datasets to be used as input data to the CNN for the detection of delamination depth. [ABSTRACT FROM AUTHOR]

In recent years, deep convolutional neural networks (DCNNs) have shown promising performance in medical image analysis, including breast lesion classification in 2D ultrasound (US) images. Despite the outstanding performance of DCNN solutions, explaining their decisions remains an open investigation. Yet, the explainability of DCNN models has become essential for healthcare systems to accept and trust the models. This paper presents a novel framework for explaining DCNN classification decisions of lesions in ultrasound images using the saliency maps linking the DCNN decisions to known cancer characteristics in the medical domain. The proposed framework consists of three main phases. First, DCNN models for classification in ultrasound images are built. Next, selected methods for visualization are applied to obtain saliency maps on the input images of the DCNN models. In the final phase, the visualization outputs and domain-known cancer characteristics are mapped. The paper then demonstrates the use of the framework for breast lesion classification from ultrasound images. We first follow the transfer learning approach and build two DCNN models. We then analyze the visualization outputs of the trained DCNN models using the EGrad-CAM and Ablation-CAM methods. We map the DCNN model decisions of benign and malignant lesions through the visualization outputs to the characteristics such as echogenicity, calcification, shape, and margin. A retrospective dataset of 1298 US images collected from different hospitals is used to evaluate the effectiveness of the framework. The test results show that these characteristics contribute differently to the benign and malignant lesions' decisions. Our study provides the foundation for other researchers to explain the DCNN classification decisions of other cancer types. [ABSTRACT FROM AUTHOR]

The fetal electrocardiogram (FECG) records changes in the graph of fetal cardiac action potential during conduction, reflecting the developmental status of the fetus in utero and its physiological cardiac activity. Morphological alterations in the FECG can indicate intrauterine hypoxia, fetal distress, and neonatal asphyxia early on, enhancing maternal and fetal safety through prompt clinical intervention, thereby reducing neonatal morbidity and mortality. To reconstruct FECG signals with clear morphological information, this paper proposes a novel deep learning model, CBLS-CycleGAN. The model's generator combines spatial features extracted by the CNN with temporal features extracted by the BiLSTM network, thus ensuring that the reconstructed signals possess combined features with spatial and temporal dependencies. The model's discriminator utilizes PatchGAN, employing small segments of the signal as discriminative inputs to concentrate the training process on capturing signal details. Evaluating the model using two real FECG signal databases, namely "Abdominal and Direct Fetal ECG Database" and "Fetal Electrocardiograms, Direct and Abdominal with Reference Heartbeat Annotations", resulted in a mean MSE and MAE of 0.019 and 0.006, respectively. It detects the FQRS compound wave with a sensitivity, positive predictive value, and F1 of 99.51%, 99.57%, and 99.54%, respectively. This paper's model effectively preserves the morphological information of FECG signals, capturing not only the FQRS compound wave but also the fetal P-wave, T-wave, P-R interval, and ST segment information, providing clinicians with crucial diagnostic insights and a scientific foundation for developing rational treatment protocols. [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue titled "Machine Learning in Computer Vision and Image Sensing: Theory and Applications." The editorial highlights the diverse applications of machine learning (ML) models in various domains such as medical imaging, signal processing, remote sensing, and human activity detection. The special issue includes 11 papers that cover topics such as image segmentation, fluvial navigation, Alzheimer's disease classification, pneumothorax detection, lung cancer malignancy prediction, amniotic fluid volume detection, COVID-19 detection, and Parkinson's disease detection. The papers showcase the progress and potential of ML models in computer vision applications and provide valuable insights for future research. [Extracted from the article]

This paper investigates a method for precise mapping of human arm movements using sEMG signals. A multi-channel approach captures the sEMG signals, which, combined with the accurately calculated joint angles from an Inertial Measurement Unit, allows for action recognition and mapping through deep learning algorithms. Firstly, signal acquisition and processing were carried out, which involved acquiring data from various movements (hand gestures, single-degree-of-freedom joint movements, and continuous joint actions) and sensor placement. Then, interference signals were filtered out through filters, and the signals were preprocessed using normalization and moving averages to obtain sEMG signals with obvious features. Additionally, this paper constructs a hybrid network model, combining Convolutional Neural Networks and Artificial Neural Networks, and employs a multi-feature fusion algorithm to enhance the accuracy of gesture recognition. Furthermore, a nonlinear fitting between sEMG signals and joint angles was established based on a backpropagation neural network, incorporating momentum term and adaptive learning rate adjustments. Finally, based on the gesture recognition and joint angle prediction model, prosthetic arm control experiments were conducted, achieving highly accurate arm movement prediction and execution. This paper not only validates the potential application of sEMG signals in the precise control of robotic arms but also lays a solid foundation for the development of more intuitive and responsive prostheses and assistive devices. [ABSTRACT FROM AUTHOR]

Cracks provide the earliest and most immediate visual response to structural deterioration of asphalt pavements. Most of the current methods for crack detection are based on visible light sensors and convolutional neural networks. However, such an approach obviously limits the detection to daytime and good lighting conditions. Therefore, this paper proposes a crack detection technique cross-modal feature alignment of YOLOV5 based on visible and infrared images. The infrared spectrum characteristics of silicate concrete can be an important supplement. The adaptive illumination-aware weight generation module is introduced to compute illumination probability to guide the training of the fusion network. In order to alleviate the problem of weak alignment of the multi-scale feature map, the FA-BIFPN feature pyramid module is proposed. The parallel structure of a dual backbone network takes 40% less time to train than a single backbone network. As determined through validation on FLIR, LLVIP, and VEDAI bimodal datasets, the fused images have more stable performance compared to the visible images. In addition, the detector proposed in this paper surpasses the current advanced YOLOV5 unimodal detector and CFT cross-modal fusion module. In the publicly available bimodal road crack dataset, our method is able to detect cracks of 5 pixels with 98.3% accuracy under weak illumination. [ABSTRACT FROM AUTHOR]

This document is an editorial that summarizes several research papers on the topic of human recognition and the interactions between different channels of recognition, such as voice and face processing. The papers explore various aspects of this topic, including voice processing in challenging listening conditions, the role of familiarity in voice and face recognition, and the functional reorganization of neural systems in blind individuals. The papers highlight the importance of familiarity factors in recognition, the role of brain asymmetries, and the early integration of voice and face processing. The findings suggest that voice and face recognition are closely linked and influenced by familiarity, and that the right temporal lobe may play a significant role in vocal processing abilities in blind individuals. [Extracted from the article]

The analysis of sentiments and mining of opinions have become more and more important in years because of the development of social media technologies. The methods that utilize natural language processing and lexicon‐based sentiment analysis techniques to analyze people's opinions in texts require the proper extraction of sentiment words to ensure accuracy. The current issue is tackled with a novel perspective in this paper by introducing a hybrid sentiment analysis technique. This technique brings together Convolutional Neural Network (CNN) and Hidden Markov Models (HMMs), to accurately categorize text data and pinpoint feelings. The proposed method involves 1D convolutional‐layer CNN to extract hidden features from comments and applying HMMs on a feature‐sentence matrix, allowing for the utilization of word sequences in extracting opinions. The method effectively captures diverse text patterns by extracting a range of features from texts using CNN. Text patterns are learned using text HMM by calculating the probabilities between sequences of feature vectors and clustering feature vectors. The paper's experimental evaluation employs benchmark datasets such as CR, MR, Subj, and SST2, demonstrating that the proposed method surpasses existing sentiment analysis techniques and traditional HMMs. One of its strengths is to analyze a range of text patterns and identify crucial features that recognize the emotion of different pieces of a sentence. Additionally, the research findings highlight the improved performance of sentiment analysis tasks through the strategic use of zero padding in conjunction with the masking technique. [ABSTRACT FROM AUTHOR]

Currently, medical imaging has largely supplanted traditional methods in the realm of diagnosis and treatment planning. This shift is primarily attributable to the non-invasive nature, rapidity, and user-friendliness of medical-imaging techniques. The widespread adoption of medical imaging, however, has shifted the bottleneck to healthcare professionals who must analyze each case post-image acquisition. This process is characterized by its sluggishness and subjectivity, making it susceptible to errors. The anterior cruciate ligament (ACL), a frequently injured knee ligament, predominantly affects a youthful and sports-active demographic. ACL injuries often leave patients with substantial disabilities and alter knee mechanics. Since some of these cases necessitate surgery, it is crucial to accurately classify and detect ACL injury. This paper investigates the utilization of pre-trained convolutional neural networks featuring residual connections (ResNet) along with image-processing methods to identify ACL injury and differentiate between various tear levels. The ResNet employed in this study is not the standard ResNet but rather an adapted version capable of processing 3D volumes constructed from 2D image slices. Achieving a peak accuracy of 97.15% with a custom split, 96.32% through Monte-Carlo cross-validation, and 93.22% via five-fold cross-validation, our approach enhances the performance of three-class classifiers by over 7% in terms of raw accuracy. Moreover, we achieved an improvement of more than 1% across all types of evaluation. It is quite clear that the model's output can effectively serve as an initial diagnostic baseline for radiologists with minimal effort and nearly instantaneous results. This advancement underscores the paper's focus on harnessing deep learning for the nuanced detection and classification of ACL tears, demonstrating a significant leap toward automating and refining diagnostic accuracy in sports medicine and orthopedics. [ABSTRACT FROM AUTHOR]

Facility management maintains building service quality through cycles of condition assessments and rehabilitation. Building components, however, differ in their nature, service lives, deterioration patterns, and textual/visual inspection data. This complicates the condition assessment process and subsequent rehabilitation decisions. This paper proposes a smart condition assessment framework that uses different artificial intelligence (AI) techniques that suit the condition data analysis of different building components. The framework has been applied to a dataset of over 2000 maintenance requests for roof and heating, ventilation, and air conditioning (HVAC) systems across a 600-villa portfolio. To address their varying needs, convolutional neural networks were used on images of roof defects, while enhanced data mining was used on textual data of HVAC systems. Accordingly, work packages of deteriorated components were identified, and a 60-day schedule was developed to repair 203 HVAC units. This research shows how AI can assist facility management with respect to condition assessment, rehabilitation planning, and resource allocation. [ABSTRACT FROM AUTHOR]

In order to explore the application of neural networks in the intelligent protection of digital music copyrights, this paper initially investigates the key aspects of digital music-related supply chain management (SCM). Subsequently, this paper introduces a fuzzy, comprehensive evaluation-based method for authenticating digital music infringement. Furthermore, it employs a convolutional neural network to analyze digital music's source components. Within this context, an attention mechanism and an adaptive gate model are meticulously designed. Moreover, a selective adaptive cascade is implemented to optimize the structure of the multi-resolution coder–decoder. Through fuzzy authentication, it becomes feasible to accurately and reliably track and verify copyright information pertaining to digital music, thus providing an effective protective mechanism for the digital music industry. Experimental results reveal that in comparison with the SHN-4 series models, the network model embedded with the channel space (CS) attention module achieves improvements of up to 0.04 dB in terms of performance metrics for human voice and accompaniment sources. Furthermore, it outperforms these models by up to 0.19 dB in music source separation metrics. The incorporation of the adaptive attention mechanism profoundly enhances the model's performance in audio source separation tasks, benefiting both vocal and accompaniment sources. This improvement is evident in the form of a 0.44 SDR enhancement for vocal sources and a 0.18 SDR enhancement for accompaniment sources. Additionally, the proposed two-stage music separation-gate self-attention model surpasses the two-stage music separation-gate model in metrics associated with human voice and accompaniment sources. This outcome convincingly underscores the enhanced effectiveness achieved by integrating CS, self-attention, and adaptive connection in network performance, as well as the adaptive gate structure for music copyright protection. This approach heightens the model's autonomous selectivity, minimizes outliers, stabilizes waveform characteristics, and significantly contributes to the safeguarding of digital content. [ABSTRACT FROM AUTHOR]

Recent research has revealed that subtle imperceptible perturbations can deceive well-trained neural network models, leading to inaccurate outcomes. These instances, known as adversarial examples, pose significant threats to the secure application of machine learning techniques in safety-critical systems. In this paper, we delve into the study of one-pixel attacks in deep neural networks, recently reported as a kind of adversarial examples. To identify such one-pixel attacks, most existing methodologies rely on the differential evolution method, which utilizes random selection from the current population to escape local optima. However, the differential evolution technique might waste search time and overlook good solutions if the number of iterations is insufficient. Hence, in this paper, we propose a gradient ascent with momentum approach to efficiently discover good solutions for the one-pixel attack problem. As our method takes a more direct route to the goal compared to existing methods relying on blind random walks, it can effectively identify one-pixel attacks. Our experiments conducted on popular CNNs demonstrate that, in comparison with existing methodologies, our technique can detect one-pixel attacks significantly faster. [ABSTRACT FROM AUTHOR]

Simple Summary: To achieve targeted control of different wood-boring pests and targeted prevention of exotic invasions, it is necessary to classify the species of wood-boring pests. This paper collects feeding vibration signals of wood-boring pests using piezoelectric ceramic sensors and constructs a dataset. By applying attention mechanisms in both the time domain and the frequency domain, we design a novel CNN architecture named Residual Mixed Domain Attention Module Network (RMAMNet). RMAMNet significantly improves the accuracy of wood-boring pest classification, indicating its potential for effective pest monitoring and classification tasks. This study provides a new perspective and technical support for the automatic detection, classification, and early warning of wood-boring pests in forestry. Wood borers, such as the emerald ash borer and holcocerus insularis staudinger, pose a significant threat to forest ecosystems, causing damage to trees and impacting biodiversity. This paper proposes a neural network for detecting and classifying wood borers based on their feeding vibration signals. We utilize piezoelectric ceramic sensors to collect drilling vibration signals and introduce a novel convolutional neural network (CNN) architecture named Residual Mixed Domain Attention Module Network (RMAMNet).The RMAMNet employs both channel-domain attention and time-domain attention mechanisms to enhance the network's capability to learn meaningful features. The proposed system outperforms established networks, such as ResNet and VGG, achieving a recognition accuracy of 95.34% and an F1 score of 0.95. Our findings demonstrate that RMAMNet significantly improves the accuracy of wood borer classification, indicating its potential for effective pest monitoring and classification tasks. This study provides a new perspective and technical support for the automatic detection, classification, and early warning of wood-boring pests in forestry. [ABSTRACT FROM AUTHOR]

In recent years, with the rapid development of deep learning technology, a large number of excellent convolutional neural networks (CNNs) have been proposed, many of which are based on improvements to classical methods. Based on the Inception family of methods, depthwise separable convolution was applied to Xception to achieve lightweighting, and Inception-ResNet introduces residual connections to accelerate model convergence. However, existing improvements for the Inception module often neglect further enhancement of its receptive field, while increasing the receptive field of CNNs has been widely studied and proven to be effective in improving classification performance. Motivated by this fact, three effective expansion modules are proposed in this paper. The first expansion module, Inception expand (Inception-e) module, is proposed to improve the classification accuracy by concatenating more and deeper convolutional branches. To reduce the number of parameters for Inception e, this paper proposes a second expansion module—Equivalent Inception-e (Eception) module, which is equivalent to Inception-e in terms of feature extraction capability, but which suppresses the growth of the parameter quantity brought by the expansion by effectively reducing the redundant convolutional layers; on the basis of Eception, this paper proposes a third expansion module—Lightweight Eception (Lception) module, which crosses depthwise convolution with ordinary convolution to further effectively reduce the number of parameters. The three proposed modules have been validated on the Cifar10 dataset. The experimental results show that all these extensions are effective in improving the classification accuracy of the models, and the most significant effect is the Lception module, where Lception (rank = 4) on the Cifar10 dataset improves the accuracy by 1.5% compared to the baseline model (Inception module A) by using only 0.15 M more parameters. [ABSTRACT FROM AUTHOR]

Since plant diseases occurring during the growth process are a significant factor leading to the decline in both yield and quality, the classification and detection of plant leaf diseases, followed by timely prevention and control measures, are crucial for safeguarding plant productivity and quality. As the traditional convolutional neural network structure cannot effectively recognize similar plant leaf diseases, in order to more accurately identify the diseases on plant leaves, this paper proposes an effective plant disease image recognition method aECA-ResNet34. This method is based on ResNet34, and in the first and the last layers of this network, respectively, we add this paper's improved aECAnet with the symmetric structure. aECA-ResNet34 is compared with different plant disease classification models on the peanut dataset constructed in this paper and the open-source PlantVillage dataset. The experimental results show that the aECA-ResNet34 model proposed in this paper has higher accuracy, better performance, and better robustness. The results show that the aECA-ResNet34 model proposed in this paper is able to recognize diseases of multiple plant leaves very accurately. [ABSTRACT FROM AUTHOR]

The escalating worldwide power demand necessitates innovative solutions to address the emerging power crisis. Grid-synchronized electric vehicles (EVs) have emerged as a promising avenue for mitigating this crisis. The vehicle-to-grid technology is unique advanced smart grid concept by which the exchange of energy is allowed among grid and EV. The integration of EV and grid affects an entire power system causing imbalance in supply–demand, voltage and frequency. To minimize these issues, feasible optimization techniques are introduced in this paper. Lithium-ion batteries are initially charged via smart homes, and convolutional neural networks (CNN) are used to ascertain a battery's state of charge (SOC). A bidirectional SEPIC–zeta converter is employed in this paper by which voltage is either increased or decreased. The gating sequence for the converter is generated by means of adaptive neuro fuzzy inference system which depends on an estimated SOC. If the SOC is greater than 80%, battery is discharged using a SEPIC mode; if the SOC is lower than 80%, battery is charged by grid using the ZETA mode. By using a PI controller, active and reactive power are also controlled. Simulation results using MATLAB showcase the efficacy of the suggested approach. The bidirectional SEPIC–Zeta converter exhibits an impressive efficiency of 96% and a voltage gain ratio of 1:8 when compared to other converters. CNN-based SOC tracking achieves remarkable tracking efficiency of 92.3%, outperforming other tracking methods. The grid current total harmonic distortion is notably curtailed at 2.3%, and a power factor of 0.9 is achieved using PI-based grid synchronization. [ABSTRACT FROM AUTHOR]

Diseases of tomato leaves can seriously damage crop yield and financial rewards. The timely and accurate detection of tomato diseases is a major challenge in agriculture. Hence, the early and accurate diagnosis of tomato diseases is crucial. The emergence of deep learning has dramatically helped in plant disease detection. However, the accuracy of deep learning models largely depends on the quantity and quality of training data. To solve the inter-class imbalance problem and improve the generalization ability of the classification model, this paper proposes a cycle-consistent generative-adversarial-network-based Transformer model to generate diseased tomato leaf images for data augmentation. In addition, this paper uses a Transformer model and densely connected CNN architecture to extract multilevel local features. The Transformer module is utilized to capture global dependencies and contextual information accurately to expand the sensory field of the model. Experiments show that the proposed model achieved 99.45% accuracy on the PlantVillage dataset. The 2018 Artificial Intelligence Challenger dataset and the private dataset attained accuracies of 98.30% and 95.4%, and the proposed classification model achieved a higher accuracy and smaller model size compared to previous deep learning models. The classification model is generalizable and robust and can provide a stable theoretical framework for crop disease prevention and control. [ABSTRACT FROM AUTHOR]

This paper designs a new facial Expression recognition network called a multi‐scale feature Fusion Convolutional neural Network (EFCN). This network is proposed to solve two problems in the facial expression recognition task. First, there are many commonalities between faces of different expression categories, and the recognition task cannot be precisely performed when the commonality is greater than the individuality. Secondly, facial detail features have a significant impact on the final results of expression recognition, while the image detail features extracted by traditional convolutional neural networks are not sufficient. In order to address the above issues, the feature enhancement network (FEN) and the detail information enhancement module (DEM) are designed. The FEN fuses deep and shallow features. Accordingly, the feature map contains richer information, making it easy to identify the samples. The DEM extracts and fuses the features passed by the backbone network with multi‐scale features to enhance the network's ability to extract features from small regions of the face. We validated the proposed method on three datasets, RAF‐DB, CK+, and JAFFE, and achieved 84.50%, 97.86%, and 91.05% accuracy, respectively, and the experimental results showed the effectiveness of the proposed method in this paper. For example, on the JAFFE dataset, the recognition accuracy of this method surpasses the MLT method by 1.87%. [ABSTRACT FROM AUTHOR]

Single image super‐resolution (SISR) has gained significant attention in image processing and computer vision, driven by deep learning‐based models like convolutional neural networks (CNN). Yet, the resource‐intensive nature of these models poses challenges when deploying them on edge devices. To address this issue, resource‐constrained models need to be developed. While recent models like the information distillation network (IDN), the information multi‐distillation network (IMDN), the residual feature distillation network (RFDN), and so on, have attempted to reduce parameters and computational complexity, further optimization remains vital. Therefore, this paper presents an approach to enhancing the efficiency and lightweight nature of the SISR. We introduce a novel lightweight SR model by building upon the RFDN architecture, the winner of the AIM2020 and NTIRE2022 SR challenges. The proposed depthwise channel attention network (DWCAN) model makes some key changes to RFDN. First, it replaces the main residual feature distillation block (RFDB) with a depthwise channel attention block (DWCAB). Additionally, DWCAN includes a shallow residual block (SRB) with depthwise separable convolution (DW) and a channel attention (CA) block. The primary goal of our work is to significantly reduce model parameters, computational operations, inference time, and memory size while maintaining or improving a peak signal‐to‐noise ratio (PSNR) of 29 dB. The experimental results demonstrate the effectiveness of the proposed model. By applying our modifications, we achieve a notable reduction in model complexity, leading to an improved PSNR of 29.07 dB, up from RFDN's 29.04 dB on a diverse 2 K resolution (DIV2K) dataset. This underscores the potential of our lightweight model to balance computational efficiency and SR quality. Additionally, the proposed work is essential for the metaverse for two key reasons: (1) Enhancing visual quality by adding complex details to textures and objects, making the digital world feel more like reality. (2) Ensuring device compatibility across a range of gadgets, from smartphones to VR headsets, optimizing the metaverse experience for all users. In short, a lightweight single image super‐resolution model for image reconstruction is proposed in this paper. [ABSTRACT FROM AUTHOR]