Search

In this study, carbon nanotube papers were employed in fabricating thin and broadband radar absorbing structures (RAS). Different concentrations of the CNT papers have been made by using a vacuum filtration method, with 20 × 20 cm in size and 21‐27 μm in thickness. An epoxy resin was added into the CNT paper and then cured to become a composite with 1‐5 wt.% of CNTs and 83‐309 μm in thickness. The complex permittivity and permeability (ε′, ε″, μ′, μ″) of the CNT paper composites were measured using the transmission/reflection method in the frequency range of 2‐18 GHz. The results reveal that the real (ε′) and imaginary (ε″) parts of the complex permittivity are increased with the CNT concentration. The ε′ of 5 wt.% CNT sample reaches 323 at 2 GHz and then decreases to 49.0 at 18 GHz. The ε″ reaches 321 at 2 GHz and decreases to 26.0 at 18 GHz. The CNT paper composite combined with a glass fabric composite used for a dielectric spacer is fabricated for an innovative RAS and the reflection loss is measured using the arch method in a microwave anechoic chamber. The results show that the 5 wt.% CNT paper composite/glass fabric composite absorbers attain maximum reflection loss of −13.3 dB at 12.0 GHz, −13.8 dB  at 10.0 GHz, and −16.0 dB at 7.5 GHz for spacer thickness of 1.5, 2.0, and 3.0 mm, respectively. [ABSTRACT FROM AUTHOR]

In order to solve the problems of oil‐paper insulation deterioration of oil‐immersed power transformers, including the instability of performance degradation quantity at the early stage, non‐linear deterioration process and uncertainty of life prediction, an improved Wiener stochastic process based on strong tracking filter (STF) is proposed to predict the remaining life of transformer oil‐paper insulation in this paper. Firstly, in order to grasp the dynamic process from healthy state to current deterioration state, a deterioration model is established based on Wiener random process. Secondly, in order to improve the accuracy, the initial values of model parameters are estimated based on expectation maximization (EM) algorithm, then with the increase of monitoring data, model parameters are updated by using STF algorithm, and the probability density function of remaining life is derived to predict the remaining life of oil‐paper insulation. Finally, the accuracy of the proposed method is verified by using furfural content as performance degradation index and accelerated thermal aging experimental data. Compared with the Bayesian–Wiener algorithm, the MSE of the proposed algorithm is reduced to 0.2138 and its MAPE is reduced more than 4%. Besides, the proposed method has the advantages of strong robustness and low uncertainty of residual life prediction. [ABSTRACT FROM AUTHOR]

This study is for the case where the available data of power transformer oil–paper insulation is limited to a small amount furfural data, to solve the problems in oil–paper insulation degradation modelling, such as few samples available, unknown function form of the degradation process, differences of individual transformers among degradation processes, and commonality of degradation trends. A power transformer oil–paper insulation degradation modelling and prediction method based on functional principal component analysis (FPCA) is proposed. First, discrete furfural data of oil–paper insulation degradation are converted into continuous functional data, and the common degradation information of transformers is extracted based on functional time warping technology. Second, the principal components of insulation degradation are extracted based on FPCA method, and the difference of degradation information of individual transformers is obtained by analysing the differential of principal component scores. Subsequently, power transformer oil–paper insulation degradation model is constructed, and finally, the degradation model is updated based on Bayesian theory and the oil–paper insulation degradation is predicted. The example results show that compared with traditional transformer oil–paper insulation degradation modelling method, the proposed method has obvious superiority in model accuracy. [ABSTRACT FROM AUTHOR]

In order to cope with the current engineering demand for increasing the current‐carrying capacity of resin impregnated paper (RIP) bushing, an optimization scheme of RIP bushing was proposed in this paper. Simulation and experimental studies were carried out to verify the rationality of the scheme. An improved simulation method was proposed. To ensure as much accuracy as possible, the physical model of simulation considers the influence of heat conduction, thermal convection and thermal radiation process according to the actual operation environment. To boost the computational efficiency, the improved method simplified the relationship between temperature and heating power of the current‐carrying conductor as a fitting formula to avoid the iterative calculation between electromagnetic field simulation and temperature field simulation. The temperature rise test was carried out according to the engineering requirement and the standard international electro technical commission (IEC) 60137:2008. The simulation and experimental results show that the RIP bushing can carry a current with the heating power of its conductor equivalent to that generated by a 50‐Hz current of 6736 A while running in a converter station. It is a breakthrough of the current‐carrying capacity of high voltage bushing. Meanwhile, the regularity of temperature distribution of the RIP bushing was discussed. [ABSTRACT FROM AUTHOR]

Lime mud, a kind of industrial waste that produced in paper mill, was proposed as CO2 sorbent in calcium looping process. The carbonation performance of the lime mud was investigated in a dual‐fixed bed reactor (DFR) and a thermogravimetric analyzer (TGA). The carbonation kinetics of the lime mud in the chemical reaction controlled stage was analyzed by a surface reaction‐controlled kinetic model. The results show that the lime mud presents much poorer carbonation performance during the chemical reaction controlled stage compared with the limestone, mainly due to the high content of chlorine in the lime mud. A prewash treatment process was used to decrease the chlorine content to mitigate the sintering of the lime mud when calcined at high temperature. After prewash treatment, the prewashed lime mud shows much higher CO2 capture capacity during the chemical reaction controlled stage compared with the lime mud. A prolonged carbonation process successfully further enhances the microstructure and improves the carbonation performance of the prewashed lime mud in the chemical reaction controlled stage. The lime mud can be effectively used as CO2 sorbent in calcium looping process after prewash treatment and the following prolonged carbonation treatment. [ABSTRACT FROM AUTHOR]

Background and Purpose: Multiple sclerosis (MS) is an unpredictable disease characterised by a highly variable disease onset and clinical course. Three main clinical phenotypes have been described. However, distinguishing between the two progressive forms of MS can be challenging for clinicians. This article examines how the diagnostic definitions of progressive MS impact clinical research, the design of clinical trials and, ultimately, treatment decisions. Methods: We carried out an extensive review of the literature highlighting differences in the definition of progressive forms of MS, and the importance of assessing the extent of the ongoing inflammatory component in MS when making treatment decisions. Results: Inconsistent results in phase III clinical studies of treatments for progressive MS, may be attributable to differences in patient characteristics (e.g., age, clinical and radiological activity at baseline) and endpoint definitions. In both primary and secondary progressive MS, patients who are younger and have more active disease will derive the greatest benefit from the available treatments. Conclusions: We recommend making treatment decisions based on the individual patient's pattern of disease progression, as well as functional, clinical and imaging parameters, rather than on their clinical phenotype. Because the definition of progressive MS differs across clinical studies, careful selection of eligibility criteria and study endpoints is needed for future studies in patients with progressive MS. [ABSTRACT FROM AUTHOR]

The safety and efficacy of pharmacotherapy in children, particularly preterms, neonates and infants, is limited by a paucity of good‐quality data from prospective clinical drug trials. A specific challenge is the establishment of valid biomarkers. OMICs technologies may support these efforts by complementary information about targeted and nontargeted molecules through systematic characterization and quantitation of biological samples. OMICs technologies comprise at least genomics, epigenomics, transcriptomics, proteomics, metabolomics and microbiomics in addition to the patient's phenotype. OMICs technologies are in part hypothesis‐generating, allowing an in depth understanding of disease pathophysiology and pharmacological mechanisms. Application of OMICs technologies in paediatrics faces major challenges before routine adoption. First, developmental processes need to be considered, including a subdivision into specific age groups as developmental changes clearly impact OMICs data. Second, compared to the adult population, the number of patients is limited as are the type and amount of necessary biomaterial, especially in neonates and preterms. Thus, advanced trial designs and biostatistical methods, noninvasive biomarkers, innovative biobanking concepts including data and samples from healthy children, as well as analytical approaches (eg liquid biopsies) should be addressed to overcome these obstacles. The ultimate goal is to link OMICs technologies with innovative analysis tools, such as artificial intelligence at an early stage. The use of OMICs data based on a feasible approach will contribute to the identification complex phenotypes and subpopulations of patients to improve the development of medicines for children with potential economic advantages. [ABSTRACT FROM AUTHOR]

Background and purpose: Health risks associated with SARS‐CoV‐2 infection are undisputed. Moreover, the capability of vaccination to prevent symptomatic, severe, and fatal COVID‐19 is recognized. There is also early evidence that vaccination can reduce the chance for long COVID‐19. Nonetheless, the willingness to get vaccinated and receive booster shots remains subpar among people with neurologic disorders. Vaccine scepticism not only jeopardizes collective efforts to end the COVID‐19 pandemic but puts individual lives at risk, as some chronic neurologic diseases are associated with a higher risk for an unfavorable COVID‐19 course. Methods: In this position paper, the NeuroCOVID‐19 Task Force of the European Academy of Neurology (EAN) summarizes the current knowledge on the prognosis of COVID‐19 among patients with neurologic disease, elucidates potential barriers to vaccination coverage, and formulates strategies to overcome vaccination hesitancy. A survey among the Task Force members on the phenomenon of vaccination hesitancy among people with neurologic disease supports the lines of argumentation. Results: The study revealed that people with multiple sclerosis and other nervous system autoimmune disorders are most skeptical of SARS‐CoV‐2 vaccination. The prevailing concerns included the chance of worsening the pre‐existing neurological condition, vaccination‐related adverse events, and drug interaction. Conclusions: The EAN NeuroCOVID‐19 Task Force reinforces the key role of neurologists as advocates of COVID‐19 vaccination. Neurologists need to argue in the interest of their patients about the overwhelming individual and global benefits of COVID‐19 vaccination. Moreover, they need to keep on eye on this vulnerable patient group, its concerns, and the emergence of potential safety signals. [ABSTRACT FROM AUTHOR]

The main insulation structure of the valve‐side winding of converter transformer bears the effect of AC and DC superimposed voltage during operation. The electric field intensity in the pressboard is much higher than that in the pressboard in the AC transformer. This condition increases the probability of failure of insulation structure. Therefore, the design and optimization of the main insulation structure of the valve‐side winding are keys to ensure the stable operation of converter transformer. This study establishes a model of the main insulation structure of the valve‐side winding of the ±1100 kV converter transformer. The influence of the insulating oil–paper configuration on the electric field distribution of the main insulation structure of the valve‐side winding is analysed, and then, an optimization idea is proposed. The oil–paper configuration includes two aspects: oil–paper insulation structural design and combination selection, that is, the influence of typical oil–paper structural design parameters and the aging state of different oil–paper combinations on the electric field distribution. Finally, the optimization idea of the oil–paper configuration for valve‐side winding of converter transformer is obtained, and the established model is optimized. [ABSTRACT FROM AUTHOR]

Paper electronics offer an environmentally sustainable option for flexible and wearable systems and perfectly fit the available printing technologies for high manufacturing efficiency. As the heart of energy‐consuming devices, paper‐based batteries are required to be compatible with printing processes with high fidelity. Herein, hydrogel reinforced cellulose paper (HCP) is designed to serve as the separator and solid electrolyte for paper batteries. The HCP can sustain higher strain than pristine papers and are biodegradable in natural environment within four weeks. Zinc‐metal (Ni and Mn) batteries printed on the HCP present remarkable volumetric energy density of ≈26 mWh cm–3, and also demonstrate the feature of cuttability and compatibility with flexible circuits and devices. As a result, self‐powered electronic system could be constructed by integrating printed paper batteries with solar cells and light‐emitting diodes. The result highlights the feasibility of hydrogel reinforced paper for ubiquitous flexible and eco‐friendly electronics. [ABSTRACT FROM AUTHOR]

Biodegradable paper cups coated with rice bran wax and whey protein isolate were designed to package popcorn. Coatings with different concentrations of whey protein isolate (5.5, 7.75, and 10% w/v) and rice bran wax (0.2, 0.4, and 0.6% w/v) were applied on the outer surface of the paper cups. Thickness, color changes, Young's modulus and tensile strength, water vapor transmission rate (WVTR) of the coated and uncoated cups, and also popcorns properties (pH, texture, and sensory properties) were evaluated. Water vapor transmission rate, Young's modulus, thickness, total color change index, and tensile strength of coated cups with the optimal coating formulation was 19.785 (g/m2 day), 11.810 (MPa), 276.583 (µm), 1.839, and 11.222 (MPa), respectively. The results showed that paper cup coating increased thickness and yellowness and reduced the brightness, Young's modulus, and WVTR. Coating had a positive effect on the pH and texture of popcorns packaged in coated cups than samples packed in uncoated cups (p <.05). With increasing storage time due to moisture absorption, popcorn changes from crisp to viscoelastic and increases tissue firmness (p <.05). Popcorns' taste in uncoated cups had gained significantly lower scores by panelists compared with the samples packed in coated cups. There was a significant decrease in the general acceptance of popcorn during storage and also the type of coating used in the packaging cup (p <.05). Storage time and type of coating showed no significant effect on the moisture content, odor, and appearance of popcorn. In sensory evaluation, the coated packaging increased the taste, no difference in odor and appearance, and increased the overall acceptance of popcorn compared to the sample in uncoated cups. In general, the results showed that paper cup coating could be a new approach for barrier property improvement in paper‐based food packaging and extending the shelf life of the products. [ABSTRACT FROM AUTHOR]

Carbonaceous materials, especially with graphite‐layers structure, as anode for potassium‐ion batteries (PIBs), are the footstone for industrialization of PIBs. However, carbonaceous materials with graphite‐layers structure usually suffer from poor cycle life and inferior stability, not to mention freestanding and flexible PIBs. Here, a freestanding and flexible 3D hybrid architecture by introducing carbon dots on the reduced graphene oxide surface (CDs@rGO) is synthesized as high performance PIBs anode. The CDs@rGO paper has efficient electron and ion transfer channels due to its unique structure, thus enhancing reaction kinetics. In addition, the CDs provide abundant defects and oxygen‐containing functional groups, which can improve the electrochemical performance. This freestanding and flexible anode exhibits the high capacity of 310 mAh g−1 at 100 mA g−1, ultra‐long cycle life (840 cycles with a capacity of 244 mAh g−1 at 200 mA g−1), and excellent rate performance (undergo six consecutive currents changing from 100 to 500 mA g−1, high capacity 185 mAh g−1 at 500 mA g−1), outperforming many existing carbonaceous PIB anodes. The results may provide a starting point for high‐performance freestanding and flexible PIBs and promote the rapid development of next‐generation flexible batteries. [ABSTRACT FROM AUTHOR]

The introduction of solid dielectrics to electrode surfaces will change the motion behaviours of free metallic particles and in turn affect partial discharge (PD) characteristics in transformer oil. To estimate the influence, the metallic particles movement in flowing oil was compared between different cases with and without insulating paper covering electrodes here. When the electrodes were bare, particles executed up‐down movements repeatedly in the vertical direction. As the electrodes were paper‐covered, the particles would settle on the paper surface for a period of time. Simultaneously, the PD characteristics caused by metallic particles were measured. When the electrodes were bare, the discharges concentrated in 0–90° and 300–360° and the PD magnitude reached 390 pC. When the double electrodes were paper‐covered, the PD magnitude decreased by 67% and the concentration phases of PDs would migrate to 45° and 160°. In order to analyse the experimental results, a simulation model with a paper‐covered boundary was constructed. Simulated trajectories of particles were in accord with the experiment results. Base on the model, the particle motion characteristics were obtained and the electric field distribution between the particle and electrode was calculated. Finally, the influence of paper‐covering on PD characteristics was discussed. [ABSTRACT FROM AUTHOR]

Cellulose‐based paper samples were surface‐modified by a polymeric single‐source precursor prepared from perhydropolysilazane (PHPS) and iron(III)acetylacetonate (Fe(acac)3) and ammonolyzed at 500°C, 700°C, 900°C, and 1000°C, leading to C/SiFe(N,C)O‐based ceramic papers with in situ‐generated hierarchical micro/nano‐morphology. As reference, cellulose‐free samples were prepared under the same conditions. Upon thermal treatment, the microstructure evolutions of the resulting ceramic paper and the reference sample were comparatively investigated. Scanning electron microscopy (SEM) showed that for all temperatures, the ceramic papers exhibit the same morphology as the template, however, with noticeable shrinkage and curling, particularly evident at higher temperatures. X‐ray diffraction (XRD) measurements of the reference samples and the ceramic papers showed a similar crystallization behavior and phase evolution in both materials. In the ceramic paper, the crystallization process seems to occur at a later time. The results provide a comprehensive understanding of the investigated C/SiFe(N,C)O‐based ceramic system. It was shown that use of the cellulose‐based paper template has the benefit of retaining the microstructure and furthermore, apart from transforming the cellulose fibers into turbostratic carbon, does not change the phase evolution during the polymer‐to‐ceramic transformation, allowing at the same time the manufacturing of novel morphologically complex parts by a convenient one‐pot synthesis approach. [ABSTRACT FROM AUTHOR]

Paper-based flexible pressure sensors have received extensive attention owing to their recoverability and accessibility. This study, proposes a graphical pressure sensor array with a multilayered structure. A simple writing method is adopted to realize the adsorption of sensitive materials on the fiber structure of cellulose paper. Pressure sensors with 1, 3, 5, and 7 stacked layers are fabricated and compared. The results show that the seven-layer sensor achieves a high sensitivity (44 kPa-1) and fast time response (less than 150 ms). The highly sensitive stacked paper-based sensor array realizes the pressure detection in objects and special-shaped surfaces. A pressure sensor based on a commercial corrugated box is also fabricated for comparison. The corrugated carton array is used to switch the reminder devices for convenience and accessibility. Because many scenarios require a safe distance to be maintained, particularly under the influence of COVID-19, the writable paper-based sensor array is used to realize graphical distance perception and provide warnings. [ABSTRACT FROM AUTHOR]

Combining recycling of paper wastes (WPs) with extrusion‐based additive manufacturing represents a sustainable route to cellular cellulose composites tailored for lightweight construction. Particularly, shear mixing of shredded WPs with an aqueous solution of a polymer binder like polyvinyl alcohol (PVA) yields aqueous pastes suitable for 3D printing. As a shear thinning additive, both WP and microfibrillated cellulose account for enhanced shear thinning and dimensional stability. Opposite to the formation of dense WP/PVA composites by melt extrusion, 3D printing of aqueous pastes produces cellular cellulose/PVA composites exhibiting hierarchical pore architectures. In spite of low densities around 0.8 g cm−3, high Young's modulus (2.0 GPa) and tensile strength (53 MPa) are achieved. Mechanical stability, water resistance, and even flame retardancy simultaneously improve by crosslinking with glyoxal and especially by mineralization. Multimaterial 3D printing combines the 3D dispensing of cellulose/PVA pastes with the simultaneous, staged, or subsequent spraying of aqueous water glass to enable mineralization of composite surface, bulk, and interlayers. Furthermore, the glyoxal‐mediated crosslinking affords thermo‐ and moisture‐responsive cellulose/PVA composites with programmable shape change induced either by heating at 100 °C or by exposure to moisture at 37 °C. [ABSTRACT FROM AUTHOR]

In recent years, it has been proposed that unrealistic requirements for academics and medical doctors to publish in scientific journals, combined with monetary publication rewards, have led to forms of contract cheating offered by organizations known as paper mills. Paper mills are alleged to offer products ranging from research data through to ghostwritten fraudulent or fabricated manuscripts and submission services. While paper mill operations remain poorly understood, it seems likely that paper mills need to balance product quantity and quality, such that they produce or contribute to large numbers of manuscripts that will be accepted for publication. Producing manuscripts at scale may be facilitated by the use of manuscript templates, which could give rise to shared features such as textual and organizational similarities, the description of highly generic study hypotheses and experimental approaches, digital images that show evidence of manipulation and/or reuse, and/or errors affecting verifiable experimental reagents. Based on these features, we propose practical steps that editors, journal staff, and peer reviewers can take to recognize and respond to research manuscripts and publications that may have been produced with undeclared assistance from paper mills. [ABSTRACT FROM AUTHOR]

The stable operation of transformers is an important guarantee of power system security. The temperature distribution of main insulation is different in long‐term operation. The temperature difference between the local hottest spot temperature and the average oil temperature in the transformer exceeds 30 K. Therefore, the oil‐paper insulation inside the transformer will exhibit non‐uniform ageing after long‐term operation. At present, frequency domain dielectric response (FDS) technology is widely used in transformer ageing assessment. However, the existing assessment methods are only used for overall insulation ageing assessment. The average moisture content and polymerization degree of the overall insulation between each phase winding are obtained. But it still cannot be used to assess the non‐uniform ageing of the transformer's main insulation. The radial, axial, and two directions non‐uniform ageing models have been made in the laboratory in this study. The FDS and physicochemical properties of non‐uniform ageing models were tested. The variation law of FDS for non‐uniform ageing models was analysed. Meanwhile, the dielectric relaxation model of non‐uniform ageing for main insulation was established. The method of frequency division iterative calculation was proposed. Combined with the Fessler moisture balance formula of ageing oil‐paper insulation, the quantitative assessment method for ageing parameters of the non‐uniform ageing model can be realized. Compared the calculated results with the chemical analysis results, the relative error of the polymerization degree calculation is less than 4%, and the error of the moisture content calculation is less than 0.3%. The calculation results can meet the needs of the engineering apply. Therefore, this method can realize the quantitative assessment of transformer main insulation ageing, which is of great significance to assess the transformer insulation state. [ABSTRACT FROM AUTHOR]

Background and purpose: This position paper makes recommendations following an audit of care provided to people presenting with a seizure to emergency departments (EDs) in Europe. Methods: Participating countries were asked to include five hospitals agreeing to identify 50 consecutive seizure patients presenting to their ED between 1 August 2016 and 31 August 2017. Anonymous data were collected to a web database. Where quoted, percentages are mean site values and ranges are the 10th–90th centile. Results: Data were collected on 2204 ED visits (47 sites, up to six per country, across 15 countries): 1270 (58%) known epilepsy, 299 (14%) previous blackouts but no epilepsy diagnosis, 634 (29%) with a first seizure. Wide variability was identified for most variables. Of those with known epilepsy, 41.2% (range 26.2%–59.6%) attended the ED in the previous 12 months, but only 64.7% (range 37.2%–79.8%) had seen an epilepsy specialist in the previous 12 months. 67.7% (range 34.0%–100%) were admitted, 53.1% to a neurology ward (range 0.0%–88.9%). Only 37.5% first seizure patients (range 0.0%–71.4%) were given advice about driving. Conclusions and recommendations: It is recommended that in Europe guidance is agreed on the management and onward referral of those presenting to the ED with a seizure; a referral process is created that can be easily implemented; it is ensured that the seizure services receive referrals and see the patients within a short time period; and a simple system is developed and implemented to allow continuous monitoring of key indices of epilepsy care. [ABSTRACT FROM AUTHOR]

The 2017 International League Against Epilepsy classification has defined a three‐tier system with epilepsy syndrome identification at the third level. Although a syndrome cannot be determined in all children with epilepsy, identification of a specific syndrome provides guidance on management and prognosis. In this paper, we describe the childhood onset epilepsy syndromes, most of which have both mandatory seizure type(s) and interictal electroencephalographic (EEG) features. Based on the 2017 Classification of Seizures and Epilepsies, some syndrome names have been updated using terms directly describing the seizure semiology. Epilepsy syndromes beginning in childhood have been divided into three categories: (1) self‐limited focal epilepsies, comprising four syndromes: self‐limited epilepsy with centrotemporal spikes, self‐limited epilepsy with autonomic seizures, childhood occipital visual epilepsy, and photosensitive occipital lobe epilepsy; (2) generalized epilepsies, comprising three syndromes: childhood absence epilepsy, epilepsy with myoclonic absence, and epilepsy with eyelid myoclonia; and (3) developmental and/or epileptic encephalopathies, comprising five syndromes: epilepsy with myoclonic–atonic seizures, Lennox–Gastaut syndrome, developmental and/or epileptic encephalopathy with spike‐and‐wave activation in sleep, hemiconvulsion–hemiplegia–epilepsy syndrome, and febrile infection‐related epilepsy syndrome. We define each, highlighting the mandatory seizure(s), EEG features, phenotypic variations, and findings from key investigations. [ABSTRACT FROM AUTHOR]

Bibliometric quantification is frequently used as metrics for the evaluation of the scientific performance of researchers and institutions. The researchers' merit is usually assessed by the analysis of quantitative parameters such as the number of publications, the impact factor of journals, the total number of citations, or the h‐index, although the limitations in translating these indicators into the impact of the outcome of scientific production are a matter of harsh criticism. To assess, based on factual evidences, the validity of traditional bibliometric analyses to conclude on the impact of papers to advance the state of the art, we carried out an innovative methodology on selected publications (test set). This methodology is based on identifying those citations of the test set papers that truly embed the methods, concepts, or hypotheses to build new knowledge and formulate conclusions. The results show that the percentage of citations that reflect the real impact of the papers of the test set has an average value of 12.4% of total citations and is not related to the impact factor of the journal where the test set papers were published. In conclusion, our analysis demonstrates factually, using experimental data, the total failure of using quantitative bulk citation analyses to conclude on the scientific impact of publications. Only a careful analysis of how the work described in papers was embedded on the subsequent work and/or conclusions of others can tell about the real contribution of a published work to the development of new knowledge and advancement of science. [ABSTRACT FROM AUTHOR]

Objective: The Patient Information Leaflet (PIL) is an authoritative document that all people with epilepsy in the EU receive when prescribed antiseizure medication (ASM). We undertook the first independent, comprehensive assessment to determine how understandable they are. Regulators state that when patients are asked comprehension questions about them, ≥80% should answer correctly. Also, recommended is that PILs have a maximum reading requirement of US grade 8. Methods: Study 1: We obtained 140 current ASM PILs written in English. "Readability" was assessed using four tests, with and without adjustment for influence of familiar, polysyllabic words. A total of 179 online materials on epilepsy were also assessed. Study 2: Two PILs from Study 1 were randomly selected (Pregabalin Focus; Inovelon) and shown to 35 people from the UK epilepsy population. Their comprehension was assessed. Study 3: To understand whether the student population provides an accessible alternative population for future examination of ASM PILs, Study 3 was completed, using the same methods as Study 2, except that participants were 262 UK university students. Results: Study 1: No PIL had a reading level of grade 8. Median was grade 11. Adjusting for context, the PILs were still at grade 10.5. PILs for branded ASMs were most readable. PILs were no more readable than (unregulated) online materials. Study 2: Users struggled to comprehend the PILs' key messages. The eight questions asked about pregabalin were typically answered correctly by 54%. For Inovelon, it was 62%. Study 3: Most student participants comprehended the PILs' key messages. The questions about Inovelon were answered correctly by 90%; for pregabalin it was 86%. Significance: This is the first independent and comprehensive examination of ASM PILs. It found that PILs being used fail to meet recommendations and regulatory requirements and risk not being understandable to a substantial proportion of users. In finding that people from the epilepsy population differ markedly in comprehension of PILs compared to students, this study highlights the importance of completing user testing with the target population. [ABSTRACT FROM AUTHOR]

Older people are often affected by impaired organ and bodily functions resulting in multimorbidity and polypharmacy, turning them into the main user group of many medicines. Very often, medicines have not specifically been developed for older people, causing practical medication problems for them like limited availability of easy to swallow formulations, easy to open packaging and dosing instructions for enteral administration. In 2020, the European Medicines Agency (EMA) published a reflection paper 'Pharmaceutical development of medicines for use in the older population', which discusses how the emerging needs of an ageing European population can be addressed by medicines regulation. The paper intends to help industry to better consider the needs of older people during pharmaceutical/clinical medicines development by summarising data on the most relevant topics, providing early suggestions on how to move forward and prompting expert discussions and studies into knowledge gaps. Topics include patient acceptability, (dis)advantages of an administration route, formulation, dosage form, packaging, dosing device and user instruction. While the paper is directed at older people and the pharmaceutical industry, the reflections are also relevant to younger patients with similar disease‐related needs and of value to other stakeholders parties, e.g., healthcare professionals, academics, patients and caregivers, as the paper makes clear what can be expected from industry and where collaborative work is needed. This commentary provides an overview of the different steps in the development of the reflection paper, discusses points considered most controversial and/or subject to (multidisciplinary) expert discussions and indicates their value for real world clinical practice. [ABSTRACT FROM AUTHOR]

SiFeO(N,C)‐based ceramic papers were prepared via a one‐pot synthesis approach by dip‐coating a cellulose‐based paper template with a polymeric perhydropolysilazane precursor modified with iron(III)acetylacetonate. The preceramic composites were subsequently pyrolyzed in ammonia atmosphere at 500, 700, and 1000°C, respectively, and the characteristics of the three resulting ceramic papers were comparatively investigated. Scanning electron microscopy revealed that in each sample, the morphology of the template is successfully transferred on the ceramic system, with the cellulose‐derived fibers being converted to elemental carbon encased by a SiFeO(N,C) coating. Electron transparent cross‐sectional samples for transmission electron microscopy (TEM) were prepared from the ceramic papers, employing a standard ultramicrotomy slice cutting procedure, allowing for a detailed characterization of their in situ generated micro‐/nanostructure as well as occurring crystalline phases. TEM imaging and diffraction revealed that depending on pyrolysis temperature a different microstructure with a distinct phase assemblage is generated in the polymer‐derived ceramic papers. Crystallization from the polymer precursor starts with the precipitation of wüstite (Fe(1‐x)O) nanoparticles at 700°C inside the ceramic coating and secondary ε‐FexN at the fiber‐coating interface. Upon pyrolysis at 1000°C however, the sample primarily accommodates metallic α‐iron nanocrystals that impart ferromagnetic characteristics to the ceramic paper. The results show that the template‐assisted polymer‐derived ceramic route is a feasible approach in the production of complex ceramic compounds with fibrous paper‐like morphology. By adjusting the pyrolysis temperature, microstructure and phase composition of the ceramic paper can be conveniently tailored to the needs of its respective application. [ABSTRACT FROM AUTHOR]

Silage quality remains an important issue in farming, as do limitations in the range of products suitable for animal fodder. We therefore explored the microorganisms that are critical for the fermentation quality of paper mulberry silage. Low (unwilted) and high (wilted) dry matter (DM) paper mulberry were harvested at two cutting times. These were ensiled for 0, 3, 7, 14, and 56 days, respectively. Compared with unwilted silages, wilting significantly decreased (p < 0.05) silage pH value, ammonia‐N concentration, and yeast counts but increased (p < 0.05) lactic acid content. In addition, higher (p < 0.05) crude protein (CP) contents were also observed in wilted silages. Next‐generation sequencing (NGS) analysis revealed that wilting reduced the abundance of Enterobacter, while increasing that of Lactobacillus. Single‐molecule real‐time sequencing (SMRT) revealed that the silage was enriched in the lactic acid bacteria (LAB), Lactobacillus rhamnosus after wilting, which showed a positive correlation with CP and lactic acid content. We conclude that wilting may help preserve paper mulberry silage, facilitating its use as a new fodder resource. Moreover, L. rhamnosus has the potential to be developed as a new inoculant for the modulation in wilted silages, particularly paper mulberry silage. [ABSTRACT FROM AUTHOR]

Bio‐machine interface (BMI) is a crucial bridge for information exchange between living organisms and smart electronics. Flexible bio‐radar sensors, an important component of BMI devices, can measure spatial information of biological objects in real time and thus have attracted considerable attention owing to their wide applicability. However, in various practical scenarios, developing noncontact‐type flexible bio‐radar sensors for remote identification and detection of free‐behaving biological objects remains a challenge. To address this, paper‐based conducting polymer‐hydrogel (PCPH) bio‐radar sensors can be fabricated using a simple, low‐cost process. An intertwined core/shell microstructure of a conducting polymer‐hydrogel compound is formed on the fibers of the paper substrate. The resulting PCPH sensors exhibit a highly sensitive and spatial‐dependent response to a human finger based on an inductance mechanism. Attributed to the merits of the fabricated PCPH bio‐radars, complex behaviors of a human finger and hand using a customized multilevel security protection system and multichannel virtual piano system, respectively, are successfully detected. Furthermore, the detection limit of the PCPH sensors is verified by performing unattended monitoring and automatic analysis of the feeding and defensive behaviors of freely moving mice. These results prove the advantages of flexible PCPH bio‐radar sensors and demonstrate their application potential in BMIs. [ABSTRACT FROM AUTHOR]

Students and junior researchers are important stakeholders in scholarly publishing, but there is relatively little research into their reading needs and barriers. This study hoped to understand the similarities and differences between junior researchers and students, between this group and more senior researchers and between different disciplines. The research comprised two parts: initial interviews to ascertain the main barrier and needs items, followed by a large‐scale online survey. The survey received 673 responses from Chinese students and junior researchers. The survey revealed that poor presentation leading to poor understanding was a common barrier, but there were disciplinary differences, with humanities scholars having fewer barriers than other disciplines. Postgraduates reported more barriers than undergraduates, and also scored information needs more highly. The results identify needed improvements in the presentation of articles and explanation of terminology in order to better engage with students and junior researchers. [ABSTRACT FROM AUTHOR]

Patients experiencing homelessness visit the emergency department (ED) often and have worse clinical outcomes. Caring for this patient population is complex, challenging, and resource‐intensive. Emergency medicine (EM) education is lacking in formal curricula on the topic of homelessness, despite benefits for resident morale and patient care. Our goals were to identify a gap in EM education and training of the intersection of housing and health and propose educational topics and teaching methods to be included in residency curricula. Methodology was based on the development of a didactic session at the 2021 SAEM Annual Meeting. A needs assessment was performed through a review of medical education literature, a national survey of EM residency curricula, the individual curricula utilized by respective team members, and perspective from the team's own individual experiences with teaching about homelessness. Topics presented were chosen through discussion between the authors and determined to be common and relevant and cover a broad spectrum of content. The four presented topics included the intersection of COVID‐19 and housing, the impact of LGBTQIA+ status on homelessness, housing status related to health system utilization and health outcomes, and housing inequity as a means of perpetuating structural racism. Suggestions for education of these topics included case‐based learning, journal clubs, simulation, collaboration with social work, quality improvement projects, and engagement with community leaders. The ED is uniquely positioned to encounter the impacts of homelessness on health. Emergency physicians should be prepared to effectively care for these patients with complex social needs. Structured learning on this topic would benefit EM resident growth and lead to better patient care through improved screening, recognition of risk factors, and use of social resources. [ABSTRACT FROM AUTHOR]

X-ray spectroscopy is a valuable technique for the study of many materials systems. Characterizing reactions in situ and operando can reveal complex reaction kinetics, which is crucial to understanding active site composition and reaction mechanisms. In this project, the design, fabrication and testing of an open-source and easy-to-fabricate electrochemical cell for in situ electrochemistry compatible with X-ray absorption spectroscopy in both transmission and fluorescence modes are accomplished via windows with large opening angles on both the upstream and downstream sides of the cell. Using a hobbyist computer numerical control machine and free 3D CAD software, anyone can make a reliable electrochemical cell using this design. Onion-like carbon nanoparticles, with a 1:3 iron-to-cobalt ratio, were drop-coated onto carbon paper for testing in situ X-ray absorption spectroscopy. Cyclic voltammetry of the carbon paper showed the expected behavior, with no increased ohmic drop, even in sandwiched cells. Chronoamperometry was used to apply 0.4 V versus reversible hydrogen electrode, with and without 15 min of oxygen purging to ensure that the electrochemical cell does not provide any artefacts due to gas purging. The XANES and EXAFS spectra showed no differences with and without oxygen, as expected at 0.4 V, without any artefacts due to gas purging. The development of this open-source electrochemical cell design allows for improved collection of in situ X-ray absorption spectroscopy data and enables researchers to perform both transmission and fluorescence simultaneously. It additionally addresses key practical considerations including gas purging, reduced ionic resistance and leak prevention. [ABSTRACT FROM AUTHOR]

Raman spectroscopy has been widely used to measure thermophysical properties of 2D materials. The local intense photon heating induces strong thermal nonequilibrium between optical and acoustic phonons. Both first principle calculations and recent indirect Raman measurements prove this phenomenon. To date, no direct measurement of the thermal nonequilibrium between optical and acoustic phonons has been reported. Here, this physical phenomenon is directly characterized for the first time through a novel approach combining both electrothermal and optothermal techniques. While the optical phonon temperature is determined from Raman wavenumber, the acoustic phonon temperature is precisely determined using high‐precision thermal conductivity and laser power absorption that are measured with negligible nonequilibrium among energy carriers. For graphene paper, the energy coupling factor between in‐plane optical and overall acoustic phonons is found at (1.59–3.10) × 1015 W m−3 K−1, agreeing well with the quantum mechanical modeling result of 4.1 × 1015 W m−3 K−1. Under ≈1 µm diameter laser heating, the optical phonon temperature rise is over 80% higher than that of the acoustic phonons. This observation points out the importance of subtracting optical–acoustic phonon thermal nonequilibrium in Raman‐based thermal characterization. [ABSTRACT FROM AUTHOR]

Beamforming technique can effectively improve the spectrum utilization in the multi‐antenna systems, while the dirty‐paper coding (DPC) technique can reduce the inter‐user interference. In this letter, it is aimed to maximize the weighted sum‐rate under the total power constraint in the multiple‐input‐single‐output (MISO) system with the DPC technique. However, the existing methods of beamforming optimization mainly rely on customized iterative algorithms, which have high computational complexity. To address this issue, the beamforming neural network (BFNNet) is devised by utilizing the deep learning technique and the uplink‐downlink duality and exploring the optimal solution structure, which includes the deep neural network module and the signal processing module. Simulation results show that the BFNNet can achieve near‐optimal solutions and significantly reduce computational complexity. [ABSTRACT FROM AUTHOR]

To explore the aging assessment method of the oil–paper insulation in power transformers, the polarization and depolarization current (PDC) characteristics of oil–paper composite insulation samples are investigated under high applied voltage. Based on the asymmetry of polarization absorption current and depolarization current and the polarity effect of insulation pressboard, the repeated polarization current test method is proposed. A novel aging characteristic parameter, which is the ratio of the normalized charge for the first polarization and the normalized charge for the second polarization, is extracted. The difference between the decay rates of the first polarization current and the second polarization current increases at first and then decreases with the polarization time, and decreases with increasing aging degree of the pressboard. The more serious the insulation aging is, the smaller the variation range of aging characteristic parameter with polarization time is, and the closer the value is to 1. With decrease in the DP, the maximum of aging characteristic parameter changes in a decreasing trend. The aging condition of the oil–paper composite insulation can be assessed by the repeated polarization current method and the relationship between the aging characteristic parameter and the polarization time. [ABSTRACT FROM AUTHOR]

The heterocharge accumulated in the oil‐paper insulation system of the converter transformer will enhance the local electric field and cause insulation deterioration. Numerical simulation is an effective method to analyze heterocharge. Currently, the numerical simulation of heterocharge is mainly based on the bipolar charge transport (BCT) model and the impurity ion transport (IIT) model. However, the effects of temperature, conductivity, and thickness of oil‐impregnated paper on charge transport have not been considered in these models. In view of this, a modified charge transport (MCT) model by introducing the Maxwell–Wagner model and heat conduction equation is proposed in this paper based on the BCT model and IIT model. Then, the influence of multi‐factors (temperature gradient, moisture content, and oil‐impregnated paper thickness) on heterocharge accumulation is investigated by using the MCT model. The simulation results obtained by the MCT model are more consistent with the experimental results than the BCT model, which proves the accuracy and superiority of the MCT model. Moreover, the increase in temperature gradient, moisture content, and oil‐impregnated paper thickness will enlarge the ion dissociation rate, conductivity, and trap density, and thus promote the generation of heterocharge. In that respect, the MCT model is expected to optimize the insulation design and provide a reference for space charge dynamic simulation. [ABSTRACT FROM AUTHOR]

Considering that the working temperature is much higher in high‐voltage direct‐current (HVDC) convert transformers than in conventional AC transformers, the combination of thermally upgraded paper and natural ester might be a better choice to withstand high temperature in long‐term operation. This study compares the chemical structure, DC breakdown voltage, space charge and trap distribution of thermally upgraded paper aged in natural esters and mineral oil. The relationship between DC breakdown and accumulated charges was analyzed. Results show that the thermally upgraded paper aged in natural ester (NEI‐TUP) has a higher volume resistivity and DC breakdown voltage than that aged in mineral oil (MOI‐TUP). The NEI‐TUP group has a larger deep trap density than the MOI‐TUP group due to the chemical structure of natural ester. The larger deep trap density could contribute to the lower charge accumulation quantity and higher DC breakdown voltage. The thermally upgraded paper immersed in natural ester presents better insulation capability under thermal and DC electrical stress than that immersed in conventional mineral oil. This research indicated that the combination of thermally upgraded paper and natural ester might be a potential alternative for the mineral oil immersed paper in the future. [ABSTRACT FROM AUTHOR]

Stretchable micropower sources with high energy density and stability under repeated tensile deformation are key components of flexible/wearable microelectronics. Herein, through the combination of strain engineering and modulation of the interlayer spacing, freestanding and lightweight MXene/bacterial cellulose (BC) composite papers with excellent mechanical stability and a high electrochemical performance are first designed and prepared via a facile all-solution-based paper-making process. Following a simple laser-cutting kirigami patterning process, bendable, twistable, and stretchable all-solid-state micro-supercapacitor arrays (MSCAs) are further fabricated. As expected, benefiting from the high-performance MXene/BC composite electrodes and rational sectional structural design, the resulting kirigami MSCAs exhibit a high areal capacitance of 111.5 mF cm−2, and are stable upon stretching of up to 100% elongation, and in bent or twisted states. The demonstrated combination of an all-solution-based MXene/BC composite paper-making method and an easily manipulated laser-cutting kirigami patterning technique enables the fabrication of MXene-based deformableall-solid-state planar MSCAs in a simple and efficient manner while achieving excellent areal performance metrics and high stretchability, making them promising micropower sources that are compatible with flexible/wearable microelectronics. [ABSTRACT FROM AUTHOR]

These developments have the potential to foster additional innovation, facilitate future problem-solving and optimisation strategies, and ultimately contribute to mature OWC technologies. Keywords: optical communication; underwater optical wireless communication EN optical communication underwater optical wireless communication 87 90 4 08/24/23 20230801 NES 230801 Since 2011, optical wireless communication (OWC) technologies have gained momentum. These technologies include visible light communications (VLC), underwater VLC, Li-Fi, optical camera communications (OCC), visible light positioning, visible light sensing and free space optics, among others. [Extracted from the article]

Background: The adverse effect of excessive salt intake has been recognized in decades. Researchers have mainly focused on the association between salt intake and hypertension. However, studies in recent years have proposed the existence of extra‐renal sodium storage and provided insight into the immunomodulatory function of sodium. Objectives: In this review, we discuss the modulatory effects of high salt on various innate and adaptive immune cells and immune‐regulated diseases. Methods: We identified papers through electronic searches of PubMed database from inception to March 2022. Results: An increasing body of evidence has demonstrated that high salt can modulate the differentiation, activation and function of multiple immune cells. Furthermore, a high‐salt diet can increase tissue sodium concentrations and influence the immune responses in microenvironments, thereby affecting the development of immune‐regulated diseases, including hypertension, multiple sclerosis, cancer and infections. These findings provide a novel mechanism for the pathology of certain diseases and indicate that salt might serve as a target or potential therapeutic agent in different disease contexts. Conclusion: High salt has a profound impact on the differentiation, activation and function of multiple immune cells. Additionally, an HSD can modulate the development of various immune‐regulated diseases. [ABSTRACT FROM AUTHOR]

Coronavirus disease 2019 (COVID-19) first emerged in China in November 2019. Most governments have responded to the COVID-19 pandemic by imposing a lockdown. Some evidence suggests that a period of isolation might have led to a spike in alcohol misuse, and in the case of patients with alcohol use disorder (AUD), social isolation can favour lapse and relapse. The aim of our position paper is to provide specialists in the alcohol addiction field, in psychopharmacology, gastroenterology and in internal medicine, with appropriate tools to better manage patients with AUD and COVID-19,considering some important topics: (a) the susceptibility of AUD patients to infection; (b) the pharmacological interaction between medications used to treat AUD and to treat COVID-19; (c) the reorganization of the Centre for Alcohol Addiction Treatment for the management of AUD patients in the COVID-19 era (group activities, telemedicine, outpatients treatment, alcohol-related liver disease and liver transplantation, collecting samples); (d) AUD and SARS-CoV-2 vaccination. Telemedicine/telehealth will undoubtedly be useful/practical tools even though it remains at an elementary level; the contribution of the family and of caregivers in the management of AUD patients will play a significant role; the multidisciplinary intervention involving experts in the treatment of AUD with specialists in the treatment of COVID-19 disease will need implementation. Thus, the COVID-19 pandemic is rapidly leading addiction specialists towards a new governance scenario of AUD, which necessarily needs an in-depth reconsideration, focusing attention on a safe approach in combination with the efficacy of treatment. [ABSTRACT FROM AUTHOR]

The paper does not explicitly mention non-motor symptoms as part of the clinical presentation of ET, but extensively quotes other neurologists who reported that ET-patients are often clinically presenting with a névrose trémulante (C. Achard) or psychical degeneration associated with a neuropathic stock (F. Raymond). Interestingly, Critchley separates essential tremor into mild high frequency tremor (resembling thyrotoxic or psychogenic tremor), medium frequency tremor (resembling Parkinsonian tremor) and even low-frequency intention tremor. Since then, there are two studies reporting that ET families22 and early-onset ET patients23 have a longer life expectancy but larger series are lacking. [Extracted from the article]

The 2019 outbreak of coronavirus disease (COVID‐19) in Wuhan (Hubei province of China) has given rise to a pandemic spread of virus, more than 240 million incidences and a death toll larger than 5 million people. COVID‐19 has set off large efforts in research, therapy and patient care, as well as public and private debates in every imaginable form. A number of scientists used the publication platforms provided by the Federation of the European Biochemical Societies (FEBS) to present their research data, reviews, opinions and other contributions relating to COVID‐19 and severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2). Here, I highlight the recent COVID‐19 papers which have been published and collected in a Virtual Issue in FEBS Letters, and discuss their implications towards understanding the molecular, biochemical and cellular mechanisms of SARS‐CoV‐2 infections, vaccine development and antiviral discovery strategies. [ABSTRACT FROM AUTHOR]

Genetic cardiomyopathies are disorders of the cardiac muscle, most often explained by pathogenic mutations in genes encoding sarcomere, cytoskeleton, or ion channel proteins. Clinical phenotypes such as heart failure and arrhythmia are classically treated with generic drugs, but aetiology‐specific and targeted treatments are lacking. As a result, cardiomyopathies still present a major burden to society, and affect many young and older patients. The Translational Committee of the Heart Failure Association (HFA) and the Working Group of Myocardial Function of the European Society of Cardiology (ESC) organized a workshop to discuss recent advances in molecular and physiological studies of various forms of cardiomyopathies. The study of cardiomyopathies has intensified after several new study setups became available, such as induced pluripotent stem cells, three‐dimensional printing of cells, use of scaffolds and engineered heart tissue, with convincing human validation studies. Furthermore, our knowledge on the consequences of mutated proteins has deepened, with relevance for cellular homeostasis, protein quality control and toxicity, often specific to particular cardiomyopathies, with precise effects explaining the aberrations. This has opened up new avenues to treat cardiomyopathies, using contemporary techniques from the molecular toolbox, such as gene editing and repair using CRISPR‐Cas9 techniques, antisense therapies, novel designer drugs, and RNA therapies. In this article, we discuss the connection between biology and diverse clinical presentation, as well as promising new medications and therapeutic avenues, which may be instrumental to come to precision medicine of genetic cardiomyopathies. [ABSTRACT FROM AUTHOR]